Layer1 API for sysmoBTSv2
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
layer1-api/include/superfemto.h

678 lines
30 KiB

#ifndef SUPERFEMTO_H__
#define SUPERFEMTO_H__
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
/****************************************************************************
* Includes *
****************************************************************************/
#include <stdint.h>
#include "gsml1const.h"
#define SUPERFEMTO_API(x,y,z) ((x << 16) | (y << 8) | z)
#define SUPERFEMTO_API_VERSION SUPERFEMTO_API(5,1,0)
/****************************************************************************
* Const *
****************************************************************************/
/****************************************************************************
* Enum: SuperFemto_Status_t
************************************************************************//**
*
* Status used by the SuperFemto.
*
* @ingroup superfemto_api
*
****************************************************************************/
typedef GsmL1_Status_t SuperFemto_Status_t;
/****************************************************************************
* Enum : SuperFemto_PrimId_t
************************************************************************//**
*
* System management primitives.
*
* @ingroup superfemto_api
*
****************************************************************************/
typedef enum SuperFemto_PrimId_t
{
SuperFemto_PrimId_SystemInfoReq, ///< REQ: System information
SuperFemto_PrimId_SystemInfoCnf, ///< CNF: System information
SuperFemto_PrimId_SystemFailureInd, ///< IND: System failure indication
SuperFemto_PrimId_ActivateRfReq, ///< REQ: Activation of the RF section
SuperFemto_PrimId_ActivateRfCnf, ///< CNF: Activation of the RF section
SuperFemto_PrimId_DeactivateRfReq, ///< REQ: Deactivation of the RF section
SuperFemto_PrimId_DeactivateRfCnf, ///< CNF: Deactivation of the RF section
SuperFemto_PrimId_SetTraceFlagsReq, ///< REQ: Set the verbosity of the system
SuperFemto_PrimId_RfClockInfoReq, ///< REQ: Information about the RF clock sub-system
SuperFemto_PrimId_RfClockInfoCnf, ///< CNF: Returns the RF clock sub-system information
SuperFemto_PrimId_RfClockSetupReq, ///< REQ: Configure the RF clock sub-system
SuperFemto_PrimId_RfClockSetupCnf, ///< CNF: Confirm the configuration of the RF clock sub-system
SuperFemto_PrimId_Layer1ResetReq, ///< REQ: Trigger a reset of the GSM layer 1 library
SuperFemto_PrimId_Layer1ResetCnf, ///< CNF: Confirm that the GSM layer 1 library was reset
SuperFemto_PrimId_GetTxCalibTblReq, ///< REQ: Get the TX gain calibration table
SuperFemto_PrimId_GetTxCalibTblCnf, ///< CNF: Returns TX gain calibration table
SuperFemto_PrimId_SetTxCalibTblReq, ///< REQ: Set the TX gain calibration table
SuperFemto_PrimId_SetTxCalibTblCnf, ///< CNF: Confirm the use of the new TX gain calibration table
SuperFemto_PrimId_GetRxCalibTblReq, ///< REQ: Get the RX level calibration table
SuperFemto_PrimId_GetRxCalibTblCnf, ///< CNF: Returns RX level calibration table
SuperFemto_PrimId_SetRxCalibTblReq, ///< REQ: Set the RX level calibration table
SuperFemto_PrimId_SetRxCalibTblCnf, ///< CNF: Confirm the use of the new RX level calibration table
SuperFemto_PrimId_MuteRfReq, ///< REQ: Mute/Unmute the RF section
SuperFemto_PrimId_MuteRfCnf, ///< CNF: Confirm the mutin/unmiting of the the RF section
SuperFemto_PrimId_SetRxAttenReq, ///< REQ: Set the RX attenuation
SuperFemto_PrimId_SetRxAttenCnf, ///< CNF: Confirm the configuration of the RX attenuation
SuperFemto_PrimId_NUM
} SuperFemto_PrimId_t;
/****************************************************************************
* Enum : SuperFemto_ClkSrcId_t
************************************************************************//**
*
* Clock source intifiers.
