If sed-native is built before these programs, hardcoded paths to sed-native
can end up in scripts and other parts of the system which may cause issues
if they are later used from sstate and sed-native is not installed.
To avoid this, this patch changes the global site configuration to
specify that plain "sed" is fine to be used. We need to spell this
out for gcc since it doesn't see the site files since we don't autoreconf
it. We can remove the values from libtool. We tell perl to use "/bin/sed"
since it requires a path and the system sed should be just fine for it.
[YOCTO #4971]
(From OE-Core rev: 2ec171cb188601bf18c6c2895870907024b1c52a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
busybox 1.21.1 's mdev has changed the way the device's name is
reported so now we get input/event0 instead of event0.
I think this commit is responsible of this new behaviour :
http://git.busybox.net/busybox/commit/util-linux/mdev.c?id=c3cf1e30a3022453311a7e9fe11d94c7a381640e
Update mdev.conf according to this behaviour so that sound
and input devices are correctly populated (and now
/etc/mdev/find-touchscreen.sh is executed).
Tested on an arm board.
(From OE-Core rev: 61b2950ebbc01f5e4fd7aece05bf371100c0c390)
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping the 3.10 meta branch SRCREV to import the following config changes
for tghe sugarbay and common-pc wifi fragments.
dad2b7e common-pc-64: add kernel CONFIG options for sugarbay platform
37c617d common-pc-wifi.cfg: add support for broadcom wifi drivers
[YOCTO #5117]
[YOCTO #5238]
(From OE-Core rev: 180f465b0cab13e17dc92ac5c88d7d9001cd5b11)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the MACHINE can now be specified in adt-installer.conf, in order to
install the proper toolchain and environment script for the given
machine, add a sanity checking at the beginning to make sure MACHINE is
set for the wanted architecture.
Also:
* uncomment the x86 target variables, in adt-installer.conf, in order
to have qemux86 MACHINE set, by default, and also the sysroot
installed (since it doesn't make much sense to install the toolchain
without a target sysroot);
* remove 'sudo' when creating relocate_sdk_tmp.py because the file is
created in adt-installer directory;
[YOCTO #5259]
(From OE-Core rev: 0623a0e1bd7cf0c405a0469e9f16779971c0c3b5)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, if SDK is installed in a directory that needs sudo
preivileges, the target sysroot is also installed with sudo, even though
the location is in users's home directory.
This patch reuses the ownership checking code and uses it to check if
sudo is needed for target sysroot too.
[YOCTO #5259]
(From OE-Core rev: 5acfced041477d8c272485196e87ad601a0ce5b4)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We switched to using os.mkdir with the file creation mode specified as the
second parameter. Python masks this with umask behind the scenes which isn't
what we want, we really want the permissions we specify.
To avoid this we zero the umask beforehand and restore afterwards. Other
solutions are possible but would not perform as well which is why
we're using os.mkdir in the first place.
Martin Jansa deserves the credit for debugging where the problem was.
(From OE-Core rev: f91226553e39439bfd17ab2b06c56cb8bf41061b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of considering that ping test passed after 1 reply,
wait for at least 5 consecutive replies in 60 seconds (which should
be enough time for connman to reconfigure the interface in systemd
images and help with the fake ssh/tests fails.)
(From OE-Core rev: 6fd19a9df0ad25b2822f12e2c3a97f1b71068d4e)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add useradd, groupadd et.c. since all target packages
which inherits useradd will have a postinstall hook
dependecy against the yocto specific groupadd.
(From OE-Core rev: 829edcb6e59e2e20dd4165b727b685f286f38031)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a second in a series of patches to enable
offline rootfs creation from a package repository.
Some postinstall cmds are Yocto specific and needed to create a
rootfs with pre and post install hooks successfully run,
using only the toolchain tarball + a package repo.
End goal is to create a sandbox where users of a Yocto
based distribution can customize a rootfs from a package feed
with their package manager of choice.
With this patch, I can successfully create packagegroup-core-boot
with only the toolchain tarball(OPKG). More fixes for a few postinstall
hooks outside of packagegroup-core-boot will come next.
(From OE-Core rev: f90e1a45a042468e4e9a0fc91b57c6dba6f7adc9)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
distutils: Replacing path to native path only to be done to non-native python packages
distutils: Replacing path to native python by path to python in the
image to support python packages with console-script setup resulted in
a "bad interpreter" error message because coreutils-native is not
a specified dependency of a number of native python packages.
