Clean-up to avoid duplication and promote code reuse to factor
taskdata creation into a common function.
[RP: minor tweaks]
(Bitbake rev: 468c221449290c4f196e87f7d8e23fcd7db86135)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding a runQueueTaskSkipped to notify that the tasks that are not
run either because they are set-scened or they don't need an update
(timestamp was ok).
(Bitbake rev: cf4a0c7aa82090876ae652b611acfab3ce2688f7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add the path to the logfile for all Task events except TaskInvalid
so that we can trace back the logfile locations at some future point.
TaskInvalid doesn't ever have a logfile.
(Bitbake rev: 8344d84c609446f59f9619cc7ca0d693b7e2bbd6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.10 meta branch to import the following commits from Darren
Hart:
285f93b meta/common-pc-64: Add USB 3.0 support
75072e4 meta/common-pc*: Refactor common-pc-64 to reuse common-pc drivers
da06bde meta/common-pc: Split out CPU and Drivers config fragments
5f55e40 meta/common-pc: Cleanup common-pc.cfg and common-pc-gfx.cfg
0a3f784 meta/common-pc: Add common Wifi drivers
f4b9f5e meta/common-pc: Add common Realtek and Atheros Ethernet drivers
4d9d3eb meta/common-pc: Build Ethernet and Wifi drivers as modules
13141ee meta/common-pc: Refactor Ethernet and Wifi options
These are in support of a new genericx86 multi-target BSP.
(From OE-Core rev: 1ab0813c819d3b785178faa458486efa6992c636)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'need' and 'provide' files are there for simpleinit compatability,
according to the comments in these two files.
However, we don't use simpleinit and there's even no simpleinit recipe
in OE. Besides, these two files are not installed.
This patch removes these two unused files.
(From OE-Core rev: 05ac5627208c98007cd4c7aed9d76f179cd974a9)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix indentation in SRC_URI to conform to the indentation convention in OE.
(From OE-Core rev: e05e7016fac7c665a23865dce18b816e01dbd51e)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Condition building PCBIOS legacy images on MACHINE_FEATURES containing "pcbios"
or not containing "efi". This ensures existing BSPs will continue to get the
old PCBIOS legacy-only images. New BSPs can add "efi", "pcbios", or both. The
images created likewise support one or the other or both.
(From OE-Core rev: c58aceee7dc243467dd87f07ccc61859f8d945e6)
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch redhat-portability.diff causes this issue
so lets revert the portion which was using %a instead of %m
thats recommended anyway, redhat patch seems to be targetting
old compilers.
(From OE-Core rev: c1cbc57eb80d2cab9a80d5e5aa65419f40eefb15)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should fix the case where neon code is emitted for machines
which dont have neon unit in the chip
[YOCTO# 5161]
(From OE-Core rev: 516e6f065a1bed0d95ffd1c8a4d8e135d834af94)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Our Mesa doesn't yet ship the XA Gallium state tracker that the VMWGFX
sub-driver needs, so just disable vmwgfx.
Also remove a spurious xvmc dependency.
(From OE-Core rev: a6f84a0317997c3f49e136381f8d2f2f5cadd292)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
using update-alternatives to link runlevel from systemctl, as on Fedora 18
(From OE-Core rev: 8909b3b71b2ac792ae092b8f0a6c2ade28f6b73b)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The install_initd and remove_initd are linked to /sbin/chkconfig for lsb
core test, but chkconfig has been moved from /sbin to /usr/sbin in order
to fix QA warning about unsafe references in binaries.
(In commit e486242db8)
Let install_initd and remove_initd link to /usr/sbin/chkconfig could fix
this issue.
[YOCTO #5152]
(From OE-Core rev: 789c4c13c5095a2865d1ee1b242141b5b076bed5)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is from the Anjuta integration which was removed many years ago.
(From OE-Core rev: db488bf8130dba2ad8771b0634e3c5de452f23f2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I mistakenly named the allarch opkg repo the same as nativesdk one...
