Made changes to the poky.ent file to change the three variables
needed to build manuals for 1.4.
Made new entries in the manual revision history tables for the
five manuals that have them. Each entry shows the "TBD" release
coming up.
(From yocto-docs rev: f7f75a238d709698f1582ce22e209c09ee60581b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made minor changes as needed due to some new sections, links,
and capitalization standards.
(From yocto-docs rev: bc966e5a78dadd14ecf1896a36e40a9b256bae77)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the sections on the "Git Workflow" in Chapter 4 and
the "Patching the Kernel" section in Chapter 5 per Tom
Zanussi's review comments. Minor technical changes.
(From yocto-docs rev: fd8a291349c06328adebd37f8a9bbeaa49adb44c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this figure used to be at the end of the development manual.
I have removed it from both figures directories and taken
it out of the TARFILE list in the Makefile.
(From yocto-docs rev: ad8fcfc4bddb6bcee0e1a4ece78cd87ab0d51b6c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Updates to the Git Workflow section based on feedback from
Darren Hart. These changes simplify the flow and make it
generic.
* Updates to the lttng user space tool used from within
Eclipse. The legacy version of the tool is no longer supported
so it had to be edited out of the description and replaced
with the 2.0 version.
(From yocto-docs rev: 81d2b79035fc99f92364bfef2c76076738cbaa52)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Feedback from Paul Eggleton suggested to not use the linked
term "Source Directory" in the last paragraph of this section.
Reasoning being that it is mis-leading in this case. People
reading this will be thinking more along the lines of traditional
source code rather than our establishe "Source Directory" term,
which in the doc set refers to either the unpacked poky tarball
or the cloned poky Git repository.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: f9bfcdebf85481839df01442ee81c4c9e8ee559a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the release month in all the manual revision history
tables to say "October 2012" from "Sometime in 2012".
(From yocto-docs rev: 1fc9313fe6c69db3d8cece6d940f78a2f0dc8386)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Edits to get the patching the kernel section more sane.
* A tweak to the opening sentence of the compliance section to
rid it of the split-infinitives.
(From yocto-docs rev: 8e2ff293e85a602efd98aceb20da5a2ea5f2a34d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made changes to try and clean up the process.
(From yocto-docs rev: 9c4fbcb473dc594647ba8779162379a745f8f8d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made some general edits to the new "Patching the Kernel" section.
Also had to remove a couple of images no longer used in the section
from the Makefile "TARFILES" variable.
(From yocto-docs rev: ac61e22e2f89926fbbda56fbaa4384c3c5156360)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the temporary text in the new "Patching the Kernel" section
that was copied from the old appendix A. Fixed the PRINC variable
in the creating a new layer example.
(From yocto-docs rev: 3eba77a81d3460866638a2f2d6b7c27d9dd1a2be)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the "kernel-example-repos-generic.png" file as it describes
the bare clone method for kernel modification. We are removing
that from this manual.
(From yocto-docs rev: c25c4f662c2f8a83fd9b09583646be9dbe01424c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel workflow section was re-written to reflect that the
kernel appendix has been removed. Also, changes to the flow in
general no longer make reference to the bare clone and the copy
of the bare clone as a method used to modify the kernel.
Many links were modified in other manuals as well.
(From yocto-docs rev: 38adbcb00d4305029cfa94e5ef047da41823f021)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figure that shows the bare clone and the copy of the bare
clone are no longer needed. The description for the kernel
workflow has been reduced to discussing only modification of
the temporary source files. We are no longer talking about
creating a bare clone and copying it as a way to modify the
kernel in this manual. That topic will be described elsewhere.
(From yocto-docs rev: f6a25e5e3763ea7a1f8a81ce377e3b520143b852)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Common Tasks" chapter is better suited as the last chapter in
this manual. So I moved the development workflows up a chapter.
(From yocto-docs rev: 19f0a6411c065388b5bd0083338b164b43baff0e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel example appendix is now gone.
(From yocto-docs rev: d744e76034ff2711a8c40b9bb1982971d28a04b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel example appendix is being removed. This broke a lot
of links. For now I have moved the information into a new section
called "Patching the Kernel". I have preserved the information
by adding the old appendix file as kerne-appendix-orig.xml.
(From yocto-docs rev: 994235a69362dfb0114ef9001ea7f2f2e2fdc5c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Eliminated the section A.2, which had an example of how to use
menuconfig in the kerenl example appendix. The information is
now merged into the similar section in Chapter 4 "Common
Tasks." It was decided that the Appendix A examples in the
manual were too detailed for a general development guide.
(From yocto-docs rev: f88ec421b257657f02cc0f132ec2580c17f07cef)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this statement in the linux-yocto-3.4.bbappend file needs to
have the comment removed so the source can be found.
(From yocto-docs rev: 821162221818f5ce53bb903aeef57c85314f5083)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the Kernel example appendix I changed some remaining 3.2
kernel strings to 3.4. Also I added the OE_INIT_FILE variable
from poky.ent for use instead of the "oe-init-build-env" string.
(From yocto-docs rev: 1d9d8d72d197bdd81756eed7fe1529f341de6089)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Each time the kernel revision is bumped (e.g. 3.2 to 3.4)
Some of the figures would be out of date. The reason is they
had pathnames that included the release of the kernel.