*
* @ingroup superfemto_api
*
****************************************************************************/
typedef enum SuperFemto_ClkSrcId_t
{
// RF Diagnostic Primitives
SuperFemto_ClkSrcId_None = 0, ///< None
SuperFemto_ClkSrcId_Ocxo, ///< Optional on-board OCXO
SuperFemto_ClkSrcId_Tcxo, ///< Optional on-board TCXO
SuperFemto_ClkSrcId_External, ///< Multi-Trx external clock
SuperFemto_ClkSrcId_GpsPps, ///< GPS PPS
SuperFemto_ClkSrcId_Trx, ///< TRX clock
SuperFemto_ClkSrcId_Rx, ///< RX clock
SuperFemto_ClkSrcId_Edge, ///< Debug edge connector clock
SuperFemto_ClkSrcId_NetList ///< Network listening
} SuperFemto_ClkSrcId_t;
/****************************************************************************
* Types *
****************************************************************************/
/****************************************************************************
* Struct : SuperFemto_SystemInfoCnf_t
************************************************************************//**
*
* Structure is used to confirm the information about the system.
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_SystemInfoCnf
{
SuperFemto_Status_t status; ///< Status
struct
{
uint8_t major; ///< DSP firmware major version number
uint8_t minor; ///< DSP firmware minor version number
uint8_t build; ///< DSP firmware build version number
} dspVersion;
struct
{
uint8_t major; ///< FPGA firmware major version number
uint8_t minor; ///< FPGA firmware minor version number
uint8_t build; ///< FPGA firmware build version number
} fpgaVersion;
struct
{
uint8_t rev; ///< Board reversion number
uint8_t option; ///< Board option number
} boardVersion;
} SuperFemto_SystemInfoCnf_t;
/****************************************************************************
* Struct : SuperFemto_SystemFailureInd_t
************************************************************************//**
*
* Structure is used to indicate a system failure.
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_SystemFailureInd
{
SuperFemto_Status_t status; ///< Status
} SuperFemto_SysemFailureInd_t;
/****************************************************************************
* Struct : SuperFemto_ActivateRfReq_t
************************************************************************//**
*
* This primitive is used to request the activation the RF section of the system.
*
* @ingroup superfemto_api
*
***************************************************************************/
typedef struct SuperFemto_ActivateRfReq
{
// Maximum cell Size
uint8_t u8MaxCellSize; ///< Maximum cell size in qbits (1 qbit = 138.4 meters, max 90 qbits)
// Timing source (FN/TN)
struct
{
uint8_t u8TimSrc; ///< Timing source (0:Slave/Get timing from remote master BTS, 1:Master/Generates its own timing)
} timing;
// Message queue options
struct {
uint8_t u8UseTchMsgq; ///< Set to '1' to use a separate MSGQUEUE for TCH primitives
uint8_t u8UsePdtchMsgq; ///< Set to '1' to use a separate MSGQUEUE for PDTCH primitives
} msgq;
// RF options
struct
{
int iClkCor; ///< Clock correction value in PPB.
SuperFemto_ClkSrcId_t clkSrc; ///< Clock source (0:None, 1:OCXO, 2:TCXO, 3:External, 4:GPS PPS, 5:reserved, 6:RX, 7:Edge)
float fMaxTxPower; ///< Nominal maximum TX power in dBm
uint8_t u8UseExtAtten; ///< Use the external attenuator to control TX power (0:No, 1:Yes)
} rfTrx;
} SuperFemto_ActivateRfReq_t;
/****************************************************************************
* Struct : SuperFemto_ActivateRfCnf_t
************************************************************************//**
*
* This primitive is used to confirm the activation the RF section of the system.
*
* @ingroup superfemto_api
*
***************************************************************************/
typedef struct SuperFemto_ActivateRfCnf
{
SuperFemto_Status_t status; ///< Status
} SuperFemto_ActivateRfCnf_t;
/****************************************************************************
* Struct : SuperFemto_DeactivateRfCnf_t
************************************************************************//**
*
* This primitive is used to confirm the deactivation the RF section of the system.
*
* @ingroup superfemto_api
*
***************************************************************************/
typedef struct SuperFemto_DeactivateRfCnf
{
SuperFemto_Status_t status; ///< Status
} SuperFemto_DeactivateRfCnf_t;
/****************************************************************************
* Struct : SuperFemto_SetTraceFlagsReq_t
************************************************************************//**
*
* This primitive is used to setup the trace flag values.
