There is an error when build meta-toolchain-sdk on Ubuntu 10.10:
| Installing NATIVESDK packages
| Processing task-sdk-host-nativesdk...
| Processing task-cross-canadian-mips...
| error: Failed dependencies:
| libcurl.so.4 is needed by qemu-nativesdk-0.15.1-r5.i686
NOTE: package meta-toolchain-gmae-1.0-r7: task do_populate_sdk: Failed
ERROR: Task 21 (/buildarea2/lyang1/poky/meta/recipes-core/meta/meta-toolchain-gmae.bb, do_populate_sdk) failed with exit code '1'
This is because qemu would depend on curl if it happened to be
available at build time and could confuse the -native and -nativesdk
librbaries.
[YOCTO #2305]
(From OE-Core rev: 566ad643efd03db34b59a427f48ca55ce613cf89)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the sanity tests fail, we still were writing out the stamp which means
they'd get skipped the next time we run bitbake. This is clearly wrong
and we should only write out the stamp file if the sanity tests complete
successfully.
(From OE-Core rev: b99acaa8aa06dcbca46c3f7048124d6f8d643a8b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After building perl package, re-execution of compile task recursively
substitutes the path, making it an invalid path.
Fixed to prevent recursive substitution.
Similar case as [Yocto #2194]
(From OE-Core rev: 16542d982d86d42d3189d47a8180f0f71646a9ca)
Signed-off-by: Venkata Ramana Gollamudi <ramana.gollamudi@huawei.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* update-rc.d wasn't executed when the rootfs was built, because
pkg_postinst_avahi-daemon exited early. It wasn't run either
on first boot, because the exit code was 0.
(From OE-Core rev: c084759d7f69b751e1ed3ef79d686389d867f248)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The value of PARALLEL_MAKE shouldn't affect sstate checksums. In general it
doesn't as the value is injected as a task override and the sstate checksum
doesn't track these. That isn't the case for linux-yocto in particular so
adding it the list of variables to ignore is useful.
(From OE-Core rev: a0fbbd7ba979b8aaee701e0997115f89b361b920)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The generated parser had warnings regarding signess and return check
which makes Linux Kernel's perf tool from 3.4 release to fail without
those patches.
(From OE-Core rev: f3d7197252d1ede627a561fbd5b3b7fb759bf75b)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes a segfault in the properties application when connecting to a WiFi
service succeeds.
(From OE-Core rev: 767ec69e6ca633e5bde604241a598147075b1ac0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Generally distros keep perl at /usr/bin/perl
Fedora 17 also has /bin/perl
this causes automake-nativesdk build on such distros to put perl
interpreter path in the perl scripts as /bin/perl
But we set perl location for target as /usr/bin/perl
This mismatch of perl path causes failure of rootfs image creation
like this:
| error: Failed dependencies:
| /bin/perl is needed by automake-nativesdk-1.11.2-r2.x86_64
NOTE: package meta-toolchain-gmae-1.0-r7: task do_populate_sdk: Failed
The second sed command is for such a case:
eval 'case $# in 0) exec /bin/perl -S "$0";; *) exec /bin/perl -S "$0" "$@";; esac'
This line has two "/bin/perl" and we can't use a line number to tell
sed which line it is since the line numbers in different files are
defferent.
[YOCTO #2304]
(From OE-Core rev: ee7a86c06c2289f01aa5f1da958ce51523495572)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Generally distros keep perl at /usr/bin/perl
Fedora 17 also has /bin/perl
this causes autoconf-nativesdk build on such distros to put perl
interpreter path in the perl scripts as /bin/perl
But we set perl location for target as /usr/bin/perl
This mismatch of perl path causes failure of rootfs image creation
like this:
| error: Failed dependencies:
| /bin/perl is needed by autoconf-nativesdk-2.68-r6.x86_64.rpm
NOTE: package meta-toolchain-gmae-1.0-r7: task do_populate_sdk: Failed
The second sed command is for such a case:
eval 'case $# in 0) exec /bin/perl -S "$0";; *) exec /bin/perl -S "$0" "$@";; esac'
This line has two "/bin/perl" and we can't use a line number to tell
sed which line it is since the line numbers in different files are
defferent.
[YOCTO #2304]
(From OE-Core rev: 393908e53b243b16ab984da7f073be371e062946)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Generally distros keep perl at /usr/bin/perl
Fedora 17 also has /bin/perl
this causes glib-2.0 build on such distros to put perl interpreter path in
the perl scripts as /bin/perl
But we set perl location for target as /usr/bin/perl
This mismatch of perl path causes failure of rootfs image creation
like this:
| error: Failed dependencies:
| /bin/perl is needed by libglib-2.0-utils-2.30.3-r0.ppc603e
NOTE: package meta-toolchain-gmae-1.0-r7: task do_populate_sdk: Failed
[YOCTO #2304]
(From OE-Core rev: 13e6e316d751d0ea3107d5547f6bdd2b74919cad)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The perl recipe's do_configure() does some manual sed replacements over
the entire WORKDIR. Fix the following issues with this:
* Skip patches, which fixes re-execution of do_patch after do_configure
has run once
* Ensure that the replacement operation does nothing if do_configure is
re-executed
* Avoid unnecessarily modifying /usr/include paths within documentation
that will end up being packaged
* Fix a quoting issue in the expression used in the grep command that
ended up causing files that did not contain .*\.h after /usr/include
to be matched and modified.
The files modified during do_configure have been compared before and
after this patch to ensure there are no unexpected changes. Some
/usr/include paths that are not within documentation are no longer
being substituted however these are all within comments or scripts for
other Unix operating systems that are not applicable.
[YOCTO #2194]
(From OE-Core rev: 19255032e7744fce5cbe466e4869ded378d3b4f5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix for a minor type in DESCRIPTION
(From OE-Core rev: 25a997ca9b24d9265b62717fd01ebb26e7d21bba)
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The require of core-image-minimal overrides the description.
The best fix for this would be conditional setting of DESCRIPTION
in the required images for all image descriptions, but that opens
a potential can of worms. Moving the require fixes this.
(From OE-Core rev: 0bd5f0a86370881b4eb2455df21b0575f6ffd008)
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was found to cause issues on the Yocto autobuilders and fixes do_compile
failures when guile-native has been relocated.
(From OE-Core rev: d928e91a57e6e9dfa6a7d4e888e1e1064d7fc668)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We may define new OELAYOUT_ABI variable in ${DISTRO}.conf, therefore we
need to move the abi_version.conf before that.
(From OE-Core rev: 4e1a8ed1ab7e7bd950e511c79ddfe072cb280a6e)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
MLPREFIX is needed in RDEPENDS for multilib build
(From OE-Core rev: 380efadd5640e5b57e710549b1ae761d0d3b3792)
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need consistent configuration files for opkg so we might as well always use
the full list. This is equal to PACKAGE_ARCHS in the non-multilib case.
This fixes various multilib failures with ipk multilibs.
(From OE-Core rev: bc85abc5013d0c831cc3c3823df45536c293aaba)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-running the debug_patch task would cause the build to fail. This patch
moves the extra patch handling directly into SRC_URI and removes the need
for the separate task, allowing safe re-execution of each task.
[YOCTO #2194]
(From OE-Core rev: 1d6156e37ef0f36cf5ce8eeaaf23560215c86833)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the do_unpack task is re-executed, the sed_done stamp was not removed, the
sed commands wouldn't re-run and the build would fail in do_compile. This
patch ensures the stamp is in ${S} and that we clean that directory
when unpack runs so it is a build from sctatch at that point.
[YOCTO #2194]
(From OE-Core rev: 2b190155d74d4369c61d26b1f4f0c3cce389ddbc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sed command run during do_compile isn't idempotent. This change fixes it
so that it is and the compile task can be re-executed.
[YOCTO #2194]
(From OE-Core rev: c9dcfbd87d749baa0a4948738055193982aad26d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch in this recipe patches both configure and configure.in which leads
to build failures once configure has executed and regenerated configure.
The fix to make patch re-executable is not to patch configure and
only patch configure.in.
