Seagate FreeAgent DockStar support
start with sheevaplug configuration
add modifications by Alexander Holler <holler@ahsoftware.de>
change RAM definitions to one bank (128 MB)
change ident string and prompt
define MTD partitions and default environment variables
add support for LEDs
Signed-off-by: Eric Cooper <ecc@cmu.edu>
This commit is contained in:
Eric Cooper
Wolfgang Denk
parent
e81bb57f2d
commit
38041db740
|
|
@ -591,6 +591,10 @@ Po-Yu Chuang <ratbert@faraday-tech.com>
|
||||||
|
|
||||||
a320evb FA526 (ARM920T-like) (a320 SoC)
|
a320evb FA526 (ARM920T-like) (a320 SoC)
|
||||||
|
|
||||||
|
Eric Cooper <ecc@cmu.edu>
|
||||||
|
|
||||||
|
dockstar ARM926EJS (Kirkwood SoC)
|
||||||
|
|
||||||
George G. Davis <gdavis@mvista.com>
|
George G. Davis <gdavis@mvista.com>
|
||||||
|
|
||||||
assabet SA1100
|
assabet SA1100
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,54 @@
|
||||||
|
#
|
||||||
|
# Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
|
||||||
|
#
|
||||||
|
# Based on sheevaplug/Makefile originally written by
|
||||||
|
# Prafulla Wadaskar <prafulla@marvell.com>
|
||||||
|
# (C) Copyright 2009
|
||||||
|
# Marvell Semiconductor <www.marvell.com>
|
||||||
|
#
|
||||||
|
# See file CREDITS for list of people who contributed to this
|
||||||
|
# project.
|
||||||
|
#
|
||||||
|
# This program is free software; you can redistribute it and/or
|
||||||
|
# modify it under the terms of the GNU General Public License as
|
||||||
|
# published by the Free Software Foundation; either version 2 of
|
||||||
|
# the License, or (at your option) any later version.
|
||||||
|
#
|
||||||
|
# This program is distributed in the hope that it will be useful,
|
||||||
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
# GNU General Public License for more details.
|
||||||
|
#
|
||||||
|
# You should have received a copy of the GNU General Public License
|
||||||
|
# along with this program; if not, write to the Free Software
|
||||||
|
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||||
|
# MA 02110-1301 USA
|
||||||
|
#
|
||||||
|
|
||||||
|
include $(TOPDIR)/config.mk
|
||||||
|
|
||||||
|
LIB = $(obj)lib$(BOARD).o
|
||||||
|
|
||||||
|
COBJS := dockstar.o
|
||||||
|
|
||||||
|
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||||
|
OBJS := $(addprefix $(obj),$(COBJS))
|
||||||
|
SOBJS := $(addprefix $(obj),$(SOBJS))
|
||||||
|
|
||||||
|
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
|
||||||
|
$(call cmd_link_o_target, $(OBJS) $(SOBJS))
|
||||||
|
|
||||||
|
clean:
|
||||||
|
rm -f $(SOBJS) $(OBJS)
|
||||||
|
|
||||||
|
distclean: clean
|
||||||
|
rm -f $(LIB) core *.bak .depend
|
||||||
|
|
||||||
|
#########################################################################
|
||||||
|
|
||||||
|
# defines $(obj).depend target
|
||||||
|
include $(SRCTREE)/rules.mk
|
||||||
|
|
||||||
|
sinclude $(obj).depend
|
||||||
|
|
||||||
|
#########################################################################
|
||||||
|
|
@ -0,0 +1,181 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
|
||||||
|
*
|
||||||
|
* Based on sheevaplug.c originally written by
|
||||||
|
* Prafulla Wadaskar <prafulla@marvell.com>
|
||||||
|
* (C) Copyright 2009
|
||||||
|
* Marvell Semiconductor <www.marvell.com>
|
||||||
|
*
|
||||||
|
* See file CREDITS for list of people who contributed to this
|
||||||
|
* project.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 of
|
||||||
|
* the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||||
|
* MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <common.h>
|
||||||
|
#include <miiphy.h>
|
||||||
|
#include <asm/arch/kirkwood.h>
|
||||||
|
#include <asm/arch/mpp.h>
|
||||||
|
#include "dockstar.h"
|
||||||
|
|
||||||
|
DECLARE_GLOBAL_DATA_PTR;
|
||||||
|
|
||||||
|
int board_early_init_f(void)
|
||||||
|
{
|
||||||
|
/*
|
||||||
|
* default gpio configuration
|
||||||
|
* There are maximum 64 gpios controlled through 2 sets of registers
|
||||||
|
* the below configuration configures mainly initial LED status
|
||||||
|
*/
|
||||||
|
kw_config_gpio(DOCKSTAR_OE_VAL_LOW,
|
||||||
|
DOCKSTAR_OE_VAL_HIGH,
|
||||||
|
DOCKSTAR_OE_LOW, DOCKSTAR_OE_HIGH);
|
||||||
|
|
||||||
|
/* Multi-Purpose Pins Functionality configuration */
|
||||||
|
u32 kwmpp_config[] = {
|
||||||
|
MPP0_NF_IO2,
|
||||||
|
MPP1_NF_IO3,
|
||||||
|
MPP2_NF_IO4,
|
||||||
|
MPP3_NF_IO5,
|
||||||
|
MPP4_NF_IO6,
|
||||||
|
MPP5_NF_IO7,
|
||||||
|
MPP6_SYSRST_OUTn,
|
||||||
|
MPP7_GPO,
|
||||||
|
MPP8_UART0_RTS,
|
||||||
|
MPP9_UART0_CTS,
|
||||||
|
MPP10_UART0_TXD,
|
||||||
|
MPP11_UART0_RXD,
|
||||||
|
MPP12_SD_CLK,
|
||||||
|
MPP13_SD_CMD,
|
||||||
|
MPP14_SD_D0,
|
||||||
|
MPP15_SD_D1,
|
||||||
|
MPP16_SD_D2,
|
||||||
|
MPP17_SD_D3,
|
||||||
|
MPP18_NF_IO0,
|
||||||
|
MPP19_NF_IO1,
|
||||||
|
MPP20_GPIO,
|
||||||
|
MPP21_GPIO,
|
||||||
|
MPP22_GPIO,
|
||||||
|
MPP23_GPIO,
|
||||||
|
MPP24_GPIO,
|
||||||
|
MPP25_GPIO,
|
||||||
|
MPP26_GPIO,
|
||||||
|
MPP27_GPIO,
|
||||||
|
MPP28_GPIO,
|
||||||
|
MPP29_TSMP9,
|
||||||
|
MPP30_GPIO,
|
||||||
|
MPP31_GPIO,
|
||||||
|
MPP32_GPIO,
|
||||||
|
MPP33_GPIO,
|
||||||
|
MPP34_GPIO,
|
||||||
|
MPP35_GPIO,
|
||||||
|
MPP36_GPIO,
|
||||||
|
MPP37_GPIO,
|
||||||
|
MPP38_GPIO,
|
||||||
|
MPP39_GPIO,
|
||||||
|
MPP40_GPIO,
|
||||||
|
MPP41_GPIO,
|
||||||
|
MPP42_GPIO,
|
||||||
|
MPP43_GPIO,
|
||||||
|
MPP44_GPIO,
|
||||||
|
MPP45_GPIO,
|
||||||
|
MPP46_GPIO,
|
||||||
|
MPP47_GPIO,
|
||||||
|
MPP48_GPIO,
|
||||||
|
MPP49_GPIO,
|
||||||
|
0
|
||||||
|
};
|
||||||
|
kirkwood_mpp_conf(kwmpp_config);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
int board_init(void)
|
||||||
|
{
|
||||||
|
/*
|
||||||
|
* arch number of board
|
||||||
|
*/
|
||||||
|
gd->bd->bi_arch_number = MACH_TYPE_DOCKSTAR;
|
||||||
|
|
||||||
|
/* address of boot parameters */
|
||||||
|
gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef CONFIG_RESET_PHY_R
|
||||||
|
/* Configure and enable MV88E1116 PHY */
|
||||||
|
void reset_phy(void)
|
||||||
|
{
|
||||||
|
u16 reg;
|
||||||
|
u16 devadr;
|
||||||
|
char *name = "egiga0";
|
||||||
|
|
||||||
|
if (miiphy_set_current_dev(name))
|
||||||
|
return;
|
||||||
|
|
||||||
|
/* command to read PHY dev address */
|
||||||
|
if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
|
||||||
|
printf("Err..%s could not read PHY dev address\n",
|
||||||
|
__FUNCTION__);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Enable RGMII delay on Tx and Rx for CPU port
|
||||||
|
* Ref: sec 4.7.2 of chip datasheet
|
||||||
|
*/
|
||||||
|
miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
|
||||||
|
miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®);
|
||||||
|
reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
|
||||||
|
miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
|
||||||
|
miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
|
||||||
|
|
||||||
|
/* reset the phy */
|
||||||
|
miiphy_reset(name, devadr);
|
||||||
|
|
||||||
|
printf("88E1116 Initialized on %s\n", name);
|
||||||
|
}
|
||||||
|
#endif /* CONFIG_RESET_PHY_R */
|
||||||
|
|
||||||
|
#define GREEN_LED (1 << 14)
|
||||||
|
#define ORANGE_LED (1 << 15)
|
||||||
|
#define BOTH_LEDS (GREEN_LED | ORANGE_LED)
|
||||||
|
#define NEITHER_LED 0
|
||||||
|
|
||||||
|
static void set_leds(u32 leds, u32 blinking)
|
||||||
|
{
|
||||||
|
struct kwgpio_registers *r = (struct kwgpio_registers *)KW_GPIO1_BASE;
|
||||||
|
u32 oe = readl(&r->oe) | BOTH_LEDS;
|
||||||
|
writel(oe & ~leds, &r->oe); /* active low */
|
||||||
|
u32 bl = readl(&r->blink_en) & ~BOTH_LEDS;
|
||||||
|
writel(bl | blinking, &r->blink_en);
|
||||||
|
}
|
||||||
|
|
||||||
|
void show_boot_progress(int val)
|
||||||
|
{
|
||||||
|
switch (val) {
|
||||||
|
case 15: /* booting Linux */
|
||||||
|
set_leds(BOTH_LEDS, NEITHER_LED);
|
||||||
|
break;
|
||||||
|
case 64: /* Ethernet initialization */
|
||||||
|
set_leds(GREEN_LED, GREEN_LED);
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
if (val < 0) /* error */
|
||||||
|
set_leds(ORANGE_LED, ORANGE_LED);
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,44 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
|
||||||
|
*
|
||||||
|
* Based on sheevaplug.h originally written by
|
||||||
|
* Prafulla Wadaskar <prafulla@marvell.com>
|
||||||
|
* (C) Copyright 2009
|
||||||
|
* Marvell Semiconductor <www.marvell.com>
|
||||||
|
*
|
||||||
|
* See file CREDITS for list of people who contributed to this
|
||||||
|
* project.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 of
|
||||||
|
* the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||||
|
* MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __DOCKSTAR_H
|
||||||
|
#define __DOCKSTAR_H
|
||||||
|
|
||||||
|
#define DOCKSTAR_OE_LOW (~(0))
|
||||||
|
#define DOCKSTAR_OE_HIGH (~(0))
|
||||||
|
#define DOCKSTAR_OE_VAL_LOW (1 << 29) /* USB_PWEN low */
|
||||||
|
#define DOCKSTAR_OE_VAL_HIGH (1 << 17) /* LED pin high */
|
||||||
|
|
||||||
|
/* PHY related */
|
||||||
|
#define MV88E1116_LED_FCTRL_REG 10
|
||||||
|
#define MV88E1116_CPRSP_CR3_REG 21
|
||||||
|
#define MV88E1116_MAC_CTRL_REG 21
|
||||||
|
#define MV88E1116_PGADR_REG 22
|
||||||
|
#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
|
||||||
|
#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
|
||||||
|
|
||||||
|
#endif /* __DOCKSTAR_H */
|
||||||
|
|
@ -0,0 +1,165 @@
|
||||||
|
#
|
||||||
|
# Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
|
||||||
|
#
|
||||||
|
# Based on sheevaplug/kwbimage.cfg originally written by
|
||||||
|
# Prafulla Wadaskar <prafulla@marvell.com>
|
||||||
|
# (C) Copyright 2009
|
||||||
|
# Marvell Semiconductor <www.marvell.com>
|
||||||
|
#
|
||||||
|
# See file CREDITS for list of people who contributed to this
|
||||||
|
# project.
|
||||||
|
#
|
||||||
|
# This program is free software; you can redistribute it and/or
|
||||||
|
# modify it under the terms of the GNU General Public License as
|
||||||
|
# published by the Free Software Foundation; either version 2 of
|
||||||
|
# the License, or (at your option) any later version.
|
||||||
|
#
|
||||||
|
# This program is distributed in the hope that it will be useful,
|
||||||
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
# GNU General Public License for more details.
|
||||||
|
#
|
||||||
|
# You should have received a copy of the GNU General Public License
|
||||||
|
# along with this program; if not, write to the Free Software
|
||||||
|
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||||
|
# MA 02110-1301 USA
|
||||||
|
#
|
||||||
|
# Refer docs/README.kwimage for more details about how-to configure
|
||||||
|
# and create kirkwood boot image
|
||||||
|
#
|
||||||
|
|
||||||
|
# Boot Media configurations
|
||||||
|
BOOT_FROM nand
|
||||||
|
NAND_ECC_MODE default
|
||||||
|
NAND_PAGE_SIZE 0x0800
|
||||||
|
|
||||||
|
# SOC registers configuration using bootrom header extension
|
||||||
|
# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
|
||||||
|
|
||||||
|
# Configure RGMII-0 interface pad voltage to 1.8V
|
||||||
|
DATA 0xFFD100e0 0x1b1b1b9b
|
||||||
|
|
||||||
|
#Dram initalization for SINGLE x16 CL=5 @ 400MHz
|
||||||
|
DATA 0xFFD01400 0x43000c30 # DDR Configuration register
|
||||||
|
# bit13-0: 0xc30 (3120 DDR2 clks refresh rate)
|
||||||
|
# bit23-14: zero
|
||||||
|
# bit24: 1= enable exit self refresh mode on DDR access
|
||||||
|
# bit25: 1 required
|
||||||
|
# bit29-26: zero
|
||||||
|
# bit31-30: 01
|
||||||
|
|
||||||
|
DATA 0xFFD01404 0x37543000 # DDR Controller Control Low
|
||||||
|
# bit 4: 0=addr/cmd in smame cycle
|
||||||
|
# bit 5: 0=clk is driven during self refresh, we don't care for APX
|
||||||
|
# bit 6: 0=use recommended falling edge of clk for addr/cmd
|
||||||
|
# bit14: 0=input buffer always powered up
|
||||||
|
# bit18: 1=cpu lock transaction enabled
|
||||||
|
# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
|
||||||
|
# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
|
||||||
|
# bit30-28: 3 required
|
||||||
|
# bit31: 0=no additional STARTBURST delay
|
||||||
|
|
||||||
|
DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1)
|
||||||
|
# bit3-0: TRAS lsbs
|
||||||
|
# bit7-4: TRCD
|
||||||
|
# bit11- 8: TRP
|
||||||
|
# bit15-12: TWR
|
||||||
|
# bit19-16: TWTR
|
||||||
|
# bit20: TRAS msb
|
||||||
|
# bit23-21: 0x0
|
||||||
|
# bit27-24: TRRD
|
||||||
|
# bit31-28: TRTP
|
||||||
|
|
||||||
|
DATA 0xFFD0140C 0x00000a33 # DDR Timing (High)
