sysmobts-v1: Remove the v1 support of our old hardware config
I think the last device we sold was in 2011 and I am not aware if anyone has used it for the last couple of years. Remove it to lower the complexity of the builds.
This commit is contained in:
parent
4aabca2c30
commit
e8989345d2
|
@ -1,4 +1,3 @@
|
||||||
# This will set BTS_HW_VERSION depending on the machine
|
# This will set BTS_HW_VERSION depending on the machine
|
||||||
PACKAGE_ARCH = "${MACHINE_ARCH}"
|
PACKAGE_ARCH = "${MACHINE_ARCH}"
|
||||||
BTS_HW_VERSION_sysmobts-v1 = "-DHW_SYSMOBTS_V1"
|
|
||||||
BTS_HW_VERSION_sysmobts-v2 = "-DHW_SYSMOBTS_V2"
|
BTS_HW_VERSION_sysmobts-v2 = "-DHW_SYSMOBTS_V2"
|
||||||
|
|
|
@ -1,15 +0,0 @@
|
||||||
#@TYPE: Machine
|
|
||||||
#@NAME: sysmocom - systems for mobile communications GmbH GSM BTS
|
|
||||||
#@DESCRIPTION: sysmocom - systems for mobile communications GmbH GSM BTS
|
|
||||||
|
|
||||||
# Make sure we build these too
|
|
||||||
EXTRA_IMAGEDEPENDS = "dvnixload-native ubl u-boot sysmobts-firmware"
|
|
||||||
EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x20000 --pagesize=0x800 --no-cleanmarkers --pad=0x2000000 -n"
|
|
||||||
|
|
||||||
# ubifs config
|
|
||||||
MKUBIFS_ARGS = "-m 2048 -e 129024 -c 400"
|
|
||||||
UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
|
|
||||||
|
|
||||||
IMAGE_FSTYPES ?= "tar.bz2 jffs2"
|
|
||||||
require conf/machine/include/sysmobts.inc
|
|
||||||
|
|
|
@ -1,11 +0,0 @@
|
||||||
Welcome to
|
|
||||||
____ _______ _____
|
|
||||||
| _ \\__ __/ ____|
|
|
||||||
___ _ _ ___ _ __ ___ ___ | |_) | | | | (___
|
|
||||||
/ __| | | / __| '_ ` _ \\ / _ \\| _ < | | \\___ \\
|
|
||||||
\\__ \\ |_| \\__ \\ | | | | | (_) | |_) | | | ____) |
|
|
||||||
|___/\\__, |___/_| |_| |_|\\___/|____/ |_| |_____/
|
|
||||||
__/ |
|
|
||||||
|___/ by sysmocom GmbH
|
|
||||||
|
|
||||||
|
|
|
@ -1,11 +0,0 @@
|
||||||
Welcome to
|
|
||||||
____ _______ _____
|
|
||||||
| _ \\__ __/ ____|
|
|
||||||
___ _ _ ___ _ __ ___ ___ | |_) | | | | (___
|
|
||||||
/ __| | | / __| '_ ` _ \\ / _ \\| _ < | | \\___ \\
|
|
||||||
\\__ \\ |_| \\__ \\ | | | | | (_) | |_) | | | ____) |
|
|
||||||
|___/\\__, |___/_| |_| |_|\\___/|____/ |_| |_____/
|
|
||||||
__/ |
|
|
||||||
|___/ by sysmocom GmbH
|
|
||||||
|
|
||||||
|
|
|
@ -1,16 +0,0 @@
|
||||||
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
|
|
||||||
|
|
||||||
# The loopback interface
|
|
||||||
auto lo
|
|
||||||
iface lo inet loopback
|
|
||||||
|
|
||||||
#eth0 is our gateway to the network. ifplugd will run ifup/ifdown for us
|
|
||||||
iface eth0 inet dhcp
|
|
||||||
|
|
||||||
#eth0 will provide dhcp to clients
|
|
||||||
#auto eth0:1
|
|
||||||
