Some SDK platforms have elfutils support, some do not, therefore allow
this to be configured.
(From OE-Core rev: 717e940d2c2beccfda31dda16a2d0d6d9a495042)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The include was useful historically, its not anymore so lets remove it.
This should have no functional change except on any layers directly depending
on it or gcc-cross.inc but even then it would only impact sh4 and is easily
fixed if there was a problem.
(From OE-Core rev: e7e8fe11c34bf05179f3bbaa2fb1af7b7125696a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I don't understand why we're building the target libgcc in the canadian-cross build
since it should have been built elsewhere. The compiler configuration isn't correct
to build a working target libgcc in all cases anyway.
To avoid various weird build errors, stop building it.
(From OE-Core rev: b0d1ab6242b6ce2bcdd0e4e3e61600344fcd2907)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On platforms like windows, executables have extensions. Whilst I'm not proposing
we wholesale support windows extensions, this small tweak allows a cross compiler
targetting mingw to be built which does seem like a good use case.
The patch therefore adds an EXEEXT which the mingw layer can set for the libexec
symlinks.
(From OE-Core rev: 8dcf0d95b654fa6cc56193168aaa744052ad8ffc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We already use relative links for other gcc libexec links, this changes the sdk
do_install to match elsewhere and use relative symlinks too. This makes things
slightly easier in the SDK installation process and standardises.
(From OE-Core rev: ecfa1141e731224cc5a099f8dfd22878f23359ec)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This disabling of PARALLEL_MAKE has been forward ported for gcc-cross-canadian
since at least 2009-09 and gcc 4.3.3, probably older.
I've tested this with high values of parallel make and it all seems to work and
we usually build gcc with parallel make so it seems unlikely there are issues.
Lets therefore enable it.
(From OE-Core rev: cee90d230899eb1255d586e6ee4fad0d94348cfd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This library is currently only available when targeting non-libc. This patch
also makes it available when targetting non-linux since it is likely of use
then.
It also adds a BBCLASSEXTEND for nativesdk since again, it can be useful
in that context.
(From OE-Core rev: af8c5adc71dc9bab57504d5a9dbf9e863fd4bf7b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gettext handling of USE_NLS has become a bit tricky to understand, or
alter from the SDK context. This patch introduces a SDKUSE_NLS which can
be set to configure a given SDK/ADT to use NLS or not. This is independent
of the target system NLS usage.
The code in gettext.bbclass is therefore simplified and the classes
themselves now set USE_NLS to appropriate values. No NLS is used
for native, cross and crosssdk since it is never used there and
would just increase build time.
(From OE-Core rev: fe634d47449899f7424adb77ff5bc7ddf8a07a47)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It can be useful to override or append options to the SDK tarball creation command
so add a variable to allow this.
(From OE-Core rev: ae86a46c1b255e7c2833eb6d48ed46eba440e95a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
${exec_prefix_nativesdk} doesn't exist so use prefix_nativesdk instead.
This resolves issues for code which attepts to use target_exec_prefix.
(From OE-Core rev: cd1ac8257ed2701cbe3802870183e8e1cd3b0418)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When copying the sources for the debug source package we use cpio -Ll
which means to copy files as hardlinks and to dereference symlinks.
It appears there is a bug in cpio since -Ll will copy symlinks and
not dereference them. We therefore do a second pass over copied symlinks
resolving them into files. Ideally we would copy these as hardlinks as well
however it doesn't seem worth the extra code and effort for what amounts
to a corner case for a minor space improvement.
This means that the -dbg packages no longer contain broken symlinks.
[YOCTO #5020]
(From OE-Core rev: 2ca2c4747f645a0d478c2171fff4c65752188285)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
configure just looks for xproto so we can drop the libx11 dependency and
reduce the amount we build for some small performance improvements and
less of the -native stack.
(From OE-Core rev: e473e60d5572f36829068f6d3db9ce9ba9633d71)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
eglibc 2.18 has now been branched out so point to new
tarballs
(From OE-Core rev: e0c2dd275827a4b37b8116d0f0119333638461af)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was passing "None" to bjam, which then parsed it as unknown build target.
(From OE-Core rev: 0a323abab1961caa334035f4f263f1787b3d7cc7)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When run 'bc -l', it segmentation faults. Apply patch from BLFS to fix it.
Ref:
http://www.mail-archive.com/blfs-support@linuxfromscratch.org/msg04601.html
(From OE-Core rev: ae3158e0cfbfa1f1027976bff34ad502eeb28583)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following tests hang on exit: direct_test, fusion_skirmish
(From OE-Core rev: 46b8009d668478c5ed3e8b64c65f1de2a4dc25b3)
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The additional Gallium drivers are needed for open source ATI Radeon
and NVIDIA graphics drivers.
The radeonsi and r600 drivers require LLVM 3.3 built with r600
PACKAGECONFIG so they must be explicitly enabled by adding r600 to the
mesa PACKAGECONFIG.
