Syntax did not have line-continuation characters in the zypper
example. Error found by Robert P. J. Day.
(From yocto-docs rev: 4ecbd3d1706336ddc691bf4ce6763a179f3f70a6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Toolchain filenames corrected. Discovered by Robert P. J. Day.
(From yocto-docs rev: 3afa1d71be04c6aedafe952855a23ccbd3547b68)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Was suggested that toolchains "should" be installed under /opt/poky.
This is in fact a requirement. I replaced "should" with "must."
(From yocto-docs rev: fe890b056831a84cde47f9200300491426f20c65)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example bitbake command now has the target core-image-sato.
This reflects post-bernard.
(From yocto-docs rev: 3ff1ee07947f301c4df2a9aea8d1aab15c5237eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Turns out that the package libtool is necessary for working with ADT during
the installation process. I need to mention this in the ADT manual but
it would be helpful if it was one of the packages in the QS along with
all the others. I added libtool to the package requirements lists
for the three supported hosts.
(From yocto-docs rev: 5f95fa1af0cfe9a97e437b8239e139479a1d5317)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partial commit for supported distribution change.
(From yocto-docs rev: 4a84894dc2964f0153294b87f6205c432a482ac2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I included a new note to help users of pre-15 release Fedora enable sudo.
Along with this I repositioned the note about using non-supported
distros into the main text. Overall the section includes more information
and is organized a bit better.
(From yocto-docs rev: b0ae94b97ae46562ddde79df83462adf88b94527)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the packages section to also include the zypper command
and supporting commands so that the OpenSUSE user can install
packages.
(From yocto-docs rev: 3a9a0f7fb03bf264e1587d181db111a542e7964d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added text suggesting that BB_NUMBER_THREADS be set to twice the number
of available processor cores and that PARALLEL_MAKE be set equal to the
number of processor cores. Similar changes were made to local.conf
based on work by Josh.
(From yocto-docs rev: e342a4af4d3ba000b348bbb9d125977fc0e95273)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the note that tells users YP must have Python 2.6 I added Python
2.7.
(From yocto-docs rev: 611ad6331a8b3e1acc98f2029a181a92f32220e0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed several instances to the 5.0 Bernard release. I replaced
these with the 5.0.1 release. I also re-wrote a paragraph that
instructs the user on where to find and download the most recent
YP tarball. It used to point to the Index of /Downloads into the
"yocto-1.0" folder. I now instruct the user to go to the
Yocto Project website and download the desired release from there.
(From yocto-docs rev: 30b5163730139b2b852d64c87a7e710b7fcc7dad)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Evidently the command 'runqemu' is not a valid command for Bernard.
I changed four occurances of 'runqemu' to 'poky-qemu'.
(From yocto-docs rev: 0296920cc07a6fb9871c5af4bb991fcee2949564)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the example for building an image the command
'source poky-bernard-5.0/oe-init-build-env poky-5.0-build' was used.
Torsten Scheck notified Jeff Osier-mixon and sent the fix to
change to 'source poky-bernard-5.0/poky-init-build-env poky-5.0-build'
I made the change.
(From yocto-docs rev: b96646efb203e482d53d922fb120672df5a09966)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BUGID#_1083 - I added the -k option as part of the bitbake command in the
example that builds an image. I did not explain it as that is beyond
the scope of the quickstart. I did however point the user to where
they can find information on it.
(From yocto-docs rev: 620351d38c67ff14cefc7a52bbc0e98789011677)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The command used in the example to build an image was using
'bitbake core-image-sato', which is only available in master and
not Bernard. So, I changed the command to be 'bitbake poky-image-sato'
at Dave Stewart's request. He located and pointed out the error.
(From yocto-docs rev: 3fa83550aaec5a3549825814a77fa7a823a2daea)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was an occurance of 'the the' in the manual. I removed it.
(From yocto-docs rev: fae94d71d74434abd8d306a045cdb95efe1dd9b3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made a few small edits and I added a reference to the
wiki page 'https://wiki.yoctoproject.org/wiki/BuildingOnRHEL4'
that has entries for older development hosts. Right now all that
is there is the RHEL4 notes but the wiki page can be expanded as needed.
(From OE-Core rev: a23acbd48ee911d9882a78491280977fb62ea156)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed "YP" from another spot in the manual.
(From OE-Core rev: 22f701b97a8d1412638f5ae79343a37791dde9e6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed this YP acroynm since we never use it.
(From OE-Core rev: b37cab45b4f0dbba0dedbbbe240e91db30df4b8c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 931] - I have removed the Note indicating that the user must run
'bitbake make-native' if running Fedora 14.
