ICU presence is auto-detected at configure time and until recently (e68850 and
d61230) was pulled into most builds through harfbuzz and beecrypt. Now it's
floating and this leads to build failures.
As in all likelihood the majority of people were building this with ICU enabled,
add an explicit dependency.
(From OE-Core master rev: 46dcec6fd455584d9b5d0d7ff1e5b36fbe5a2d62)
(From OE-Core rev: 034d3e35cce9ee63f6139d19be9b3edec4f97a64)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #2519]
When getting gcc from sstate, it is possible to get a gcc with a bogus
sysroot configuration, as discussed in [1] or in [YOCTO #2519].
mklibs script will eventually call gcc, so we need to make sure that it
provides gcc with the right sysroot location.
[1] http://lists.openembedded.org/pipermail/openembedded-core/2013-September/084159.html
(From OE-Core master rev: 3a66dd762e493ad2cda57110be67c3b06628050a)
(From OE-Core rev: 7275425524b8bb3d16d5c0c0a62aee5b08359ffd)
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
syslinux is compling something with host gcc at do_install
stage, which leads to some unexpected errors with old gcc
on host. Using our cross toolchain instead.
(From OE-Core master rev: b0da7ccde5380726acfccf1a96cdf5560edf9159)
(From OE-Core rev: 17f851f5c8e2a90f558396654b62a8f0f88f137f)
Signed-off-by: Lei Liu <lei.liu2@windriver.com>
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
readprofile was missing from the alternative configuration, which was
causing readprofile to be packaged into the base util-linux.
(From OE-Core master rev: cac08f23aaed87148d1825cca3c7586ab891ef04)
(From OE-Core rev: a6fc9e62e848634e715b23f147c88a8710415845)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When preping a read-only rootfs and finding some post-install
scripts that can not be run, list the names of said scripts to
avoid having to look around the rootfs to find a list.
(From OE-Core master rev: 0188120691f433fdccf71b92618115195278c0af)
(From OE-Core rev: 2820f7fa411e5ca1cd7df765896b43716418340a)
Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On a multilib system when one of the multibs has a different OS then
other multilibs a failure can occur during the install process because
RPM assumes all systems have the same OS.
When an n32 platform is selected as an alternative multilib, it shows
up as mips64_n32-.*-linux-gnun32 in /etc/rpm/platform. This causes
problems when the smart tool tries to add a channel for the multilib.
RPM archScore call always returns zero for arch "mips64_n32" -
after appending default vendor and os, it finds "mips64_n32-wrs-linux"
doesn't match any predefined platforms. Fix this by removing the
restriction of -gnun32 suffix in platform file.
(From OE-Core master rev: d9489c44ee4f195ae1b09f340b9545cddba58145)
(From OE-Core rev: f0118b605b3727b5ca5d560094bb4dd2ff29c310)
Signed-off-by: Lei Liu <lei.liu2@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The cdg_decode_frame function in cdgraphics.c in libavcodec in FFmpeg before
1.2.1 does not validate the presence of non-header data in a buffer, which
allows remote attackers to cause a denial of service (out-of-bounds array
access and application crash) via crafted CD Graphics Video data.
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2013-3674
(From OE-Core master rev: f1721553a873b242bc26ad3e4d618aea39dfd507)
(From OE-Core rev: d4d908afca1c6ce64f05fabdadfcf86ab990dd0f)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PREFERRED_PROVIDER_virtual_pkg has been incorrectly set with more
than one multilib prefixes. For example, if we have two alternative
multilibs lib64 and lib32, PREFERRED_PROVIDER_virtual_pkg will be
set to lib32-lib64-pkg or lib64-lib32-pkg, depending on which
multilib shows up first in the list.
(From OE-Core master rev: 17a432dc059e24ba10d4baec988828c0025a5e46)
(From OE-Core rev: e5d8411869a2a018d0c8ab9d0e888027ac4208d5)
Signed-off-by: Lei Liu <lei.liu2@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
buildtest-TESTS is a phony target and does nothing which results in a
do_install error since the tests aren't built. Since there isn't
a suitable make target but the number of tests are small, hardcode
the two to build to unbreak the build when ptest is enabled.
