thermal: imx_thermal: rework driver to be reused

Rework imx_thermal driver to be used across i.MX
processor that support thermal sensor

Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
This commit is contained in:
Adrian Alonso 2015-09-02 13:54:13 -05:00 committed by Stefano Babic
parent 15c52b3ddd
commit 1368f99346
13 changed files with 28 additions and 26 deletions

View File

@ -38,7 +38,7 @@ struct scu_regs {
u32 fpga_rev;
};
#if defined(CONFIG_IMX6_THERMAL)
#if defined(CONFIG_IMX_THERMAL)
static const struct imx_thermal_plat imx6_thermal_plat = {
.regs = (void *)ANATOP_BASE_ADDR,
.fuse_bank = 1,

View File

@ -154,14 +154,12 @@ int print_cpuinfo(void)
u32 cpurev;
__maybe_unused u32 max_freq;
#if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL)
struct udevice *thermal_dev;
int cpu_tmp, minc, maxc, ret;
#endif
cpurev = get_cpu_rev();
#if defined(CONFIG_MX6)
#if defined(CONFIG_IMX_THERMAL)
struct udevice *thermal_dev;
int cpu_tmp, minc, maxc, ret;
printf("CPU: Freescale i.MX%s rev%d.%d",
get_imx_type((cpurev & 0xFF000) >> 12),
(cpurev & 0x000F0) >> 4,
@ -181,7 +179,7 @@ int print_cpuinfo(void)
mxc_get_clock(MXC_ARM_CLK) / 1000000);
#endif
#if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL)
#if defined(CONFIG_IMX_THERMAL)
puts("CPU: ");
switch (get_cpu_temp_grade(&minc, &maxc)) {
case TEMP_AUTOMOTIVE:

View File

@ -6,4 +6,4 @@
#
obj-$(CONFIG_DM_THERMAL) += thermal-uclass.o
obj-$(CONFIG_IMX6_THERMAL) += imx_thermal.o
obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o

View File

@ -41,7 +41,7 @@ struct thermal_data {
int maxc;
};
static int read_cpu_temperature(struct udevice *dev)
static int read_cpu_temperature_mx6(struct udevice *dev)
{
int temperature;
unsigned int reg, n_meas;
@ -129,13 +129,15 @@ int imx_thermal_get_temp(struct udevice *dev, int *temp)
struct thermal_data *priv = dev_get_priv(dev);
int cpu_tmp = 0;
cpu_tmp = read_cpu_temperature(dev);
if (is_soc_type(MXC_SOC_MX6))
cpu_tmp = read_cpu_temperature_mx6(dev);
while (cpu_tmp >= priv->critical) {
printf("CPU Temperature (%dC) too close to max (%dC)",
cpu_tmp, priv->maxc);
puts(" waiting...\n");
udelay(5000000);
cpu_tmp = read_cpu_temperature(dev);
if (is_soc_type(MXC_SOC_MX6))
cpu_tmp = read_cpu_temperature_mx6(dev);
}
*temp = cpu_tmp;
@ -157,10 +159,12 @@ static int imx_thermal_probe(struct udevice *dev)
/* Read Temperature calibration data fuse */
fuse_read(pdata->fuse_bank, pdata->fuse_word, &fuse);
/* Check for valid fuse */
if (fuse == 0 || fuse == ~0) {
printf("CPU: Thermal invalid data, fuse: 0x%x\n", fuse);
return -EPERM;
if (is_soc_type(MXC_SOC_MX6)) {
/* Check for valid fuse */
if (fuse == 0 || fuse == ~0) {
printf("CPU: Thermal invalid data, fuse: 0x%x\n", fuse);
return -EPERM;
}
}
/* set critical cooling temp */

View File

@ -33,10 +33,10 @@
#define CONFIG_CMD_BMODE
/* Thermal support */
#define CONFIG_IMX6_THERMAL
#define CONFIG_IMX_THERMAL
#define CONFIG_CMD_FUSE
#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX_THERMAL)
#define CONFIG_MXC_OCOTP
#endif

View File

@ -19,7 +19,7 @@
#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
#define CONFIG_IMX6_THERMAL
#define CONFIG_IMX_THERMAL
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)

View File

@ -57,7 +57,7 @@
#define CONFIG_CMD_GPIO
/* Thermal */
#define CONFIG_IMX6_THERMAL
#define CONFIG_IMX_THERMAL
/* Serial */
#define CONFIG_MXC_UART

View File

@ -14,7 +14,7 @@
#define CONFIG_SPL_MMC_SUPPORT
#include "imx6_spl.h"
#define CONFIG_IMX6_THERMAL
#define CONFIG_IMX_THERMAL
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
#define CONFIG_BOARD_EARLY_INIT_F

View File

@ -11,7 +11,7 @@
#include "mx6_common.h"
#define CONFIG_IMX6_THERMAL
#define CONFIG_IMX_THERMAL
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)

View File

@ -197,6 +197,6 @@
#define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC2*/
#endif
#define CONFIG_IMX6_THERMAL
#define CONFIG_IMX_THERMAL
#endif /* __CONFIG_H */

View File

@ -177,7 +177,7 @@
#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 1)
#endif
#define CONFIG_IMX6_THERMAL
#define CONFIG_IMX_THERMAL
#define CONFIG_CMD_TIME

View File

@ -241,6 +241,6 @@
#define CONFIG_FEC_DMA_MINALIGN 64
#endif
#define CONFIG_IMX6_THERMAL
#define CONFIG_IMX_THERMAL
#endif

View File

@ -20,7 +20,7 @@
#define CONFIG_SYS_HZ 1000
#define CONFIG_IMX6_THERMAL
#define CONFIG_IMX_THERMAL
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1