#iface eth0:1 inet static
|
|
||||||
# address 10.42.123.1
|
|
||||||
# netmask 255.255.255.0
|
|
||||||
# network 10.42.123.0
|
|
||||||
|
|
File diff suppressed because it is too large
Load Diff
|
@ -4,9 +4,6 @@ require linux-sysmocom.inc
|
||||||
LINUX_VERSION ?= "3.2.48"
|
LINUX_VERSION ?= "3.2.48"
|
||||||
LINUX_VERSION_EXTENSION ?= "-sysmocom-${LINUX_KERNEL_TYPE}"
|
LINUX_VERSION_EXTENSION ?= "-sysmocom-${LINUX_KERNEL_TYPE}"
|
||||||
|
|
||||||
# Overrides for the sysmocom bts v1
|
|
||||||
BTS_FIRMWARE_NAME_sysmobts-v1 = "sysmobts-v1"
|
|
||||||
|
|
||||||
# Overrides for the sysmocom bts v2
|
# Overrides for the sysmocom bts v2
|
||||||
BTS_FIRMWARE_NAME_sysmobts-v2 = "sysmobts-v2"
|
BTS_FIRMWARE_NAME_sysmobts-v2 = "sysmobts-v2"
|
||||||
BTS_FIRMWARE_NAME_sysmobts-2050 = "sysmobts-v2"
|
BTS_FIRMWARE_NAME_sysmobts-2050 = "sysmobts-v2"
|
||||||
|
@ -27,12 +24,9 @@ SRC_URI = "git://git.sysmocom.de/sysmo-bts/linux.git;protocol=git;branch=${BRANC
|
||||||
file://defconfig"
|
file://defconfig"
|
||||||
S = "${WORKDIR}/git"
|
S = "${WORKDIR}/git"
|
||||||
|
|
||||||
COMPATIBLE_MACHINE = "(sysmobts-v1|sysmobts-v2|sysmobts-2050|sysmocom-odu)"
|
COMPATIBLE_MACHINE = "(sysmobts-v2|sysmobts-2050|sysmocom-odu)"
|
||||||
EXTRA_OEMAKE += "KALLSYMS_EXTRA_PASS=1"
|
EXTRA_OEMAKE += "KALLSYMS_EXTRA_PASS=1"
|
||||||
|
|
||||||
# we do not want to have the kernel image inside the kernel
|
|
||||||
FILES_kernel-image_sysmobts-v1 = ""
|
|
||||||
|
|
||||||
require linux-tools.inc
|
require linux-tools.inc
|
||||||
|
|
||||||
do_configure() {
|
do_configure() {
|
||||||
|
|
|
@ -7,9 +7,6 @@ DEPENDS += "bc-native"
|
||||||
LINUX_VERSION ?= "3.10.76"
|
LINUX_VERSION ?= "3.10.76"
|
||||||
LINUX_VERSION_EXTENSION ?= "-sysmocom-${LINUX_KERNEL_TYPE}"
|
LINUX_VERSION_EXTENSION ?= "-sysmocom-${LINUX_KERNEL_TYPE}"
|
||||||
|
|
||||||
# Overrides for the sysmocom bts v1
|
|
||||||
BTS_FIRMWARE_NAME_sysmobts-v1 = "sysmobts-v1"
|
|
||||||
|
|
||||||
# Overrides for the sysmocom bts v2
|
# Overrides for the sysmocom bts v2
|
||||||
BTS_FIRMWARE_NAME_sysmobts-v2 = "sysmobts-v2"
|
BTS_FIRMWARE_NAME_sysmobts-v2 = "sysmobts-v2"
|
||||||
|
|
||||||
|
@ -23,12 +20,9 @@ SRC_URI = "git://git.sysmocom.de/sysmo-bts/linux.git;protocol=git;branch=linux-3
|
||||||
|
|
||||||
S = "${WORKDIR}/git"
|
S = "${WORKDIR}/git"
|
||||||
|
|
||||||
COMPATIBLE_MACHINE = "(sysmobts-v1|sysmobts-v2|sysmocom-bsc)"
|
COMPATIBLE_MACHINE = "(sysmobts-v2|sysmocom-bsc)"
|
||||||
EXTRA_OEMAKE += "KALLSYMS_EXTRA_PASS=1"
|
EXTRA_OEMAKE += "KALLSYMS_EXTRA_PASS=1"
|
||||||
|
|
||||||
# we do not want to have the kernel image inside the kernel
|
|
||||||
FILES_kernel-image_sysmobts-v1 = ""