*
* @ingroup superfemto_api_prim_dbg
*
***************************************************************************/
typedef struct SuperFemto_SetTraceFlagsReq
{
uint32_t u32Tf; ///< Trace flag level
} SuperFemto_SetTraceFlagsReq_t;
/****************************************************************************
* Struct : SuperFemto_RfClockInfoReq
************************************************************************//**
*
* This primitive is used to retrive information about the RF clock
*
* @ingroup superfemto_api_prim_dbg
*
***************************************************************************/
typedef struct SuperFemto_RfClockInfoReq
{
uint8_t u8RstClkCal; ///< Set to '1' to reset the calibration module
} SuperFemto_RfClockInfoReq_t;
/****************************************************************************
* Struct : SuperFemto_RfClockSetupReq
************************************************************************//**
*
* This primitive is used to configure the RF clock sub-system.
*
* @ingroup superfemto_api_prim_dbg
*
***************************************************************************/
typedef struct SuperFemto_RfClockSetupReq
{
// RF clock options
struct
{
int iClkCor; ///< Clock correction value in PPB.
SuperFemto_ClkSrcId_t clkSrc; ///< Clock source (0:None, 1:OCXO, 2:TCXO, 3:External, 4:GPS PPS, 5:reserved, 6:RX, 7:Edge)
} rfTrx;
// RF clock calibration
struct {
SuperFemto_ClkSrcId_t clkSrc; ///< Reference clock source (0:Off, 1:OCXO, 2:TCXO, 3:External, 4:GPS PPS, 5:reserved, 6:reserved, 7:Edge, 8:NL)
} rfTrxClkCal;
} SuperFemto_RfClockSetupReq_t;
/****************************************************************************
* Struct : SuperFemto_RfClockSetupCnf
************************************************************************//**
*
* This primitive is sent back to confirm the configuration of the RF clock sub-system.
*
* @ingroup superfemto_api_prim_dbg
*
***************************************************************************/
typedef struct SuperFemto_RfClockSetupCnf
{
SuperFemto_Status_t status; ///< Status of the RF-CLOCK-SETUP-REQ
} SuperFemto_RfClockSetupCnf_t;
/****************************************************************************
* Struct : SuperFemto_RfClockInfoCnf
************************************************************************//**
*
* This primitive is used to send back information on the RF clock sub-system.
*
* @ingroup superfemto_api_prim_dbg
*
***************************************************************************/
typedef struct SuperFemto_RfClockInfoCnf
{
// RF clock options
struct
{
int iClkCor; ///< Clock correction value in PPB.
SuperFemto_ClkSrcId_t clkSrc; ///< Clock source (0:None, 1:OCXO, 2:TCXO, 3:External, 4:GPS PPS, 5:reserved, 6:RX, 7:Edge)
} rfTrx;
// RF clock calibration
struct {
SuperFemto_ClkSrcId_t clkSrc; ///< Reference clock source (0:Off, 1:OCXO, 2:TCXO, 3:External, 4:GPS PPS, 5:reserved, 6:reserved, 7:Edge, 8:NL)
int iClkErr; ///< RF clock error (PPB).
int iClkErrRes; ///< Clock error resolution (PPT).
} rfTrxClkCal;
} SuperFemto_RfClockInfoCnf_t;
/****************************************************************************
* Struct : SuperFemto_Layer1ResetReq_t
************************************************************************//**
*
* Structure is used to request a reset of the layer 1 module.
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_Layer1ResetReq
{
uint32_t u32Reserved;
} SuperFemto_Layer1ResetReq_t;
/****************************************************************************
* Struct : SuperFemto_Layer1ResetCnf_t
************************************************************************//**
*
* Structure is used to confirm the reset of the layer 1 module.
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_Layer1ResetCnf
{
GsmL1_Status_t status;
} SuperFemto_Layer1ResetCnf_t;
/****************************************************************************
* Struct : SuperFemto_GetTxCalibTblReq_t
************************************************************************//**
*
* Structure is used to get the TX gain calibration table.
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_GetTxCalibTblReq
{
GsmL1_FreqBand_t freqBand; ///< GSM Frequency band
} SuperFemto_GetTxCalibTblReq_t;
/****************************************************************************
* Struct : SuperFemto_GetTxCalibTblCnf_t
************************************************************************//**
*
* Structure is used to returns the TX gain calibration table.