(From OE-Core rev: 1d08cef09cc7cbf682e8b372987fe4456961272b)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Register directories to be opened with PCManFM
filemanager using xdg-open in Build Appliance.
(From OE-Core rev: 06d1e6db91497ad86803f9a5ed2346cd23cfa744)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An extra --disable-orc was being added to EXTRA_OECONF regardless of
whether orc was in PACKAGECONFIG, drop this.
(From OE-Core rev: 0fbb6b6a2bae4d5df21dc9606e7befeb6ad24429)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patch needed only with automake-1.13 no longer worked as expected
after texinfo has been updated to version 5.1.
(From OE-Core rev: abda8c052e2c4098c828671c9dd46993c1e81de2)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport a Debian patch to fix the reading of the
gshadow file in order to make newgrp work correctly.
(From OE-Core rev: 3ef8db6217f7c40a9eb063d21ce6f25b16d88d53)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
[sgw - tweaked commit message]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This add support to list required/confliting distro features for a
recipe; this avoids user mistake when building recipes/images which
would not work depending on DISTRO_FEATURES option set.
Adding:
,----[ Use example ]
| inherit distro_features_check
|
| REQUIRED_DISTRO_FEATURES = "x11"
| CONFLICT_DISTRO_FEATURES_mx6 = "wayland"
`----
In the image recipe allow us to make clear to user that this image
needs X11 and /cannot/ be build with Wayland support in i.MX6
platforms, for example.
(From OE-Core rev: a7519be6a23869ebafbf712370dab86ab92f68a5)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This uses the new --add-exclude arguments in opkg-cl, to list the excluded
packages.
If an excluded package is needed for the install to resolve,
an error will be generated. Recommended packages will not
generate an error.
(From OE-Core rev: 6d7f5581bbfaf174edb77d92846e720e8057481c)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds a new argument to opkg-cl, --add-exclude, which is
used to add package names to the list of packages to exclude
from the install.
If an excluded package is needed for the install to resolve,
an error will be generated. Recommended packages will not
generate an error.
(From OE-Core rev: 63c61b7c0c8aeb89661e3bb85e281dd1ef5b618c)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new --no-install-recommends option is similar to the behavior of
apt-get's --no-install-recommedns. Only required packages will be
installed.
(From OE-Core rev: 86a30a88cf89ed97c372c391169f4ae243c89fd2)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for NO_RECOMMENDATIONS and PACKAGE_EXCLUDE. Also add a
warning that ensures users know that BAD_RECOMMENDATIONS support is
not implemented in the debian package/rootfs classes.
(From OE-Core rev: 42b115b6d65c8205acb77b96db481f3e5172266b)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previous debian APT configuration was using the sysroot directory.
This not only polluted the sysroot, but violates the expectation that
the sysroot is not modified by the rootfs installation.
(From OE-Core rev: 2db14eaa0fcc080bc20fa9da985ffc05c3b21e2a)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add NO_RECOMMENDATIONS support. A way to disable all recommended
packages from being installed. This will help shrink the size of
the resulting filesystem.
Add documentation on NO_RECOMMENDATIONS and BAD_RECOMMENDATIONS.
Note, using NO_RECOMMENDATIONS has side effects such that kernel-modules may
not have been installed. A user will need to manually add to their image
any kernel-modules required to be on the image for functionality.
(From OE-Core rev: 0341bfa886ea851f5a394051545b4e624d8003dd)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to attempt to reduce image sizes by skipping recommended packages,
a new mode was added to smart that only evaluates required packaged.
(From OE-Core rev: 6fd8141bbdcd84c591149d84ad84effc2357de72)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the new smart exclude mechanism an error will be generated in the
excluded package is required for the image to be generated.
(From OE-Core rev: 238c46c03d0d9c35523c78b94bfebb57904bac5a)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update smart to support a mechanism for excluding specific packages from the
install process. An error will be generated if this package is required.
(From OE-Core rev: 87660d636c2ebe76cd9dff2a334f135def9a0cf3)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the foundation for the PACKAGE_EXCLUDE support.
As part of this work, it was noticed that the PACKAGE_INSTALL and
PACKAGE_INSTALL_ATTEMPTONLY were still using he 'normal' version for
dependencies. This should no longer be necessary as of the change in the way
the complementary package groups (dev, dbg, ptest and others) are defined.
By making this change the dependency tree is more correct than before, and
gives the ability for manipulating PACKAGE_INSTALL and
PACKAGE_INSTALL_ATTEMPTONLY, while adjusting the dependencies at the same
time.
Warning messages will be generated if the user is trying to exclude a
package that was previously in the PACKAGE_INSTALL or
PACKAGE_INSTALL_ATTEMPTONLY variables.
(See additional commits for package manager specific support.)
Add documentation on PACKAGE_EXCLUDE and related variables.