We modify the change to apply specifically to non-native packages.
(From OE-Core rev: 312b6b33dca565153bc2e92d7ff6dd2974db4edb)
Signed-off-by: Amy Fong <Amy.Fong@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The po.m4 file is deleted by the more recent autotools.bbclass
autotools_do_configure code which handles gettext. There is therefore
no point in patching the file anymore.
(From OE-Core rev: 986c660cdb34e23a9c72f219db9363a6b4e4b7ec)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The po.m4 file is deleted by the more recent autotools.bbclass
autotools_do_configure code which handles gettext. There is therefore
no point in patching the file anymore.
(From OE-Core rev: c3265281c3ab0979ec2753eb7580c39b005d5fa9)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do not use pushd, busybox does not support it if system only has busybox;
Replace find command with ls to avoid some busybox's find unsupported options;
(From OE-Core rev: 1f059654bc81e55896c96c7c8e32e09f8925a761)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently do_install_ptest_base is failing because it cannot find
'test' directory in build dir, ${B}. 'test' directory is present in source
dir, ${S}. Same is true for build-aux/test-driver and test/sys.tar.xz.
Also this fixes:
QA Issue: systemd: Files/directories were installed but not shipped
/usr/lib/udev
/usr/lib/udev/rules.d
(From OE-Core rev: bec8a29fb27ccdada0839d0bdd67ae22179a94e8)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pushd is not available when system is using dash as default shell
(From OE-Core rev: ec7e738845f72888b0016340d7da636e5ec46a1b)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If do_patch re-executes, patching the configure script will fail because
it will have been regenerated during do_configure. We're patching
configure.ac so we don't need to patch configure anyway.
(From OE-Core rev: ae98a95577ba9c8a6a0d9a78d4cea33a92adff35)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Documentation.conf is used in WebHob to display
information strings about the collected variables.
This patch brings the file up-to-date with latest
information available from the manual.
(From OE-Core rev: b9743c7b130bda3e50cdba4cf260232f1c24abcd)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It causes shadow to be used in core-image-minimal and increase the
size by 1.5M. We will add the shutdown user to group via base-passwd
which we depend upon instead.
[YOCTO #5230]
(From OE-Core rev: e33e4c30a4fa5b98903d6a46cdcc5bca9cf50848)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since using useradd in sysvinit causes core-image-minimal to
gain shadow utilites instead of using busybox, we add the
shutdown group directly.
[YOCTO #5230]
(From OE-Core rev: 47ebf756efeb88727459165e00c16671854e19a9)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5233]
Modeled after Chen Qi's fix to [YOCTO #3924] from oe-core commit:
6b6db7b4fb7aa17b8e29076decc830149b9d35bc
init-install.sh: remove unnecessary udev rules file to avoid error messages
/etc/udev/scripts/mount.sh is removed by init-install-efi.sh, but the
udev rules file which specifies the invocation of this script is not
removed, thus causing the error message during a live install:
/etc/udev/scripts/mount.sh: No such file or directory
The /etc/udev/rules/automount.rules no longer works once the mount.sh
script is removed. Remove it to avoid the error message.
(From OE-Core rev: 1f5a2b616d902b1158e348bf8c33b6d36e21cadc)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: mihaix.lindner@linux.intel.com
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5237]
The current grub.cfg manipulation depends on an existing root=
parameter. If this doesn't exist, the correct root= parameter will not
be added.
Instead, remove any existing root= parameters and add the correct one
explicitly.
(From OE-Core rev: 14b124122c1b7d10b9a3a96fe4617c6fc1c661c5)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: mihaix.lindner@linux.intel.com
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The changes in this commit, dc5f6c3898,
moved apt config directory from native SYSROOT to WORKDIR.
Unfortunately, Dir::Etc in apt.conf was not changed accordingly and
sources.list file could not be found during do_rootfs().
This commit fixes this issue.
[YOCTO #5241]
(From OE-Core rev: 65a2a1e1d0b0e3dcc34d47f46185f24d753b53dd)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
That is a generated file and patching it might fail, the patch already patches configure.ac
which will have the configure file regenerated.
(From OE-Core rev: daa56093de3a518b79480c90ec5124a79189bf7b)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we dont use prelude in OE, we just disable autodetection of
prelude in the libpam configuration.
