In the '1.1.3 Pre-built User Binaries' section it said that the
ADT and minimal images were kept in the optional
meta-<bsp_name>/binary directory. Jianjun Xu pointed out that
in fact it is just the minimal and sato images here. I also
confirmed with Tom as well. I re-wrote this sentence to be
clearer and more accurate.
(From yocto-docs rev: 6757abff52841b5d1e1991ab22314fa7a243a87d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the '1.1.4 Layer Configuration File' section there was a BBFILES
statment that used the '\' character to indicate a continuation of the
command on the following line. However, the example did not use
a new line. I added the hard-return to correct that in the example.
(From yocto-docs rev: 185352ae2f5879a8418715053f3791b167bd6d7e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the example BSP name 'meta-intel_n450' to 'meta-n450' in
the section 'Example Filesystem Layout.' Error found by Jiajun Xu.
(From yocto-docs rev: 0dd6f97dcc51cec4bae96ca0430af9300619749f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Performed a spell check and caught a couple small things.
(From OE-Core rev: 17ae7d1e05df495a5e27168cdcdfbcf96337a3f9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- use linux-yocto instead of linux-yocto-stable in examples
- change branch names to match linux-yocto usage
- remove outdated 'wrs' where it appears
(From OE-Core rev: 7f1662ef01b383c9fecb2b30ade50de97f17529a)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In the 'BSP Click-Through Licensing Procedure'
section, which is shared between the BSP Guide and the Poky
Reference Manual, there were three links to 'pokylinux.org'
sites. These links were intended to help a user get a license
for encumbered BSPs. However, the links never did work. The
section also had some wording that described a propsed naming
convention for BSP tarballs that were encumbered and non-encumbered.
The naming convention is a good idea but has not been followed
so far.
I removed the links and replaced them with general instructions
on how to get through the licensing situation. Also removed the
hard-line naming rules and replaces with a more general explanation
of how we are naming BSP (e.g. Crown Bay).
(From OE-Core rev: 4c2dcb376b4be0778cab97138fefdb8a27a0e708)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are some sections now that don't correspond one-to-one with the
standard file structure presented in section 1.1. So I am commenting them
out for now. Since I am still in the process of iterating on this
manual I don't want to just delete the information.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Section 1.1 has the example filesystem layout. The last line of the
example filesystem layout had linux-wrs. It has been changed to
linux-yocto-stable.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I added a reference to the specific section in the kernel documentation
that describes how to create a BSP Based on an existing similar
BSP. The tools we have that create the PDF manuals from the DocBook
XML do not support cross-referencing to another PDF manual. So, I was
left with adding a clunky text-based reference to the section and a link
to the docs page on the web-site.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added wording to indicate this directory as optional if the BSP had
special requirements for graphics support.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Found a mis-spelling that I corrected.
Also added wording to indicate this directory is optional.
Put in a note telling that defaults are set if a formfactor is
not found.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added wording to be sure user knows to replace "bsp" and "_bsp" in the
boilerplate template example with the actual BSP name (i.e. <bsp_name>).
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
It makes more sense to have the sections that describe the various
parts of the common structure as sub-sections to that. That pulls
out the click-through licensing into a higher-level section.
This is better overall section organization.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
There are some sections now that don't correspond one-to-one with the
standard file structure presented in section 1.1. So I am commenting them
out for now. Since I am still in the process of iterating on this
manual I don't want to just delete the information.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added some text in section 1.1 explaining that the file structure example
is an example and that the file structure of specific BSPs could differ.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Lowered the "E" for the "meta-emenlow" BSP.
Removed the "oaktrail" one, which is an Intel code name and replaced
it with "beagleboard", which is a non-Intel board.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added information in the section about Pre-built User Binaries.
In the first paragraph I stated that this directory would contain
the Application Development Toolkit and minimal live images when the
BSP is "tarred" up and placed on the Yocto Project website.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Two lines had been earlier turned into a single sentence but the
capitalization of the second line still remained.
I switched "The" into "the".
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Inserted a note that states the BSP file structure shown is an example
only and that a given BSP could have different files.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Replaced meta-<bsp_name>/recipes-<bsp_name> with meta-<bsp_name>/recipes-bsp.
This conforms to how the BSP standard will be working.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
1. Edited to incorporate new file system naming structure per Saul Wold. This
is the version I am sending him and Tom Z. to review.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Conflicts:
documentation/bsp-guide/bsp.xml
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
After moving BSP Guide into its own folder for documentation I discovered
a consequence of that. There are two separate bsp.xml files now: one
in the poky-ref-manual folder and one in the bsp folder. I had done some
good cleanup work in the version in the poky-ref-manual folder. This
commit reflects a 'meld' operation where I re-sync'ed the bsp.xml
file in the bsp-guide folder to be the same (almost) as the one in the
poky-ref-manual folder. There is still one slight difference between the
two files due to one's context as a stand-alone manual and the other as
a section in a larger book.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I created wording in the second paragraph of this file so that it can
fit both the context of the BSP Guide and the BSP chapter of the
Poky Reference Manual.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
There was a errant tag mis-match where I had used <orderedlist> and
ended it with </itemizedlist>. This was preventing the make.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
After moving BSP Guide into its own folder for documentation I discovered
a consequence of that. There are two separate bsp.xml files now: one
in the poky-ref-manual folder and one in the bsp folder. I had done some
good cleanup work in the version in the poky-ref-manual folder. This
commit reflects a 'meld' operation where I re-sync'ed the bsp.xml
file in the bsp-guide folder to be the same (almost) as the one in the
poky-ref-manual folder. There is still one slight difference between the
two files due to one's context as a stand-alone manual and the other as
a section in a larger book.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I created a new sub folder to hold the BSP Guide by itself so there are
three folders now for each of the Yocto manuals: BSP Guide, quick start
and poky ref manual. The new folder for the BSP guide is 'bsp-guide'.
It contains the bsp.xml file, its own Makefile, a bsp-guide.xml file,
and its own 'Figures' directory. The 'bsp-guide.xml' file that was
in the poky reference folder was deleted.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark
Richard Purdie
Tom Zanussi
Paul Eggleton
Darren Hart