(From OE-Core master rev: 5dd8653fdcda5e0e8b4f3c37a46f357bc97ec66c)
(From OE-Core rev: b9b213b43c5ff6aa7c04733ce035fc9832065328)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Busybox also provides sulogin command, so we need to use the ALTERNATIVE
mechanism to manage it.
(From OE-Core master rev: 8b3a799a87d18b1d113d59b3e7a681db5683e5f8)
(From OE-Core rev: 33d7487a92905824ab46f74d7185f84662ddb922)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The license_create_manifest function contains bashism, this will lead
to unexpected results on ubuntu build host, as sh is linked to dash on
ubuntu. Even if COPY_LIC_MANIFEST and COPY_LIC_DIRS are enabled, the
license files will still be missing on target.
This patch fixes the above problem.
[YOCTO #5549]
(From OE-Core master rev: 4df9daee5c732c0a20dabe8515577238a1508512)
(From OE-Core rev: 159e53f9402f1d1ceed8c6511c5874e199dea6e1)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
${KERNEL_OUTPUT} is being renamed/restored in bundle_initramfs task, so we
must ensure bundle_initramfs run after kernel_link_vmlinux where the link
of vmlinux is created as the bootable image.
(From OE-Core master rev: 3baa63b4d588c3262254528b406ede265dd117bf)
(From OE-Core rev: 4acf2eaea963d9b5e3cf547db092f95d192cf2ab)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In commit faa8cc6c2a582a32c695f3f2b0d45b6892c769fd dmesg.sh was
added to the set of init.d scripts. But the script was never put
in any run-level. This patch will add dmesg.sh to run-level S.
(From OE-Core master rev: 7d2767d4e27c6d0eaa56f3e126df56e65a5364c9)
(From OE-Core rev: fb7a6e0e3c5790415d56d14ec1a5eda5f9e6d039)
Signed-off-by: Hans Beckerus <hans.beckerus AT gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't support multiple -dbg/-dev packages, the package can generate
them but the system does not correctly handle them. Just move all devel
stuffs into 'udev-dev' and all debug stuffs into 'udev-dbg'.
(From OE-Core master rev: 014f7a33f399192268f28acac835551413c4768d)
(From OE-Core rev: a700493063efdc3f60fb77e9a4a15d9c89ee79c6)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
grub_2.0.0 requires xz to run or an error may occur.
(From OE-Core master rev: ffa2877c06c587d4ea56c55bfd0f67a88e42a772)
(From OE-Core rev: d3e1dde9ae75faa1015b80da74604c5ae360c3a6)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Flex needs m4 to run (see below) and, since the create_wrapper
introduces a bash dependency on target, give the path to m4 binary in
the configure command line.
Snippet from the flex documentation:
"The macro processor m4 must be installed wherever flex is installed.
<...>
m4 is only required at the time you run flex."
[YOCTO #5329]
(From OE-Core master rev: 64030f37b34f75144f53eef42d5822ede79e08bd)
(From OE-Core rev: d039150eae579af1bd85000982ef38a6b09bb90d)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
*PPC64 uses long long for u64 in the kernel, but powerpc's asm/types.h
prevents 64-bit userland from seeing this definition, instead defaulting
to u64 == long in userspace.
*fix the below error
|super-ddf.c:4542:5: error: format '%llu' expects argument of type 'long long unsigned int',
|but argument 5 has type '__u64' [-Werror=format=]
|dprintf("BVD %u has %08x at %llu\n", 0,
(From OE-Core master rev: d3caab6eb03264b4f4d744f914598022299011ba)
(From OE-Core rev: c5e59e68efcf2a3f902dbfd827da57ed3e8ad4ce)
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE-Core commit b7de1eaac9eed559b2d68058f5de67de74a6cb58 added an extra
argument to the compare_dict_blobs() function but missed adding the
argument to one call to compare two versions of the image-info.txt file.
(From OE-Core master rev: 24a45d752c3e3d0d8b59c040355e4fe7de22b041)
(From OE-Core rev: a51d96c44e6feac8322284c54bfc01ef598f8821)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When ptest is not enabled, the populate_packages_prepend function runs
wheter ptest is enabled or not. This causes ptest packages to get in the
dependencies list when ptest is not enabled.