(From OE-Core rev: 208d4d5ef7c5ead35dc27b7808f92ed377377aa4)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add -f to rm of ${D}${sysconfdir}/syslog-startup.conf.${BPN} so as to
not error out when the busybox config used does not have SYSLOG enabled
and DISTRO_FEATURES does not contain sysvinit.
(From OE-Core rev: 4c5756149754d0b18b14595db335f8f5e14cc0a3)
Signed-off-by: Florin Sarbu <florin.sarbu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 3.8 kernel has change the default directory where the dtb file is
stored. The change has been done at:
,----[ Quote of 3.8 kernel change ]
| commit 499cd8298628eeabf0eb5eb6525d4faa0eec80d8
| Author: Grant Likely <grant.likely@secretlab.ca>
| Date: Tue Nov 27 16:29:11 2012 -0700
|
| ARM: dt: change .dtb build rules to build in dts directory
|
| The current rules have the .dtb files build in a different directory
| from the .dts files. The only reason for this is that it was what
| PowerPC has done historically. This patch changes ARM to use the generic
| dtb rule which builds .dtb files in the same directory as the source .dts.
|
| Cc: Russell King <linux@arm.linux.org.uk>
| Cc: Arnd Bergmann <arnd@arndb.de>
| Acked-by: Olof Johansson <olof@lixom.net>
| Cc: linux-arm-kernel@lists.infradead.org
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| [swarren: added rm command for old stale .dtb files]
| Signed-off-by: Stephen Warren <swarren@nvidia.com>
| Signed-off-by: Rob Herring <rob.herring@calxeda.com>
`----
This change adds support for both places to backward and forward
compatibility.
(From OE-Core rev: 0ec3710b8dcae311e8d9d676d5f1c6843a81383b)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CQID: 430353
Define PACKAGECONFIG info for acl assuming it
might be a DISTRO_FEATURE.
(From OE-Core rev: a8455a13554088613d4576a74b19294a8b49ff88)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updates GPLv2 version of coreutils. They also want
patches for other packages that might use acl.
CQID: 430353
Add configuration data to enable acl support if
it is a distro feature.
(From OE-Core rev: 8030fdc198c1037ae458899eebd14a4fae04c49a)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
device_table.txt was once used by an init script named 'devices' to
create the basic files under /dev. However, it's no longer used now.
The devices init script has been removed, and makedevs command has been
disabled by default in busybox.
Besides, considering the device managers and devtmpfs filesystem, this
file is not likely to be used again. So we remove it.
(From OE-Core rev: cc3842255ade0ad6fb312f06f5e5e1edd9767c94)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, the boot partition was created for the target hard drive
but there was no corresponding entry for it in /etc/fstab. Besides,
even if the boot partition was mounted, it would just result in odd
directory hierarchy like /boot/boot/grub. However, what we really need
is /boot/grub. This patch fixes this problem.
Besides, for future maintance work, this patch also renames some of the
intermediate directories. It uses more descriptive names like /tgt_root
and /src_root. The name of /ssd is dropped.
[YOCTO #5018]
(From OE-Core rev: aa67b1333b4774e1845f562085f7048df65a644f)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, only unremovable hard drives are searched and are treated
as candidates of target disks to intall into.
However, it's possible that we're going to install the live image into
a removable media such as an USB. This patch enables this possibility.
In addition, this patch presents more information about the hard drives
so that user may have more knowledge about which hard drive they are
going to install their image into.
[YOCTO #5018]
(From OE-Core rev: 358f0584d779825307eec08c023b5ff14e72cf9e)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop patches merged upstream. 32bitBE-support.patch wasn't merged, but
no longer applies and similar changes look to have been made; tslib 1.1
works properly on qemumips without it, so this has also been dropped.
(From OE-Core rev: 2e92d845b433f3a1805c310ccda54cfc7dd8b1e1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When making distributions based on the default distro-less config, it
is useful to be able to reuse the default DISTRO_FEATURES options
without the need of duplication. The new variable,
DISTRO_FEATURES_DEFAULT, allow this reuse and customization.
So distros can include 'default-distrovars.inc' and use:
,----[ Use example ]
| DISTRO_FEATURES ?= "${DISTRO_FEATURES_DEFAULT} myfeature"
`----
(From OE-Core rev: 660ec04786162ff7f40aa78eb154dc4b5bf6ed9f)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The preinst scripts are calling bbnote, bbwarn and bbfatal functions,
but these functions are not written to the preinst scripts.
This patch writes these missing functions to the preinst scripts to
avoid the 'not found' errors.
(From OE-Core rev: ed45f00ef76d189611cda2cb922fa7eb8f86d9cc)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport the patch to fix the error when @enumerate is greater than 10:
mpatrol.texi:6356: bad argument to @enumerate
(From OE-Core rev: 9dca06b16fc10743ed879221fadb836733a9332c)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It brings fixes needed for python3 to work on uclibc/64bit targets
(From OE-Core rev: 01777e78639888d437b103ebafefccd932631bfd)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sync to latest cross-prelink, as of Aug 1, 2013.