|
||||||
|
# bit6-0: TRFC
|
||||||
|
# bit8-7: TR2R
|
||||||
|
# bit10-9: TR2W
|
||||||
|
# bit12-11: TW2W
|
||||||
|
# bit31-13: zero required
|
||||||
|
|
||||||
|
DATA 0xFFD01410 0x0000000d # DDR Address Control
|
||||||
|
# bit1-0: 00, Cs0width=x8
|
||||||
|
# bit3-2: 11, Cs0size=1Gb
|
||||||
|
# bit5-4: 00, Cs1width=nonexistent
|
||||||
|
# bit7-6: 00, Cs1size =nonexistent
|
||||||
|
# bit9-8: 00, Cs2width=nonexistent
|
||||||
|
# bit11-10: 00, Cs2size =nonexistent
|
||||||
|
# bit13-12: 00, Cs3width=nonexistent
|
||||||
|
# bit15-14: 00, Cs3size =nonexistent
|
||||||
|
# bit16: 0, Cs0AddrSel
|
||||||
|
# bit17: 0, Cs1AddrSel
|
||||||
|
# bit18: 0, Cs2AddrSel
|
||||||
|
# bit19: 0, Cs3AddrSel
|
||||||
|
# bit31-20: 0 required
|
||||||
|
|
||||||
|
DATA 0xFFD01414 0x00000000 # DDR Open Pages Control
|
||||||
|
# bit0: 0, OpenPage enabled
|
||||||
|
# bit31-1: 0 required
|
||||||
|
|
||||||
|
DATA 0xFFD01418 0x00000000 # DDR Operation
|
||||||
|
# bit3-0: 0x0, DDR cmd
|
||||||
|
# bit31-4: 0 required
|
||||||
|
|
||||||
|
DATA 0xFFD0141C 0x00000C52 # DDR Mode
|
||||||
|
# bit2-0: 2, BurstLen=2 required
|
||||||
|
# bit3: 0, BurstType=0 required
|
||||||
|
# bit6-4: 4, CL=5
|
||||||
|
# bit7: 0, TestMode=0 normal
|
||||||
|
# bit8: 0, DLL reset=0 normal
|
||||||
|
# bit11-9: 6, auto-precharge write recovery ????????????
|
||||||
|
# bit12: 0, PD must be zero
|
||||||
|
# bit31-13: 0 required
|
||||||
|
|
||||||
|
DATA 0xFFD01420 0x00000040 # DDR Extended Mode
|
||||||
|
# bit0: 0, DDR DLL enabled
|
||||||
|
# bit1: 0, DDR drive strenght normal
|
||||||
|
# bit2: 0, DDR ODT control lsd (disabled)
|
||||||
|
# bit5-3: 000, required
|
||||||
|
# bit6: 1, DDR ODT control msb, (disabled)
|
||||||
|
# bit9-7: 000, required
|
||||||
|
# bit10: 0, differential DQS enabled
|
||||||
|
# bit11: 0, required
|
||||||
|
# bit12: 0, DDR output buffer enabled
|
||||||
|
# bit31-13: 0 required
|
||||||
|
|
||||||
|
DATA 0xFFD01424 0x0000F17F # DDR Controller Control High
|
||||||
|
# bit2-0: 111, required
|
||||||
|
# bit3 : 1 , MBUS Burst Chop disabled
|
||||||
|
# bit6-4: 111, required
|
||||||
|
# bit7 : 0
|
||||||
|
# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz
|
||||||
|
# bit9 : 0 , no half clock cycle addition to dataout
|
||||||
|
# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals
|
||||||
|
# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh
|
||||||
|
# bit15-12: 1111 required
|
||||||
|
# bit31-16: 0 required
|
||||||
|
|
||||||
|
DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values)
|
||||||
|
DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values)
|
||||||
|
|
||||||
|
DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0
|
||||||
|
DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size
|
||||||
|
# bit0: 1, Window enabled
|
||||||
|
# bit1: 0, Write Protect disabled
|
||||||
|
# bit3-2: 00, CS0 hit selected
|