(From OE-Core master rev: 826f4e4057a221127ac4c1d0658d975032fc7d90)
(From OE-Core rev: e739a64143901fa6f6f54e70445d19e9ce13dcf1)
Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Boost::thread uses functions from boost::atomic but doesn't actually
link with libboost_atomic. This works fine on platforms where
BOOST_ATOMIC_FLAG_LOCK_FREE is true but will lead to undefined
symbol references otherwise. Fix this by applying a patch from
the upstream bug tracker to add the missing library linkage.
(From OE-Core master rev: 1ffc27173576589191b037d111ecb59d94631de0)
(From OE-Core rev: 306fd06c7687340a0d4eb90e9aba9dc8669db07c)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is an race condition where psplash is not quite exited before the unmount occurs
causing a umount: /mnt/.psplash: target is busy message to appear, it's ok to lazyily
unmount and not get this message
[YOCTO #5244]
(From OE-Core master rev: 9ded366084f22f48ef72aa22acf6a38982d16d97)
(From OE-Core rev: 8c3e3c90daee1639ac8b2633d8f1e500697d9c52)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This updates lttng-modules for 2.3.3 and it also fixes the build with
3.12 Linux kernel.
While on that, we also renamed the recipe file to follow the other
lttng recipes which use the version number on it.
(From OE-Core master rev: 2d01bd48e689656bbe6189243d077f822092a14a)
(From OE-Core rev: 213ba50b8a747e1489f03872339e3931a99963a4)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta branch SRCREV to update the USB configuration:
The Beagleboard needs the USB PHY drivers in the kernel in order to enable
USB and Ethernet functionality. This fix ensures that they are built in
by tweaking the kernel config.
Tested on Beagleboard xM Rev. C2.
(From OE-Core master rev: 89a372840a957e540bed954e629aa68335b3dfe0)
(From OE-Core rev: ee9dd4a40916668927b0c4b4dfaa4f80c671c9b2)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the -rt SRCREVs to pick up the following fix:
ntp: fix ntp_notify_cmos_timer merge issue
PREEMPT_RT_FULL has a stubbed ntp_notify_cmos_timer due to a bad merge.
Renaming and restoring the full -rt functionality to this routine.
(From OE-Core master rev: 41d4f0feca69bf1b41f16f5f7d21bf7540e6c47a)
(From OE-Core rev: 0336b83df666617d61e8cd39c2d2a7f9c745064c)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta branch SRCREV to update the USB configuration:
The Beagleboard needs the USB PHY drivers in the kernel in order to enable
USB and Ethernet functionality. This fix ensures that they are built in
by tweaking the kernel config.
Tested on Beagleboard xM Rev. C2.
(From OE-Core master rev: 2a9944514362445ee891f6e77c4ae62950e247b3)
(From OE-Core rev: 670cd17b4ef4012a29eb4dee3c9899ccd5f967e6)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This update fixes two issues:
a) qemuarm boot failure
v3.10.13 picked up a patch for arm versatile interrupt mappings that fixes
the emulator boot out of the box. But it interacts badly with our previous
fix for the issue. Reverting the existing patch and going with the mainline
solution fixes the boot.
b) qemumips build warning and failure
Depending on the build host and compiler, the build of menuconfig throws
an potentially uninitialized variable warning. That warning causes an
error on archs with -Werror. We can do a trivial change to avoid the
warning all together (initilize it to null), and keep everyone happy.
[YOCTO #5460]
(From OE-Core master rev: 8d1a041891c87d0c2003c80f84b0501bdc9403a1)
(From OE-Core rev: 3928340ea03dc04cda9eb2eea021837421adf737)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta branch SRCREV to import some configuration updates
for the common-pc-wifi feature:
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211_WEXT=y
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_CRC8=m
CONFIG_CORDIC=m
(From OE-Core master rev: cdd8145a7f4abc75c4089a30206c277db2712649)
(From OE-Core rev: 3d3c7f004fd8c262f1b4e15e2552a5630f387457)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREV to include the latest crystalforest configuration
updates.