Drop the PR number, no longer needed.
(From OE-Core rev: b59d256349cc0ac19357158be8e63bd52ab9fb51)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We use mac99 as platform for qemuppc
lets choose a tuning thats appropriate for it
(From OE-Core rev: 9b5572b8014f23747f18a7e0ca30c7094c524920)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is appropriate tune for mac99/g4 platform
that we use for emulating qemuppc
(From OE-Core rev: af10ecb57a5eb12c65975043d419f7506ef89b99)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of the qemuppc tuning activities, we are aligning on ppc74xx, and
as a result we can enable ALTIVEC support in the base BSP config.
[YOCTO #1914]
(From OE-Core rev: 81c5c93fb0589dc24c10a4d3722da72d4774db22)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta branch SRCREV to import the following config
changes:
f706bd4 drm-emgd.cfg: convert some config options from y to m
5995fa5 meta: features/power/intel.cfg
(From OE-Core rev: 1c9703c9e8b79f5c225c585c154416c1e7e6899f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were mangling names here to avoid characters that are invalid for dot
node names, but if you just quote all names that isn't necessary and we
retain the original naming, allowing easy searching of the graph files.
(From OE-Core rev: 99efdad886aa5063a68912846c00a46ba9b15536)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes it easier to obtain the difference from the last three
builds particularly where a single build might account for more than one
commit in the buildhistory git repository (e.g. if package and image
changes occurred).
(From OE-Core rev: 9512f3787295d662678c2943da31197c8df39e99)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Record the bitbake command line in the commit message as a further
context indication.
(From OE-Core rev: 34fb802b2170f0fe208e54e7a4d18f663db72f90)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* usually it's more important to know how much space will each
package take on target device then size of compressed package
* example for libewebkit0 with 4 different architectures, interesting
that om_gta02 .ipk is bigger but it's smaller when installed
before:
MACHINE DEFAULTTUNE SIZE (.ipk file)
om_gta04 cortexa8t-neon 15996 KiB libewebkit0
qemux86_64 x86-64 16992 KiB libewebkit0
spitz xscale 16148 KiB libewebkit0
om_gta02 arm920t 16260 KiB libewebkit0
after:
MACHINE DEFAULTTUNE SIZE (installed)
om_gta04 cortexa8t-neon 60544 KiB libewebkit0
qemux86_64 x86-64 63720 KiB libewebkit0
spitz xscale 60588 KiB libewebkit0
om_gta02 arm920t 56268 KiB libewebkit0
(From OE-Core rev: 85e4a77138381a6086d5ebd3a28cb5a94bc26a19)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since this variable is no longer used, we don't need to set a default
for it.
(From OE-Core rev: a5230835c539781b5b035dc6d0be3cac5a5bd305)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed a patch because the changes were merged upstream.
Also, the license had some modifications in two files.
(From OE-Core rev: 13ba4490f6422109f934ed36809bd52d44577574)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This new version of texinfo uses perl for the conversion process.
The perl modules are installed in ${datadir}/texinfo which was getting
pulled into the -doc package, since FILE_${PN} is a full override, add
it back.
(From OE-Core rev: f0b6734182a5505fad7d26bc67a2141e51bc7a9d)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the rootfs is read-only and the ssh keys are not available at system
start-up, the init script will generate ssh keys into /etc/ssh, thus
causing a 'read-only file system' error.
In order for Yocto based image to work correctly for read-only rootfs,
we use the following logic for openssh.
If the rootfs is read-only and there are pre-generated keys under /etc/ssh,
we use the pre-generated keys. Note the pre-generated keys are mainly for
debugging or development purpose.
If the rootfs is read-only and there are no pre-generated keys under
/etc/ssh, we use /var/run/ssh as the location for ssh keys. That is, at
system boot-up, the generated ssh keys will put into /var/run/ssh.
[YOCTO #4887]
(From OE-Core rev: 2ed44745024f04aa4e00ddba3009153c6b47c8e9)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The init script for irda writes configuration items to /etc/sysconfig/irda
if that file is not available in system. But it's actually not necessary,
the behavior doesn't change whether the init script writes to the file or not.
Considering it issues error messages in case of a read-only rootfs, I delete
the writing process.
[YOCTO #4103]
[YOCTO #4886]
(From OE-Core rev: f88a101bc0caa7b486527f0d337406651cbaeb0d)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, dead links in target directory will not be copied.
This is incorrect as dead links are not uncommon in our rootfs.
So we use '-a' option instead.
(From OE-Core rev: 742440441222e0627abbdd3eb2ee16401e8f4adf)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we're building a read-only rootfs, we'll get the following error now
and then.
tar: .: file changed as we read it
The root cause is that we spawn background process at rootfs time.
When the tar command is running, it's possible that files under rootfs
are changed by background processes, thus this error.
