In fido the old autoload feature doesn't work anymore and we
need to remove it. Otherwise our sysmobts.service file will
create the /dev/dspl.. /dev/fpgadl... firmware upload files
and we all think that firmware loading is working.
It looks like a classic src != build dir issue of the
utility breaking the build on Yocto-Master. Try to fix
that.
ERROR: Function failed: do_install (log file is located at /home/builder/jenkins/workspace/Yocto-Master/label/OE/build/tmp/work/armv5e-poky-linux-gnueabi/rtl8169-eeprom/v0.0.1+gitAUTOINC+e62e515ce3-r0/temp/log.do_install.2455)
ERROR: Logfile of failure stored in: /home/builder/jenkins/workspace/Yocto-Master/label/OE/build/tmp/work/armv5e-poky-linux-gnueabi/rtl8169-eeprom/v0.0.1+gitAUTOINC+e62e515ce3-r0/temp/log.do_install.2455
Log data follows:
| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'arm-32', 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
| DEBUG: Executing shell function do_install
| install: cannot stat `/home/builder/jenkins/workspace/Yocto-Master/label/OE/build/tmp/work/armv5e-poky-linux-gnueabi/rtl8169-eeprom/v0.0.1+gitAUTOINC+e62e515ce3-r0/git/rtl8168-eeprom': No such file or directory
| WARNING: /home/builder/jenkins/workspace/Yocto-Master/label/OE/build/tmp/work/armv5e-poky-linux-gnueabi/rtl8169-eeprom/v0.0.1+gitAUTOINC+e62e515ce3-r0/temp/run.do_install.2455:1 exit 1 from
| install -m 0755 /home/builder/jenkins/workspace/Yocto-
From the obn-test config, I wrongly assumed that the inmarsat config should
be static on a vessel. Instead, we need to figure out a way to use dhcp with
linkmon.
The reverse dependency appears broken. Add a comment to
the recipes to warn us when updating. The issue does not
appear to exist in master of Yocto.
Related: SYS#1353
Barebox should be built like the kernel. We have to disable the target
userspace tools because they cannot be build using KERNEL_CC (which is
missing --sysroot=).
- remove file with wrong path to ifplugd
recipes-core/busybox/files/busybox-ifplugd.sh
DAEMON=/usr/bin/ifplugd vs. /usr/sbin/ifplugd
- use lambda expression for sysmobts/sysmobsc-kernel to
include busybox-ifplugd or not
- use different defconfig files between master
and dora to enable ifplugd or not
- use different interfaces files between master
and dora to enable auto stanza or not
for the dhcp interface
Fixes: SYS#868 and SYS#1535
[hfreyther: Try to pick an option less likely to break the
Dora support but allowing us to move forward. Not entirely
compile tested due IO load of the system]
* Disable ext2/ext3 (as ext4 can be used to mount them).
* Enable AUFS/Squshfs support
* Misc improvements (e.g. ARM optimized AES code, disable
drivers/frameworks unlikely to be used)
Jan prefers to store the fully extended .config file so we will
do it. One advantage is to more easily see what has changed between
two kernel versions.
cp ../build.sysmobts/tmp/work/sysmobts_v2-poky-linux-gnueabi/linux-sysmocom/3.10.80+gitAUTOINC+3122273386-r43/git/.config ./recipes-bsp/linux/files/sysmobts-v2/defconfig
cp ../build.sysmobts/tmp/work/sysmocom_odu-poky-linux-gnueabi/linux-sysmocom/3.2.63+gitAUTOINC+3ed283bea6-r41/git/.config ./recipes-bsp/linux/files/sysmocom-odu/defconfig
cp ../build.sysmobts/tmp/work/sysmocom_bsc-poky-linux/linux-sysmocom/3.10.80+gitAUTOINC+3122273386-r43/git/.config ./recipes-bsp/linux/files/sysmocom-bsc/defconfig
I think the last device we sold was in 2011 and I am not aware
if anyone has used it for the last couple of years. Remove it
to lower the complexity of the builds.
* add interface for connection to Inmarsat
* remove 'br0' and work directly with 'eth2' instead, to avoid bridges
in vlans of bridges
* bridge the video LAN also into the backbone (for later break-out)
linux-sysmocom_git.bb is used for the BTS, BSC and IDU. Let's
really use 3.10.76 (from 3.10.50 just rebased and not tested
on the device yet). This should fix the Yocto-Master build
tonight.
9610e792ffde7fb2599d19ca6d2a03230f2043c6 can not be found
in the linux-3.10.76 branch. Just avoid this branch game.
ERROR: Fetcher failure: Unable to find revision 9610e792ffde7fb2599d19ca6d2a03230f2043c6 in branch linux-3.10.76 even from upstream
ERROR: Function failed: Fetcher failure for URL: 'git://git.sysmocom.de/sysmo-bts/linux.git;protocol=git;branch=linux-3.10.76'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /home/builder/jenkins/workspace/Yocto-Master/label/OE/build/tmp/work/sysmobts_v2-poky-linux-gnueabi/linux-sysmocom/3.10.76+gitAUTOINC+9610e792ff-r43/temp/log.do_fetch.16350
NOTE: recipe linux-sysmocom-3.10.76+gitAUTOINC+9610e792ff-r43: task do_fetch: Failed
ERROR: Task 126 (/home/builder/jenkins/workspace/Yocto-Master/label/OE/meta-sysmocom-bsp/recipes-bsp/linux/linux-sysmocom_git.bb, do_fetch) failed with exit code '1
Holger Hans Peter Freyther
Henning Heinold
Jan Luebbe
Harald Welte
Neels Hofmeyr