|
|
||||||
|
|
||||||
require linux-tools.inc
|
require linux-tools.inc
|
||||||
|
|
||||||
do_configure() {
|
do_configure() {
|
||||||
|
|
|
@ -1,41 +0,0 @@
|
||||||
#ping = 172.31.14.1
|
|
||||||
#ping = 172.26.1.255
|
|
||||||
#interface = eth0
|
|
||||||
#file = /var/log/messages
|
|
||||||
#change = 1407
|
|
||||||
|
|
||||||
# Uncomment to enable test. Setting one of these values to '0' disables it.
|
|
||||||
# These values will hopefully never reboot your machine during normal use
|
|
||||||
# (if your machine is really hung, the loadavg will go much higher than 25)
|
|
||||||
#max-load-1 = 24
|
|
||||||
#max-load-5 = 18
|
|
||||||
#max-load-15 = 12
|
|
||||||
|
|
||||||
# Note that this is the number of pages!
|
|
||||||
# To get the real size, check how large the pagesize is on your machine.
|
|
||||||
#min-memory = 1
|
|
||||||
|
|
||||||
#repair-binary = /usr/sbin/repair
|
|
||||||
#repair-timeout =
|
|
||||||
#test-binary =
|
|
||||||
#test-timeout =
|
|
||||||
|
|
||||||
watchdog-device = /dev/watchdog
|
|
||||||
|
|
||||||
# Defaults compiled into the binary
|
|
||||||
#temperature-device =
|
|
||||||
#max-temperature = 120
|
|
||||||
|
|
||||||
# Defaults compiled into the binary
|
|
||||||
#admin = root
|
|
||||||
#interval = 1
|
|
||||||
#logtick = 1
|
|
||||||
#log-dir = /var/log/watchdog
|
|
||||||
|
|
||||||
# This greatly decreases the chance that watchdog won't be scheduled before
|
|
||||||
# your machine is really loaded
|
|
||||||
realtime = yes
|
|
||||||
priority = 1
|
|
||||||
|
|
||||||
# Check if syslogd is still running by enabling the following line
|
|
||||||
#pidfile
|
|
|
@ -4,7 +4,6 @@ PRINC = "9"
|
||||||
|
|
||||||
inherit update-rc.d
|
inherit update-rc.d
|
||||||
|
|
||||||
SRC_URI_append_sysmobts-v1 = " file://watchdog.conf file://init"
|
|
||||||
SRC_URI_append_sysmobts-v2 = " file://watchdog.conf file://init"
|
SRC_URI_append_sysmobts-v2 = " file://watchdog.conf file://init"
|
||||||
SRC_URI_append_sysmobts-2050 = " file://watchdog.conf file://init"
|
SRC_URI_append_sysmobts-2050 = " file://watchdog.conf file://init"
