u-boot/arch/arm/mach-stm32/stm32f7/clock.c

285 lines
7.3 KiB
C
Raw Normal View History

/*
* (C) Copyright 2016
* Vikas Manocha, <vikas.manocha@st.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/rcc.h>
#include <asm/arch/stm32.h>
#include <asm/arch/stm32_periph.h>
#define RCC_CR_HSION (1 << 0)
#define RCC_CR_HSEON (1 << 16)
#define RCC_CR_HSERDY (1 << 17)
#define RCC_CR_HSEBYP (1 << 18)
#define RCC_CR_CSSON (1 << 19)
#define RCC_CR_PLLON (1 << 24)
#define RCC_CR_PLLRDY (1 << 25)
#define RCC_PLLCFGR_PLLM_MASK 0x3F
#define RCC_PLLCFGR_PLLN_MASK 0x7FC0
#define RCC_PLLCFGR_PLLP_MASK 0x30000
#define RCC_PLLCFGR_PLLQ_MASK 0xF000000
#define RCC_PLLCFGR_PLLSRC (1 << 22)
#define RCC_PLLCFGR_PLLM_SHIFT 0
#define RCC_PLLCFGR_PLLN_SHIFT 6
#define RCC_PLLCFGR_PLLP_SHIFT 16
#define RCC_PLLCFGR_PLLQ_SHIFT 24
#define RCC_CFGR_AHB_PSC_MASK 0xF0
#define RCC_CFGR_APB1_PSC_MASK 0x1C00
#define RCC_CFGR_APB2_PSC_MASK 0xE000
#define RCC_CFGR_SW0 (1 << 0)
#define RCC_CFGR_SW1 (1 << 1)
#define RCC_CFGR_SW_MASK 0x3
#define RCC_CFGR_SW_HSI 0
#define RCC_CFGR_SW_HSE RCC_CFGR_SW0
#define RCC_CFGR_SW_PLL RCC_CFGR_SW1
#define RCC_CFGR_SWS0 (1 << 2)
#define RCC_CFGR_SWS1 (1 << 3)
#define RCC_CFGR_SWS_MASK 0xC
#define RCC_CFGR_SWS_HSI 0
#define RCC_CFGR_SWS_HSE RCC_CFGR_SWS0
#define RCC_CFGR_SWS_PLL RCC_CFGR_SWS1
#define RCC_CFGR_HPRE_SHIFT 4
#define RCC_CFGR_PPRE1_SHIFT 10
#define RCC_CFGR_PPRE2_SHIFT 13
#define RCC_APB1ENR_PWREN (1 << 28)
/*
* RCC USART specific definitions
*/
#define RCC_ENR_USART1EN (1 << 4)
#define RCC_ENR_USART2EN (1 << 17)
#define RCC_ENR_USART3EN (1 << 18)
#define RCC_ENR_USART6EN (1 << 5)
/*
* Offsets of some PWR registers
*/
#define PWR_CR1_ODEN (1 << 16)
#define PWR_CR1_ODSWEN (1 << 17)
#define PWR_CSR1_ODRDY (1 << 16)
#define PWR_CSR1_ODSWRDY (1 << 17)
/*
* RCC GPIO specific definitions
*/
#define RCC_ENR_GPIO_A_EN (1 << 0)
#define RCC_ENR_GPIO_B_EN (1 << 1)
#define RCC_ENR_GPIO_C_EN (1 << 2)
#define RCC_ENR_GPIO_D_EN (1 << 3)
#define RCC_ENR_GPIO_E_EN (1 << 4)
#define RCC_ENR_GPIO_F_EN (1 << 5)
#define RCC_ENR_GPIO_G_EN (1 << 6)
#define RCC_ENR_GPIO_H_EN (1 << 7)
#define RCC_ENR_GPIO_I_EN (1 << 8)
#define RCC_ENR_GPIO_J_EN (1 << 9)
#define RCC_ENR_GPIO_K_EN (1 << 10)
struct pll_psc {
u8 pll_m;
u16 pll_n;
u8 pll_p;
u8 pll_q;
u8 ahb_psc;
u8 apb1_psc;
u8 apb2_psc;
};
#define AHB_PSC_1 0
#define AHB_PSC_2 0x8
#define AHB_PSC_4 0x9
#define AHB_PSC_8 0xA
#define AHB_PSC_16 0xB
#define AHB_PSC_64 0xC
#define AHB_PSC_128 0xD
#define AHB_PSC_256 0xE
#define AHB_PSC_512 0xF
#define APB_PSC_1 0
#define APB_PSC_2 0x4
#define APB_PSC_4 0x5
#define APB_PSC_8 0x6
#define APB_PSC_16 0x7
#if !defined(CONFIG_STM32_HSE_HZ)
#error "CONFIG_STM32_HSE_HZ not defined!"
