Changes from Paul Eggleton after a review.
(From yocto-docs rev: 16daab4d3898906dc681d9dad391bd1bc9dce4fe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed a new title.
(From yocto-docs rev: 43f5ea0a86a6b87f23e59ffd7cb58ead20a26dda)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Realized that the section has nothing to do with booting the
modified image. Removed that from the title.
(From yocto-docs rev: 7fdf311ee23a53dbbd7f70e72768fb48b4afe134)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-worded the title for "Set Up Your Layer for the Build."
This resulted in a lone link from the kernel-dev manual changing.
(From yocto-docs rev: bf797a9ad4b40ded6bd3b4dc8cc3d8ac702f05a6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note in the bsp-guide to point back to the main
new section, which is in the dev-manual.
Made some small edits to the main section in the dev-manual.
(From yocto-docs rev: 4105c8edbdc531b2a941d7f7282325fae763f059)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some minor fixes to this area as directed by
Paul Eggleton. This represents a clean second draft that
can be reviewed. ]
(From yocto-docs rev: d3380d698d36e83aab16ac74e713ab03baef60b0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are review comments from both Paul and Bjorn.
(From yocto-docs rev: 773300f78b20bd601cbad750cfe32263fbe9d127)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3540
Further minor edits to make the example consistent.
(From yocto-docs rev: 863a955f5cf119a38db4950101270bd5a53da027)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3540
Realized that a better organization of the sub-sections could
be applied. Pulled the last two sections up a level.
(From yocto-docs rev: d196db9bf1f88aa0677453396abdd61bf5d724dd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3540
Applied changes per Jessica Zhang's feedback from the bug
entry in Bugzilla. I added some missing steps and also
tried to make the section stick with one example throughout.
(From yocto-docs rev: f995006a90a3646c92d54dc96a8fceae4de758eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rough text for a section within the layer section that
introduces and describes a bit how the new yocto-layer
script works.
(From yocto-docs rev: ee56a264600df9fe250e73b60c8dadd6f8e55009)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made the text more general and explanatory for what the
purpose of the chapter is.
(From yocto-docs rev: 23b595560770d2ffe1465b4a9f18bcf734b7b083)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Applied changes from Paul to the read-only-rootfs section.
2. Applied changes form Paul to the customizing images by using
IMAGE_FEATURES and EXTRA_IMAGE_FEATURES variables. This
was a simple rewrite of a sentence.
3. Updated the note in both the IMAGE_FEATURES and
EXTRA_IMAGE_FEATURES glossary entries to specify inside
of an image recipe (more specific).
(From yocto-docs rev: 762b9e4d3b45a9602284cf4dd1ac281dcbbed7f5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied Paul Eggleton's review comments on the section that
tells about enabling and disabling features through the
IMAGE_FEATURES and EXTRA_IMAGE_FEATURES variables. Using
different wording other than "add" features. Also, some
rewriting of an area that was rather clunky.
(From yocto-docs rev: 13e44345830130318e11b6877e2aff03e6c8ea4f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied the review comments from Paul Eggleton to augment this
section with more information.
Performed a spell check on the entire chapter.
Made the term "postinstall" consistent by defining its first
use in sections a "post-installation (postinstall) script".
(From yocto-docs rev: 179f478777fd02e3fa56d80951ce3eab350fc189)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* BBFILES should be appended to with +=
* BBPATH should be appended to with .=
* Immediate expansion is not necessary for BBFILE_PRIORITY
* Immediate expansion is not necessary for references in layer.conf
to LAYERDIR since these are automatically expanded at the end of
parsing the file (and have been for some time).
* Add collection name override to BBFILE_PRIORITY example
* Fix comments referring to old structure ("packages directory" or
"recipes directory")
(From yocto-docs rev: 0aaac8f5ad97c802ebe1d4f3ffb7987050533292)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I cleaned up the wording to indicate best places from which
to use the IMAGE_FEATURES and EXTRA_IMAGE_FEATURES variables.
(From yocto-docs rev: 68e9c8b3f8d9fe3a086ad77bc0c3b465380476b8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section that talked about IPK-specific information for
installing updated packages onto an existing running target
system is parse and really needs to be in the section that
talks about setting up a package repository. I moved it to
the end of that repo section.
(From yocto-docs rev: 3b1c5858527cba908a5acff1ddc924630cc954b0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A couple sets of review comments from Paul applied here.
1. Added the "read-only-rootfs" item to the EXTRA_IMAGE_FEATURES
variable description and a link to the appropriate section
in the dev-manual.
2. Pulled the how-to-create a package repository section out
of the section on how to customize an image with the
IMAGE_FEATURES and EXTRA_IMAGE_FEATURES section and made
it a stand-alone section in the "Tasks" chapter of the
dev-manual.
3. Integrated the SSH server example into the main topic
because we don't want an isolated sub-section within a
main topic.
4. In the image features section of the ref-manual, I fixed
the link with the "read-only-rootfs" feature to go to
the now-isolated section on how to do that instead of
going to the customizing an image using the IMAGE_FEATURES
and EXTRA_IMAGE_FEATURES variables section.
(From yocto-docs rev: 9c79b5f40d8dc6b37fbe636a2459f89b70bd8ea8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Paul Eggleton