Browse Source

openggsn-config: Add the GGSN configuration to this layer

hfreyther/master-next
Holger Hans Peter Freyther 9 years ago
parent
commit
d9150d375c
  1. 88
      recipes-config/openggsn-config/files/sysmobsc/ggsn.conf
  2. 23
      recipes-config/openggsn-config/files/sysmobsc/gprs_routing
  3. 88
      recipes-config/openggsn-config/files/sysmobts-v1/ggsn.conf
  4. 23
      recipes-config/openggsn-config/files/sysmobts-v1/gprs_routing
  5. 88
      recipes-config/openggsn-config/files/sysmobts-v2/ggsn.conf
  6. 23
      recipes-config/openggsn-config/files/sysmobts-v2/gprs_routing
  7. 20
      recipes-config/openggsn-config/gprs-routing_0.1.bb
  8. 11
      recipes-config/openggsn-config/sysmocom-ggsn-config_0.1.bb

88
recipes-config/openggsn-config/files/sysmobsc/ggsn.conf

@ -0,0 +1,88 @@
##############################################################################
#
# Sample ggsn configuration file
#
##############################################################################
# TAG: fg
# Include this flag if process is to run in the foreground
#
#fg
# TAG: debug
# Include this flag to include debug information.
#debug
# TAG: conf
# Configuration file to use. This file is the configuration file,
# so changing this parameter in the configuration file does not make
# sense. Use it on the command line instead.
# TAG: pidfile
# File to store information about the process id of the program.
# The program must have write access to this file/directory.
#pidfile /var/run/ggsn.pid
# TAG: statedir
# Directory to use for nonvolatile storage.
# The program must have write access to this directory.
#statedir /var/lib/ggsn/
# TAG: listen
# Specifies the local IP address to listen to
#listen 10.0.0.240
listen 10.23.123.1
# TAG: net
# IP network address of external packet data network
# Used to set up network interface.
net 10.23.42.0/24
# TAG: ipup
# Script executed after network interface has been brought up.
# Executed with the following parameters: <devicename> <ip address>
#ipup /etc/ggsn/ip-up
# TAG: ipdown
# Script executed after network interface has been taken down.
# Executed with the following parameters: <devicename> <ip address>
#ipdown /etc/ggsn/ip-down
# TAG: dynip
# Dynamic IP address pool.
# Used for allocation of dynamic IP address when address is not given
# by HLR.
# If this option is not given then the net option is used as a substitute.
#dynip 192.168.0.0/24
# TAG: statip
# Use of this tag is currently UNSUPPORTED
# Static IP address pool.
# Used for allocation of static IP address by means of HLR.
#statip 192.168.1.0/24
# TAG: pcodns1
# Protocol configuration option domain name system server 1.
pcodns1 8.8.8.8
# TAG: pcodns2
# Protocol configuration option domain name system server 2.
#pcodns2 0.0.0.0
# TAG: timelimit
# Exit after timelimit seconds.
# Setting timelimit to zero will cause the program not to exit.
#timelimit 0
# TAG: apn
# Use of this tag is EXPERIMENTAL
# Access point name to connect to when run in client mode.
#apn internet
# TAG: qos
# Use of this tag is EXPERIMENTAL
# Requested Quality of Service used when run in client mode.
# 3 bytes corresponding to ????
#qos 0x0b921f

23
recipes-config/openggsn-config/files/sysmobsc/gprs_routing

@ -0,0 +1,23 @@
#!/bin/sh
NAME=gprs_routing
set -e
case "$1" in
start)
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -I POSTROUTING -o eth0 -j MASQUERADE
echo "Enabled masquerading"
;;
stop)
echo 0 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE
;;
*)
N=/etc/init.d/$NAME
echo "Usage: $N {start|stop|restart|force-reload}" >&2
exit 1
esac
exit 0

88
recipes-config/openggsn-config/files/sysmobts-v1/ggsn.conf

@ -0,0 +1,88 @@
##############################################################################
#
# Sample ggsn configuration file
#
##############################################################################
# TAG: fg
# Include this flag if process is to run in the foreground
#
#fg
# TAG: debug
# Include this flag to include debug information.
#debug
# TAG: conf
# Configuration file to use. This file is the configuration file,
# so changing this parameter in the configuration file does not make
# sense. Use it on the command line instead.
# TAG: pidfile
# File to store information about the process id of the program.
# The program must have write access to this file/directory.
#pidfile /var/run/ggsn.pid
# TAG: statedir
# Directory to use for nonvolatile storage.
# The program must have write access to this directory.
#statedir /var/lib/ggsn/
# TAG: listen
# Specifies the local IP address to listen to
#listen 10.0.0.240
listen 10.23.123.1
# TAG: net
# IP network address of external packet data network
# Used to set up network interface.
net 10.23.42.0/24
# TAG: ipup
# Script executed after network interface has been brought up.
# Executed with the following parameters: <devicename> <ip address>
#ipup /etc/ggsn/ip-up
# TAG: ipdown
# Script executed after network interface has been taken down.
# Executed with the following parameters: <devicename> <ip address>
#ipdown /etc/ggsn/ip-down
# TAG: dynip
# Dynamic IP address pool.
# Used for allocation of dynamic IP address when address is not given
# by HLR.
# If this option is not given then the net option is used as a substitute.
#dynip 192.168.0.0/24
# TAG: statip
# Use of this tag is currently UNSUPPORTED
# Static IP address pool.
# Used for allocation of static IP address by means of HLR.
#statip 192.168.1.0/24
# TAG: pcodns1
# Protocol configuration option domain name system server 1.
pcodns1 8.8.8.8
# TAG: pcodns2
# Protocol configuration option domain name system server 2.
#pcodns2 0.0.0.0
# TAG: timelimit
# Exit after timelimit seconds.
# Setting timelimit to zero will cause the program not to exit.
#timelimit 0
# TAG: apn
# Use of this tag is EXPERIMENTAL
# Access point name to connect to when run in client mode.
#apn internet
# TAG: qos
# Use of this tag is EXPERIMENTAL
# Requested Quality of Service used when run in client mode.
# 3 bytes corresponding to ????
#qos 0x0b921f