*
* TX_Gain = m[band] x (fTxPowerLevel + fGainCorrVsArfcn[band][arfcn]) + b[band]
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_GetTxCalibTblCnf
{
GsmL1_Status_t status;
GsmL1_FreqBand_t freqBand; ///< GSM Frequency band
float fTxGainGmsk[80]; ///< Gain setting for GMSK output level from +50dBm to -29 dBm
float fTx8PskCorr; ///< Gain adjustment for 8 PSK (default to +3.25 dB)
float fTxExtAttCorr[31]; ///< Gain adjustment for external attenuator (0:@1dB, 1:@2dB, ..., 31:@32dB)
float fTxRollOffCorr[374]; /**< Gain correction for each ARFCN
for GSM-850 : 0=128, 1:129, ..., 123:251, [124-373]:unused
for GSM-900 : 0=955, 1:956, ..., 70:1, ..., 317:956, [318-373]:unused
for DCS-1800: 0=512, 1:513, ..., 373:885
for PCS-1900: 0=512, 1:513, ..., 298:810, [299-373]:unused */
uint8_t u8DspMajVer; ///< DSP firmware major version (0 if unkown)
uint8_t u8DspMinVer; ///< DSP firmware minor version (0 if unkown)
uint8_t u8FpgaMajVer; ///< FPGA firmware major version (0 if unkown)
uint8_t u8FpgaMinVer; ///< FPGA firmware minor version (0 if unkown)
} SuperFemto_GetTxCalibTblCnf_t;
/****************************************************************************
* Struct : SuperFemto_SetTxCalibTblReq_t
************************************************************************//**
*
* Structure is used to set the TX gain calibration table.
*
* TX_Gain = m[band] x (fTxPowerLevel + fGainCorrVsArfcn[band][arfcn]) + b[band]
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_SetTxCalibTblReq
{
GsmL1_FreqBand_t freqBand; ///< GSM Frequency band
float fTxGainGmsk[80]; ///< Gain setting for GMSK output level from +50dBm to -29 dBm
float fTx8PskCorr; ///< Gain adjustment for 8 PSK (default to +3.25 dB)
float fTxExtAttCorr[31]; ///< Gain adjustment for external attenuator (0:@1dB, 1:@2dB, ..., 31:@32dB)
float fTxRollOffCorr[374]; /**< Gain correction for each ARFCN
for GSM-850 : 0=128, 1:129, ..., 123:251, [124-373]:unused
for GSM-900 : 0=955, 1:956, ..., 70:1, ..., 317:956, [318-373]:unused
for DCS-1800: 0=512, 1:513, ..., 373:885
for PCS-1900: 0=512, 1:513, ..., 298:810, [299-373]:unused */
uint8_t u8DspMajVer; ///< DSP firmware major version (0 if unkown)
uint8_t u8DspMinVer; ///< DSP firmware minor version (0 if unkown)
uint8_t u8FpgaMajVer; ///< FPGA firmware major version (0 if unkown)
uint8_t u8FpgaMinVer; ///< FPGA firmware minor version (0 if unkown)
} SuperFemto_SetTxCalibTblReq_t;
/****************************************************************************
* Struct : SuperFemto_SetTxCalibTblCnf_t
************************************************************************//**
*
* Structure is used to confirm the use of the new TX gain calibration table.
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_SetTxCalibTblCnf
{
GsmL1_Status_t status;
GsmL1_FreqBand_t freqBand; ///< GSM Frequency band
} SuperFemto_SetTxCalibTblCnf_t;
/****************************************************************************
* Struct : SuperFemto_GetRxCalibTblReq_t
************************************************************************//**
*
* Structure is used to get the RX level calibration table.
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_GetRxCalibTblReq
{
GsmL1_FreqBand_t freqBand; ///< GSM Frequency band
uint8_t bUplink; ///< Direction (0:Downlink, 1:Uplink)
} SuperFemto_GetRxCalibTblReq_t;
/****************************************************************************
* Struct : SuperFemto_GetRxCalibTblCnf_t
************************************************************************//**
*
* Structure is used to returns the RX level calibration table.