Seems like an old bug:
http://lists.openembedded.org/pipermail/openembedded-devel/2012-March/083804.html
(From OE-Core rev: 9096c6a46cf2467c90873c235b4533faf97d6175)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a first in a series of patches to add items
to the nativesdk toolchain tarball.
Many of which are Yocto specific and needed to create a
rootfs with pre and post install hooks successfully run,
using only the toolchain tarball.
End goal is to create a sandbox where _users_ can customize a rootfs from a
package feed with their package manager of choice.
(From OE-Core rev: e70019bcdce83ae2a202338518f8725775abaa32)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Libtool scripts were finding bash was /bin/sh and then using bashisms which
then got into sstate and used on machines where /bin/sh might be dash.
This changes things to search for bash first since its preferred. We then hardcode
bash into the scripts which is more correct.
This does mean we have a dependency on bash but many of our scripts have
that anyway.
(From OE-Core rev: 367a19aaf31bcf997f10d045e7954cc800189052)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
QEMU machines don't have virtual IrDA or PCMCIA hardware, so don't claim to
support them.
(From OE-Core rev: 694ca965eea971077e135cda4e54fa1cb0243233)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Until now, the comment in the boost.inc file suggested to enable
the boost-python library by uncommenting some lines in that file.
Using the new PACKAGECONFIG feature, boost-python can now be added
optionally without need to modify the file or copying those lines
into a bbappend file.
Furthermore, we obtain the python version by inheriting python-dir
instead of fixing the python version in this file.
This commit is motivated by the need in the meta-ros layer, as
discussed in the issue #145 of the meta-ros issue tracker [1].
[1] https://github.com/bmwcarit/meta-ros/pull/145
(From OE-Core rev: 7568bfdd114597956a1da68746f207ec7f93a48d)
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the kern-tools SRCREV to import the following change:
kgit-s2q: always update ORIG_HEAD after applying changes
In situations where git am fails to apply patches, and git apply is used,
we must update ORIG_HEAD as well as HEAD. This is required, since if the
next patch in the queue also fails git am application, it will reset to
ORIG_HEAD before using git apply. If we haven't updated ORIG_HEAD, we'll
end up warping back to the top of the branch each time.
This problem can only be seen in very specific situations, in particular if
a generated BSP branches from qemuppc, and has a series of non git "am able"
patches. We fail, since all of the qemuppc patches are not applied due to
the branch head constantly being reset.
(From OE-Core rev: 5126ac0aeb3154d31769dc20a46b6b1a6b2e3d9b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There might be an error when parallel build:
[snip]
Traceback (most recent call last):
File "/path/to/tools/glib-gtypes-generator.py", line 304, in <module>
GTypesGenerator(dom, argv[1], argv[2])()
File "/path/to/tools/glib-gtypes-generator.py", line 295, in __call__
file_set_contents(self.output + '.h', ''.join(self.header))
File "/path/to/tools/libtpcodegen.py", line 42, in file_set_contents
os.rename(filename + '.tmp', filename)
OSError: [Errno 2] No such file or directory
[snip]
This is a race issue, the _gen/gtypes.h and _gen/gtypes-body.h may
write(remove/rename) _gen/gtypes.tmp at the same time, then there would
be the error.
There was a similar bug in telepathy-glib which was already fixed, we use the
similar patch to fix it here.
[YOCTO #5184]
(From OE-Core rev: b0f81f460cf96798d79d72da7a3246c321caf654)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This enables building libav when x11 is not in DISTRO_FEATURES.
(From OE-Core rev: 9b7131e855293064e044cd79259eb350a14f319b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds info about tests run even if they passed (in case of errors log will
be printed anyway). Also some style change for qemu object.
(From OE-Core rev: 4adcf960be9c7477e314788d42b80753c2aaf572)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove a package from rootfs only if it's already installed. Also,
if a package is uninstalled, remove it from installed_pkgs.txt.
[YOCTO #5169]
(From OE-Core rev: b86dc63bc87763119fce8286f37f44361da824d0)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sstate_package creates hardlink from sysroot to SSTATE_BUILDDIR, and
sstate_create_package stores SSTATE_BUILDDIR into a archive file by
tar, these two task can be run simultaneously for different packages,
and make a hardlink for a file will lead to the change of the links
number of file, and if tar is reading this file, it will fail with exit
code 1, and report "file changed as we read it":
DEBUG: Executing shell function sstate_create_package
tar: x86_64-linux/usr/share/aclocal/xorg-macros.m4: file changed as we read it
4b3e353a5[sstate.bbclass: fix parallel building issue] tries to use the
tar parameter --ignore-failed-read to fix, but it does not work, and
tar parameter --warning=no-file-changed can close the warning, but can
not change the exit code. so close shell immediate exit, only fail
if tar returns not 1 and 0.
