The Beagleboard xM requires x-load and u-boot to be installed
on the MMC as it has no NAND (as of rev B and onward).
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
uboot-omap3 appears to be fairly stale (last commit in April 2010) while
the upstream u-boot is making regular tagged releases. Add a new recipe
using the upstream u-boot repository.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
TI is now maintaining an upstream x-loader git repository and
sakoman will no longer be maintained. Current upstream
includes signGP and incorporates it into the Makefile. The new
Makefile ift target builds the universal MLO binary. The armv7-a
patch is included.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
The linux-yocto-rt kernel has been boot tested on qemux86-64. Unlock
the preferred provider for virtual/kernel so it can be selected and
used.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Add systemtap, a general-purpose script-directed dynamic tracing and
performance analysis tool for Linux.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
To reduce the time on sanity testing, we remove variable SHARE_IMAGE and use
a new variable TEST_SERIALIZE in local.conf. It is by default set to 1. Poky
will copy and boot the to-be tested image for only once. It will not remove
or kill the image and test cases will be serialized executed against the same
image. If it is set to 0, image is always be copied for each cases, which takes
much time. I had a experiment that latest qemuppc sato only takes 7 minutes to
finish 9 sanity test cases, which takes more than 20 minutes before.
I also removed sanity case "boot" from sato/sdk/lsb because the other cases for
these targets already cover the check point of "boot".
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
Enable beagleboard support for 2.6.37. The only non-kernel related
change for the board is to update the serial console designation.
The Beagleboard use omap serial driver, so we replace ttyS2 with ttyO2.
This is described in following link:
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg40838.html
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Update pseudo to the latest version to resolve a number of optimization defects.
The problems were present on both 64-bit and 32-bit systems, but generally only
caused issues on 32-bit hosts.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
The latest mesa 7.10 has dependency on GPLv3 library talloc, so it is still necessary to keep one old non-GPLv3 mesa.And the latest non-GPLv3 version is mesa 7.8.2, so this patch add it.
Signed-off-by: Yu Ke <ke.yu@intel.com>
- update license checksum due to commit "COPYING: add three missing authors listed in synaptics.c". the license type is unchanged.
- Pass correct "sdkdir" value for cross compiling
Signed-off-by: Yu Ke <ke.yu@intel.com>
- update license checksume due to the commit "COPYING: replace stub with actual copyright notice". it provide more accurate license info. the license type is unchanged.
Signed-off-by: Yu Ke <ke.yu@intel.com>
- LICENSE_CHECKSUM changed due to the commit "COPYING: replace stub with copyright notices". this commit add more accurate license info, and the license type is still MIT-X.
Signed-off-by: Yu Ke <ke.yu@intel.com>
- LICENSE checksum changes due to that "Sun's copyrights now belong to Oracle". it is corp name change only, the license is still MIT-X.
Signed-off-by: Yu Ke <ke.yu@intel.com>
Currently gcc-runtime installs the files, but actually gcc-runtime's
do_configure checks if the files are available, so before we build gcc-runtime,
we should have some recipe install the files first! -- currently
gcc-cross-intermediate actually does that(gcc-cross also installs the files,
but it installs into the gcc-build-internal* directory), but
gcc-cross-intermediate will have its own sysroot in future, after that,
gcc-runtime won't build. So let us add this new target recipe and move the
installation of the files from gcc-runtime into it.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
The switch to KARCH meant that the arch arm settings were not
being applied to all boards. This commit adds the new option
along with the existing one to cover all boards.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Updating the SRCREV to capture this commit to the 2.6.34 kernel:
linux-2.6-windriver: atom-pc-preempt_rt meta-data
The following patch adds support for the preempt_rt kernel type
for the atom-pc machine. It should be applied to the wrs_meta
branch.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Enable the parameters required for systemtap for all BSPs based
off the standard kernel type.
CONFIG_KPROBES=y
CONFIG_RELAY=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Fixes [BUGID #595]
Because of the QEMU booting slowness issue(see bug #646 and #618), autobuilder
may suffer a timeout issue when running sanity test. We introduce variable
SHARE_IMAGE here to fix the issue. It is by default set to 1. Poky will copy
latest built-out image and keep using it in sanity testing. If it is set to 0,
latest built-out image will be copied and tested for each case, which will take
much time.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
PACKAGE_ARCHS represents all compatible architectures for a given machine.
It makes no sense for this variable to change any task checksums as it doesn't
inject any machine dependency into any known task. Multimachine means machine
specific packages will be detected through other variables.
Before this patch, even native packaging tasks were ending up being marked as
machine specific.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The routerstation pro and mpc8315e-rdb have been validated
on 2.6.37 so we can switch their preference to linux-yocto
and update the machine compatibility to add them to the support
list.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Upgrade to 6c696cec3f264a9399241b6e648f58bc97117d49 which
includes fixes to the Makefile to allow for user override of
CC and AR via the environment as well as python SWIG wrapper
fixes.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
Fixes [BUGID: 620]
Update the SRCREVs to include the full 2.6.37 release plus the
forward port of the alternate RPC port patch. With this fix,
we can complete usermode NFS booting of all the qemu* targets.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Update the SRCREV to pickup changes to update the use of
WRS_* to be K* to provide more generic names for the
platform/board/kernel configuration options.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Updating to reflect the changes from Darren Hart:
[
linux-yocto-2.6.37: Add debugfs and ftrace features to standard ktype meta-data
ftrace provides low impact tracing facilities and should be made
available on the main kernel - as opposed to a debug or tracing
kernel which often add enough overhead to mask subtle bugs.
These features are available on the 2.6.34 yocto kernel.
Boot and trace-cmd tested on qemux86-64.
Signed-off-by: Darren Hart <darren@dvhart.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Fixes [BUGID #581]
The initial routerstation pro BSP went out with with command line
overrides enabled. We'd need to be able to set the command line
from Redbot, so we should disable the forcing of the built in
variant.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
configme used to be able to calculate the output/build directory
when branches were always <machine>-<kernel type>. Branch names
can now be widely different and to avoid embedding complexity
in the scripts it is easier to just pass ${B} from the build system
down to the scripts.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Current fetcher has annoying "SRCREVINACTION" deadlock,
which occurs when SRCREV=${AUTOREV}=@bb.fetch.get_srcrev():
get_srcrev()->setup_localpath()->srcrev_internal_helper()
->evaluate SRCREV->get_srcrev()
current fetcher resolve the deadlock by introducing a
"SRCREVINACTION" condition check. Althoguh it works, it is
indeed not clean.
This patch use antoehr idea to break the deadlock: break
the dependency among SRCREV and get_srcrev(), i.e. assign
a specific keyword "AUTOINC" to AUTOREV. when Fetcher meet
this keyword, it will check and set the latest revision to
urldata.revision. get_srcrev later can use the urldata.revision
for value evaluation(SRCPV etc). In this case, SRCREV no longer
depends on get_srcrev, and there is not deadlock anymore.
Signed-off-by: Yu Ke <ke.yu@intel.com>
This gets us closer to making including tune-<arch>.inc "just work".
Moving the TARGET_ARCH definitions is something for a follup patch.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart
Kevin Tian
Qing He
Scott Garman
Richard Purdie
Jingdong Lu
Tom Zanussi
Jiajun Xu
Bruce Ashfield
Saul Wold
Mark Hatle
Yu Ke
Dexuan Cui
Koen Kooi