*
* RSSI = RxLevel + fRssiCorrVsArfcn[band][arfcn]
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_GetRxCalibTblCnf
{
GsmL1_Status_t status;
GsmL1_FreqBand_t freqBand; ///< GSM Frequency band
uint8_t bUplink; ///< Direction (0:Downlink, 1:Uplink)
float fExtRxGain; ///< External RX gain
float fRxMixGainCorr; ///< Mixer gain error compensation
float fRxLnaGainCorr[3]; ///< LNA gain error compensation (1:@-12 dB, 2:@-24 dB, 3:@-36 dB)
float fRxRollOffCorr[374]; /***< Frequency roll-off compensation
for GSM-850 : 0=128, 1:129, ..., 123:251, [124-373]:unused
for GSM-900 : 0=955, 1:956, ..., 70:1, ..., 317:956, [318-373]:unused
for DCS-1800: 0=512, 1:513, ..., 373:885
for PCS-1900: 0=512, 1:513, ..., 298:810, [299-373]:unused */
uint8_t u8IqImbalMode; ///< IQ imbalance mode (0:off, 1:on, 2:auto)
uint16_t u16IqImbalCorr[4]; ///< IQ imbalance compensation
uint8_t u8DspMajVer; ///< DSP firmware major version (0 if unkown)
uint8_t u8DspMinVer; ///< DSP firmware minor version (0 if unkown)
uint8_t u8FpgaMajVer; ///< FPGA firmware major version (0 if unkown)
uint8_t u8FpgaMinVer; ///< FPGA firmware minor version (0 if unkown)
} SuperFemto_GetRxCalibTblCnf_t;
/****************************************************************************
* Struct : SuperFemto_SetRxCalibTblReq_t
************************************************************************//**
*
* Structure is used to set the RX level calibration table.
*
* RSSI = RxLevel + fRssiCorrVsArfcn[band][arfcn]
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_SetRxCalibTblReq
{
GsmL1_FreqBand_t freqBand; ///< GSM Frequency band
uint8_t bUplink; ///< Direction (0:Downlink, 1:Uplink)
float fExtRxGain; ///< External RX gain
float fRxMixGainCorr; ///< Mixer gain error compensation
float fRxLnaGainCorr[3]; ///< LNA gain error compensation (1:@-12 dB, 2:@-24 dB, 3:@-36 dB)
float fRxRollOffCorr[374]; /***< Frequency roll-off compensation
for GSM-850 : 0=128, 1:129, ..., 123:251, [124-373]:unused
for GSM-900 : 0=955, 1:956, ..., 70:1, ..., 317:956, [318-373]:unused
for DCS-1800: 0=512, 1:513, ..., 373:885
for PCS-1900: 0=512, 1:513, ..., 298:810, [299-373]:unused */
uint8_t u8IqImbalMode; ///< IQ imbalance mode (0:off, 1:on, 2:auto)
uint16_t u16IqImbalCorr[4]; ///< IQ imbalance compensation
uint8_t u8DspMajVer; ///< DSP firmware major version (0 if unkown)
uint8_t u8DspMinVer; ///< DSP firmware minor version (0 if unkown)
uint8_t u8FpgaMajVer; ///< FPGA firmware major version (0 if unkown)
uint8_t u8FpgaMinVer; ///< FPGA firmware minor version (0 if unkown)
} SuperFemto_SetRxCalibTblReq_t;
/****************************************************************************
* Struct : SuperFemto_SetRxCalibTblCnf_t
************************************************************************//**
*
* Structure is used to confirm the use of the new RX level calibration table.
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_SetRxCalibTblCnf
{
GsmL1_Status_t status;
GsmL1_FreqBand_t freqBand; ///< GSM Frequency band
uint8_t bUplink; ///< Direction (0:Downlink, 1:Uplink)
} SuperFemto_SetRxCalibTblCnf_t;
/****************************************************************************
* Struct : SuperFemto_MuteRfReq_t
************************************************************************//**
*
* This primitive is used to configure the RF clock sub-system.
*
* @ingroup superfemto_api_prim_dbg
*
***************************************************************************/
typedef struct SuperFemto_MuteRfReq
{
uint8_t u8Mute[8]; ///< Timeslot mute flag (0:unmute, 1:mute)
} SuperFemto_MuteRfReq_t;
/****************************************************************************
* Struct : SuperFemto_MuteRfCnf_t
************************************************************************//**
*
* This primitive is sent back to confirm the configuration of the RF clock sub-system.
*
* @ingroup superfemto_api_prim_dbg
*
***************************************************************************/
typedef struct SuperFemto_MuteRfCnf
{
SuperFemto_Status_t status; ///< Status of the MUTE-RF-REQ
} SuperFemto_MuteRfCnf_t;
/****************************************************************************
* Struct : SuperFemto_SetRxAttenReq_t
************************************************************************//**
*
* This primitive is used to configure the RF receive attenuation.
