In build detail page, the response action of clicked the 'run image'
or 'deploy' button will accroding to below as ui design:
1)if there has one file in building result, it will responsed the
'run image'(now, we only support the qemu) or 'deploy' directly
2)if there has more than one file, it will popup a dialog with listed
created files type, they are has same action attributes 'deploy'
or 'runnable'.
Note: because the qemu image (runnable file) can't be deployed and
we can't generated a image that has the two attributes now, can be run
or can be deployed, so the code will not deal with this case.
[YOCTO #2155]
(Bitbake rev: 0d24b1e85a11b68c8464cf15b49d3fc78f216818)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I'm not sure why we don't currently allow multiple entries in rdeptask when
we do in deptask. This makes the handling match between the two since
its trivial to fix.
(Bitbake rev: 19c84fe8854639768c874cc1449963a9867ad397)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
People are using regexps in the url type field so we need to preserve
this bitbake behaviour. To address the issues with https:// urls mapping
badly to file:// urls we anchor the regexp if its not already anchored.
There should be no expressions in the wild which would break with this
change.
(Bitbake rev: ce0579dc256251e523c6330641f98b9f5a0e5761)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, recrdepends is extremely greedy. For example:
do_foo[rdepends] = "somedep:sometask"
addtask foo
which adds foo with *no* dependencies, will suddenly start appearing
as a dependency in every task which uses recrdepends. So far this has
been mildy annoying but we now have use cases where this makes no sense
at all.
This reworks the recrdepends code to avoid this problem. To do this we
can no longer collapse things into lists just based on file ID. The problem
is this code is extremely performance sensitive. The "preparing runqueue"
phase spends a lot of time in these recursive dependency calculations so any
change here could negatively impact the user experience.
As such, this code has been carefully tested on convoluted dependency trees
with operations like "time bitbake world -g". The net result of this change
and the preceeding changes combined is a net speed up of these operations in
all cases measured.
Tests were made comparing "bitbake world -g" task-depends.dot before and after
this patch. There *are* differences for example -nativesdk do_build dependencies
on -native recipes are no longer present. All removed dependencies appear to
be sensible improvements to the system. The "rdepends" cross contamination
issue above is also fixed.
(Bitbake rev: 82d73423c57569b984ee0ae3d93e3c3bd5dc5216)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This gives some small performance gains and sets the scene for other
improvements by removing the need for duplicate detection code.
(Bitbake rev: 6fd723479e8d49227fd58040b3485c1d5afc4bc5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is like gettask_id but doesn't require translation of fnid -> fn
first which the function then translates back. This gives a sizeable
performance improvement since a significant number of lookups are avoided.
(Bitbake rev: 3190cb83e2af195a464f669c5aa8aedbf795160e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed unnecessary button from Recipes screen and
replaced the button that diplayed packages size and total image size
from Packages screen with a label.
(Bitbake rev: e6ff1d4bab43fdcd8af1230f1d54615f53c1978e)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I am sorry that use os.tmpname which casue a security warning.
Follow Darren's suggestion to use tempfile.NamedTemporaryFile instead.
(Bitbake rev: fe514a130579302312f68821536d108c8ceb4363)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If '*' does end up in mirror urls accidently, some strange things
can break since supports_checksum() looks for this, ud.localpath can
then get ignored and this can lead to empty directories being downloaded
"successfully". '*' is a special case for file urls only at this point
so remove any entries that accidentlly make it in through url mapping.
(Bitbake rev: 1369bec2404d942acc3618a8d005ec6868dcfd41)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
_ and LANG no longer need to be preserved from the external environment.
The value of _ changes between non-pseudo-wrapped and pseudo-wrapped
invocations (e.g. between "bitbake -p" and "bitbake target") and this
will currently trigger a full reparse in the absence of a whitelist
entry in BB_HASHCONFIG_WHITELIST, which is not ideal.
LANG used to be preserved in order to ensure the C locale was being
used for tools invoked by bitbake, however we now set LC_ALL in
bitbake.conf to take care of this.
Second part of the fix for [YOCTO #2600].
Acked-by: Jason Wessel <jason.wessel@windriver.com>
(Bitbake rev: 1c531dff2fb055ecab2d462027eecec3fabc2a44)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When writing mirror specifications, the current regexp syntax can be awkward
and hard to get it to do what you want. For example, extracting the 'basename'
of a repository:
PREMIRRORS = "git://.*/([^/]+/)*([^/]*) git://somewhere.org/somedir/\\2;protocol=file"
can now become:
PREMIRRORS = "git://.*/.* git://somewhere.org/somedir/BASENAME;protocol=file"
which is much clearer. A MIRRORNAME substitution is also added which contains
an encoded form of both host and path. One of the problems with the existing
regexp syntax is you couldn't access HOST information from PATH and vice-versa
which is an issue this patch also addresses.
Tests for the new syntax are also added.
(Bitbake rev: c6b1acbad7b3d2698530eb8b5249adb4ab95da21)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we build the mirror urls, its possible an error will occur. If it
does, it should just mean we don't attempt this mirror url. The current
code actually aborts *all* the mirrors, not just the failed url.
