u-boot/doc/README.mips

55 lines
1.6 KiB
Plaintext
Raw Normal View History

Notes for the MIPS architecture port of U-Boot
Toolchains
----------
http://www.denx.de/wiki/DULG/ELDK
ELDK < DULG < DENX
http://www.emdebian.org/crosstools.html
Embedded Debian -- Cross-development toolchains
http://buildroot.uclibc.org/
Buildroot
Known Issues
------------
* Cache incoherency issue caused by do_bootelf_exec() at cmd_elf.c
Cache will be disabled before entering the loaded ELF image without
writing back and invalidating cache lines. This leads to cache
incoherency in most cases, unless the code gets loaded after U-Boot
re-initializes the cache. The more common uImage 'bootm' command does
not suffer this problem.
[workaround] To avoid this cache incoherency,
1) insert flush_cache(all) before calling dcache_disable(), or
2) fix dcache_disable() to do both flushing and disabling cache.
* Note that Linux users need to kill dcache_disable() in do_bootelf_exec()
or override do_bootelf_exec() not to disable I-/D-caches, because most
Linux/MIPS ports don't re-enable caches after entering kernel_entry.
TODOs
-----
* Probe CPU types, I-/D-cache and TLB size etc. automatically
* Secondary cache support missing
* Initialize TLB entries redardless of their use
* R2000/R3000 class parts are not supported
* Limited testing across different MIPS variants
* Due to cache initialization issues, the DRAM on board must be
initialized in board specific assembler language before the cache init
code is run -- that is, initialize the DRAM in lowlevel_init().
* centralize/share more CPU code of MIPS32, MIPS64 and XBurst
* support Qemu Malta