This is no longer a requirement for YP Release 1.0
(From OE-Core rev: 33a529f94c494531dbbfca5050898eb4c42f64df)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the Quick Start there is a note indicating that you should run
'bitbake make-native' followed by 'bitbake poky-image-sato' if you
are running Fedora 14 or another distribution that ships with GNU.
Colin Walters submitted a patch that offerred an URL for further
explanation on a Make Bug. The URL is
http://www.mail-archive.com/bug-make@gnu.org/msg06220.html. Rather
than submit Colin's patch verbatim I updated the note to include the
reference with a little different wording.
This extra information submitted by Colin will be very helpful.
(From OE-Core rev: d32ccd0ce620942447c7b49c6117c2ea7eff46ff)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a note to reference the FAQ entry in the Poky manual that describes
how to get around proxy and firewall stuff hanging up getting the source
code during a build.
(From OE-Core rev: f9abba290157c122f36aed5e52f1a0f792e3add2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the beginning of the manual I added references to the FAQs we
support.
(From OE-Core rev: 615a015189f3b09ea928f288516be1f90447cbf2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is first guess at the correct example commands and directory
names for the Bernard 5.0 release. I don't have any real directories
available to look at and doc changes are supposed to be frozen before the
actual build. So these are guesses and will need reviewed.
(From OE-Core rev: c052537216395019bc436291e1c2ec43c3abc3ae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 857] In the packages section for the list of Debian-based system package
requirements I added 'groff'.
(From OE-Core rev: b67204a99fe34a165f97dd6bb5191735a4632678)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added "Copyright 2010-2011 Linux Foundation" under the title. For
now this will have to do. Once we get the converted website up I
would like to see all manuals displayed as HTML files within the
context of the site layout. At that point we can have a copyright
and trademark stuff in a persistent footer.
[BUGID #696]
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Part of the fix for Bug 628 is to add a note that bitbake requires
python 2.6. I added this note before the example bitbake command
that builds an image. I also added a linked reference to the Poky
Reference Manual and mentioned the FAQ appendix. There will be more
information about the python requirement in the FAQ.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
[BUGID# 631] - I added a tip in the section where we show a sample build.
The tip says that you can add 'INHERIT += "rm_work"' to the local.conf file
to help conserve disk space during a build.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Depending on the architecture you are booting and the profile of the
filesystem image QEMU might come up in a new shell, and existing shell,
have a GUI, or be in command-line mode. I added a note indicating this
behavior.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The value for the 64-bit architecture was "x86-64" and not "x86_64".
Changed it to be correct.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The section that introduces the using a pre-built binary section needed
more items in the list. I added text for setting up the environment
and for starting QEMU.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The pre-built image section was one long section that naturally
broke into several areas. I inserted some sub-sections for better
organization.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I added the exact architecture strings for each of the five supported
architectures as part of the /opt/poky/environment-setup.... commands
resulting from installing the toolchain tarballs.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Revised the manual for better grammar and more technically accurate wordings.
Worked closely with Scott Garman on the revision.
Signed-off-by: Scott Rifenbark <scott@scott-desktop.(none)>
Added the packages autoconf and automake to both the Debeian-based
host and the RPM-based host example commands. During a fresh
development host system test run I found these packages were
necessary to develop Yocto projects using Eclipse IDE.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Made several small changes:
- Added a period to three-bullet list for consistency
- grammar fix to sentence
- Added clarification for getting stuff from qemu URL
- Fixed the forms for the image and the file system image
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Changed "source poky-4.0/poky-init-build-env poky-4.0-build"
to be "source poky-laverne-4.0/poky-init-build-env poky-4.0-build"
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
There was a grammatical error in the title and redundancy in the
first sentence of this section. Cleaned up the title and wording.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I changed the figure that goes along with building an image based on
Kevin's input. Also, removed several URLs that had 'yoctolinux' in them
along with a 'tar' command example with the same string. LF does
not want these in there.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Corrected a typo listing the package libsdl1.2-dev as libsdll.2-dev.
Also added the package mercurial.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added commands to support package installation of RPM-based host systems
to the example. Input based on feedback from Dirk.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
When scaled to fit the page the picture had a black vertical line
artifact to the right. I snipped out the image a little tigher to
eliminate this line.
I also incorporated Dirk's comments tightening up the sequence of
example commands to do the build. I incorporated Fedora 14 note
and addition of the BB_NUMBER_THREADS and PARALLEL_MAKE variables.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark
Richard Purdie
Scott Rifenbark
Richard Purdie