Exit codes of tar:
http://www.gnu.org/software/tar/manual/html_section/Synopsis.html
(From OE-Core rev: fad604b719e00b03e09da5fdb485e72332275b4a)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With buildtools (which contains Python) installed on a build machine,
glib-2.0's gtester-report script was ending up with the full path to
the installed python binary in the shebang, which when rpm packaging
was used led to this being added as a per-file dependency by rpmdeps for
the libglib-2.0-utils package in which it ends up. This of course broke
do_rootfs when the package was included in the rootfs and had been
restored from sstate from another machine, as happened on the Yocto
Project autobuilder.
We were already trying to sed this script apparently only for the
shebang (since it appears that there are no other paths in the script)
so let's just sed the shebang properly; it also seems sensible to do
this for native as well instead of explicitly trying to exclude that
case.
Fixes [YOCTO #5205].
(From OE-Core rev: 1d16e8035dda062041394b1e51839a9a7d077cf5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we split S and B for avahi in OE-Core commit
6112a07f4e9865f7ae0e5a953669c1adf789f9f0, files left over in the workdir
from a previous build seem to break re-execution of do_configure. Bump
PR to give a fresh workdir and avoid this problem.
(From OE-Core rev: bdcddb4fa7ceb3408d687d4c39b0f631d3b31f96)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The --enable-dependency-tracking option was added to workaround build
issues in libatomic. This fixes that build problem properly and removes
the flag since the dependency tracking code appears to be full of races
which are much deeper and harder to fix.
As per the automake manual, dependency tracking is only useful and worth
the build performance cost if you are doing more than one compile of the same
source code which in most cases we are not so this is a good thing anyway.
(From OE-Core rev: a3b665a80abed4c0659925e1cceb1568af023711)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
| DEBUG: Executing python function sstate_task_postfunc| DEBUG: Staging files from /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-minimal/1.0-r0/license-destdir to /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/deploy/licenses| NOTE: Using umask 002 (not 22) for sstate packaging| DEBUG: Preparing tree /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-minimal/1.0-r0/license-destdir for packaging at /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-minimal/1.0-r0/sstate-build-populate-lic/license-destdir| NOTE: Removing hardcoded paths from sstate package: 'find /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-minimal/1.0-r0/sstate-build
-populate-lic/ \( -name "*.la" -o -name "*-config" -o -name "*_config" \) -type f | xargs grep -l -e '/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/sysroots/qemux86-64' | tee /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-minimal/1.0-r0/sstate-build-populate-lic/fixmepath | xargs --no-run-if-empty sed -i -e 's:/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/sysroots/qemux86-64:FIXMESTAGINGDIRHOST:g''
| DEBUG: Executing shell function sstate_create_package
| gzip: /lib64/libz.so.1: version `ZLIB_1.2.5.1' not found (required by gzip)
| tar: Child returned status 1
| tar: Error is not recoverable: exiting now
| WARNING: /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-minimal/1.0-r0/temp/run.sstate_create_package.20384:1 exit 2 from
| tar --ignore-failed-read -czf $TFILE license-destdir
| DEBUG: Python function sstate_task_postfunc finished
| ERROR: Function failed: sstate_create_package (log file is located at /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-minimal/1.0-r0/temp/log.do_populate_lic.20384)
NOTE: recipe core-image-minimal-1.0-r0: task do_populate_lic: Failed
Imagine:
pigz-native is used from sstate.
zlib-native is getting rebuilt.
pigz-native has some special handling to ensure its not used until the
system is ready. This is through a class and installing into a subdir of
PATH which only gets added in when we believe its available. We use
pigz-native in the image generation code and its in DEPENDS.
DEPENDS are guaranteed available for do_configure. do_populate_lic can
run before do_configure so the DEPENDS isn't met and I think this is our
corner case.I suspect ways of fixing this are to either:
a) force do_populate_lic after do_configure everywhere
b) statically link pigz-native
c) add in an explicit dependency to gzipnative.bbclass forcing
do_populate_lic after do_configure. If do_unpack handled a tar file in
an image, it would also be at risk of course.
Looking at each, a) is overkill and our dependency tree is nasty enough
already. b) sounds nice but is also risky since what happens if the gzip
binary is half copied when we run it. Our hardlink copying should deal
with that but I'm still nervous. This leaves us with c) so we could do:
do_unpack[depends] += "gzip-native:do_populate_sysroot"
The reproducer is:
bitbake pigz-native
bitbake zlib-native -c clean
bitbake core-image-minimal -c populate_lic --no-setscene -f
however your system needs to have an old version of zlib on it which
pigz-native can't run against. The line above fixes it.
(From OE-Core rev: 16cb83d13bdb7e1abc88c18ec224efcd9ceef4f6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
btrfs-tools was failing occasionally due to version.h being missing. This
fixes the problems, thanks to several people on #yocto for helping out
why my lack of make knowledge of old fashioned suffix rules :)
(From OE-Core rev: 7be8010186889cece97829025d97d94f21c1f2e5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The class now consolidate the handle of UBOOT_MACHINE and UBOOT_CONFIG
variables and handle possible mistakes done by user when using these
variables.
(From OE-Core rev: 87d9b585b2784bec04e9e244dc52c6e929484fd0)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The U-Boot configuration has been consolidates into a single class to
avoid code duplication. This is now done by uboot-config class, so we
now use it.
(From OE-Core rev: d0bc7a53b1e61283fb155b4dcb67bc2ab3b1d7f0)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The processing needs to happen per recipe and thus it ought to use
annonymous python function instead to be triggered at event.
(From OE-Core rev: 75bde3ee02262cb3c6b91279ca277e3e5324ee5e)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initscript sequence numbers are 00-99, so using 999 resulted in systemd warning
that it couldn't find "9oprofileui-server".
(From OE-Core rev: dac7dd70eb7a55ada5fdfc224aba5bac7c49f63f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
So that sysvinit images don't warn on every login only add it to common-session
if systemd is a DISTRO_FEATURE.
[ YOCTO #3805 ]
(From OE-Core rev: 3ccb0855a7a6b147e5025855c6376747ba72986a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's a standard way of announcing VNC services over mDNS that x11vnc
supports, so respect the feature and enable/disable it.
Also re-order the statements and drop the redundant PR.
(From OE-Core rev: e5443a0b5a70bf054cbeb6ff1fd6b5ef9d2347f8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The exported SDK only needs simulated root privileges for specific
tasks, such as the user-mode NFS server or rootfs extraction, and
oe-core does not support multilib builds in the generated SDK, so
it is neither necessary nor possible to build a 32-bit libpseudo.so
for a 64-bit SDK.
[YOCTO #5135]
(From OE-Core rev: 908b179b798704db74c886ec4c70c0942b09cb00)
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This has now been superseded by testimage.
(From OE-Core rev: d469c92394a1a95ae7a45b8b80dc4c2918e0e9a6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the sanity test for DISPLAY being set to handle the new testimage
class rather than the old imagetest-qemu class.
(From OE-Core rev: d1297c2c3ae71de0e9e5cab36e582f5df8666391)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Setting TEST_IMAGE = "1" alone will now automatically run tests on the
image immediately after the image is built instead of having to add
INHERIT += "testimage" and run bitbake -c testimage <image> manually
(but that will still work). This restores functionality that was
present in the older imagetest-qemu class with IMAGETEST.
(From OE-Core rev: 72269a8fbec35c39af30fbabb1fa9ca7c5ee8d69)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the test "Test against HP-UX 11.11 bug:
No converter from EUC-JP to UTF-8 is provided"
since we don't support HP-UX and if the euc-jp is not
installed on the host, libunistring will be built without
iconv support and will cause guild-native configure fail.
(From OE-Core rev: 0470bd7a9658d3d8aa10e9d081f42b61b9b7a6f4)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pcimodules can not work due to no modules.pcimap file, and has been
replaced by "lspci -k", so we can remove it.
Update lib-build-fix.patch since remove pcimodules-pciutils.diff.
[YOCTO# 5210]
(From OE-Core rev: 57bec61b05c0fea42f988dd52942c7d5ce8833fd)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- move everything in the same test. setUp/tearDown aren't quite
the right thing here, everything it's part of the same test. (and
it get's confusing when ssh fails)
ldd:
- change test name and add output to error message
vnc:
- remove unnecessary check as there is no point in doing
both ps and netstat. Also improve error output a bit.
(From OE-Core rev: 2f91bb438cfcdd0a40daed5902b6e98fc0aee67f)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It might be useful for debugging to have in the ssh log
the number of seconds a command has run.
(From OE-Core rev: 48b9e45b9716130b015ae2ab7398d6aa243933dc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The BASE_WORKDIR variable can be used instead of enforcing WORKDIR being
TMPDIR/work (and aborting the build if it isn't).
(From OE-Core rev: 176a36ace1624f3bbe498307aeabbd7935de14e6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To make it easier to move WORKDIR, define it using the new variable
BASE_WORKDIR, which is the root of the work directory.
(From OE-Core rev: 1eee097f2e29b9d6934711c0b1d32e59e9542f53)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* temporary work around for build issue on armv4t:
| cp/decl.o: In function `bad_specifiers':
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7171:(.text.unlikely+0x24): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7173:(.text.unlikely+0x32): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7176:(.text.unlikely+0x3e): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7180:(.text.unlikely+0x4c): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7182:(.text.unlikely+0x5a): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7185:(.text.unlikely+0x66): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7189:(.text.unlikely+0x74): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7191:(.text.unlikely+0x82): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7194:(.text.unlikely+0x8e): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7198:(.text.unlikely+0x9c): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7200:(.text.unlikely+0xaa): additional relocation overflows omitted from the output
| collect2: error: ld returned 1 exit status
| make[2]: *** [cc1plus] Error 1
(From OE-Core rev: 148c7e990831ed708f7fb064ec8f05657a323850)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
perf's builtin-sched.c triggers extremly long build times on some
architectures due to gcc 4.7+ var-tracking functionality.
To fix this, we can cherry pick the 3.12 commit:
f36f83f94 [perf sched: Move struct perf_sched definition out of cmd_sched()]
With this change build times are reduced from 15 to 20 minutes for qemuarm to:
real 2m19.940s
user 1m35.438s
sys 0m11.165s
For kernel's that are not carrying this patch, the following can be added
to the perf recipe to also fix the issue:
+++ b/meta/recipes-kernel/perf/perf.bb
@@ -68,6 +68,7 @@ EXTRA_OEMAKE = \
CC="${CC}" \
AR="${AR}" \
perfexecdir=${libexecdir} \
+ EXTRA_CFLAGS="-fno-var-tracking" \
NO_GTK2=1 ${TUI_DEFINES} NO_DWARF=1 ${SCRIPTING_DEFINES} \
(From OE-Core rev: 82ad5305381c2f541ef051a8fc28243cd91776fe)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.10 SRCREV to import the following MIPS configuration changes
4f689aa meta: remove ftrace/ftrace-disable feature
3058d81 mips: have the mips BSPs disable function tracing instead of ftrace
935f43f meta: add ftrace/ftrace-function-tracer-disable feature
0d72a03 mti-malta64: Default to support o32 and n32 userspace binaries
The first three changes improve the ftrace disabling fragments, to allow tracepoints
and ftrace to be enabled, while only disabling dynamic ftrace. This allows tools
that required tracepoints (like lttng) to be built against MIPS.
The mti-malta64 change adds n32 and o32 support to the default configuration to
support a broader range of userspace binaries.
[YOCTO #5215]
(From OE-Core rev: b2cadab5c7a5d3f772c34c04b759823ed6a122bf)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping the meta branch SRCREV to import the following board support:
meta: add haswell-wc bsp for Intel Haswell Platform (Walnut Canyon CRB) scc and config files
Signed-off-by Ong Boon Leong <boon.leong.ong@intel.com>
(From OE-Core rev: fcca6317543e8be0bd2da1f45ac99448c24b4e48)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The LDFLAGS is required or some old kernels fails due missing
symbols and this is preferred than requiring patches to every old
supported kernel.
Fixes [YOCTO: #5221]
(From OE-Core rev: 0eccbf2016e89e6f1c3796f138b02a508d2edbcf)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the new QEMU_DONT_GRAB environment variable to disable grabs,
finally/hopefully solving the random hangs that the autobuilder has been hitting
for a while.
[ YOCTO #5131 ]
(From OE-Core rev: 32f9575a565f350649264c11eceba8311584b0fd)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the mouse pointer enters the qemu window it takes a pointer grab. This
doesn't sound too dangerous at first but it turns out that SDL will infinitely
busy-loop if it can't get the grab (e.g. if the screen is locked) and the
average autobuilder setup's X server will have locked the screen a few minutes
after boot.
The result is that on many autobuilders apparently random qemu instances (the
top-most one under the pointer) will hang during boot.
To resolve this add an option (via an environment variable) to never attempt a
grab. The default behaviour remains to grab so that everyone else doesn't see
any change.
(From OE-Core rev: a60b1ebbb8f81245f3ccf25b3f9d63677de75b85)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The UBOOT_MACHINE variable needs to be set so the firmware utils can
know about some configuration settings which are board dependent. This
patch ensures the package is skipped in case UBOOT_MACHINE is unset
thus avoid its build in 'bitbake world' builds for incompatible
machines.
Fixes [YOCTO: #5223]
(From OE-Core rev: d9abcc0a2a691ca60cc1cb2f48f1748b0de73ac8)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel build system does the right thing here and we should stop
overriding it. This code has been added based on a change from
'meta-metro' layer, revision 9d698004137c1a888d40d6a4808d94afa22387e7,
without any information about what problem it fixes so I am reverting
it.
Using the CFLAGS and LDFLAGS makes it impossible for kernel build
system to append to it, thus making the build fail in various ways as:
| CC /.../perf/1.0-r8/perf-1.0/perf.o
| In file included from builtin.h:4:0,
| from perf.c:9:
| util/util.h:74:24: fatal error: lk/debugfs.h: No such file or directory
| #include <lk/debugfs.h>
| ^
| compilation terminated.
The unset is done in do_compile and do_install otherwise it /rebuild/
perf as it detects the compiler options has change.
(From OE-Core rev: 2e90f8846db0f3ed99a175befff9ec67fe12bc4e)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building cmake for native, we don't use the system libraries and
thus cmake builds its own internal version of libarchive; this requires
zlib, bzip2, and e2fsprogs. We can add to DEPENDS for the two former
libraries and patch out the latter.
(From OE-Core rev: fe6ca47a256b775e1aa5750b9dd31e27230cf781)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As there are two alternative mesa recipes (mesa and mesa-gl), there needs to be
a virtual provider that recipes that explicitly need Mesa (such as xserver-xorg)
can depend on.
(From OE-Core rev: 4a407568472d3c87cd2ce11baf199568249640b6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch updates libtool.m4 (and its output) to resolve a problem
with variable 'lt_sysroot' not being properly updated if the option
'--with[-libtool]-sysroot' is not provided when running the 'configure'
script for a package.
According to the help text ouput from 'configure':
--with-libtool-sysroot=DIR Search for dependent libraries within DIR
(or the compiler's sysrooot if not specified).
Due to mixed up cases in a switch statement, when checking if the option
was specified or not, wrong actions were taken resulting in an incorrect
sysroot and failures to properly locate e.g. .la files when using the
populated SDK toolchain.
For current upstream status see:
http://lists.gnu.org/archive/html/bug-libtool/2013-09/msg00005.html
(From OE-Core rev: f5cf7e1a5c85fb320faa9cbeef24f491706b4c1d)
Signed-off-by: Hans Beckerus <hans.beckerus at gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a "File name too long" error when len(TMPDIR) = 410, this is
because the function getLocalPath() converts the filepath into the
filename, so there would be the error when len(filename)
> NAME_MAX, truncate the filename to meet NAME_MAX will fix the problem.
[YOCTO #5201]
(From OE-Core rev: 9f0427edee6bf62d3fe7cdceb07f59a5776c8c4f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The latest upgrade changed u-boot-fw-utils to u-boot-fw-utils-cross, which
removed the on-target fw_printenv (and fw_setenv).
Re-create the updated version of the u-boot-fw-utils recipe.
U-Boot does try to strip the fw_printenv binary by default now. To avoid
this, without patching the Makefile, we add HOSTSTRIP=true to EXTRA_OEMAKE.
The new U-Boot do also require us to configure the build for a specific
machine, thus we change the package arch.§
(From OE-Core rev: 83cb07047658e2e2b2d721e1b01553d4df3d8636)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some machines have hardware-specific GL drivers that do EGL and GLES (many ARM
boards). Others have their own EGL/GLES drivers and provide a Mesa DRI driver
(EMGD). Previously adding Mesa, for software GL/GLX rendering in the first case
and hardware GLX in the second, involved bbappends and changing Mesa to be
machine-specific.
By adding a just-GL Mesa the machine definition can combine it with the hardware
drivers cleanly.