This patch fixes it.
[YOCTO #5181]
(From OE-Core rev: 98f39b0ae4ed45194a165de3913f27745481cb7a)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I'm getting concerned with the number of people forking this recipe
and not understanding what they're doing. I'm therefore proposing
adding in a suitable warning to people thinking of copying it.
(From OE-Core rev: c27ac156bcaf3193d52f456480947b0cfaef3c72)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Increase the timeout for smart commands as under load for qemumips
it's still to small. Also give ping more time fixing a potential
timeout for sato systemd.
(From OE-Core rev: daa3ad5807f6fc0d15b9310937d07a16edac6d22)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we have a hierarchy of pkgdata directories and the code has to put together
a search path and look through each in turn until it finds the data it needs.
This has lead to a number of hardcoded paths and file globing which
is unpredictable and undesirable. Worse, certain tricks that should be
easy like a GL specific package architecture become problematic with the
curretn search paths.
With the modern sstate code, we can do better and construct a single pkgdata
directory for each machine in just the same way as we do for the sysroot. This
is already tried and well tested. With such a single directory, all the code that
iterated through multiple pkgdata directories and simply be removed and give
a significant simplification of the code. Even existing build directories adapt
to the change well since the package contents doesn't change, just the location
they're installed to and the stamp for them.
The only complication is the we need a different shlibs directory for each
multilib. These are only used by package.bbclass and the simple fix is to
add MLPREFIX to the shlib directory name. This means the multilib packages will
repackage and the sstate checksum will change but an existing build directory
will adapt to the changes safely.
It is close to release however I believe the benefits this patch give us
are worth consideration for inclusion and give us more options for dealing
with problems like the GL one. It also sets the ground work well for
shlibs improvements in 1.6.
(From OE-Core rev: 1b8e4abd2d9c0901d38d89d0f944fe1ffd019379)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Increase the version to signify the layout change of the images
in the deploy directory.
(From OE-Core rev: 4246e7dd59800a1d6c6d02c00f4e86eeac020767)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows a clean seperation between image outputs from different
machines, and makes it possible to have convenience symlinks to make
the output ready to deploy.
This did require some surgery in runqemu; if explicit paths to the image
and kernel are not supplied then DEPLOY_DIR_IMAGE needs to be determined
from bitbake or set in the environment. However the script does try to
avoid requiring it unless it really is needed. Corresponding changes
were made in the automated testing code as well.
Based on an RFC patch by Koen Kooi <koen@dominion.thruhere.net>
(From OE-Core rev: 7e90261aec61f79680b5eaeaf5b18c7b795412a4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a "Segmentation fault" error when build icu-native when the
TMPDIR is in a deep directory (for example, when len(readlink -f $TMPDIR
== 410)), use LARGE_BUFFER_MAX_SIZE for cmd rather than
SMALL_BUFFER_MAX_SIZE would fix the problem, this should be a misplay
because other cmd uses LARGE_BUFFER_MAX_SIZE.
[YOCTO #5171]
(From OE-Core rev: ebfdddc23ff78231a819c62c8ffcced9633aa08b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In perf.bb:
S = "${STAGING_KERNEL_DIR}"
So the source should be ready after the do_unpack, and we need this:
do_unpack[depends] += "virtual/kernel:do_populate_sysroot"
Otherwise, maybe no source after do_unpack.
[YOCTO #5168]
(From OE-Core rev: 01d3b15518b981199120b3b9c6923678244aefdc)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If not every combination of BB_NUMBER_THREADS and PARALLEL_MAKE have
been tested by bb-matrix.sh, e.g., by using BB_RANGE="04 08 10 12 16"
and PM_RANGE="04 08 10 12 16", then the graph that gnuplot generates by
default looks very jagged due to the missing data points. By using
splines to interpolate the missing data the graph looks a lot better.
This should not change graphs where all data points are available in any
way, only improve sparse graphs.