|
||||||
|
|
||||||
|
|
|
@ -1,88 +0,0 @@
|
||||||
##############################################################################
|
|
||||||
#
|
|
||||||
# Sample ggsn configuration file
|
|
||||||
#
|
|
||||||
##############################################################################
|
|
||||||
|
|
||||||
# TAG: fg
|
|
||||||
# Include this flag if process is to run in the foreground
|
|
||||||
#
|
|
||||||
#fg
|
|
||||||
|
|
||||||
# TAG: debug
|
|
||||||
# Include this flag to include debug information.
|
|
||||||
#debug
|
|
||||||
|
|
||||||
|
|
||||||
# TAG: conf
|
|
||||||
# Configuration file to use. This file is the configuration file,
|
|
||||||
# so changing this parameter in the configuration file does not make
|
|
||||||
# sense. Use it on the command line instead.
|
|
||||||
|
|
||||||
# TAG: pidfile
|
|
||||||
# File to store information about the process id of the program.
|
|
||||||
# The program must have write access to this file/directory.
|
|
||||||
#pidfile /var/run/ggsn.pid
|
|
||||||
|
|
||||||
# TAG: statedir
|
|
||||||
# Directory to use for nonvolatile storage.
|
|
||||||
# The program must have write access to this directory.
|
|
||||||
#statedir /var/lib/ggsn/
|
|
||||||
|
|
||||||
|
|
||||||
# TAG: listen
|
|
||||||
# Specifies the local IP address to listen to
|
|
||||||
#listen 10.0.0.240
|
|
||||||
listen 10.23.123.1
|
|
||||||
|
|
||||||
# TAG: net
|
|
||||||
# IP network address of external packet data network
|
|
||||||
# Used to set up network interface.
|
|
||||||
net 10.23.42.0/24
|
|
||||||
|
|
||||||
# TAG: ipup
|
|
||||||
# Script executed after network interface has been brought up.
|
|
||||||
# Executed with the following parameters: <devicename> <ip address>
|
|
||||||
#ipup /etc/ggsn/ip-up
|
|
||||||
|
|
||||||
# TAG: ipdown
|
|
||||||
# Script executed after network interface has been taken down.
|
|
||||||
# Executed with the following parameters: <devicename> <ip address>
|
|
||||||
#ipdown /etc/ggsn/ip-down
|
|
||||||
|
|
||||||
# TAG: dynip
|
|
||||||
# Dynamic IP address pool.
|
|
||||||
# Used for allocation of dynamic IP address when address is not given
|
|
||||||
# by HLR.
|
|
||||||
# If this option is not given then the net option is used as a substitute.
|
|
||||||
#dynip 192.168.0.0/24
|
|
||||||
|
|
||||||
# TAG: statip
|
|
||||||
# Use of this tag is currently UNSUPPORTED
|
|
||||||
# Static IP address pool.
|
|
||||||
# Used for allocation of static IP address by means of HLR.
|
|
||||||
#statip 192.168.1.0/24
|
|
||||||
|
|
||||||
# TAG: pcodns1
|
|
||||||
# Protocol configuration option domain name system server 1.
|
|
||||||
pcodns1 8.8.8.8
|
|
||||||
|
|
||||||
# TAG: pcodns2
|
|
||||||
# Protocol configuration option domain name system server 2.
|
|
||||||
#pcodns2 0.0.0.0
|
|
||||||
|
|
||||||
# TAG: timelimit
|
|
||||||
# Exit after timelimit seconds.
|
|
||||||
# Setting timelimit to zero will cause the program not to exit.
|
|
||||||
#timelimit 0
|
|
||||||
|
|
||||||
# TAG: apn
|
|
||||||
# Use of this tag is EXPERIMENTAL
|
|
||||||
# Access point name to connect to when run in client mode.
|
|
||||||
#apn internet
|
|
||||||
|
|
||||||
# TAG: qos
|
|
||||||
# Use of this tag is EXPERIMENTAL
|
|
||||||
# Requested Quality of Service used when run in client mode.
|
|
||||||
# 3 bytes corresponding to ????
|
|
||||||
#qos 0x0b921f
|
|
|
@ -1,23 +0,0 @@
|
||||||
#!/bin/sh
|
|
||||||
|
|
||||||
NAME=gprs_routing
|
|
||||||
|
|
||||||
set -e
|
|
||||||
|
|
||||||
case "$1" in
|
|
||||||
start)
|
|
||||||
echo 1 > /proc/sys/net/ipv4/ip_forward
|
|
||||||
iptables -t nat -I POSTROUTING -o eth0 -j MASQUERADE
|
|
||||||
echo "Enabled masquerading"
|
|
||||||
;;
|
|
||||||
stop)
|
|
||||||
echo 0 > /proc/sys/net/ipv4/ip_forward
|
|
||||||
iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE
|
|
||||||
;;
|
|
||||||
*)