This patch catches and logs the exception allowing things to continue.
(Bitbake rev: c35cbd1a1403865cf4f59ec88e1881669868103c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are two problems with the _logged_communicate that are both
caused as a result of buffering I/O issues:
1) log truncation when python fails
2) While a bitbake task is running it is impossible to see what is
going on if it is only writing a small incremental log that is
smaller than the buffer, or you get only a partial log, up until
the task exists. It is worse in the case that stderr and stdout
are separate file handles, because previous code blocks on the read
of stdout and then stderr, serially.
The right approach is simply to use select() to determine if there is
data available and also flush the log before exiting.
This is based on a patch from Jason Wessel <jason.wessel@windriver.com>
with some changes to flush upon exit, abstract the non blocking file
descriptor setup and drop the buffer size parameter.
(Bitbake rev: 361fb71e907aa84c28ecec79fefc6ca39c39172f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently its not possible to add arbitrary RDEPENDS to a specific task.
This can be useful and this patch adds functionality equivalent to the
'depends' task flag.
(Bitbake rev: db65080a6199baecc5c422294a4c4a9fd12dc29e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If -l is specified and the source and destination are not on a common
filesystem an error occurs. The -l option is however the default for
git for local paths which the fetcher already now ensures in the
file:// case.
We can therefore safely drop the -l option.
(Bitbake rev: 3aeb268b2aaab4bb8b1cfff1450e0b76aa8ce855)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Log a note when applying a taint to a task signature (e.g. when using
the -f or -C command line options) so that the user knows this has been
done.
(Bitbake rev: 0fd960fdea83874eedb541cbc2920257e0f3fb81)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
What is specified is a command (or "cmd" as in the help text for -f)
rather than a task - i.e. you specify compile, not do_compile, so change
the sentence to reflect that and reorder it slightly so it makes sense.
(Bitbake rev: 9ab269410ef5cd4753fe11ec74759f421685bb7b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A file:// url should use "clone -l" to greatly speed
up the clone in the case of a kernel when it is local.
(Bitbake rev: 2bab2cc3ffe67ee2a308074a6e4c2c7be5636d2f)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Yocto 2149]
Use the new progressbar in Hob, so that we can reduce the maintenance
burden of the multiple GUIs.
(Bitbake rev: 6c0da26adbdcaa0c56737bacddb61678a9095e32)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For mirror mapping, we never use regexps for the type component of
the url. Doing so causes various slightly bizarre behaviour such as
https:// urls being translated to files:// urls which we have no handler
for. This patch forces the type matches to be direct, not regexp based
and gives the expected bahvriour.
(From Poky rev: 695d8aca0999d2d61970b990e83c3132ba6f12cb)
(Bitbake rev: 604df1b25cf114e083f52917df2df64e01279c25)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using ud.localpath as a basename when it points at a directory causes
problems. The supports_checksum() method gives a good indication of whether
ud.localpath can be used in the way we need.
(From Poky rev: 933ec8a44634e33f92f6f76de3a34094c3d63aa6)
(Bitbake rev: dcd79ae20ab2c72c3312b2251c2b6dc4cabe988e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We only consider mirror tarballs when the source and target urls are of
differing types. We also should clear all url paramters when handling
mirror tarballs.
(From Poky rev: da140b8b0b3dda5429f9eee68829ef5247cdfe12)
(Bitbake rev: 7619dcad29a6c2405b15a8fbadfa11e81b399ae1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This means that parameters in the source expression are used as part of the
match. Parameters in the destination are used explicitly in the final
url.
(From Poky rev: c465cb0c5c927dd41d96ad6d6fa1566349574bb7)
(Bitbake rev: 3c468ac3ed6d045561afce19b85ae9dd18d87cea)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we only consider one pass through the mirror list. This doesn't
catch cases where for example you might want to setup a mirror of a mirror
and allow multiple redirection. There is no reason we can't support this
and the patch loops through the list recursively now.
As a safeguard, it will stop if any duplicate urls are found, hence
avoiding circular dependency looping.
(From Poky rev: 0ec0a4412865e54495c07beea1ced8355da58073)
(Bitbake rev: e585730e931e6abdb15ba8a3849c5fd22845b891)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With support for things like git:// -> git:// urls, we need to be
more explicity about the mirrortarball check since we need to fall
through to the following code in other cases.
(From Poky rev: 28e858cd6f7509468ef3e527a86820b9e06044db)
(Bitbake rev: a2459f5ca2f517964287f9a7c666a6856434e631)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are no functionality changes in this change
(From Poky rev: d222ebb7c75d74fde4fd04ea6feb27e10a862bae)
(Bitbake rev: db62e109cc36380ff8b8918628c9dea14ac9afbc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This assists with build reproducuility. It also avoids errors if cwd
happens not to exist when we call into the fetcher. That situation
would be unusual but I hit it with the unit tests.
(From Poky rev: 86517af9e066c2da1d580fa66b7c7f0340f3403e)
(Bitbake rev: b886c6c15a58643e06ca5ad7a3ff1f7766e4f48c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This new command line option forces the specified task and all dependent
tasks up to the default task to re-run. This means that the following
single step:
bitbake -C compile somerecipe
is equivalent to the following two steps (with the recent change to -f):
bitbake -c compile -f somerecipe
bitbake somerecipe
Note that to work this option needs full hashing enabled (i.e.
BB_SIGNATURE_HANDLER must be set to a signature handler that inherits
from BasicHash). If this is not the case, -C effectively does nothing.
Based on a previous implementation of this option by Jason Wessel
<jason.wessel@windriver.com>.
Implements [YOCTO #2615].
(Bitbake rev: 2530e0faada5775897cfd1b93aba6925826dca73)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If -f is specified, force dependent tasks to be re-run next time. This
works by changing the force behaviour so that instead of deleting the
task's stamp, we write a "taint" file into the stamps directory, which
will alter the taskhash randomly and thus trigger the task to re-run
next time we evaluate whether or not that should be done as well as
influencing the taskhashes of any dependent tasks so that they are
similarly re-triggered. As a bonus because we write this file as
<stamp file name>.taskname.taint, the existing code which deletes the
stamp files in OE's do_clean will already handle removing it.
This means you can now do the following:
bitbake somepackage
[ change the source code in the package's WORKDIR ]
bitbake -c compile -f somepackage
bitbake somepackage
and the result will be that all of the tasks that depend on do_compile
(do_install, do_package, etc.) will be re-run in the last step.
Note that to operate in the manner described above you need full hashing
enabled (i.e. BB_SIGNATURE_HANDLER must be set to a signature handler
that inherits from BasicHash). If this is not the case, -f will just
delete the stamp for the specified task as it did before.
This fix is required for [YOCTO #2615] and [YOCTO #2256].
(Bitbake rev: f7b55a94226f9acd985f87946e26d01bd86a35bb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current error message is confusing, this improves it to explain the problem
and the possible ways to resolve it.
[YOCTO #2530]
(Bitbake rev: d316f28ed725ff40daa8771c1aa224ac46d5b224)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The commit 420eb112a4f (fetch2: quote/unquote url paths) caused a regression
since local file urls containing quoted characters are no longer being handled
correctly. This fixes things so the url is dequoted correctly, fixing various
fetcher failures with recipes like "gtk+".
[YOCTO #2558]
(Bitbake rev: 95c0595d66b3f8a5f0716662ba2a878600f312ea)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are actually two problems to fix
1) The exception for bb.process.ExecutionError must be processed first
because it is a derived from the bb.process.CmdError class and
we never reach the ExecutionError otherwise.
2) The stderr needs to be printed as well as stdout to determine
the root cause of a fetch failure.
The example I have is that I got a log that looked like:
--
ERROR: Function failed: Network access disabled through
BB_NO_NETWORK but access requested with command
/usr/bin/env wget -t 5 -nv --passive-ftp --no-check-certificate -P
/localds 'http://downloads.yoctoproject.org/[...CLIPPED...] url None)
--
That really didn't tell me much, but with this patch I get error above
plus the following:
--
STDERR: /net/[...CLIPPED...]kernel-tools.git: Read-only file system
--
(Bitbake rev: af2133a04e1f4b22b181adf9c71f89c439bb88cf)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The combo view is not sensitive, after select recipes come back.
so fixed this issue.
[YOCTO #2500]
(Bitbake rev: debcea9c063f7bddcba1d4ed47edbe173ef1d9cf)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due in mistake deletion in previous patches, if building failed, will report
the error of no 'set_page', so add that function.
(Bitbake rev: b046f4316ee7f2afaa0bb723e4216714d9cb87a0)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tweak some strings in accord with the script name 'image writer', and
remove extra noun 'button'.
(Bitbake rev: d2d65335e8fc2417ebd3910f645cc00a4abfbeaa)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to Darren's suggestion, subprocess.call() will wait until the
subprocess complete. So simplify the code, use subprocess.call() to wait
command complete.
(Bitbake rev: 3dea9d5a5af82d99d337238981807a4cb1bd5b93)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add comments for DeployImageDialog 'standalone' part of codes to make it
easy to read.
And tweak some strings.
(Bitbake rev: b0e604d3d6dbfcaeac0a2e0e4399aeb4327f8cbc)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Yocto 2388]
Create a deploy image tool using the existing dialog including
DeployImageDialog and ImageSelectionDialog.
This tool writes bootable images to USB devices, and it can be run
directly without hob.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Part of [Yocto 2388]
Update class DeployImageDialog to get ready for a standalone deploy
image tool. The standalone tool can be run directly without hob, and
add a button to select image file. So adjust the layout of
DeployImageDialog.
(Bitbake rev: 399cfbaf36ccd4b934e25f915e64b87f32a3eb82)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Liming An
Richard Purdie
Cristian Iorga
Kang Kai
Paul Eggleton
Jason Wessel