#else
#if (CONFIG_STM32_HSE_HZ == 25000000)
#if (CONFIG_SYS_CLK_FREQ == 200000000)
/* 200 MHz */
struct pll_psc sys_pll_psc = {
.pll_m = 25,
.pll_n = 400,
.pll_p = 2,
.pll_q = 8,
.ahb_psc = AHB_PSC_1,
.apb1_psc = APB_PSC_4,
.apb2_psc = APB_PSC_2
};
#endif
#else
#error "No PLL/Prescaler configuration for given CONFIG_STM32_HSE_HZ exists"
#endif
#endif
int configure_clocks(void)
{
/* Reset RCC configuration */
setbits_le32(&STM32_RCC->cr, RCC_CR_HSION);
writel(0, &STM32_RCC->cfgr); /* Reset CFGR */
clrbits_le32(&STM32_RCC->cr, (RCC_CR_HSEON | RCC_CR_CSSON
| RCC_CR_PLLON));
writel(0x24003010, &STM32_RCC->pllcfgr); /* Reset value from RM */
clrbits_le32(&STM32_RCC->cr, RCC_CR_HSEBYP);
writel(0, &STM32_RCC->cir); /* Disable all interrupts */
/* Configure for HSE+PLL operation */
setbits_le32(&STM32_RCC->cr, RCC_CR_HSEON);
while (!(readl(&STM32_RCC->cr) & RCC_CR_HSERDY))
;
setbits_le32(&STM32_RCC->cfgr, ((
sys_pll_psc.ahb_psc << RCC_CFGR_HPRE_SHIFT)
| (sys_pll_psc.apb1_psc << RCC_CFGR_PPRE1_SHIFT)
| (sys_pll_psc.apb2_psc << RCC_CFGR_PPRE2_SHIFT)));
/* Configure the main PLL */
uint32_t pllcfgr = 0;
pllcfgr = RCC_PLLCFGR_PLLSRC; /* pll source HSE */
pllcfgr |= sys_pll_psc.pll_m << RCC_PLLCFGR_PLLM_SHIFT;
pllcfgr |= sys_pll_psc.pll_n << RCC_PLLCFGR_PLLN_SHIFT;
pllcfgr |= ((sys_pll_psc.pll_p >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT;
pllcfgr |= sys_pll_psc.pll_q << RCC_PLLCFGR_PLLQ_SHIFT;
writel(pllcfgr, &STM32_RCC->pllcfgr);
/* Enable the main PLL */
setbits_le32(&STM32_RCC->cr, RCC_CR_PLLON);
while (!(readl(&STM32_RCC->cr) & RCC_CR_PLLRDY))
;
/* Enable high performance mode, System frequency up to 200 MHz */
setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_PWREN);
setbits_le32(&STM32_PWR->cr1, PWR_CR1_ODEN);
/* Infinite wait! */
while (!(readl(&STM32_PWR->csr1) & PWR_CSR1_ODRDY))
;
/* Enable the Over-drive switch */
setbits_le32(&STM32_PWR->cr1, PWR_CR1_ODSWEN);
/* Infinite wait! */
while (!(readl(&STM32_PWR->csr1) & PWR_CSR1_ODSWRDY))
;
stm32_flash_latency_cfg(5);
clrbits_le32(&STM32_RCC->cfgr, (RCC_CFGR_SW0 | RCC_CFGR_SW1));
setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_SW_PLL);
while ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) !=
RCC_CFGR_SWS_PLL)
;
return 0;
}
unsigned long clock_get(enum clock clck)
{
u32 sysclk = 0;
u32 shift = 0;
/* Prescaler table lookups for clock computation */
u8 ahb_psc_table[16] = {
0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9
};
u8 apb_psc_table[8] = {
0, 0, 0, 0, 1, 2, 3, 4
};
if ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) ==
RCC_CFGR_SWS_PLL) {
u16 pllm, plln, pllp;
pllm = (readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLM_MASK);
plln = ((readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLN_MASK)
>> RCC_PLLCFGR_PLLN_SHIFT);
pllp = ((((readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLP_MASK)
>> RCC_PLLCFGR_PLLP_SHIFT) + 1) << 1);
sysclk = ((CONFIG_STM32_HSE_HZ / pllm) * plln) / pllp;
}
switch (clck) {
case CLOCK_CORE:
return sysclk;
break;
case CLOCK_AHB:
shift = ahb_psc_table[(
(readl(&STM32_RCC->cfgr) & RCC_CFGR_AHB_PSC_MASK)
>> RCC_CFGR_HPRE_SHIFT)];
return sysclk >>= shift;
break;
case CLOCK_APB1:
shift = apb_psc_table[(
(readl(&STM32_RCC->cfgr) & RCC_CFGR_APB1_PSC_MASK)
>> RCC_CFGR_PPRE1_SHIFT)];
return sysclk >>= shift;
break;
case CLOCK_APB2:
shift = apb_psc_table[(
(readl(&STM32_RCC->cfgr) & RCC_CFGR_APB2_PSC_MASK)
>> RCC_CFGR_PPRE2_SHIFT)];
return sysclk >>= shift;
break;
default:
return 0;
break;
}
}
void clock_setup(int peripheral)
{
switch (peripheral) {
case USART1_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_APB2ENR, RCC_ENR_USART1EN);
break;
case GPIO_A_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_A_EN);
break;
case GPIO_B_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_B_EN);
break;
case GPIO_C_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_C_EN);
break;
case GPIO_D_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_D_EN);
break;
case GPIO_E_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_E_EN);
break;
case GPIO_F_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_F_EN);
break;
case GPIO_G_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_G_EN);
break;
case GPIO_H_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_H_EN);
break;
case GPIO_I_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_I_EN);
break;
case GPIO_J_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_J_EN);
break;
case GPIO_K_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_K_EN);
break;
default:
break;
}
}