The previous monitor is based on the disk, and one disk only can have
one action, this limits its function, for example we set this in the
current local.conf:
BB_DISKMON_DIRS = "\
STOPTASKS,${TMPDIR},1G,100K \
STOPTASKS,${DL_DIR},1G,100K \
STOPTASKS,${SSTATE_DIR},1G,100K \
ABORT,${TMPDIR},100M,1K \
ABORT,${DL_DIR},100M,1K \
ABORT,${SSTATE_DIR},100GM,1K"
Before:
* If TMPDIR, DL_DIR and SSTATE_DIR are on the same disk partition,
only the last line "ABORT,${SSTATE_DIR},100GM,1K" works
* If TMPDIR, DL_DIR and SSTATE_DIR are on the different disk partitions,
only the last three lines (ABORT) work.
These are not what we expect, now:
* We monitor the disk based on the path and action, so all the six lines
will work no matter whether they are on the same disk partition or
not.
* The out put format will be:
WARNING: The free space of /path/to/directory (device) is running low (XXGB left)
[YOCTO #3995]
(Bitbake rev: e22a576672ee4a40b44f7a826a78a77fc07e9177)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
" tabs and passing the information needed to the function created
in the builder.
(Bitbake rev: 60c3b561d66f9a43e696c402899141287ddb496e)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
and passing the information needed to the function created in the builder.
(Bitbake rev: 840bbdbc973e72d4305c21bcc26c008a6dc39456)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
in the information dialogs.
(Bitbake rev: 0301e7622af83c105ba60d7d1749294de06f6a59)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
in order to display all the information gathered in the
backend, new columns needed to be added in the hoblistmodel.
(Bitbake rev: 0942f05a1196513c6d163f28cf297728aed6ee22)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
added information so that it would display correctly in the information dialogs.
(Bitbake rev: bf86cc183c250acd0e52755ae6050a2f8d85ccf5)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this covers functionality for : recipe selection page
package selection page
information dialogs
(Bitbake rev: 82cb844c92fcc71cefe7d7ddc110523c62185e9e)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
added information so that it would display
correctly in the information dialogs.
(Bitbake rev: 7580716b905366aea70c9eed38dc703cecf24219)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
replaced in the builder.py the function that displayed the tooltips
with two functions that display property windows for recipes and packages
pages.
(Bitbake rev: bec3c1dc91118705149d00e5ec2bea08c8db75ed)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-extended cooker.py so that the extra information in cache_extra.py could
be used
(Bitbake rev: e6c2fa2f6669a4adf890a2ee794b100617223b7b)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- in order to have the information needed in the property
windows, cache_extra.py was extended with variables.
(Bitbake rev: bc09090f44f9b3a1b123f5453586295b9623218b)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
harfbuzz is using the 'Modern Variants' of MIT License:
https://fedoraproject.org/wiki/Licensing:MIT?rd=Licensing/MIT#Modern_Variants
We can update the LICENSE as 'MIT & ICU'.
Fixes this warning:
WARNING: harfbuzz: No generic license file exists for: Old-MIT in any provider
WARNING: harfbuzz: No generic license file exists for: UCDN in any provider
WARNING: harfbuzz: No generic license file exists for: HarfBuzz-old in any provider
(From OE-Core rev: 2ecb3b99373e17d93f50142f2da3f786c83c7eb2)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to the use of ${@...} the code will try and expand this when
performing the initial parsing. If the sysroot doesn't exist with
an existing kernel, this will fail at parsing time.
Sinec we're already in python, just remove the ${@....} wrapping
and then we execute at do_package time which is what we want.
(From OE-Core rev: 053ca014e7eb8c9dd05cef42fe23f463f3eb15dd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake handles immediate expansions of LAYERDIR for us automatically.
(From meta-yocto rev: ee59f1ec94ba8474876603dad1ab32d131227f49)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Have perf grab and use the kernel version it's built from for PKGV,
rather than the default perf recipe version, so the final packages get
the kernel version instead of the default 1.0, which represents a
backwards value from the previous recipe.
(From OE-Core rev: deb99cefe8be7fa63972edadf69f92d361b9a7c5)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake handles immediate expansions of LAYERDIR for us automatically.