[YOCTO #4937]
(From OE-Core rev: 4bd419f95868d5b8707a45cee5f6c5c6a840a65b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's possible that a 'No such directory' error occurs when doing
check_requirement in populate-volatile.sh at rootfs time. This is
because the $ROOT_DIR/var/tmp might be a dead link.
Use $ROOT_DIR/var/volatile/tmp as the TMPDIR instead to avoid this
error.
[YOCTO #4883]
[YOCTO #4103]
(From OE-Core rev: 7c2c36a97bab46c73a3a1fb743ad3ec67a4c072e)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At some point, the udev was modified to source the functions from
initscripts or lsbinitscripts. This dependency is actually not needed.
If we use udev in a system where initscripts from oe-core is not available,
there will be errors.
This patch fixes this problem by removing the implicit dependency.
[YOCTO #4882]
[YOCTO #4103]
(From OE-Core rev: 72d6825c24f4c3e4a7a907cf0a09e2e8f7720ae8)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the live image is mounted as read-only, we cannot make necessary
directories under $ROOT_MOUNT/media, so trying to move the mount points
lead to errors.
So in case that no unification filesystem mechanism is available in kernel
and the rootfs is mounted as read-only, we mount tmpfs on $ROOT_MOUNT/media
so that it's possible to make necessary directories under it.
[YOCTO #4881]
[YOCTO #4103]
(From OE-Core rev: aeeb3418ff08dfd29edc0ce8a41cb6887d4e11fe)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of hard coding the uid/gid, we prefer the way of using user/group
names.
Note the way of using uid/gid is still supported.
[YOCTO #1159]
(From OE-Core rev: c5ef0294a9b8d178896a47c9f5d6e3dd6797e343)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that the makedevs supports using user/group names in the devcie
table files, and it uses passwd and group files under the rootfs which
is provided by the base-passwd package, we should let package installation
finish first, so that makedevs can get a correct mapping from user/group
names to uid/gid.
The check for existence of ${IMAGE_ROOTFS}/dev is removed. This is because
do_rootfs doesn't have 'nostamp' flag any more, so the do_rootfs task will
not be rerun for every build. Checking for the existence of ${IMAGE_ROOTFS}/dev
is not necessary any more. Besides, as base-files package also installs the
/dev directory, this checking does not serve as a good criteria.
[YOCTO #1159]
(From OE-Core rev: d073ca77ba886c7912abd3ec0640881c00aea3bb)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Compared to hard coding the numeric group and user ids in the device
table files, the way of using user/group names is preferred.
This patch adds the ability to makedevs to correctly deal with device
table files with user/group names in them.
To maintain backward compatibility, the way of using uid/gid is still
supported.
[YOCTO #1159]
(From OE-Core rev: 1fcf718e3a1e50446ab61972069566e5016bc625)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Xlib has a historical quirk where 32-bit values are returned in longs (but
always hidden through a cast). On 32-bit machines this doesn't matter but on
64-bit this leads to problems. Bump SRCREV to integrate a fix from upstream.
Also, drop the conditional configure_fix.patch, it was integrated long ago.
[ YOCTO #4917 ]
(From OE-Core rev: 09c609afbfb6e9a2504166d0fe8c7ae3d8ae9ebd)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove check.m4 as libmatchbox uses the check.pc instead of a m4 file now.
(From OE-Core rev: 4f51bf23346947cd47e7ac9e1290e799f3c20708)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* configure fails without it
at-spi2-core/2.8.0-r0/temp/run.do_configure.372: intltoolize: not found
(From OE-Core rev: 483abbe91c1320d6c6e3e7a5824de80e427aa50e)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As per OE-Core convention, indentation should be TAB for shell.
(From OE-Core rev: 91b6d2cf08c5c6ad58f0f9a85a3536a9034342b8)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As per OE-Core convention, indentation should be TAB for shell.
(From OE-Core rev: a92376f2daf10baf45d99a3de9502b52cbce8b7e)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As per OE-Core convention, indentation should be TAB for shell.
(From OE-Core rev: d73a0d00554cc197d2eb7e95432252af267d7bca)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the current implementation of postinst logging mechanism, the
location for log file is configured via the POSTINST_LOGFILE variable.
The POSTLOG variable is obsolete now, thus removing it.
(From OE-Core rev: 6aaf2d5c51eb4ee6acbb85fd4aa5f44406907bc2)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Separate GL and GLX flags don't make sense, as on Linux GL means GLX and GLX
means GL.
So, default to GLESv2 and GLX if X11 is enabled. EGL on X11 doesn't have
feature parity yet so leave it disabled by default.
(From OE-Core rev: e5f8f6c6191505d731c4672353e811d6729d424a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As the Linux kernel, unconditionally, builds the dtc application and
it is the compatible version with the DeviceTree files shipped within
the kernel it is better to use it and the kernel build system to
generate the dtb files.
Some DeviceTree files rely on CPP and kernel headers to be able to
generate the dtb binary contents and it is harder to replicate it
outside of Linux kernel build system so we /use/ it.