(From OE-Core master rev: 9480e5b7231a2923b5ebff9623827c5d90334df3)
(From OE-Core rev: a7b2d0550157413834c9c5a3022745b25ad97fef)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.10 SRCREVs to add support for the haswell-sc and crystalforest
boards.
(From OE-Core master rev: 47ebe8677ac0dc4f8799d0af75f5b7bc611fd882)
(From OE-Core rev: 06bef5014bac6e0d935453330dfec05153d71ad0)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREVs to reflect the integration of the .17 -stable release
and the preempt-rt up date to -rt11.
(From OE-Core master rev: cefa022b814b8b4f9afacecf3bb035d211a0f3bf)
(From OE-Core rev: 65491b70eeebcc579c8d9933be165fcd860bf2c7)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.10 SRCREVs to update minnowboard support via the following changes:
3F6C824 pch_gbe: Add MinnowBoard support
9f52743 pch_gbe: Use PCH_GBE_PHY_REGS_LEN instead of 32
ec7b5e6 pch_gbe: use managed functions pcim_* and devm_*
fd8bf50 pch_gbe: convert pr_* to netdev_*
9b278e9 serial: pch_uart: fix compilation warning
8982d79 serial: pch_uart: Fix signed-ness and casting of uartclk related fields
cdbf456 serial: pch_uart: Remove __initdata annotation from dmi_table
9e7c25e pch_uart: Use DMI interface for board detection
(From OE-Core master rev: 6c7115a56c3d0bf3d6d0275bd2d49d8cfef5c028)
(From OE-Core rev: 436b39e4d9484dc74f88d635af97eee3d6d1704b)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a backport from upstream fixes a severe problem
w.r.t memory management, where it would result in random
segfaults in applications depending on libnl
(From OE-Core rev: c3fb18aac0de49dc3113296699d95be298d98140)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_configure() in binutils.inc includes an explicit call to
gnu-configize so we need to make sure that gnu-config-native is
present. Previously this was being dragged in with the rest of the
autotools stuff, but commit 54a3e2ee37003fc56af0339f857b0b6442790c26
disabled that for binutils-cross on the grounds that "we don't
autoreconf" the toolchain components. Fix this by adding
gnu-config-native itself explicitly to DEPENDS.
(From OE-Core master rev: 616354f13732d13c17434d5b60b166f691c25761)
(From OE-Core rev: c7b50b95ab27d3ea3b37e3ee16050af962746f5c)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since kernel will build twice when we are trying to bundle kernel
and initramfs together after commit 609d5a9ab("kernel.bbclass,
image.bbclass: Implement kernel INITRAMFS dependency and bundling"),
thus, the second building for kernel would fail if rm_work is done
previously.
To fix this problem, we need to make do_bundle_initramfs task run
before do_rm_work task.
[YOCTO #5416]
(From OE-Core master rev: 8308e22a44a2dea7d1bbfb429b9df9c63714a649)
(From OE-Core rev: fef443f1c40a3847cac08f4885d046acf6ede023)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
backport the patch from busybox upstream to fix the
auto insert newline issue.
busybox defect:
https://bugs.busybox.net/show_bug.cgi?id=6584
(From OE-Core master rev: db00fa405c025c61844df2e9589fe635fc5df0e2)
(From OE-Core rev: 9266343cc00fefd3e7f33fa2e6b0da88b6abf622)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using sysvinit testing service status, nfsserver status
allways display as [?] unknown.
This is because sysvinit package check whether service's
init script supporting status function or not by:
grep -qs "\Wstatus)" "$SERVICE"
So, this commit modified the indent for status etc, as
most service's init script does.
(From OE-Core master rev: a6b02fe439fa13c8482383fba2bfdcb0e9742141)
(From OE-Core rev: f9be1ec26cf1f313d7c22e26475296b0362c25ea)
Signed-off-by: Qiang Chen <qiang.chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sshd status command results in error prompt:
root@qemu0:~# /etc/init.d/sshd status
/usr/sbin/sshd (pid 1199) is running...
/etc/init.d/sshd: line 100: return: can only `return' from a
function or sourced script
"service --status-all" command also display wrong status for sshd.