(From OE-Core rev: f5a3a4bc33109181c741a2e66c13d0b45566e8fa)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There would be an "Argument list too long" error when the TMPDIR is in a
deep dir, for example, when "len(readlink -f TMPDIR) >= 350 (our
supported value is 410)". Use "$(foreach ,,$(shell echo))" to fix it.
There was already a patch which tried to fix this issue, so squash the
current change into the previous one as Bruce suggested.
[YOCTO #5138]
(From OE-Core rev: 4e10c45d7c61ac1ccf8b53ef525ca03d3d458bba)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In busybox, util-linux and shadow, su has been moved to /usr/bin/,
but lsb cmdchk needs su in /bin.
Move su to /bin could fix this issue.
[YOCTO#5175]
(From OE-Core rev: ba84662bd9fb7575e68c87449e986535a2216b30)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In busybox, util-linux and shadow, su has been moved to /usr/bin/,
but lsb cmdchk needs su in /bin.
Move su to /bin could fix this issue.
[YOCTO#5175]
(From OE-Core rev: 464d274e45bb94d9990577d85aa5ad02eb5da99c)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In busybox, util-linux and shadow, su has been moved to /usr/bin/,
but lsb cmdchk needs su in /bin.
Move su to /bin could fix this issue.
[YOCTO#5175]
(From OE-Core rev: daff19fe6f0490dc7036602e8b0ca40a23b55556)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It fixes the following failure:
"fatal: Missing privilege separation directory: /var/run/sshd"
when sshd is started through xinetd.
(From OE-Core rev: a343c32891aa46a7f7d5f0cc6d1266a387900dad)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd-udevd is back in /lib, so revert this change.
This reverts commit 27bb516be4.
(From OE-Core rev: 3f6324a86cb8c1c253af06a1033ac71fa61c58d3)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove both imake and the associated xorg-cf-files, as nothing has used imake to
build for a long time.
(From OE-Core rev: aa6d9296e7c7e5b96d868d9c17d639b4f33ca18e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The libqt-mt is tested by lsb-dist-checker and lsb-test-desktop,
and it locates in meta-qt3 layer.
So if meta-qt3 is not added, there should be a warning to call
attention; if added, it will add libqt-mt to RDEPENDS.
[YOCTO #5153]
(From OE-Core rev: f646f96015b408f4c6d56998f08178a69ed9f2a6)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The update is needed to support generation of EFI boot images that
work with optical media. Specifically the "-eltorito-platform efi"
capability for mkisofs is needed.
[YOCTO #4100]
(From OE-Core rev: aaa85b0706197423786dfeae386dbb402ee15684)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to call the fat image creation multiple times it needs to be
in its own function. A future commit will make use of the new
function to additionally create EFI image files for use with an ISO.
[YOCTO #4100]
[YOCTO #1913]
(From OE-Core rev: 6d5181dc68766f42416a41f4988e8400d37fd7fa)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There would be an error when the TMPDIR is long/deep, for example when
len(TMPDIR) = 350 while our supported longest value is 410:
[snip]
aclocal: error: cannot open xxx
autoreconf: aclocal failed with exit status: 1
ERROR: autoreconf execution failed.
[snip]
Let aclocal use the relative path for the m4 file rather than the
absolute would fix the problem.
Another fix is that we can modify autotools.bbclass to let it use the
relative path rather than the absolute, but I don't think that we have
to do that based on the following 2 thoughts:
* The coreutils is the only recipe which has this issue as far as we
know when len(TMPDIR) <= 410, because it has the most amount of m4
files (more than 400 ones).
* That would impact all the recipes which use autotools.bbclass, and we
are not sure about the side effect, for example, it would break the
build there is a sub-configure.
[YOCTO #2766]
(From OE-Core rev: 22ac874512c2c1213aae8e1644bd59050b37a63c)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie
Eric Bénard
Bruce Ashfield
Laurentiu Palcu
Stefan Stanacar
David Nyström
Amy Fong
Roy Li
Saul Wold
Muhammad Shakeel
Paul Eggleton
Belen Barros Pena
Joe Slater
Darren Hart
Ross Burton
Lukas Bulwahn
Robert Yang
Chen Qi
Otavio Salvador
Randy MacLeod
Jackie Huang
Martin Jansa
Hans Beckerus
Anders Darander
Hongxu Jia
Ming Liu
Li Zhijian
Jason Wessel