To comply with these assumptions we need to use the dtb file when
calling 'make' instead of pointing to the DeviceTree source file; the
code has been made backward compatible but it is advised to move to
the new definition to avoid warnings as:
,----[ Original definition ]
| KERNEL_DEVICETREE = "${S}/arch/arm/boot/dts/imx6q-sabresd.dts"
`----
Becomes:
,----[ New definition ]
| KERNEL_DEVICETREE = "imx6q-sabresd.dtb"
`----
(From OE-Core rev: 72980d5bb465f0640ed451d1ebb9c5d2a210ad0c)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should not skip it always since same recipes provide
qemu-native too so user class-target override to make it
only skip for target recipes
(From OE-Core rev: 23d633cc65cf31486263f120c71df82186cfdd22)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Build dpkg-native on Fedora 19, it fails with:
/usr/include/c++/4.8.1/cstdlib: In function ‘long long int std::abs(long long int)’:
/usr/include/c++/4.8.1/cstdlib:174:20: error: declaration of C function ‘long long int std::abs(long long int)’ conflicts with
abs(long long __x) { return __builtin_llabs (__x); }
^
/usr/include/c++/4.8.1/cstdlib:166:3: error: previous declaration ‘long int std::abs(long int)’ here
abs(long __i) { return __builtin_labs(__i); }
^
That because header cstdlib is included in a 'extern "C"' block that gcc
4.8 doesn't support. Fix it by move the header file out of the 'extern "C"'
block.
(From OE-Core rev: 7de61ecc3efc43c625dde9a66f5c05e980a82e34)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
base.bbclass had code which handled the PNBLACKLIST in case of
multilib use. This is better to be done in the blacklist.bbclass so it
has all logic in a single place.
(From OE-Core rev: 04f0fefeccc1e7e3af8a1f741350492ae3f171fc)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
opkg is GPLv2+ licensed but it has optional support for sha256 checksums which
was GPLv3+ licensed. This code is not built unless '--enable-sha256' is passed
to the configure script, the default is equivalent to '--disable-sha256'.
However, the header 'sha256.h', which is GPLv3+ licensed, is in the list of
header files to be installed and thus could end up in the libopkg-dev package.
As this header is installed to '/usr/include/libopkg' it is very unlikely that
it will ever be used. However, if you're uncomfortable with GPLv3 code going
anywhere near your target filesystem you won't want this to happen.
The simplest solution is to replace the sha256 implementation in opkg with the
implementation from coreutils-6.9 which is licensed under GPLv2+. This is
committed to the opkg subversion repository as r652/r653.
The only intervening commit between r650 (previous SRCREV) and this is r651,
which integrates 'obsolete_automake_macros.patch' into the opkg sources. Thus
this patch isn't needed in oe-core anymore.
(Note: Before 873689bbabba25e7be5c12317c04519a7bc8d0ef, this header is only
installed if opkg is built in its source tree (ie. ${B}=${S}). After that commit
the header will always be installed)
(From OE-Core rev: 3c6a8a39d820f14f9eb3df3d719cef2c469769da)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4991]
The kernel image is installed as part of the kernel-image package, but
the symlink creation/removal via alternatives is being done in
pkg_post(inst|rm)_kernel-base.
Move the postinst alternatives logic into the kernel-image functions.
(From OE-Core rev: 35f538b117e3387354d2dab1f22c3de28ab1322b)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Apparrently a LICENSE change was missed, so we add the GPLv2 version back in
(From OE-Core rev: 002818712fab5c6325b1f7205512945ea87ad76c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #4993]
Move the runtime_mapping_rename into a prefunc for the do_rootfs function.
Otherwise doing it in the python section could occur BEFORE the multilib
classes renaming.
If the package 'b' is a kernel module, then lib32-b and b should both
point to the same package. The runtime_mapping code will do this
automatically.
Before if you ran: bitbake lib32-<image>
It may do:
start PACKAGE_INSTALL (a b c)
remap (a b c)
MULTILIB naming (lib32-a lib32-b lib32-c)
What we want is:
start PACKAGE_INSTALL (a b c)
MULTILIB naming (lib32-a lib32-b lib32-c)
remap (lib32-a b lib32-c)
(From OE-Core rev: 836662c9a9c175521dbcd29cdfc0a7c144d8770f)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some LSB packages appear to have the platform set to '%{_target_platform}'
which is not a valid platform field. This causes a failure of the type:
warning: package lsb-test-core-4.1.15-1.x86_64 is intended for a %{_target_platform} platform
When we detect an invalid platform, fall back and try to construct a new
platform name that may be valid based on the arch and os contents of the
package. (This should only ever be needed by invalid or older RPM packages.)
(From OE-Core rev: 6513fa327aeb7e9fdd313290c205917952eed226)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change the #define references to match RPM_VENDOR_OE.