This commit fix this error prompt and make service command display
right status for sshd.
(From OE-Core master rev: e7cf83ec3f39a7c41e38c6030b0d903fa7d37b2a)
(From OE-Core rev: 1b5409b5b060459f15c32c89b1983122b2126f84)
Signed-off-by: Qiang Chen <qiang.chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mklibs requires the "dpkg-architecture" utility to work.
Add dependency on dpkg-native.
(From OE-Core master rev: 9811641e95dd7e1514eb41900e033a0548bd13d8)
(From OE-Core rev: f4a5005518e2384b22593063010a3fa1179f5861)
Signed-off-by: Lei Liu <lei.liu2@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
File command in some version could print extra space between
"LSB" and "executable" - it causes mklibs can't find any executables
using grep "LSB executable". Fix the grep pattern to catch
multiple spaces.
(From OE-Core master rev: a52ef8c5dcd71f39bb48c71fb868cc0db662560e)
(From OE-Core rev: 78c22d9087b3058dd947f21bd24fa621aba7dd6d)
Signed-off-by: Lei Liu <lei.liu2@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Weston 1.3 needs to run on a VT, which is typically handled by weston-launch.
Currently weston-init doesn't use weston-launch as that depends on the
(non-default) pam DISTRO_FEATURE, so depend on kbd and use openvt directly.
This also fixes problems caused by the init script blocking until Weston exits,
which meant that later init scripts were not actually running.
(From OE-Core master rev: 3726eb29cfa79a4a1fbdbcaa96f770063c482858)
(From OE-Core rev: d79f7846f5d538f6f835f52686fd2c749cb1b70f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, our system had no boot log even if the bootlogd daemon was
started correctly. The root cause is that the log file doesn't exist
when starting the bootlogd.
Add '-c' option to bootlogd so that it will create the boot log if
it doesn't exist.
[YOCTO #5273]
(From OE-Core master rev: 6059be3ab60b8ab463d438c47bb17553d184a790)
(From OE-Core rev: f676a69dee845cfd6de7a0cc8bd0bb813a8dffc0)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes below issues:
1. Make can't exit while compilation error occurs in subdir for plugins building.
2. If build ppp with newer kernel (3.10.10), it will pick 'if_pppox.h' from sysroot-dir and
'if_pppol2tp.h' from its own source dir, this cause below build errors:
bitbake_build/tmp/sysroots/intel-x86-64/usr/include/linux/if_pppox.h:84:26:
error: field 'pppol2tp' has incomplete type
struct pppol2tpin6_addr pppol2tp;
^
bitbake_build/tmp/sysroots/intel-x86-64/usr/include/linux/if_pppox.h:99:28:
error: field 'pppol2tp' has incomplete type
struct pppol2tpv3in6_addr pppol2tp;
^
The 'sysroot-dir/if_pppox.h' enabled ipv6 support but the 'source-dir/if_pppol2tp.h' lost
related structure definitions, we should use both header files from sysroots to fix this
build failure.
(From OE-Core master rev: b536824ea64b8d6729b830738bce637fc815e832)
(From OE-Core rev: 16968759d39534fb9a703903c6de65535d57777b)
Signed-off-by: Lu Chong <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core master rev: a678243d6e4add90c1e9459da42de34d3724db5d)
(From OE-Core rev: 9d59ceab6e58b422caf8ad7a306ed546316d8c3a)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid infinite loop if the last record in EXTRA_USRES_PARAMS doesn't
end with a semicolon.
It's possible the the users will write configurations like below.
INHERIT += "extrausers"
EXTRA_USERS_PARAMS = "useradd tester; useradd developer"
In such situation, the do_rootfs task will enter an infinite loop.
An infinite loop is never acceptable.
This patch fixes the above problem.
(From OE-Core master rev: bf4fb345a9db306fa4c7211b7e6795334a649dd5)
(From OE-Core rev: 05f9c15abb0705cd9f8aa28bfb3016485730b643)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This check was looking for /run/mdadm on the host system, this check is optional so disable it.