23
recipes-config/openggsn-config/files/sysmobts-v1/gprs_routing

@ -0,0 +1,23 @@
#!/bin/sh
NAME=gprs_routing
set -e
case "$1" in
start)
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -I POSTROUTING -o eth0 -j MASQUERADE
echo "Enabled masquerading"
;;
stop)
echo 0 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE
;;
*)
N=/etc/init.d/$NAME
echo "Usage: $N {start|stop|restart|force-reload}" >&2
exit 1
esac
exit 0

88
recipes-config/openggsn-config/files/sysmobts-v2/ggsn.conf

@ -0,0 +1,88 @@
##############################################################################
#
# Sample ggsn configuration file
#
##############################################################################
# TAG: fg
# Include this flag if process is to run in the foreground
#
#fg
# TAG: debug
# Include this flag to include debug information.
#debug
# TAG: conf
# Configuration file to use. This file is the configuration file,
# so changing this parameter in the configuration file does not make
# sense. Use it on the command line instead.
# TAG: pidfile
# File to store information about the process id of the program.
# The program must have write access to this file/directory.
#pidfile /var/run/ggsn.pid
# TAG: statedir
# Directory to use for nonvolatile storage.
# The program must have write access to this directory.
#statedir /var/lib/ggsn/
# TAG: listen
# Specifies the local IP address to listen to
#listen 10.0.0.240
listen 10.23.123.1
# TAG: net
# IP network address of external packet data network
# Used to set up network interface.
net 10.23.42.0/24
# TAG: ipup
# Script executed after network interface has been brought up.
# Executed with the following parameters: <devicename> <ip address>
#ipup /etc/ggsn/ip-up
# TAG: ipdown
# Script executed after network interface has been taken down.
# Executed with the following parameters: <devicename> <ip address>
#ipdown /etc/ggsn/ip-down
# TAG: dynip
# Dynamic IP address pool.
# Used for allocation of dynamic IP address when address is not given
# by HLR.
# If this option is not given then the net option is used as a substitute.
#dynip 192.168.0.0/24
# TAG: statip
# Use of this tag is currently UNSUPPORTED
# Static IP address pool.
# Used for allocation of static IP address by means of HLR.
#statip 192.168.1.0/24
# TAG: pcodns1
# Protocol configuration option domain name system server 1.
pcodns1 8.8.8.8
# TAG: pcodns2
# Protocol configuration option domain name system server 2.
#pcodns2 0.0.0.0
# TAG: timelimit
# Exit after timelimit seconds.
# Setting timelimit to zero will cause the program not to exit.
#timelimit 0
# TAG: apn
# Use of this tag is EXPERIMENTAL
# Access point name to connect to when run in client mode.
#apn internet
# TAG: qos
# Use of this tag is EXPERIMENTAL
# Requested Quality of Service used when run in client mode.
# 3 bytes corresponding to ????
#qos 0x0b921f

23
recipes-config/openggsn-config/files/sysmobts-v2/gprs_routing

@ -0,0 +1,23 @@
#!/bin/sh
NAME=gprs_routing
set -e
case "$1" in
start)
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -I POSTROUTING -o eth0 -j MASQUERADE
echo "Enabled masquerading"
;;
stop)
echo 0 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE
;;
*)
N=/etc/init.d/$NAME
echo "Usage: $N {start|stop|restart|force-reload}" >&2
exit 1
esac
exit 0

20
recipes-config/openggsn-config/gprs-routing_0.1.bb

@ -0,0 +1,20 @@
DESCRIPTION = "OpenGGSN GPRS routing to the real world"
RDEPENDS = "iptables kernel-module-ipt-masquerade"
LICENSE = "MIT"
LIC_FILES_CHKSUM = "file://${COREBASE}/LICENSE;md5=3f40d7994397109285ec7b81fdeb3b58"
SRC_URI = "file://gprs_routing"
inherit update-rc.d
INITSCRIPT_PACKAGES = "${PN}"
INITSCRIPT_NAME_${PN} = "gprs_routing"
INITSCRIPT_PARAMS_${PN} = "defaults 28 28"
do_install() {
install -d ${D}${sysconfdir}/init.d
install -m 0755 ${WORKDIR}/gprs_routing ${D}${sysconfdir}/init.d/gprs_routing
}

11
recipes-config/openggsn-config/sysmocom-ggsn-config_0.1.bb

@ -0,0 +1,11 @@
DESCRIPTION = "OpenGGSN config by sysmocom"
SRC_URI = "file://ggsn.conf"
LICENSE = "closed"
LIC_FILES_CHKSUM = "file://${COREBASE}/LICENSE;md5=3f40d7994397109285ec7b81fdeb3b58"
do_install() {
install -d ${D}${sysconfdir}
install -m 0660 ${WORKDIR}/ggsn.conf ${D}${sysconfdir}/
}
CONFFILES_${PN} = "${sysconfdir}/ggsn.conf"
Loading…
Cancel
Save