I changed a couple of id strings so that they are not duplicates.
I did this to eliminate a make error while experimenting with creation
of the single HTML YP document comprised of the individual docs.
Changing the id strings has no consequence on the individual Application
Developer's Guide and Kernel Manual.
(From yocto-docs rev: 4e6832eca319a637be693dfe67ee56c540dfddfa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The detailed chapter that describes how to install and configure
the Eclipse Yocto Plug-in has been moved to become a subsection of
the "Workflow" chapter in the YP Development Manual. This commit
accomplished the bulk move, edits to integrate the information,
and fixes to all cross-references. Moving the chapter creates a
sectioning issue in the YP Development manual that results in
subsections that are six levels deep. Not ideal. Will look at
fixing these with a subsequent commit.
(From yocto-docs rev: e6abff8f578f2cf6997895260f607395281ae8e8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor edits to create some links to some terms used.
(From yocto-docs rev: 1559b8caca07cce8630de9ddf8c84f0b24fa35e7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made a pass through this chapter and focused on better descriptions for
getting the system ready for application development. I made adjustments
to better represent what is really being done. It is not all ADT here
as was being described before. Miscellaneous edits and improvements
throughout.
(From yocto-docs rev: 3544beda4794005fe139d7620fd13618fab05534)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I edited the text so that the purpose of the manual is clearer.
I have segmented out the ADT into distinct components and made sure
the overviews of each is good. Edits to clarify the role of the
ADT as well.
(From yocto-docs rev: c4abd8305dcdba986f1e761887c740e8322bb331)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
figure updated to reflect new manual title.
(From yocto-docs rev: 420bad21ffe1d1fd60a1bbbe66f3e1463b80cff9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of moving the reference manual to a real reference manual I
am removing the "appendix" classification and having everthing be
a chapter. I changed the "ref-imagese" and "ref-features" appendices
to chapters and made any references in the doc set use the proper
term now (chapter).
(From yocto-docs rev: 08117634034a5cd5567c971957583d986c9ee9a4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes throughout the manual that either eliminate or change
many of the "Yocto Project" strings. The file structure for
the meta data is now called "source directory." The build
directory is referred as just that - "build directory." Any
where the build system is referred to it is called the
"OpenEmbedded build system."
(From yocto-docs rev: 1210c19f90d4a52042fec12657212ae3e58e13d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note to warn the user about mixing ADT Intaller installation
methods.
(From yocto-docs rev: 718a48a7ea4753eb1e59e17a75c3d94a9ed166bb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The dialogue for the Yocto Project Settings is now "Yocto Project
Settings" instead of "Project Yocto Settings." Updated the manual.
(From yocto-docs rev: 980b4d22dab4ac681c6dc1a85e78306213799062)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The selection "Yocto ADT Project" has changed to "Yocto Project ADT
Project."
(From yocto-docs rev: aa61cd4f93e08373ef430926c008da9f28f72ff8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section that describes how to generate the cross-toolchain into the
Yocto build tree erroneously referred to this process as installing the
toolchain. Furthermore, it actually mentioned the creation of a
toolchain tarball, which is wrong. I updated the section to more properly
refer to this procedure as generating the toolchain. I also removed the
bit about the tarball creation.
(From yocto-docs rev: 5ae8faa651ed6bf22c5475a4eacb5c758c62cea1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The item to click in the step to configure the Eclipse Yocto Plug-in
changed from "Yocto ADT" to "Yocto Project ADT."
(From yocto-docs rev: fc860fe497be6da189e8e48f9546b105b9ff0075)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is important that the environment uses a host gcc when running the
adt installer. I put some text in noting that.
(From yocto-docs rev: 7f63662913d6d79843e1bdcadc49bb120bb72688)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2445]
Added a note telling the user not to install Eclipse from the distribution's
package repository but to rather be sure to install from the official
Eclipse download site.
Also, changed the tarball name from having a "3.7.1" in it to the
recent version of "3.7.2".
Reported-by: Lianhao Lu <lianhao.lu@intel.com>
(From yocto-docs rev: f50d0071e39a5e8424633a55ab2c3fdc75e9686d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added entries for the Manual History table for upcoming 1.3 docs.
(From yocto-docs rev: 430b384035593cd05c4f286e20c01f0fe72da8ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After some discussion from Song and Richard, the dates in the
manual revision table has been updated to "April 2012" for the
1.2 release.
(From yocto-docs rev: b3fc2ec7c5aedb8ea0a2d502bdcd7e8f4092ed96)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did a quick and dirty scrub over the manuals for the strings
"1.1" and "edison". I found some instances that were not properly
variablized. Also, discovered some references to the
linux-yocto-3.0-1.1.x. All but one instance of this needed changed
to linux-yocto-3.2.
(From yocto-docs rev: 620fb4b7626defcefc8a039de09ae4599ee7f454)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Five tables updated for the five manuals that have the tables.
Used "May 2012" as the date.
(From yocto-docs rev: 0d4d46ba300c07ff9c73186506be5b409bef9d1b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There needed to be an entry in all the manual history tables
that indicated this version of the manual is for 1.2 but is
WIP.
Reported-by: Rudolf Streif <rudolf.streif@linux.com>
(From yocto-docs rev: 6792b88af4f0171cfc84e4d77bda871d4af3d36c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hongna Xu realized that the whole Bitbake Commander part
is missing in the ADT manual. This should be Section 4.8. She
sent the info and I created a new section titled
"Customizing and Image Using a BitBake Commander Project and Hob".
Reported-by: Hongna Xu <hongnax.xu@intel.com>
(From yocto-docs rev: eb207806dbd2f73089068ef9e3fa447aa8a38404)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Addressed all issues specified by [YOCTO #2025] except for the
very first one that says bring the versions up to 1.2. This will
be accomplished by the poky.ent bump at release time.
Fixes [YOCTO #2025]
(From yocto-docs rev: 926e5635d8cd74fff7e00002108ce8c039252203)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The style for the note, caution, warning, and tip headings was a bit
over-bearing. Feedback from the community indicated that those words
needed to be in a smaller, less noticeable font. I created the style
so that the font's size is about half of what it was and I also changed
the color to match the other headings.
(From yocto-docs rev: f54c6274e1972c52ba17d7ebd2ba84bf6d59c105)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Conversion of hard links to use the variables set up in the file
documentation/poky.ent.
(From yocto-docs rev: edbacc1b57f02c31ff6eaee666245be83fb17543)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated all the CSS style sheets so that the Note, Warning, Tips,
Caution, etc. boxes are not so prominant.
(From yocto-docs rev: 451568553e9620c1e247c2f67b0665b184c3300b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bad wording fixed to describe the changes to PATH when the setup
script is run.
(From yocto-docs rev: 0f2ae72edfab2a96cb5f82fac641f3b6fa364f36)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The menu for the YoctoTools in Eclipse moved from underneath
"Windows" to the top level. I fixed the reference to reflect
that change in the GUI.
(From yocto-docs rev: 10142812f55bce849b31c38337b0a731d71d2ba0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the wording in an example to use "menu" instead of
the incorrect "navigator pane".
(From yocto-docs rev: 751ac717d17356a77cd3967f9214be74a7bad910)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a bit more information to the third step of the
example that reconfigures a project.
(From yocto-docs rev: e21ebe5b665b50705fa863436e83af6cbd00eb5d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed a redundant link to the QS manual.
(From yocto-docs rev: 44ab96f9eaad8e57de760e2612e1a92bfe2ea898)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I worked through these methods and discovered a bit more on how
they actually work and when the user would use a given method.
The updates reflect this new knowledge.
(From yocto-docs rev: aa588a2bd2c28cc42db3a539ca5aba7233612de7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed redundant link for referencing a section of a different
manual.