(From OE-Core rev: a84ecc5ad158a7529a904785de25ebfedf5767a7)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Devicetree files were installed hard-coded in /boot. When KERNEL_IMAGEDEST
is anything else but "boot", the postinstall script and the file locations
no longer match and the postinstall will fail.
Replace "boot" with "${KERNEL_IMAGEDEST}" to fix this problem, and to allow
the devicetree files to be installed in another location.
(From OE-Core rev: 0f589b9a38397fdf55025062a45889b19d1c83c4)
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The grub_fix_for_automake-1.12.patch replaced pkglib with pkgdata to
make grub_0.97 build with automake-1.12. However, it forgot to set up
the pkgdatadir, thus causing grub_0.97 not shipping files under /usr/lib.
This in turn resulted in an unworkable grub.
This patch fixes this problem by setting up the pkgdatadir correctly.
[YOCTO #4997]
(From OE-Core rev: 883b1b396328e6cd67dcb4ca6fd8975b6e716c0a)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New systemd runtime tests for enable/disable service, start/stop service and list services.
(From OE-Core rev: 6386dc718f85210c9b6b9f69878ec9a7847b78de)
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add separate tests for restarting syslog and using logger, and
skip the configuration test for systemd images which always fail
because syslog's systemd service doesn't read a config by default
(see YB#4860).
(From OE-Core rev: c75f3e2385dde44ee96e33f4e5d064894dfb7d52)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The way we read data from the serial console was unreliable and blocking (AutoBuilder
seems to hit that often), so change the serial console type from unix socket to tcp
and reverse the connection - don't let qemu act as server (wait for a connection).
So now the serial console is used to save the boot log and make sure that we reached
the login prompt. Until a better way is found this should solve some of the AutoBuilder
failures (one being YB#4904).
Also we need to use the same method as the old qemuimagetest to get the ip
(from the qemu process arguments), because that it's more reliable.
The first version used here was to log into the target and use the output of
"ip addr show eth0" but then systemd decides that it should rename interfaces,
so that was changed to get the ip of the interface that has the default gw,
but if there is no default gw we'll get the loopback ip and we end up trying to
ssh into the host machine (some recent AutoBuilder runs showed that).
Changed in V2:
- use -ww for ps, as output might get truncated
(From OE-Core rev: 55e78185110937b7e2b143cf1020426d8df58b72)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The full name for the log is confusing when there are multiple files.
Also move the ssh log path stuff where it's needed.
(From OE-Core rev: 1dbef61a0776ec6c9ac9209442bb4c346e706d7d)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
One patch (submitted upstream) for when Gallium is enabled, and another
(inappropriate for upstream) to fix out-of-tree builds with
0003-EGL-Mutate-NativeDisplayType-depending-on-config.
(From OE-Core rev: fbc7092f0ae07538d4363679b1597ba4e556d1a8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We only have a short description, so set SUMMARY and DESCRIPTION will be
defaulted from it.
(From OE-Core rev: 33fc0caa169c8d0c707977e387bda6a23630ee12)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A recipe is now available for this, and it should enhance performance on
x86/x86-64.
(From OE-Core rev: 39aab68c1d60cb071bbd0c5d21b94222c89209a3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Enable external libav for better optimisations/additional bugfixes
(internal ffmpeg copy is quite old), default enabled but can be
disabled using PACKAGECONFIG
* Add a PACKAGECONFIG for orc, disabled by default in line with other
gstreamer recipes
* Bump PR to r7 so the bbappend can be dropped without PR going
backwards
(From OE-Core rev: aab668fbba25d3e590e4182224b7b064d7705c5b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes from the meta-oe recipe:
* Update stable recipe to 0.8.8
* Update git recipe to the tag for 9.8 (for now)
* Switch over to a tarball for the release version recipe
* Add LICENSE_FLAGS = "commercial"
* Set SUMMARY instead of DESCRIPTION
* Add yasm-native to DEPENDS since there is now a recipe for it
* Remove libvpx from DEPENDS and add a PACKAGECONFIG option for it,
disabled by default since it wasn't actually being enabled
* Add a PACKAGECONFIG option for x11 to enable/disable x11grab, and
add the proper DEPENDS if so (still defaults to enabled)
* Add a number of other PACKAGECONFIG options, replacing some old
comments as well as offering the ability to disable x264.
* Hide text relocation warning when building for i586 (PIC can't be
enabled for 32-bit x86).
* Drop PR
Notes for the git recipe:
* This hasn't been able to be built recently in meta-oe since there was
a circular dependency between libav and libpostproc. libpostproc is
part of libav 0.8.x but was split out in 9+ and is not needed at all
anymore by libav itself, so this dependency was removed.
* Additionally the recipe was filtering out the option to enable
libpostproc but this option wasn't being added by the inc file and
thus the filter wasn't doing anything, so I dropped this as well.
(From OE-Core rev: 9a670f780b1f1204d426017ff9a95842ad85800e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is required by the default configuration of libav being brought over
from meta-oe. Changes from the meta-oe recipe:
* Update to the latest revision from the stable branch (upstream does
not seem to provide stable releases.)
* Add LICENSE_FLAGS = "commercial"
* Enable PIC to fix text relocation warnings and disable warning for
i586 (since PIC can't be used there)
* Make SUMMARY value slightly shorter
* Indent SRC_URI consistently with other recipes in OE-Core
(From OE-Core rev: a3ca077285003fbc04d134e875a58a745271e47f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed for x264. Enabling it for libav also improves performance
on x86 and x86-64. Two minor changes from the meta-oe recipe:
* Set SUMMARY instead of DESCRIPTION
* Drop setting of S - it was setting it to the same as the default
(From OE-Core rev: 2619c81d6641ef5d4dee58c128a1af140429c248)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, fsck is always disabled because the value of rootcheck in
the checkroot.sh script is always set to 'no'.
We should respect the value of ENABLE_ROOTFS_FSCK in /etc/default/rcS
to allow for filesystem check.
(From OE-Core rev: 5c11cf4db8f43003fb7132b92a78659f70f07ce0)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LIC_FILES_CHKSUM changed because some lines were
in addition in main.c file. Those lines are related to exit
status.
(From OE-Core rev: bbd59e73f576a7e89bea6480c81116cee7d8d2e8)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On host system where dyninst installed (i.e Fedora 18 with SystemTap)
builds fails with the error from do_qa_configure "This autoconf log
indicates errors, it looked at host include and/or library paths
while determining system capabilities." Problematic config.log
indicates inclusion of /usr/include/dyninst/dyntypes.h
Fix for now - disable dyninst in oe builds
(From OE-Core rev: c4d4fb198d56b26661cc2f98ade6a57f60d9c514)
Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sysvinit and systemd have different ideas about configuration files (or
environment files in systemd), so basically we can't use the same one in
both cases.
To avoid confusion, this patch removes syslog-startup.conf if 'sysvinit'
is not in DISTRO_FEATURES.
[YOCTO #4837]
[YOCTO #4860]
(From OE-Core rev: 89f62147a61108b4be40001e1fbe3be33bacf00b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE carries a patch to pass CFLAGS to qemu. However, we can avoid
patching by passing CFLAGS with qemu's --extra-cflags option.
Tested that building qemu-native still works without zlib-dev
on host, and that qemu builds.
(From OE-Core rev: 67b6d8d9f987a59090a9a8af61cf740207703dff)
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a comment explaining the libproxy failure, and note that wpa-supplicant doesn't support B!=S.
(From OE-Core rev: ba9b3465bcd639a78328e9d2540c14cddf53cae5)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BUILD_CC is assigned to CC when do compile. If BUILD_CC has multi-items
such as "ccache gcc", compilation fails with:
make: *** No rule to make target `gcc'. Stop.
Double quote BUILD_CC to avoid this error.
(From OE-Core rev: 4f1fcdbea1629ebf506fb0dbd5df71a588f0372b)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bash: reference acl*.m4 from ${S}.
The build directory had been moved to ${WORKDIR}/build,
so we should reference acl*.m4 from ${S}.
Otherwise, the following configure error will be caught.
| cat: aclocal.m4: No such file or directory
| ERROR: Function failed: do_configure (log file is located at ...)
(From OE-Core rev: b296e7412a45f0c07b4f843784211ef0f66221e6)
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Multiple do_fetch[prefunc] can happen at the same time and
if not os.path.exists(pkghistdir):
os.makedirs(pkghistdir)
isn't safe
* Use bb.utils.mkdirhier which doesn't raise error when directory exists
(From OE-Core rev: 9aac194d7db79129dcbed29cfb89c57dccf33729)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* this way it's easier for distro to select if such issue should be
error, warning or ignored and also it gets recorded in qa.log
(From OE-Core rev: 44624853de8c88abdcae2ccd0902b390ff546d4c)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The neon update is not recognized but subversion, so we need to patch the configure.ac
to know about 0.30, otherwise we don't have http/https support in subversion.
(From OE-Core rev: 291ab168fac15eae0e4c9234e16f394b0e1547a0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie
Saul Wold
Kai Kang
Khem Raj
Marko Lindqvist
Yevhen Kyriukha
Lauren Post
Jonathan Liu
Cristian Iorga
Paul Eggleton
Roy.Li
Otavio Salvador
Mark Hatle
Florin Sarbu
Chunrong Guo
Joe Slater
Chen Qi
Jackie Huang
Bruce Ashfield
Martin Jansa
Cristiana Voicu
Stefan Herbrechtsmeier
Ross Burton
Muhammad Shakeel
Jukka Rissanen
Paul Barker
Darren Hart
Mike Looijmans
Alexandru Palalau
Stefan Stanacar
Victor Kamensky
Riku Voipio
Bian Naimeng
Javier Viguera