There needed to be an entry in all the manual history tables
that indicated this version of the manual is for 1.2 but is
WIP.
Reported-by: Rudolf Streif <rudolf.streif@linux.com>
(From yocto-docs rev: 6792b88af4f0171cfc84e4d77bda871d4af3d36c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hongna Xu realized that the whole Bitbake Commander part
is missing in the ADT manual. This should be Section 4.8. She
sent the info and I created a new section titled
"Customizing and Image Using a BitBake Commander Project and Hob".
Reported-by: Hongna Xu <hongnax.xu@intel.com>
(From yocto-docs rev: eb207806dbd2f73089068ef9e3fa447aa8a38404)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Addressed all issues specified by [YOCTO #2025] except for the
very first one that says bring the versions up to 1.2. This will
be accomplished by the poky.ent bump at release time.
Fixes [YOCTO #2025]
(From yocto-docs rev: 926e5635d8cd74fff7e00002108ce8c039252203)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The style for the note, caution, warning, and tip headings was a bit
over-bearing. Feedback from the community indicated that those words
needed to be in a smaller, less noticeable font. I created the style
so that the font's size is about half of what it was and I also changed
the color to match the other headings.
(From yocto-docs rev: f54c6274e1972c52ba17d7ebd2ba84bf6d59c105)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Conversion of hard links to use the variables set up in the file
documentation/poky.ent.
(From yocto-docs rev: edbacc1b57f02c31ff6eaee666245be83fb17543)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated all the CSS style sheets so that the Note, Warning, Tips,
Caution, etc. boxes are not so prominant.
(From yocto-docs rev: 451568553e9620c1e247c2f67b0665b184c3300b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bad wording fixed to describe the changes to PATH when the setup
script is run.
(From yocto-docs rev: 0f2ae72edfab2a96cb5f82fac641f3b6fa364f36)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The menu for the YoctoTools in Eclipse moved from underneath
"Windows" to the top level. I fixed the reference to reflect
that change in the GUI.
(From yocto-docs rev: 10142812f55bce849b31c38337b0a731d71d2ba0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the wording in an example to use "menu" instead of
the incorrect "navigator pane".
(From yocto-docs rev: 751ac717d17356a77cd3967f9214be74a7bad910)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a bit more information to the third step of the
example that reconfigures a project.
(From yocto-docs rev: e21ebe5b665b50705fa863436e83af6cbd00eb5d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed a redundant link to the QS manual.
(From yocto-docs rev: 44ab96f9eaad8e57de760e2612e1a92bfe2ea898)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I worked through these methods and discovered a bit more on how
they actually work and when the user would use a given method.
The updates reflect this new knowledge.
(From yocto-docs rev: aa588a2bd2c28cc42db3a539ca5aba7233612de7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed redundant link for referencing a section of a different
manual.
(From yocto-docs rev: 5a78f2c4453944e750a0250f585bcb0614dbcbf6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added text to show how to unpack the generated ADT Installer
tarball.
(From yocto-docs rev: 32e7413623a5b43484d402989f892527e4a0fc48)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The URL for the edision tarball was old and had been locked down in
the manual too early. It changed and now this fixes it.
(From yocto-docs rev: c1668e41babd7ef592dc26271943c99bacc3f181)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I replaced the link with the URL that uses 'downloads.yoctoproject.org....'
(From yocto-docs rev: fef7ca4f2a549fabc1932a40a46cf0c6c834074f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the name was off. It was 'yocto-eglibc-x86_64-i586-toolchain-1.1.tar.bz2'.
Really, the name is
'poky-eglibc-x86_64-i586-toolchain-gmae-1.1.tar.bz2'.
(From yocto-docs rev: 3d051f3e814f27f661ce153b66735f75a4152d04)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the link to be 'download.yoctoproject.org/releases/yocto/yocto-1.1'
I also fixed the text that indicated 'i586' as a directory for the
32-bit machines. The real directory name is 'i686'.
(From yocto-docs rev: fc08acdce64bac7c2b3d4689e16cf06e70f6cbe5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During development, a footnote was added to the Development
manual. In order to get the footnote to display correctly, I
had to introduce a footnote element in the style sheet. This
commit propogates the style to the other manual CSS sheets.
(From yocto-docs rev: 0439b46620125f2cb26dff4e8c79fc479205133a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are many references to YP documentation throughout the
YP manual set. They used to have hard-coded links to the
current release (e.g. yoctoproject.org/docs/1.1 for Edison).
This created a situation where if you went to a document on
the website and clicked on a external reference to another
manual, you would redirect to the current manual on the website.
Really, you would want to go to the latest manual, which is
one that is under development. Changing the links to
"yoctoproject.org/docs/latest" makes the tip of master, which
is used for devloping the next release, always have references
to the manuals being developed and not back to the stable
released set of manuals.
This "latest" and "current" scheme for the links is not perfect.
What has to happen when the latest set of the manuals freezes
and becomes the next stable release, all the links in the docs
will need to be changed from "latest" in the URL to the new
release number. So for example, all the "latest" occurences
would need to be changed to "1.2". Then for the next cycle
as development begins again, the links need to be infused with
"latest" again.
(From yocto-docs rev: a234aef34303b07671da956de0e94b352797143e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Michael Tomer from Koko Fitclub reported that the link to the
ADT Installer tarball was broken. Fixed the link.
As Reported by: Michael Tomer <michael.tomer@kokofitclub.com>
(From yocto-docs rev: 891fc3123f73a7b856207e0cdef32821f0cd90a3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Discovered a missing section for installation of the Eclipse Yocto Plug-in.