(From OE-Core rev: 643ac87145eba5dc105377041bc3deb163b62926)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Running 'python setup.py build' would fail due to the python Makefile having
CC= i586-angstrom-linux-gcc -m32 -march=core2 -msse3 -mtune=generic -mfpmath=sse --sysroot=/home/koen/v2012.12/build/tmp-angstrom_v2012_12-eglibc/sysroots/fri2
CXX= i586-angstrom-linux-g++ -m32 -march=core2 -msse3 -mtune=generic -mfpmath=sse --sysroot=/home/koen/v2012.12/build/tmp-angstrom_v2012_12-eglibc/sysroots/fri2
'--with-libtool-sysroot=/home/koen/v2012.12/build/tmp-angstrom_v2012_12-eglibc/sysroots/fri2'
And more
Multiple users have reported this problem:
http://hipstercircuits.com/?p=499http://www.gigamegablog.com/2012/09/09/beaglebone-coding-101-spi-output/
(From OE-Core rev: 5704dfa690a625abcface432cf5f9c9bc3ee8abd)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename and modifying existing recipes to use 2013b
versions of time zone.
(From OE-Core rev: ba748709ff01f9a0ea9b1671d509c971a271ed2f)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current code has a race since it greps for *any* qemu process
running, even if it isn't the one we started. This leads to some sanity
tests potentially failing on machines where multiple sets of sanity tests
are running.
To resovle this and some other ugly code issues, add a python script
to accurately walk the process tree and find the qemu process. We can
then replace all the shell functions attempting this which happen to
work in many cases but not all.
Also clean up some of the error handling so its more legible.
(From OE-Core rev: b9e052ed6b604f0049bcfa968a57f15d6e3d6395)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous syslinux menu code did not support using both a serial
and vga console, but this has worked for years in syslinux so there is
no reason not to take advantage of it. The previous menu looked like:
-------------------------------------------------------
Linux Boot Menu
The following targets are available on this image:
boot: None
install: None
-------------------------------------------------------
This commit makes it look something more like a traditional grub menu
on both the serial console and vga console as well as providing the
option to continue on using either the serial or vga console with the
correct kernel arguments.
You can see the screen shots attached to the bugzilla.
https://bugzilla.yoctoproject.org/show_bug.cgi?id=3944
[ YOCTO #3944 ]
(From OE-Core rev: 7032d559c04bae09e6b7c39ddeb1bf35acc0584c)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Detection of libnfnetlink is automatic in configure which means
that when you have meta-networking in your cosmos, it would create
a race condition where if libnfnetlink is already staged then it
will be enabled otherwise disabled. The issue happens quite often
with sstate and high parallelism. Since the dependency libnfnetlink
is not part of OE-Core, this patch turns it into a PACKAGECONFIG
which is diabled by default and iptables is patched to provide
the knob.
If you want to enable libnfnetlink support then it can be done
in a bbappend where you are sure that you are also including
meta-networking in your distro.
While at it also turned ipv6 support into packageconfig
(From OE-Core rev: 0332551d90c866c5874529e81819b81b534e14be)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
neard ver 0.10:
Added initial WiFi handover support.
Added Service Name Lookup support to nfctool.
Added NDEF building unit tests.
Added State support to Bluetooth handover agent.
Added neard and neard.conf man pages.
Added a copy of the NFC kernel header.
Fixed handover validation tests failures.
Fixed Tag and Device PropertyChanged signal.
(From OE-Core rev: dff13ee38a4f6aa51722149b860a2af354d6f9e8)
Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The script was creating a FAT fs with EFI files in it, but wasn't setting the GPT GUID.
Using 'gummiboot install' natively failed because of the missing GPT GUID, so fix that. While we're there also set the name to "EFI System Partition".
(From OE-Core rev: 203ca80ee27948e2c68aab8ea48e51ff1c1157d5)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Makefile fix (patch) was merged upsream
Out of tree builds were also fixed
(From OE-Core rev: 8d8fb11d68fbeebf1c070277e137d3dc1dee6ad6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, various standard library operations like os.walk(),
os.path.isdir() and os.path.islink() each call stat or lstat which
involves a syscall into the kernel. There is no caching since they could
conceivably have changed on disk. The result is that for something like
the do_package task of the kernel we're spending over two minutes making
868,000 individual stat calls for 23,000 files. This is suboptimal.
This patch adds lib/oe/cachedpath.py which are a set of replacement
functions for these operations which use cached stat data rather than
hitting the kernel each time. It gives a nice performance improvement
halving the build time of the kernel do_package.
(From OE-Core rev: 556dee0c4d6d8a87c0cddbd2f60fe5917d009f18)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change allows ${B} != ${S} builds to work since otherwise
gnu-configise is executed in the wrong places and various source
paths aren't correct.
(From OE-Core rev: e0705e4801a9855a4289d18e653c35190021206e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When creating images containing many partitions, rootfs.$type
may not be available.
(From OE-Core rev: cf8e9d8942fdddaac21fca46137120da959c814c)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
liburcu-0.7.6 supports MIPS. So, we can remove the COMPATIBLE_HOST
check intended for MIPS.
(From OE-Core rev: 2958de61fdf60b484b718b7def3d34ad3853725a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
liburcu-0.7.6 supports MIPS. So, we can remove the COMPATIBLE_HOST
check intended for MIPS.
(From OE-Core rev: e1549656253ff3f4923c3d27b72576f955c6ed2d)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
liburcu-0.7.6 supports MIPS. So, we can remove the COMPATIBLE_HOST
check intended for MIPS.
(From OE-Core rev: 36f094e766ba5a1c3811e7aa28d75790e09cb9e4)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
liburcu-0.7.6 supports MIPS. So, we can remove the COMPATIBLE_HOST
check intended for MIPS.
(From OE-Core rev: 3bfca9654c257217e2d7821c6d8fc0abe1e672ff)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
liburcu-0.7.6 supports MIPS. So, we can remove the COMPATIBLE_HOST
check intended for MIPS.
(From OE-Core rev: e1da97afbf7bb1609ece15a529befab213fa4466)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add patch to fix out of tree build failures.
(From OE-Core rev: 43da2e1fc1509d039e4ccfa31b7359c65407fde0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refresh the patches and fix out of tree build issue.
(From OE-Core rev: f0ccc06a051d5db2fee5aa52b066563d403f6e25)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix out of tree builds by remvoing cwd assumption.
(From OE-Core rev: 4a805f74b8a2ac5db27ed8f3c3232d2391a18842)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix out of tree builds by ensuring bootstrap is executed in ${S}.
(From OE-Core rev: 970be6b43acd16dac1400ce322dcd2cb6272fd63)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix low hanging out of tree build issue but others remain.
(From OE-Core rev: 414f748ee499f629bf50eb3fa70e20e2105b3c49)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix out of tree builds by fixing cwd assumptions and using correct
full paths where needed, or just simply the correct paths.
(From OE-Core rev: 0525a1556ab3d25d9e6bda2fc3c8e40123825109)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade to new upstream revision which includes out of tree build
fixes.
(From OE-Core rev: be335eab958546c8ae39b879767dd30f1e95a701)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix out of tree builds by fixing cwd assumptions.
(From OE-Core rev: 21b504453cbd5ef94812fddf224622c7ce167981)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix out of tree build by fixing cwd assumptions.
(From OE-Core rev: 1f7583d669f1d13cdc2ed0f7c468c65879489cca)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix out of tree builds by using full path to files in ${S} and remove
cwd assumptions.
(From OE-Core rev: 97dc39e42e95dcadc7bed1aee32db3560e21efe5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix out of tree builds by placing built objects in the correct
location.
(From OE-Core rev: 89514049f424eddaa9e46cf4fd8c25d05a9b1c15)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix out of tree builds by using full paths to source and built
objects as appropriate.
(From OE-Core rev: fb9885f0f89eef30275683510569bf0ae8463226)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix out of tree builds for the native case by using the correct
path to the built object.
(From OE-Core rev: ea39d2ba55205d47356ee53779ce991eade1fb5f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patch the makefiles to allow out of tree builds to work.
(From OE-Core rev: 05ba73cb721481db319bc9f528fe7085d5684303)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix out of tree builds by removing assumptions about cwd and using
full paths to files in ${S}.
(From OE-Core rev: 6c2d3ced1af4e7ebc63e9a9ac9353d565d1568bf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow out of tree builds to work by removing assumptions about cwd.
(From OE-Core rev: f265de26fcde98cdc7a8e4bfec777888a216ff8c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix out of tree builds by referring to the build object in ${B}.
(From OE-Core rev: a49689a50a44657d8d13609b85d0f8dbaf6cfb86)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang
Andrei Dinu
Maxin B. John
Richard Purdie
Christopher Larson
Tom Zanussi
Koen Kooi
Joe Slater
Jason Wessel
Khem Raj
Olivier Guiter
Andreas Oberritter