commits: 7697c24..2e05e11
upstream: git://git.kernel.org/pub/scm/linux/kernel/git/compudj/linux-2.6-lttng.git
Update to lttng-0.242 for 2.6.37. Built and boot tested on all
architectures.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Uprev pseudo to the latest version. This corrects a linking problem on
some newer host systems.
In addition, we add more detail to the local.conf.sample file to explain
the NO32LIBS and why someone would set it to 0.
Also fix a minor bug in pseudo that prevented it from building for the
target.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Support has been added for basic Beagleboard xM functionality,
including networking, to the linux-yocto kernel repository.
Tested on the Beagleboard xM.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
A new default SUMMARY and DESCRIPTION was defined for any package that
previously did not contain one. This value is based on the original
SUMMARY_${PN} value.
The new default SUMMARY and DESCRIPTION is used as a basis for all of
the automatic summary and descriptions for the various package splits,
include ${PN}, ${PN}-dbg, ${PN}-dev, ${PN}-doc, and locales.
A recipe may also override any of the automatic summaries by simply
specifying the value.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
The definition of NM was missing, causing certain configure calls to revert
to using the host system's version of NM. This can cause problems on some
MIPS based targets, but is theoretically wrong everywhere.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Updating for the sugarbay and beagleboard BSPs. To make the sugbay
inhert common-pc-64 generic config/changes/fixes it has been
branched in the kernel as yocto/standard/common-pc-64/sugarbar, as
a result, we'll bump the common-pc-64 to be yocto/standard/common-pc-64/base.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Fixes [BUGID #692]
Previously the information dumped by the kernel configuration audit
scripts was only placed in log files. This isn't as useful as it
could be, since they are rarely checked. This change takes the
output from kconf_check and explicitly displays it to the user.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Fixes [BUGID #685]
Although not used if the in kernel uImage is booted, it is
a good idea to set the UBOOT_ENTRYPOINT just as the other
uImage based boards do.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Add manual check date for recipes whose upstream vesion could not be
found automatically.
Also update glib-2.0 tracking data.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
The longlinks patch is upstream and and be removed now
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
pixman's stable releases have even minor version numbers, e.g., 0.18.x, 0.20.x.
Odd minor version numbers mean development snapshots that may contain bugs and
experimental features.
The next stable release should be 0.22.0.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
0.90.2 depends on unstable gtk+-2.90.x that is not in poky, so pick up one
version prior to it. Also rebase disable_deprecated.patch to keep the API
compatibility with gtk+ and install example binary for poky-image-clutter.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
These are distro tracking field additions for recipes used for
creating documentation: sgml-common, docbook-sgml-dtd,
docbook-dsssl-stylesheet, sgmlspl, opensp, openjade, docbook-utils
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
This brings things back in sync with OpenEmbedded and will
help with recipe porting.
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This works with rpm 5.4.0
Signed-off-by: Qing He <qing.he@intel.com>
Update the CMAKE configuration file to find the proper DB library as used
by RPM5 within Poky.
Disable checking for Fedora and Debian, as this might lead to incorrect
results.
Merge the dso_linking_change_build_fix with the other cmake changes.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Also apply four patches from Koen to fix four issus:
- The tv-out gets added last and the driver tries to reconfigure dvi to TV resolutions, which fails
- The new DSS mode breaks XV, so force plain mode
- Picture is garbled after switching resolutions
- Virtual size too big
CC: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Yu Ke <ke.yu@intel.com>
This is an intial commit for the license reporting system. A few notes:
The LICENSE fields needs to be standardized throughout poky. As it
stands, we throw a warning if the license file is not found (either
because it does not exist or because LICENSE_FILE_CHKSUM is munged)
in the generic license directory. This should eventually become an
error.
I've seen a few places where Apache-v2.0 is written differently and
I'm sure this will throw the above warning. This does not put the
license data on the rootfs. Also, I provide both the actual license
text and a link to the best guess of the generic_license. That guessing
is not very robust and I'm loath to get into a bunch of pattern matching
rather than standardize LICENSE.
This adds one new param to poky.conf and one new to license.bbclass:
LICENSE_DIR: the base directory we copy all the license results to (set
in license.bbclass)
COMMON_LICENSE_DIR: this is the directory that holds all the common
generic license files. currently meta/files/common-licenses (set in
poky.conf)
TODO:
- We should verify the common-licenses. I stripped these from my Ubuntu
10.10 system.