For previous YP releases I was adding logic to the Makefile
to be sure to catch the right files dependent on the branch
from which the documents were being built. This scheme is
not scalable so I decided to make the figures generic by
adding a note within the figures explaining the place-holder
"<x.x>" as part of a pathname. Thus, three new figures were
added to the folders directories of the dev-manual and the
mega-manual. Correspondingly, the 'denzil' version of the
figures were deleted.
I modified the Makefile so that if the BRANCH is not edison
or denzil then the generic figure set is used. I have to retain
the logic for both edison and denzil to cover the case where
a user clones or sets up an edison or denzil repo and then
builds out the manuals. Basically, it had to be backwards
compatible for releases prior to danny.
(From yocto-docs rev: 8283eed4b0b9ec164b87db99c35231f8731ac443)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits to the part of the example that sets up for the
first core-image-minimal build. Put in the variable to use
for the build environment setup script, updated some changed
output from some of the commands, etc.
(From yocto-docs rev: 0b4b2ddf9a78a9d6d218ed9a6f0acd3e876d9581)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Danny, the "kernel-example-repo-<release>.png" file changed to
"kernel-example-repo-danny.png". To correctly make the dev-manual
and the mega-manual some things needed to change:
1. New figure created and added to both the dev-manual and the
mega-manuals figures directory.
2. The "kernel-example-repo-denzil.png" files from the dev-manual
and mega-manual figures directory was removed.
3. The Makefile was adjusted so a new BRANCH=danny area now exists
to set TARFILES for both dev-manual and mega-manual.
(From yocto-docs rev: 8b2ff6b657a1486559799e219baaec9fde2e5c6c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a note at the beginning of this appendix that references
the yocto-kernel script as a way to quickly manage kernel patches
and configuration.
(From yocto-docs rev: 35cd7f6a9722120e47ae8b422dd86593497ebf1c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This appendix is antiquated and needed removed. The BSP
development example is now in the BSP guide where it talks
about running the yocto-bsp script.
(From yocto-docs rev: 892ff450d79a7564a72f11eb7510d349ca71d47a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removing the Appendix A (BSP) example had some rippling affects
throughout the doc set. There were several links into the appendix.
All these links had to either be modified (if possible) or simply
removed since the appendix will be removed.
(From yocto-docs rev: fff35abd87e945de1806eef63a56a956d104bf92)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section now points into the BSP Guide where it talks
about using the yocto-bsp script to create a BSP. The prior
method was by hand and described in an appendix (A) of the
YP Development Manual.
FYI - this results in the removal of Appendex A in a future
commit.
(From yocto-docs rev: 5e1c44b1768b79dd1447ea47461b84248bd2111f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The examples were out of date. They did not show the
meta-yocto-bsp layer, which is there now by default.
(From yocto-docs rev: ea2e2e8a259bc3e629fb8087229872b9818a696a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was out of date. I copied in the most recent version
of the bblayers.conf file, which sets LCONF_VERSION to "6" now.
Also, added the meta-yocto-bsp layer to the example.
Additionally, I inserted a Note explaining the consequences of
removing the meta-yocto layer. The note references [YOCTO_#3176]
for more information.
(From yocto-docs rev: 532b72c5c18b2a9a61619164bae6216c91c2ecc9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current setting was changed from "1" to "6".
(From yocto-docs rev: 7f5be4b0b2d1e17add774c7ba3b8803ad770a8fc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the meta-yocto-bsp layer to the example listing in the
"Enabling Your Layer" section.
(From yocto-docs rev: 95fb13a1049ccaffb3531c93a28a3c480ea1a243)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Explain that we test with a set of reference hardware rather than only
supporting hardware that we have (avoiding any implication that the
build system can't support other devices). These are in the
faq entry in the poky-ref-manual for the question of how we can
claim Poky / OpenEmbedded-Core is stable.
* Adjust the language so that it is OE-Core friendly, with a link to
the Development Manual for the definition of OE-Core.
(From yocto-docs rev: 5ff1604dd383b26e918c319fcbe46dd1589cebc5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I edited the patch from Paul a bit here to conform to
the style of writing plus to make things clearer.
(From yocto-docs rev: 87abf857cfcd8a0d78a48322fbe9ac5395b6ad30)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the listing of the final SRCREV statements for the
BSP example.
(From yocto-docs rev: 0d0d5994c2653dda1171eaad226bbe1764a04440)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes are partial for converting the example for BSP
creation from Crown Bay to Fish River Island 2.
(From yocto-docs rev: c7fc78a8453ad363138764aa30e377b56ce49f2b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the reference to the Downloads page.
Also fixed the local branch in the meta-intel example so that
it uses the same name as the local branch created for cloning
poky.
(From yocto-docs rev: edac781b37bce0d0bca6a741186cfa53a512b73e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new branch is named distro plus poky revision
(e.g. danny-8.0). I had just the distro in there.
(From yocto-docs rev: 9490849f7f6dc815d1b676b15b3f38f671a49be8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The term "Source Directory" should be capitalized.
(From yocto-docs rev: 143213545358dd5b6c28c71202bea2e40dbb2522)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the Quilt and Git flow methods there is a bullet that talks
about incrementing the PR variable. I changed the wording to
be in the context of recipes rather than packages.
(From yocto-docs rev: 64f6230251c023e469a346c0425834b950ed5c9b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Paul Eggleton