[YOCTO #2194]
(From OE-Core rev: b3df34ba57284fa2c85f34be86d5d8e357becf7c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a patch patching both configure and configure.in. Since the recipes
all autoreconf, this is pointless and means subsequent patch tasks fail.
The fix is to only patch configure.in.
[YOCTO #2194]
(From OE-Core rev: 1d8c40d5f2119b4c4ae8a9b2645ae572ea9a54ff)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were puzzling failures when you make a force recompile of any gcc
component. The error was in do_configure with cross-compilation badness
being detected in config.log files.
gcc is different in that many of the config.log files are generated during
the do_compile phase. This means this host contamination issue has always
been present but only shows up on a rebuild.
The fix is to force the appropriate configuration variable to "none required"
then gcc won't look in the bad locations.
[YOCTO #2279]
(From OE-Core rev: e7135f14f3ef37f93f5c28b319464f3d6dd9b8da)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gst-plugins-bad needs curl.h to finish its build, so add curl as its
dependency.
(From OE-Core rev: daa4d625524dc330786858ade570918cff0bc5d3)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recipe's do_patch was not able to be re-executed due to its custom
patching functions. This fixes things so that it can be re-executed.
It also fixes the unpack task re-execution by ensuring ${S} is clean
before the unpack starts.
[YOCTO #2194]
(From OE-Core rev: 1cfddb17e0c2576e55f62c10612e7cbd73e5ac5e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The all target in the makefile triggers "screen" and "remove" targets,
neither of which do anything useful/sane for our usecases. The simplest
way to get the makefile to behave is to only use the install target.
Clean up the recipe a bit whilst making these changes and simplify things.
[YOCTO #2194]
(From OE-Core rev: 06f6ca50c0cffdaf828688e01fcc70265eafa093)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There can be a conflict between the nativesdk libc and the host system's
libc. It is assumed the nativesdk version is of an equal or higher version.
This is a particular issue for pseudo if its loading a system binary
since the system's libc might be used of an older verison which would
then confuse libpseudo.so when loaded as a preload.
To avoid this, set LD_LIBRARY_PATH so the nativesdk libc is always
used.
Since we now use --without-rpath, we can remove the MAKEOPTS RPATH workaround.
[YOCTO #2299]
(From OE-Core rev: a481fe3b9883aa744be3253e2b4b27e6e46eb059)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When guile-native was relocated, there were messages like:
;;; note: source file /srv/home/pokybuild/yocto-autobuilder/yocto-slave/emenlow/build/build/tmp/sysroots/x86_64-linux/usr/share/guile/2.0/ice-9/eval.scm
;;; newer than compiled /srv/home/pokybuild/yocto-autobuilder/yocto-slave/fri2/build/build/tmp/sysroots/x86_64-linux/usr/lib/guile/2.0/ccache/ice-9/eval.go
and this confuses things like the autogen-native "guile --version"
check. This patch ensures the wrapper script sets the necessary
variables correctly.
(From OE-Core rev: 7a254d8294cfbe4b717d083c3d7fcc5515a5ab4f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix connman-gnome to work with connman 0.79, which made a number of
fairly serious DBus API changes. Also switch over to the newly
repopulated git repo on kernel.org in which the two previous patches
have been merged.
Fixes [YOCTO #2202].
(From OE-Core rev: 82744f56f8bfbdcc303034dee3d6e188cf8180b1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added distro tracking fileds for the following recipes:
qt-mobility-x11
gst-plugin-bluetooth
alsa-state
ocf-linux
avahi-ui
libjson
systemtap-uprobes
xf86-video-fbdev
u-boot-fw-utils
qt4-graphics-system
qt-mobility-embedded
lttng-tools
shadow-securetty
Also fixed a few minor typos in others (spelling of bluetooth and months)
(From OE-Core rev: c8fe4d6cde6fca736f8c00eac7a9cc217fa8a128)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The value of ALL_MULTILIB_PACKAGE_ARCHS needs to be consistent both
in multilib extended recipes and in normal context. If this isn't the
case it can lead to inconsistent configuration files at a minimum.
This patch ensures the value is preserved during the class extension code
since computing it after that point is hard.