|
|
||||||
N=/etc/init.d/$NAME
|
|
||||||
echo "Usage: $N {start|stop|restart|force-reload}" >&2
|
|
||||||
exit 1
|
|
||||||
esac
|
|
||||||
|
|
||||||
exit 0
|
|
|
@ -1,43 +0,0 @@
|
||||||
# This file is part of systemd.
|
|
||||||
#
|
|
||||||
# systemd is free software; you can redistribute it and/or modify it
|
|
||||||
# under the terms of the GNU Lesser General Public License as published by
|
|
||||||
# the Free Software Foundation; either version 2.1 of the License, or
|
|
||||||
# (at your option) any later version.
|
|
||||||
#
|
|
||||||
# See systemd.conf(5) for details
|
|
||||||
|
|
||||||
[Manager]
|
|
||||||
#LogLevel=info
|
|
||||||
#LogTarget=journal-or-kmsg
|
|
||||||
#LogColor=yes
|
|
||||||
#LogLocation=no
|
|
||||||
#DumpCore=yes
|
|
||||||
#CrashShell=no
|
|
||||||
#ShowStatus=yes
|
|
||||||
#CrashChVT=1
|
|
||||||
#CPUAffinity=1 2
|
|
||||||
#DefaultControllers=cpu
|
|
||||||
#DefaultStandardOutput=journal
|
|
||||||
#DefaultStandardError=inherit
|
|
||||||
#JoinControllers=cpu,cpuacct,cpuset net_cls,net_prio
|
|
||||||
RuntimeWatchdogSec=45
|
|
||||||
ShutdownWatchdogSec=45
|
|
||||||
#CapabilityBoundingSet=
|
|
||||||
#TimerSlackNSec=
|
|
||||||
#DefaultLimitCPU=
|
|
||||||
#DefaultLimitFSIZE=
|
|
||||||
#DefaultLimitDATA=
|
|
||||||
#DefaultLimitSTACK=
|
|
||||||
#DefaultLimitCORE=
|
|
||||||
#DefaultLimitRSS=
|
|
||||||
#DefaultLimitNOFILE=
|
|
||||||
#DefaultLimitAS=
|
|
||||||
#DefaultLimitNPROC=
|
|
||||||
#DefaultLimitMEMLOCK=
|
|
||||||
#DefaultLimitLOCKS=
|
|
||||||
#DefaultLimitSIGPENDING=
|
|
||||||
#DefaultLimitMSGQUEUE=
|
|
||||||
#DefaultLimitNICE=
|
|
||||||
#DefaultLimitRTPRIO=
|
|
||||||
#DefaultLimitRTTIME=
|
|
|
@ -8,7 +8,6 @@ SRC_URI += "file://journald.conf \
|
||||||
file://0001-Feature-switch-ListenDatagram-from-run-systemd-journ.patch \
|
file://0001-Feature-switch-ListenDatagram-from-run-systemd-journ.patch \
|
||||||
"
|
"
|
||||||
|
|
||||||
SRC_URI_append_sysmobts-v1 = " file://system.conf"
|
|
||||||
SRC_URI_append_sysmobts-v2 = " file://system.conf"
|
SRC_URI_append_sysmobts-v2 = " file://system.conf"
|
||||||
SRC_URI_append_sysmocom-odu = " file://system.conf"
|
SRC_URI_append_sysmocom-odu = " file://system.conf"
|
||||||
|
|
||||||
|
|
|
@ -5,7 +5,6 @@ LICENSE = "CLOSED"
|
||||||
SRC_URI = "git://git.sysmocom.de/sysmo-bts/layer1-api.git;protocol=git;branch=master"
|
SRC_URI = "git://git.sysmocom.de/sysmo-bts/layer1-api.git;protocol=git;branch=master"
|
||||||
SRCREV = "84e0cf46511f256ef84c0211f3f39a642acceb33"
|
SRCREV = "84e0cf46511f256ef84c0211f3f39a642acceb33"
|
||||||
SRCREV_sysmobts-v2 = "84e0cf46511f256ef84c0211f3f39a642acceb33"
|
SRCREV_sysmobts-v2 = "84e0cf46511f256ef84c0211f3f39a642acceb33"
|
||||||
SRCREV_sysmobts-v1 = "4dde9443e2aa11868e46a67529cb5ac45462699c"
|
|
||||||
PV = "${SRCREV}+git${SRCPV}"
|
PV = "${SRCREV}+git${SRCPV}"
|
||||||
PR = "r5"
|
PR = "r5"
|
||||||
S = "${WORKDIR}/git"
|
S = "${WORKDIR}/git"
|
||||||
|
|
|
@ -1,15 +0,0 @@
|
||||||
COMPATIBLE_MACHINE = "sysmobts-v1"
|
|
||||||