- We should allow the capability of licenses on the rootfs, although the
resulting image created would be a lot larger.
- More common-licenses. I don't include bzip, zlib, ICS.... I should,
but that means tracking down a lot of licenses.
- General cleanup of licensing and standardization of names. We should
standardize on a naming convention. What's in licenses.conf should
match up with what is in the recipes which should match with what is
in common-licenses. Outside the scope of this though. See:
http://bugzilla.pokylinux.org/show_bug.cgi?id=650
Updating SRCREVs to reflect:
perf: hard-code NO_LIBPERL/NO_LIBPYTHON
ExtUtils::Embed ccopts is getting the host's -I/usr/local/include and
using it to compile perf, which results in a compilation error that
started appearing just recently.
This turns the code that makes use of ExtUtils::Embed off and simply
hard-codes NO_LIBPERL.
It does the same for LIBPYTHON while we're at it, since it probably
suffers from a similar underlying problem and just by chance hasn't
broken anything yet.
This will be re-enabled after I familiarize myself with the perf
recipe and am able to create a proper fix.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
This commit changes the sysroots path to be machine specific.
Changes includes:
1) STAGING_DIR_TARGET and STRAGING_DIR_HOST points to machine specific
paths.
2) task stamp files. Adding ${MACHINE} info into stamp files for
do_populate_sysroots and do_package tasks. Add a BB_STAMPTASK_BLACKLIST
to keep native, nativesdk, crosssdk, and cross-canadian stamp unchanged.
3) siteconfig path. Separate the site config path for different machines
to avoid one machine adopting the cache file of another machine.
4) sstate. Add machine name to sstate manifest file.
Change relocation code for sstate paths since sysroot is machine.
Keep native, nativesdk, crosssdk, and cross-canadian unchanged.
5) toolchain scripts. Change the environment path to point to machine
specific sysroots in toolchain scripts bbclass.
6) Relocate la files when populating to a different machine of the same
architecture.
7) Exclude STAGING_DIR_TARGET and STAGING_DIR_HOST parameter from sstate
siginfo since they contain ${MACHINE} information.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
The message cache code in pseudo seems to be causing problems. So we have
finally decided to revert that optimization.
(The revert is in the upstream pseudo.)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
By default the linux-yocto recipes operate on the current branch
and use it as a trigger to locate the description of a board. This
model works well when using the git repo outside of a build system
since the commands can be simply invoked and will do something
useful. However, it does mean that you can't have two BSPs that
differ only by configuration, building out of a single branch
in the repository.
This means that you must have many branches for very similar
BSPs. This model is still preferred, but having the choice of
branching strategies is better.
With this change we can have multiple BSPs using a single branch
with the preferred description being hinted from the build
system by passing the $machine value to updateme/configme.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Updating beagleboard SRCREV to pickup:
commit 8e15b884ecf768fd9f898da5acf24938dfe81a83
Author: Koen Kooi <koen@beagleboard.org>
Date: Tue Jan 11 17:13:35 2011 +0000
omap3: beaglexm: fix EHCI power up GPIO dir
commit a5624323866c06156ca548b8515d9347fdd5188e angstrom-linux
EHCI enable power pin is inverted (active high) in comparison
to vanilla beagle which is active low. Handle this case conditionally.
Without this fix, Beagle XM 4 port EHCI will not function and no
networking will be available
[nm@ti.com: split up, added descriptive changelogs]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Koen Kooi <koen@beagleboard.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Updating the meta branch to contain the latest crownbay
configuration tweaks.
e1f85a4 wrs_meta: turn on OHCI USB config option
8be8e45 wrs_meta (crownbay): turn on AHCI SATA option
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bumping the SRCREV to pickup some missing functionality:
ebbca89 omap: Beagle: no gpio_wp pin connection on xM
671fd89 omap: Beagle: only Cx boards use pin 23 for write protect
dccdf8a omap: Beagle: revision detection
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield
Mark Hatle
Richard Purdie
Darren Hart
Nitin A Kamble
Dongxiao Xu
Koen Kooi
Dexuan Cui
Zhai Edwin
Scott Garman
Tom Rini
Qing He
Yu Ke
Beth Flanagan
Saul Wold