||||||
|
# bit23-4: ones, required
|
||||||
|
# bit31-24: 0x07, Size (i.e. 128MB)
|
||||||
|
|
||||||
|
DATA 0xFFD01508 0x10000000 # CS[1]n Base address to 256Mb
|
||||||
|
DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled
|
||||||
|
|
||||||
|
DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled
|
||||||
|
DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled
|
||||||
|
|
||||||
|
DATA 0xFFD01494 0x00030000 # DDR ODT Control (Low)
|
||||||
|
DATA 0xFFD01498 0x00000000 # DDR ODT Control (High)
|
||||||
|
# bit1-0: 00, ODT0 controlled by ODT Control (low) register above
|
||||||
|
# bit3-2: 01, ODT1 active NEVER!
|
||||||
|
# bit31-4: zero, required
|
||||||
|
|
||||||
|
DATA 0xFFD0149C 0x0000E803 # CPU ODT Control
|
||||||
|
DATA 0xFFD01480 0x00000001 # DDR Initialization Control
|
||||||
|
#bit0=1, enable DDR init upon this register write
|
||||||
|
|
||||||
|
# End of Header extension
|
||||||
|
DATA 0x0 0x0
|
||||||
|
|
@ -53,6 +53,7 @@ pm9261 arm arm926ejs - ronetix at91
|
||||||
pm9263 arm arm926ejs - ronetix at91
|
pm9263 arm arm926ejs - ronetix at91
|
||||||
suen3 arm arm926ejs km_arm keymile kirkwood
|
suen3 arm arm926ejs km_arm keymile kirkwood
|
||||||
rd6281a arm arm926ejs - Marvell kirkwood
|
rd6281a arm arm926ejs - Marvell kirkwood
|
||||||
|
dockstar arm arm926ejs - Seagate kirkwood
|
||||||
jadecpu arm arm926ejs jadecpu syteco mb86r0x
|
jadecpu arm arm926ejs jadecpu syteco mb86r0x
|
||||||
mx51evk arm armv7 mx51evk freescale mx5
|
mx51evk arm armv7 mx51evk freescale mx5
|
||||||
vision2 arm armv7 vision2 ttcontrol mx5
|
vision2 arm armv7 vision2 ttcontrol mx5
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,125 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
|
||||||
|
*
|
||||||
|
* Based on sheevaplug.h originally written by
|
||||||
|
* Prafulla Wadaskar <prafulla@marvell.com>
|
||||||
|
* (C) Copyright 2009
|
||||||
|
* Marvell Semiconductor <www.marvell.com>
|
||||||
|
*
|
||||||
|
* See file CREDITS for list of people who contributed to this
|
||||||
|
* project.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 of
|
||||||
|
* the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||||
|
* MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef _CONFIG_DOCKSTAR_H
|
||||||
|
#define _CONFIG_DOCKSTAR_H
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Version number information
|
||||||
|
*/
|
||||||
|
#define CONFIG_IDENT_STRING "\nSeagate FreeAgent DockStar"
|
||||||
|
|
||||||
|
/*
|
||||||
|
* High Level Configuration Options (easy to change)
|
||||||
|
*/
|
||||||
|
#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
|
||||||
|
#define CONFIG_KIRKWOOD 1 /* SOC Family Name */
|
||||||
|
#define CONFIG_KW88F6281 1 /* SOC Name */
|
||||||
|
#define CONFIG_MACH_DOCKSTAR /* Machine type */
|
||||||
|
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Commands configuration
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
|
||||||
|
#include <config_cmd_default.h>
|
||||||
|
#define CONFIG_CMD_DHCP
|
||||||
|
#define CONFIG_CMD_ENV
|
||||||
|
#define CONFIG_CMD_MII
|
||||||
|
#define CONFIG_CMD_NAND
|
||||||
|
#define CONFIG_CMD_PING
|
||||||
|
#define CONFIG_CMD_USB
|
||||||
|
/*
|
||||||
|
* mv-common.h should be defined after CMD configs since it used them
|
||||||
|
* to enable certain macros
|
||||||
|
*/
|
||||||
|
#include "mv-common.h"
|
||||||
|
|
||||||
|
#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */
|
||||||
|
#define CONFIG_SYS_PROMPT "DockStar> " /* Command Prompt */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Environment variables configurations
|
||||||
|
*/
|
||||||
|
#ifdef CONFIG_CMD_NAND
|
||||||
|
#define CONFIG_ENV_IS_IN_NAND 1
|
||||||
|
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
|
||||||
|
#else
|
||||||
|
#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
|
||||||
|
#endif
|
||||||
|
/*
|
||||||
|
* max 4k env size is enough, but in case of nand
|
||||||
|
* it has to be rounded to sector size
|
||||||
|
*/
|
||||||
|
#define CONFIG_ENV_SIZE 0x20000 /* 128k */
|
||||||
|
#define CONFIG_ENV_ADDR 0x60000
|
||||||
|
#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Default environment variables
|
||||||
|
*/
|
||||||
|
#define CONFIG_BOOTCOMMAND \
|
||||||
|
"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
|
||||||
|
"ubi part root; " \
|
||||||
|
"ubifsmount root; " \
|
||||||
|
"ubifsload 0x800000 ${kernel}; " \
|
||||||
|
"ubifsload 0x1100000 ${initrd}; " \
|
||||||
|
"bootm 0x800000 0x1100000"
|
||||||
|
|
||||||
|
#define CONFIG_MTDPARTS "mtdparts=orion_nand:1m(uboot),-(root)\0"
|
||||||
|
|
||||||
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||||
|
"console=console=ttyS0,115200\0" \
|
||||||
|
"mtdids=nand0=orion_nand\0" \
|
||||||
|
"mtdparts="CONFIG_MTDPARTS \
|
||||||
|
"kernel=/boot/uImage\0" \
|
||||||
|
"initrd=/boot/uInitrd\0" \
|
||||||
|
"bootargs_root=ubi.mtd=1 root=ubi0:root rootfstype=ubifs ro\0"
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Ethernet Driver configuration
|
||||||
|
*/
|
||||||
|
#ifdef CONFIG_CMD_NET
|
||||||
|
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
|
||||||
|
#define CONFIG_PHY_BASE_ADR 0
|
||||||
|
#endif /* CONFIG_CMD_NET */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* File system
|
||||||
|
*/
|
||||||
|
#define CONFIG_CMD_EXT2
|
||||||
|
#define CONFIG_CMD_FAT
|
||||||
|
#define CONFIG_CMD_JFFS2
|
||||||
|
#define CONFIG_CMD_UBI
|
||||||
|
#define CONFIG_CMD_UBIFS
|
||||||
|
#define CONFIG_RBTREE
|
||||||
|
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
|
||||||
|
#define CONFIG_MTD_PARTITIONS
|
||||||
|
#define CONFIG_CMD_MTDPARTS
|
||||||
|
#define CONFIG_LZO
|
||||||
|
|
||||||
|
#endif /* _CONFIG_DOCKSTAR_H */
|
||||||
Loading…
Reference in New Issue