*
* @ingroup superfemto_api_prim_dbg
*
***************************************************************************/
typedef struct SuperFemto_SetRxAttenReq
{
uint8_t u8Atten; ///< RX Attenuation: 0(default), 12, 24, 36 dB
} SuperFemto_SetRxAttenReq_t;
/****************************************************************************
* Struct : SuperFemto_SetRxAttenCnf_t
************************************************************************//**
*
* This primitive is sent back to confirm the configuration of the RF receive
* attenuation.
*
* @ingroup superfemto_api_prim_dbg
*
***************************************************************************/
typedef struct SuperFemto_SetRxAttenCnf
{
SuperFemto_Status_t status; ///< Status of the SET-RX-ATTEN-REQ
} SuperFemto_SetRxAttenCnf_t;
/****************************************************************************
* Struct : SuperFemto_Primt_t
************************************************************************//**
*
* System level primitive definition.
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_Prim
{
SuperFemto_PrimId_t id; ///< Primitive ID
union
{
SuperFemto_SystemInfoCnf_t systemInfoCnf; ///< CNF: System information
SuperFemto_SysemFailureInd_t sysemFailureInd; ///< IND: System failure indication
SuperFemto_ActivateRfReq_t activateRfReq; ///< REQ: Activation of the RF section
SuperFemto_ActivateRfCnf_t activateRfCnf; ///< CNF: Activation of the RF section
SuperFemto_DeactivateRfCnf_t deactivateRfCnf; ///< CNF: Deactivation of the RF section
SuperFemto_SetTraceFlagsReq_t setTraceFlagsReq; ///< REQ: Set the verbosity of the system
SuperFemto_RfClockInfoReq_t rfClockInfoReq; ///< REQ: Information about the RF clock sub-system
SuperFemto_RfClockInfoCnf_t rfClockInfoCnf; ///< CNF: Returns the RF clock sub-system information
SuperFemto_RfClockSetupReq_t rfClockSetupReq; ///< REQ: Configure the RF clock sub-system
SuperFemto_RfClockSetupCnf_t rfClockSetupCnf; ///< CNF: Confirm the configuration of the RF clock sub-system
SuperFemto_Layer1ResetReq_t layer1ResetReq; ///< REQ: Trigger a reset of the GSM layer 1 module
SuperFemto_Layer1ResetCnf_t layer1ResetCnf; ///< CNF: Confirm that the GSM layer 1 module was reset
SuperFemto_GetTxCalibTblReq_t getTxCalibTblReq; ///< REQ: Get the TX gain calibration table
SuperFemto_GetTxCalibTblCnf_t getTxCalibTblCnf; ///< CNF: Returns TX gain calibration table
SuperFemto_SetTxCalibTblReq_t setTxCalibTblReq; ///< REQ: Set the TX gain calibration table
SuperFemto_SetTxCalibTblCnf_t setTxCalibTblCnf; ///< CNF: Confirm the use of the new TX gain calibration table
SuperFemto_GetRxCalibTblReq_t getRxCalibTblReq; ///< REQ: Get the RX level calibration table
SuperFemto_GetRxCalibTblCnf_t getRxCalibTblCnf; ///< CNF: Returns RX level calibration table
SuperFemto_SetRxCalibTblReq_t setRxCalibTblReq; ///< REQ: Set the RX level calibration table
SuperFemto_SetRxCalibTblCnf_t setRxCalibTblCnf; ///< CNF: Confirm the use of the new RX level calibration table
SuperFemto_MuteRfReq_t muteRfReq; ///< REQ: Mute/Unmute the RF section
SuperFemto_MuteRfCnf_t muteRfCnf; ///< CNF: Confirm the mutin/unmiting of the the RF section
SuperFemto_SetRxAttenReq_t setRxAttenReq; ///< REQ: Set the RX attenuation
SuperFemto_SetRxAttenCnf_t setRxAttenCnf; ///< CNF: Confirm the configuration of the RX attenuation
} u;
} SuperFemto_Prim_t;
#ifdef _TMS320C6400
/****************************************************************************
* Public Functions *
****************************************************************************/
/****************************************************************************
* Function : SuperFemto_RxPrimCallback
************************************************************************//**
*
* SuperFemto primitive reception callback routine. Process primitives sent
* by the ARM processor.
*
* @param [in] pPrim
* Address of the buffer containing the received primitive.
*
* @return
* GsmL1_Status_Success or the error code
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
void SuperFemto_RxPrimCallback( SuperFemto_Prim_t *pPrim );
#endif // _TMS320C6400
#ifdef __cplusplus
}
#endif // extern "C"
#endif // SUPERFEMTO_H__