(From OE-Core rev: 9642c1314da64c70254f6b012aa73ef37bbaa33f)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For a long time we've provided PN-PV and PN-PV-PR by tweaking PROVIDES. This looks
nice at first glance however it turns out to be a bit problematic. Taking make as an
example where there are two versions, 3.81 and 3.82, what should "bitbake make-3.81" do?
Currently it builds make-3.81 and make-3.82 and breaks in interesting ways. Is that
a bitbake bug? Well, it certainly shouldn't try and run the build. Why is it building
3.82 though? Its due to finding a dependency on "make-dev" and then trying to figure
out what provides it? The answer is "make" and the default version of "make" is 3.82.
So arguably, finding "make-3.81" should infer PREFERRED_VERSION_make = "3.81". Doing
so resolved the above problem since now "make" resolves to "make-3.81".
So what about if we have Recipe A:
DEPENDS = "make-3.81"
and Recipe B:
DEPENDS = "make-3.82"
That is clearly an error, easy. So finally what about if we have Recipe A:
DEPENDS = "make-3.81"
and Recipe B:
DEPENDS = "make"
The first recipe infers the PREFERRED_VERSION_make = "3.81" and then forces that
version on everything else. Is that desired? Probably not in most cases, at least not
silently.
As mitigation, we could print a WARNING about this happening. The final part of the problem
is that we can ony figure this out within bitbake itself. That means we'd have to teach bitbake
about the PN-PV format of PROVIDES which is breaking the separation between bitbake and the
metadata. We can't win :(.
Nobody that I know of is using or relying on this functionality so perhaps we should
just remove it instead which is what this patch does. Opinions?
(From OE-Core rev: a87c205bb6cefd5e1a41b8e7ef02b5bfa380e3b6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes sure the the first build starts from a clean state. Otherwise
one could have the first build affected by any leftover state from
a previous build.
This also leaves a working state behind after the final build.
(From OE-Core rev: f8f86ac88aa1bba99ba28762cfbd97d3721da7d9)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sstate_package creates hardlink from sysroot to SSTATE_BUILDDIR, then
sstate_create_package will store SSTATE_BUILDDIR into a archive file by
tar, but once other packages install the same file into sysroot, the
creating the archive file will fail with below error:
DEBUG: Executing shell function sstate_create_package
tar: x86_64-linux/usr/share/aclocal/xorg-macros.m4: file changed as we read it
This kind of error is harmless, use --ignore-failed-read to ignore it.
The error in tar occurs when the timestamp of the file changes and this
can happen when the number of symlinks change. The file will be included
in the archive.
[YOCTO #5122]
(From OE-Core rev: 4b3e353a532c7b68b0bb86df4a2fcc44f8bb3ef2)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Exiting from the server is antisocial, instead we should raise an exception. This
will correctly fail the current command and reset the server state. We use
the handled exception since for these conditions to occur, something was
already displayed to the user.
(Bitbake rev: dacc94bcace85a2e95aee2dccd8e680c59e4545f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Only display a CommandFailed ERROR: message if there is an error to display.
Only display an errors summary if we actually displayed errors.
(Bitbake rev: 568ea00acd226d48e725bb01d4f8c410ed1eaa61)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Empty messages should trigger CommandFailed, not CommandCompleted as
otherwise the exit code will be incorrect.
(Bitbake rev: 70a8ead31f9ffc987d9c6db61a926f7a9af8f8b1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After running a command on the server, it needs to reset to the initial
state. This ensures that subsequent clients start from a known state
and notice any configuration changes.
Ultimately we may want to do more than this buts a good start and better
than nothing.
(Bitbake rev: dd15648fc2654b8d7c3e00ea7ab3dbf04f24f24b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The shutdown state causes the server to finish what its doing, stop was
them meant to completely stop it. It doesn't mean the server is stopped
though. Renaming the current stop event for forceshutdown gives more
meaning to what it actually does. The stopped namespace then becomes
available to indicate a completely stopped server.
(Bitbake rev: 12e9d33bfae5294e3870dfd1202f63383ad05e92)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the cooker event data isn't rebuilt upon reset and the cache
configuration cannot be changed after init. These are both bad things
and this patch refactors the init/reset code so that it is possible
to reconfigure the server.
(Bitbake rev: 1193b8d76fcb6cb87e9ec135a2514370d7dd90ac)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This call only ever happens in cooker context now so we can drop the
nasty worker check from here.
(Bitbake rev: bc0b30199a8e3624c5b9914430adbcc7c6bd4497)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BitBakeUIEventServer is an unused class that pushes UI
events over a separate thread.
The current version of XMLRPC server works just fine with
the classic UI event handlers, so this class is not needed.
(Bitbake rev: 8e8e17631d790271b1be747c4b45059ec38ab606)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake wasn't reparsing when _remove items were added to its configuration
and equally, appends/prepends were also being badly tracked. This
change enrures these variables are accounted for in the configuration
hash.
[YOCTO #5172]
(Bitbake rev: 62914f9208ef2427a34daa523af857f4027900eb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4980]
Added a new glossary entry for OEROOT.
Added significant information to the local.conf and bblayers.conf
reference sections to describe how the root build directory is
derived.
Also, some unrelated formatting to the DL_DIR variable description
was mixed in here because I forgot to commit that separatey and it
lives in the same variables.xml file.
(From yocto-docs rev: c397a31f5b0d3f6257657119a4e81b4fbdc3800c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2808]
I tweaked the SCM box in the figure so that the connection to
real SCMs is better. This was causing confusion.
(From yocto-docs rev: f4080315ab6b57068ab2fbb948c52f731d1ea5dd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The variable ##COREBASE## has been deprecated, so use
##OEROOT## instead.
(From yocto-docs rev: 4520a2e41bf229481bd959e494e5bde84bbcfc51)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the manuals to reflect the recent replacement of atom-pc with
genericx86.
(From yocto-docs rev: 8f77006d74b77000f56b64581cb5f6474f53a4f1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some things were not in alphabetical order.
(From yocto-docs rev: e7d96d5eecaa74d680a4495a21f86a7776852c48)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4079]
The changes here address the documentation component of this
bug. There is now a new section in the dev-manual in the
"Working With Packages" section that describes and introduces
the three variables the user can use to control this feature:
BAD_RECOMMENDATIONS, NO_RECOMMENDATIONS, and PACKAGE_EXCLUDE.
(From yocto-docs rev: a7e2097c43955db99ec068068d4291fc4e1deaf8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The main changes are captured in a new section devoted to the
oe-init-build-env-memres script within the ref-structure.xml
file and in the variables.xml file in a BBSERVER variable entry
in the glossary.
All other changes were necessary to integrate the new functionality
into areas where running the setup script are discussed. Before
this feature, there was a single setup script (oe-init-build-env).
Consequently, wordings and such were designed exclusively for this
single method. With the introduction of a second possible method
to initialize the build environment, tweaks to many sections were
needed. Beside the wording tweaks, appropriate cross-referencing
was also needed.
All these changes cover the integration of the new feature.
Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From yocto-docs rev: c55c9a53c9b4cd1e06e6e81e32d56f9bbf5fe98c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2808]
Found some errors in how I was labeling the various directories
created in the Build Directory upon image configuration. I corrected
the labeling by editing these two figures.
(From yocto-docs rev: 4a08ad8bda0617e18b9998b794267f743e445eaa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alexandru DAMIAN
Richard Purdie
Bruce Ashfield
Stefan Seefeld
Roy.Li
Chen Qi
João Henrique Ferreira de Freitas
Khem Raj
Ross Burton
Stefan Stanacar
Muhammad Shakeel
Hongxu Jia
Laurentiu Palcu
Paul Eggleton
Robert Yang
Peter Kjellerstedt
Scott Rifenbark
Darren Hart