This information is critical to the release. Jessica discovered the problem.
New section added that describes how to install the plug-in as a standard
"New Software" installation from within the Eclipse IDE.
(From yocto-docs rev: d4976ec56d39813a72519387897023f65a5884f6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After greping through the documentation directory, I addressed
all the <ulink> statements that used to have yocto-1.0 in the URL.
They are now yocto-1.1.
(From yocto-docs rev: 97d160263c5905fdeaf4ec285bc5359918790581)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made several changes based on feedback from Jessica Zhang.
1. Removed "SDKVERSION" as a way of identifying the directory in
which a toolchain tarball is installed. I replaced with "1.1"
2. Cleaned up the bitbake command verbage to consistently use
'bitbake' command.
3. Cleaned up an erroneous reference to the toolchain environment
setup scripts. I was referring the user to the oe-init-build-env
area.
4. Changed wording to indicate that the toolchain tarball is generated
after running bitbake rather than installing the toolchain.
5. Replaced the gmae tarball file used in an example to be the
regular taball.
(From yocto-docs rev: f7c3e4f4a666121a29825099d451eab1accb0616)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No need to use the long command to restart Eclipse. It will have
been restarted as part of the procedure. I updated the last paragraph
to simply point the user off to the next section.
(From yocto-docs rev: bca280e74f81a0401c520c8a59e9e07e16f28b8b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes are for installing the YP Eclipse plug-in using a built out
ZIP file.
(From yocto-docs rev: ea50f63d448b4ff6026a9334440058511782461d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made some slight edits to configuring the Eclipse IDE and the
procedure to install the plug-in from the zip file. This is not
complete yet.
(From yocto-docs rev: 96de3d21946d64e6b877f067912da8677c3d373a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made a few corrections to the section describing how to build
the tcf-agent into non-sdk images.
(From yocto-docs rev: e78dc3b3d3dd443506e78651cf9673358577c21d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The YP only ships one pre-built image that has the tcf-agent built
into it - core-image-sato-sdk. There are a couple methods that exist
to create images that do not normally have this agent so that they
will have it. I updated the "Getting the Images" section to
contain those steps. Lianhao and Jessica Zhang were the technical
resources for these changes. These changes are the first draft.
(From yocto-docs rev: 85432e4892c3fe924bf90961f89e8edfd9693e84)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated a link that was an autobuilder link to be
http://www.yoctoproject.org/downloads/yocto-1.1/machines.
(From yocto-docs rev: 91a4056a285b53f8c73494e8af88d9a98d6d61e0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the title pages for the ADT, BSP, Dev, and Ref manuals to
contain the Oct 6 release date for the books. Also, changed the
author field for the BSP guide to include Tom Zanussi as well
as Richard Purdie.
(From yocto-docs rev: 301da0a5b305e4b332397bb67f6a6a77751991d2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a new subsection to the section that talks about how to install
the YP eclipse plug-in. According the Jessica, we should document
this method for installing the plug-in.
(From yocto-docs rev: dea5b1dacc16c08d61356e95bece2aec581dd16d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YOCTO #1504: Added a note indicating what to do if the configure
script complains about --with-libtool-sysroot option.
(From yocto-docs rev: 575f4057ddfc2774a62bf349fd05d62b79dd278b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes reflect corrections resulting from Jessica Zhang's review
of the sections.
(From yocto-docs rev: c3fed39bc3909c38424e7e72c40471dcb0053c8d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After working through this stuff I was still confused as to how to
guide the user toward proper toolchain installation and on what they
needed to do for collecting their kernel and filesystem images.
These changes included some information on when and how to extract
the rootfs when the user is booting to NFS. Plus some other
general items like the significance of meta-toolchain-sdk as
compared to meta-toolchain.
(From yocto-docs rev: 2cc88b5193888a074ffd87cb253b9cfe08146877)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I had definitions for "The Yocto Project Files" and "The Yocto
Project Build Tree" in this chapter. They were misplaced. I have
deleted them and moved them to the development manual.
(From yocto-docs rev: 9238e75abc4578043fd625b3796b86d42204e16f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made changes to the section titles so they have quotes around them
for easier reading in the PDF manual.
(From yocto-docs rev: 5bea470682c3d834f30ab0d2fcba148ea33d653f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a development writer note and I noted that running a project
as an eclipse application pops a new instance of Eclipse.
(From yocto-docs rev: 6408ff7f4d59a0e535e560c7c0c63a3f373c640b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a couple of writer notes for development purposes. I also
formated the section title references so they have quotes around them
for easier reading in the PDF verison.
(From yocto-docs rev: 37adb580cf6c1369da43fc4ef7aaa4cc1cee0e5c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fixed some section naming conventions and minor wordings.
(From yocto-docs rev: 768d386c135c57ed3573e08bac72cad47fa101ce)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I discovered that in order to remotely deploy and debug an image from
Eclipse you have to have a Sato image. I added text to the note about
getting or building the image specifying that requirement.
(From yocto-docs rev: 060de7f6082bc3dbfa0f7d4e25b2933f15a61fc0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These edits are extensive and cross into two files: adt-prepare.xml
and adt-eclipse.xml. This is the first pass of a large re-write
to bring the examples up-to-date using the preferred version of
the Eclipse IDE (Indego 3.7). Much has changed.
(From yocto-docs rev: 57c1f905c6d66268a498e013193d003596f2303d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark