Prepare v2010.09-rc1

Coding style cleanup.

Signed-off-by: Wolfgang Denk <wd@denx.de>

Makefile

@@ -22,9 +22,9 @@
 #
 
 VERSION = 2010
-PATCHLEVEL = 06
+PATCHLEVEL = 09
 SUBLEVEL =
-EXTRAVERSION =
+EXTRAVERSION = -rc1
 ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else

arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c

@@ -229,4 +229,3 @@ void at91_mci_hw_init(void)
 #endif
 }
 #endif
-

arch/arm/cpu/arm926ejs/at91/eflash.c

@@ -268,4 +268,3 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 	}
 	return 0;
 }
-

arch/arm/cpu/armv7/omap3/cache.S

@@ -181,4 +181,3 @@ setup_auxcr:
 	orrlt	r0, r0, #1 << 27
 	.word 0xE1600070			@ SMC
 	bx	lr
-

arch/arm/cpu/armv7/omap3/lowlevel_init.S

@@ -427,4 +427,3 @@ get_36x_core_dpll_param:
 get_36x_per_dpll_param:
 	adr	r0, per_36x_dpll_param
 	mov	pc, lr
-

arch/arm/cpu/armv7/omap4/board.c

@@ -98,4 +98,3 @@ int arch_cpu_init(void)
 	set_muxconf_regs();
 	return 0;
 }
-

arch/arm/cpu/armv7/omap4/lowlevel_init.S

@@ -45,4 +45,3 @@ lowlevel_init:
 	 */
 	bl	s_init
 	pop	{ip, pc}
-

arch/arm/cpu/armv7/omap4/sys_info.c

@@ -51,4 +51,3 @@ int print_cpuinfo(void)
 
 	return 0;
 }
-

board/pn62/cmd_pn62.c

@@ -83,7 +83,7 @@ int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	addr = simple_strtoul(argv[1], NULL, 16);
 	break;
     default:
-        return cmd_usage(cmdtp);
+	return cmd_usage(cmdtp);
     }
 
     printf ("## Ready for image download ...\n");

board/renesas/sh7785lcr/lowlevel_init.S

@@ -179,7 +179,7 @@ lbsc_end:
 	.align 4
 
 /*------- GPIO -------*/
-/* P{A,B C,D,E,F,G,L,P,Q,R}CR_D */ 
+/* P{A,B C,D,E,F,G,L,P,Q,R}CR_D */
 PXCR_D:		.word	0x0000
 
 PHCR_D:		.word	0x00c0

board/ti/panda/panda.h

@@ -262,4 +262,3 @@ const struct pad_conf_entry wkup_padconf_array[] = {
 };
 
 #endif
-

board/ti/sdp4430/sdp.h

@@ -262,4 +262,3 @@ const struct pad_conf_entry wkup_padconf_array[] = {
 };
 
 #endif
-

common/cmd_mmc.c

@@ -134,7 +134,7 @@ U_BOOT_CMD(
 	mmcinfo, 2, 0, do_mmcinfo,
 	"display MMC info",
 	"<dev num>\n"
-        "    - device number of the device to dislay info of\n"
+	"    - device number of the device to dislay info of\n"
 	""
 );
 

doc/README.atmel_mci

@@ -83,4 +83,3 @@ and the board definition files needs:
 #define CONFIG_ATMEL_MCI_PORTB		1	/* Atmel XE-EK uses port B */
 #define CONFIG_SYS_MMC_CD_PIN		AT91_PIN_PC9
 #define CONFIG_CMD_MMC			1
-

drivers/i2c/omap24xx_i2c.c

@@ -456,4 +456,3 @@ int i2c_get_bus_num(void)
 {
 	return (int) current_bus;
 }
-

drivers/power/twl4030.c

@@ -103,4 +103,3 @@ void twl4030_power_mmc_init(void)
 				TWL4030_PM_RECEIVER_VMMC1_DEV_GRP,
 				TWL4030_PM_RECEIVER_DEV_GRP_P1);
 }
-

include/configs/KUP4K.h

@@ -50,9 +50,9 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS						\
 "slot_a_boot=setenv bootargs root=/dev/sda2 ip=off;"				\
- "run addhw; mw.b 400000 00 80; diskboot 400000 0:1; bootm 400000\0"            \
+ "run addhw; mw.b 400000 00 80; diskboot 400000 0:1; bootm 400000\0"		\
 "slot_b_boot=setenv bootargs root=/dev/sda2 ip=off;"				\
- "run addhw; mw.b 400000 00 80; diskboot 400000 2:1; bootm 400000\0"            \
+ "run addhw; mw.b 400000 00 80; diskboot 400000 2:1; bootm 400000\0"		\
 "nfs_boot=mw.b 400000 00 80; dhcp; run nfsargs addip addhw; bootm 400000\0"	\
 "fat_boot=mw.b 400000 00 80; fatload ide 2:1 400000 st.bin; run addhw;		\
  bootm 400000 \0"								\
@@ -105,7 +105,7 @@
  * enable I2C and select the hardware/software driver
  */
 #undef	CONFIG_HARD_I2C		/* I2C with hardware support	*/
-#define	CONFIG_SOFT_I2C         /* I2C bit-banged		*/
+#define	CONFIG_SOFT_I2C		/* I2C bit-banged		*/
 
 #define CONFIG_SYS_I2C_SPEED	93000	/* 93 kHz is supposed to work */
 #define CONFIG_SYS_I2C_SLAVE	0xFE
@@ -250,10 +250,10 @@
  * Dynamic MTD partition support
  */
 #define MTDPARTS_DEFAULT	"mtdparts=40000000.flash:256k(u-boot),"	\
-                                                "64k(env),"		\
+						"64k(env),"		\
-                                                "128k(splash),"		\
+						"128k(splash),"		\
-                                                "512k(etc),"		\
+						"512k(etc),"		\
-                                                "64k(hw-info)"
+						"64k(hw-info)"
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
@@ -507,7 +507,7 @@
 #define CONFIG_AUTOBOOT_KEYED		/* use key strings to stop autoboot */
 #define CONFIG_AUTOBOOT_STOP_STR	"."
 #define CONFIG_SILENT_CONSOLE		1
-#define CONFIG_SYS_DEVICE_NULLDEV	1       /* enble null device            */
+#define CONFIG_SYS_DEVICE_NULLDEV	1       /* enble null device		*/
 #define CONFIG_VERSION_VARIABLE		1
 
 /* pass open firmware flat tree */
@@ -515,4 +515,3 @@
 #define CONFIG_OF_BOARD_SETUP	1
 
 #endif	/* __CONFIG_H */
-

include/configs/corenet_ds.h

@@ -73,7 +73,7 @@
 #define CONFIG_BACKSIDE_L2_CACHE
 #define CONFIG_SYS_INIT_L2CSR0		L2CSR0_L2E
 #define CONFIG_BTB			/* toggle branch predition */
-//#define	CONFIG_DDR_ECC
+/*#define	CONFIG_DDR_ECC*/
 #ifdef CONFIG_DDR_ECC
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE		0xdeadbeef