FIRMWARE-VERSION = "femtobts_v${PV}"
|
|
||||||
PR = "r2.${INC_PR}"
|
|
||||||
|
|
||||||
require ${PN}.inc
|
|
||||||
|
|
||||||
do_install() {
|
|
||||||
install -d ${D}/lib/firmware/
|
|
||||||
|
|
||||||
install -m 0666 ${S}/Firmware/Dsp/femtobts.out ${D}/lib/firmware/sysmobts-v1.out
|
|
||||||
install -m 0666 ${S}/Firmware/Fpga/femtobts.bit ${D}/lib/firmware/sysmobts-v1.bit
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
FILES_${PN} = "/lib/firmware/sysmobts-v1*"
|
|
|
@ -8,7 +8,6 @@ LIC_FILES_CHKSUM = "file://ubl.c;beginline=1;endline=22;md5=806283bb3c475d9082e4
|
||||||
|
|
||||||
SRC_URI = "git://git.sysmocom.de/sysmo-bts/ubl;protocol=git;branch=master"
|
SRC_URI = "git://git.sysmocom.de/sysmo-bts/ubl;protocol=git;branch=master"
|
||||||
SRCREV = "0974846c2d2eb506d1443ee338aad4400f59bc70"
|
SRCREV = "0974846c2d2eb506d1443ee338aad4400f59bc70"
|
||||||
SRCREV_sysmobts-v1 = "d04f24974a5b1e24cb9414ebc2e84a91848982c4"
|
|
||||||
PV = "v0.2.11+git${SRCPV}"
|
PV = "v0.2.11+git${SRCPV}"
|
||||||
PR = "r3"
|
PR = "r3"
|
||||||
S = "${WORKDIR}/git"
|
S = "${WORKDIR}/git"
|
||||||
|
@ -20,7 +19,6 @@ EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX}"
|
||||||
UBL_IMAGE ?= "ubl-${MACHINE}-${PKGV}-${PKGR}.elf"
|
UBL_IMAGE ?= "ubl-${MACHINE}-${PKGV}-${PKGR}.elf"
|
||||||
UBL_SYMLINK ?= "ubl-${MACHINE}.elf"
|
UBL_SYMLINK ?= "ubl-${MACHINE}.elf"
|
||||||
|
|
||||||
BOARD_NAME_sysmobts-v1 = "sysmobts_v1"
|
|
||||||
BOARD_NAME_sysmobts-v2 = "sysmobts_v2"
|
BOARD_NAME_sysmobts-v2 = "sysmobts_v2"
|
||||||
|
|
||||||
do_compile() {
|
do_compile() {
|
||||||
|
|
|
@ -1,6 +1,5 @@
|
||||||
SRC_URI = "git://git.sysmocom.de/sysmo-bts/u-boot;branch=v2011.12;protocol=git"
|
SRC_URI = "git://git.sysmocom.de/sysmo-bts/u-boot;branch=v2011.12;protocol=git"
|
||||||
SRCREV = "71497512280c9eac9be739ae0ca20eb21556bb92"
|
SRCREV = "71497512280c9eac9be739ae0ca20eb21556bb92"
|
||||||
SRCREV_sysmobts-v1 = "40d74c99ac9d741857d1298617b186b1d4e148de"
|
|
||||||
PV = "v2011.12+git${SRCPV}"
|
PV = "v2011.12+git${SRCPV}"
|
||||||
S = "${WORKDIR}/git"
|
S = "${WORKDIR}/git"
|
||||||
|
|
||||||
|
@ -8,10 +7,9 @@ PRINC = "13"
|
||||||
|
|
||||||
LIC_FILES_CHKSUM = "file://README;beginline=1;endline=22;md5=5ba4218ac89af7846802d0348df3fb90"
|
LIC_FILES_CHKSUM = "file://README;beginline=1;endline=22;md5=5ba4218ac89af7846802d0348df3fb90"
|
||||||
|
|
||||||
UBOOT_MACHINE_sysmobts-v1 = "davinci_sysmobts_v1_config"
|
|
||||||
UBOOT_MACHINE_sysmobts-v2 = "davinci_sysmobts_v2_config"
|
UBOOT_MACHINE_sysmobts-v2 = "davinci_sysmobts_v2_config"
|
||||||
UBOOT_MACHINE_sysmobts-2050 = "davinci_sysmobts_v2_config"
|
UBOOT_MACHINE_sysmobts-2050 = "davinci_sysmobts_v2_config"
|
||||||
COMPATIBLE_MACHINE = "(sysmobts-v1|sysmobts-v2|sysmobts-2050)"
|
COMPATIBLE_MACHINE = "(sysmobts-v2|sysmobts-2050)"
|
||||||
|
|
||||||
UBOOT_IMAGE = "u-boot-${MACHINE}-${PV}-${PR}"
|
UBOOT_IMAGE = "u-boot-${MACHINE}-${PV}-${PR}"
|
||||||
UBOOT_SYMLINK = "u-boot-${MACHINE}"
|
UBOOT_SYMLINK = "u-boot-${MACHINE}"
|
||||||
|
|
Loading…
Reference in New Issue