(From yocto-docs rev: 5a78f2c4453944e750a0250f585bcb0614dbcbf6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added text to show how to unpack the generated ADT Installer
tarball.
(From yocto-docs rev: 32e7413623a5b43484d402989f892527e4a0fc48)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The URL for the edision tarball was old and had been locked down in
the manual too early. It changed and now this fixes it.
(From yocto-docs rev: c1668e41babd7ef592dc26271943c99bacc3f181)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I replaced the link with the URL that uses 'downloads.yoctoproject.org....'
(From yocto-docs rev: fef7ca4f2a549fabc1932a40a46cf0c6c834074f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the name was off. It was 'yocto-eglibc-x86_64-i586-toolchain-1.1.tar.bz2'.
Really, the name is
'poky-eglibc-x86_64-i586-toolchain-gmae-1.1.tar.bz2'.
(From yocto-docs rev: 3d051f3e814f27f661ce153b66735f75a4152d04)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the link to be 'download.yoctoproject.org/releases/yocto/yocto-1.1'
I also fixed the text that indicated 'i586' as a directory for the
32-bit machines. The real directory name is 'i686'.
(From yocto-docs rev: fc08acdce64bac7c2b3d4689e16cf06e70f6cbe5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During development, a footnote was added to the Development
manual. In order to get the footnote to display correctly, I
had to introduce a footnote element in the style sheet. This
commit propogates the style to the other manual CSS sheets.
(From yocto-docs rev: 0439b46620125f2cb26dff4e8c79fc479205133a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are many references to YP documentation throughout the
YP manual set. They used to have hard-coded links to the
current release (e.g. yoctoproject.org/docs/1.1 for Edison).
This created a situation where if you went to a document on
the website and clicked on a external reference to another
manual, you would redirect to the current manual on the website.
Really, you would want to go to the latest manual, which is
one that is under development. Changing the links to
"yoctoproject.org/docs/latest" makes the tip of master, which
is used for devloping the next release, always have references
to the manuals being developed and not back to the stable
released set of manuals.
This "latest" and "current" scheme for the links is not perfect.
What has to happen when the latest set of the manuals freezes
and becomes the next stable release, all the links in the docs
will need to be changed from "latest" in the URL to the new
release number. So for example, all the "latest" occurences
would need to be changed to "1.2". Then for the next cycle
as development begins again, the links need to be infused with
"latest" again.
(From yocto-docs rev: a234aef34303b07671da956de0e94b352797143e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Michael Tomer from Koko Fitclub reported that the link to the
ADT Installer tarball was broken. Fixed the link.
As Reported by: Michael Tomer <michael.tomer@kokofitclub.com>
(From yocto-docs rev: 891fc3123f73a7b856207e0cdef32821f0cd90a3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Discovered a missing section for installation of the Eclipse Yocto Plug-in.
This information is critical to the release. Jessica discovered the problem.
New section added that describes how to install the plug-in as a standard
"New Software" installation from within the Eclipse IDE.
(From yocto-docs rev: d4976ec56d39813a72519387897023f65a5884f6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After greping through the documentation directory, I addressed
all the <ulink> statements that used to have yocto-1.0 in the URL.
They are now yocto-1.1.
(From yocto-docs rev: 97d160263c5905fdeaf4ec285bc5359918790581)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made several changes based on feedback from Jessica Zhang.
1. Removed "SDKVERSION" as a way of identifying the directory in
which a toolchain tarball is installed. I replaced with "1.1"
2. Cleaned up the bitbake command verbage to consistently use
'bitbake' command.
3. Cleaned up an erroneous reference to the toolchain environment
setup scripts. I was referring the user to the oe-init-build-env
area.
4. Changed wording to indicate that the toolchain tarball is generated
after running bitbake rather than installing the toolchain.
5. Replaced the gmae tarball file used in an example to be the
regular taball.
(From yocto-docs rev: f7c3e4f4a666121a29825099d451eab1accb0616)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark