* Disable ext2/ext3 (as ext4 can be used to mount them).
* Enable AUFS/Squshfs support
* Misc improvements (e.g. ARM optimized AES code, disable
drivers/frameworks unlikely to be used)
Jan prefers to store the fully extended .config file so we will
do it. One advantage is to more easily see what has changed between
two kernel versions.
cp ../build.sysmobts/tmp/work/sysmobts_v2-poky-linux-gnueabi/linux-sysmocom/3.10.80+gitAUTOINC+3122273386-r43/git/.config ./recipes-bsp/linux/files/sysmobts-v2/defconfig
cp ../build.sysmobts/tmp/work/sysmocom_odu-poky-linux-gnueabi/linux-sysmocom/3.2.63+gitAUTOINC+3ed283bea6-r41/git/.config ./recipes-bsp/linux/files/sysmocom-odu/defconfig
cp ../build.sysmobts/tmp/work/sysmocom_bsc-poky-linux/linux-sysmocom/3.10.80+gitAUTOINC+3122273386-r43/git/.config ./recipes-bsp/linux/files/sysmocom-bsc/defconfig
I think the last device we sold was in 2011 and I am not aware
if anyone has used it for the last couple of years. Remove it
to lower the complexity of the builds.
* add interface for connection to Inmarsat
* remove 'br0' and work directly with 'eth2' instead, to avoid bridges
in vlans of bridges
* bridge the video LAN also into the backbone (for later break-out)
linux-sysmocom_git.bb is used for the BTS, BSC and IDU. Let's
really use 3.10.76 (from 3.10.50 just rebased and not tested
on the device yet). This should fix the Yocto-Master build
tonight.
9610e792ffde7fb2599d19ca6d2a03230f2043c6 can not be found
in the linux-3.10.76 branch. Just avoid this branch game.
ERROR: Fetcher failure: Unable to find revision 9610e792ffde7fb2599d19ca6d2a03230f2043c6 in branch linux-3.10.76 even from upstream
ERROR: Function failed: Fetcher failure for URL: 'git://git.sysmocom.de/sysmo-bts/linux.git;protocol=git;branch=linux-3.10.76'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /home/builder/jenkins/workspace/Yocto-Master/label/OE/build/tmp/work/sysmobts_v2-poky-linux-gnueabi/linux-sysmocom/3.10.76+gitAUTOINC+9610e792ff-r43/temp/log.do_fetch.16350
NOTE: recipe linux-sysmocom-3.10.76+gitAUTOINC+9610e792ff-r43: task do_fetch: Failed
ERROR: Task 126 (/home/builder/jenkins/workspace/Yocto-Master/label/OE/meta-sysmocom-bsp/recipes-bsp/linux/linux-sysmocom_git.bb, do_fetch) failed with exit code '1
It seems like the kernel/package/upgrade/... proceess doesn't deal well
with the fact that some options used to be modules, which are now
built-in. Let's keep it as modules for the time being.
this enables conntrack events, ipset, ebtables, tc
scheduler/classifiers/ematches and much more.
it also disables the ATM code for which I don't think we have any use
case.
Create the /run/network directory for all of our systems. The
proper way with tmpfiles.d ends with a depedency mess that has
no point in being debugged.
My local build hasn't completed yet but we need to rush. Let the
CI test this change and we will see.
Related: SYS#1514
It looks like on my tests with the sysmobts I was saved by
busybox-ifplogd executing ifup again. I couldn't figure out
the dependencies between the LSB networking service and the
tmpfiles.d interaction. So instead of winning a beauty contest
we will need to create the directory by hand.
Cause: SYS#1514
Revert "ifupdown: Package the new file as well"
This reverts commit 15dc869cda.
Revert "ifupdown: Try the workdir for the files we copied"
This reverts commit 1ef790672e.
Revert "ifupdown: Create /run/network through a tmpfiles.d"
This reverts commit e0c7f3c621.
This way the ifupdown application will not only work
for the IDU/ODU but the BTS, BSC and any other machine
we want to build.
(untested OE modification)
To be able to talk to the equipment we need to set a route
after the link is up. Assume that no other (e.g. 3G) equipment
is using the same IPv4 address range.
Message-ID: 55279904.9020802@sysmocom.de
As pointed out by Harald the PR is lower than the package
that is already on the device. Bump it to 6 then.
Current:
opkg list_installed | grep ntp
ntp - 4.2.8p1-r5.0
ntp-tickadj - 4.2.8p1-r5.0
ntpdate - 4.2.8p1-r5.0
Import ntp 4.2.8 from meta-networking. Our version has some weird
dependency issues that create build breakages and more.
Remove the pps-tools dependency compared to meta-networking and
leave the ntp.conf as doneby Harald (e.g. drift on /etc and not
in /var...). Now I have not verified the upgrade path but I sadly
merged testing to stable when the ntp changes were comitted on
monday. This means I can't easily test the upgrade.
This new version of ntp has quite a number of changes, e.g.
certain utilities requiring perl, and some programs are now in
/usr/sbin rather than /usr/bin.
Jan Luebbe
Holger Hans Peter Freyther
Henning Heinold
Harald Welte