[YOCTO #2290]
(From OE-Core rev: 529bc145152bb36d9696226b93729377a3b6a240)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PN == BPN test was designed to exclude native/nativesdk but also unfortunately
excludes multilib unintentionally. This change fixes this and allows multilib images
with alternatives to funciton correctly.
[YOCTO #2214]
(From OE-Core rev: 2878d19c4e19d76cb8be15825c40ff03f25f35f5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids a number of bogus preferred providers warnings too.
(From OE-Core rev: 823a2f96df84547216a26697838977a162f838c5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows systemtap-uprobes to build again after the recently
added patch broke the builds.
(From OE-Core rev: 4bbe926f3ca68297d70849bab67177da624316d1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Generally distros keep perl at /sur/bin/perl
Fedora 17 alpha also has /bin/perl
this causes eglibc build on such distros to put perl interpreter path in
the perl scripts as /bin/perl
But we set perl location for target as /usr/bin/perl
This mismatch of perl path causes failure of rootfs image creation
like this:
| error: Failed dependencies:
| /bin/perl is needed by eglibc-utils-2.13-r23+svnr15508.i586
NOTE: package core-image-sato-1.0-r0: task do_rootfs: Failed
ERROR: Task 8
(/home/nitin/prj/poky.git/meta/recipes-sato/images/core-image-sato.bb,
do_rootfs) failed with exit code '1'
This Fixes bug : [YOCTO #2286]
RP: Updated to better account for -nativesdk
(From OE-Core rev: 381bf0d364da5970682502f8f124264907587b87)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was using distro gcc to build binaries for target. This got detected
on fedora 17 alpha, on which it hit an gcc-4.7 issue.
This Fixes Bug: [Yocto #2291]
More information in the patch header
Thanks to Saul Wold for suggesting to remove the --target parameter from
EXTRA_OECONF var.
(From OE-Core rev: 26ae0e53411c1ea3afbb2e0c6d9dc2f1b0690751)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Here /usr/lib/lib*.so files are binaries rather than symbol links.
We should package them into ${PN} rather than ${PN}-dev, or else,
when a package, that rdepends on nspr, is packaged, we get a
"non-dev package rdepends on nspr-dev" ERROR.
(From OE-Core rev: be298b6f0168bbd6baf90602da35904c441deade)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Building the systemtap documentation adds significantly to the build
time, so disable it by default.
(From OE-Core rev: e37391a949fb0a6edf87eb910e93a17caf309119)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building docs in systemtap, docproc is used to generate the
tapset documentation, but it gets built for the target, while it needs
to be build for the host instead. This change causes that to happen.
Fixes [YOCTO #2193].
(From OE-Core rev: 6ef7112e339bb5c03dee862bc56c10fdf677be78)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During testing/extension of the linux-yocto-tiny kernel it was found that
defconfigs were not always properly applied. This was due to two issues:
- not being able to fully control the order of objects applied to the
git tree on the SRC_URI
- defconfigs triggering --allnoconfig before being applied
To fix this, the recipe space code that previously detected and generated
automatic features moves back to the kernel tools (where it was before) and
is updated to also process .cfg and defconfigs. Moving this back to the
tools allow other recipes to automatically benefit from the additional
support.
The second issue is addressed by allowing configme to take --alldefconfig
when a recipe wishes to pass a defconfig and override the default
behaviour.
Fixes [YOCTO: 2250]
(From OE-Core rev: 08c368b9980716e459d846dd7183940a5bf8bea4)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.2 recipe SRCREVs to pickup the following meta change:
[
meta: Add igb.scc to Romley
Romley machine has 82580 Giga bit Ethernet Controller.
Add the relavent Nic driver to it.
(From OE-Core rev: d7c567816bf828da34fb9e315d4d76c4181337e9)
Signed-off-by: Kishore Bodke <kishore.k.bodke@intel.com>
]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie
Venkata ramana gollamudi
Andreas Oberritter
Saul Wold
Otavio Salvador
Paul Eggleton
Robert Yang
Beth Flanagan
Dongxiao Xu
Zhai Edwin
Scott Garman
Nitin A Kamble
Dexuan Cui
Tom Zanussi
Bruce Ashfield