[YOCTO #5447]
(From OE-Core master rev: d62882794890eeee8e8d5c9ba4837ec77a58d787)
(From OE-Core rev: 6c212e229ba1be0c536e7c36ebe2a3e8b2ef84b4)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some further structure definitions are needed in include/linux/if_pppol2tp.h for
IPv6 support, else we would get the error as below:
In file included from plugin.c:53:0:
bitbake_build/tmp/sysroots/intel-x86-64/usr/include/linux/if_pppox.h:84:26:
error: field 'pppol2tp' has incomplete type
struct pppol2tpin6_addr pppol2tp;
^
bitbake_build/tmp/sysroots/intel-x86-64/usr/include/linux/if_pppox.h:99:28:
error: field 'pppol2tp' has incomplete type
struct pppol2tpv3in6_addr pppol2tp;
^
make[2]: *** [plugin.o] Error 1
(From OE-Core master rev: 73d08c4bf12e2cc4f291cb018d00b26a5a573be4)
(From OE-Core rev: 398bae0d288f488020108c7d95bd376249e6ecbf)
Signed-off-by: Lu Chong <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some revs of the EFI firmware + shell do not automatically setup the
path in a such a way as to execute a binary without an absolute
reference like "FS0:\EFI\BOOT\bootx64.efi". All the versions that I
have tested work properly by simply calling the binary which is in the
EFI\BOOT directory by name like "bootx64.efi".
The error you see on the console looks like the following:
startup.nsh> EFI\BOOT\bootx64.efi
'EFI\BOOT\bootx64.efi' is not recognized as an internal or external command, operable program, or batch file
Shell>
This patch simply drops the EFI\BOOT for greater compatibility.
(From OE-Core master rev: 754b52ea7a3cdf8e7e939a314525d16c4dfb52cb)
(From OE-Core rev: a65db42d4b0c6636ee6538a28930e4d19e170d18)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When boot-directdisk class is used and EFI boot is set the
grub-efi-${TRANSLATED_TARGET_ARCH}-native need to be dependent.
Allowing GRUB_IMAGE to be created and bootia32.efi got from the
image directory.
(From OE-Core master rev: b9778975db410b8cd01ef6854c7cd3ea22a0b5b7)
(From OE-Core rev: b14ba80d22f4892a4d9269dbf982b2f88109da98)
Signed-off-by: Joao Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default value of SYSLINUX_SERIAL_TTY is not correct.
It should be console=ttyS0,115200 else the boot string generated in
the syslinux menus for the serial choice is not correct. The kernel
boot parameters will get set to:
/vmlinuz initrd=/initrd LABEL=boot root=/dev/ram0 ttyS0,115200
Note that the above is missing the "console="
The default value will now work the same as the value found in
grub-efi.bbclass.
(From OE-Core master rev: fbc864241933c6f40814f47e7a85dd71ce255393)
(From OE-Core rev: 042e0f59d058c5caad4a3b8e8f08ec724d5c837b)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The vtX terminfo files aren't being copied on systems where bash isn't
the default shell (debian, etc.). I removed the bash specific syntax
so the files are properly copied on these systems.
(From OE-Core master rev: edd7d53c6149b27d5636a458db91650c8c400612)
(From OE-Core rev: ccb25cd9df9ed4b84b74170336cfde5c1dc3d013)
Signed-off-by: Seth Bollinger <seth.boll@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this patch filenames containing spaces do not get into the final
ext2/3/4 filsystem.
[YOCTO #5401]
(From OE-Core master rev: 1350b461ed0c9d4afa1ab909a5b1ff60fb160c97)
(From OE-Core rev: 62d01b10508f86ca825ebc24773dfa2b485b4292)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This class points the inheritor, if it is a target,
to directories in the target sysroot, so we want to
be sure the .vapi files are there.
(From OE-Core master rev: 2da8bbd47686f54efeec521d521f176f6aeb8d39)
(From OE-Core rev: e68307c3fb0a02efe5e0789a58686f343c842707)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PowerPC toolchains can use the OS "linux" or "linux-gnuspe". This
patch links them together so the one cross-canadian toolchain can support
both.
GCC_FOR_TARGET is set for the GCC recipe as otherwise configure
can pick up an incorrect value.
[YOCTO #5354]
(From OE-Core master rev: a1d6331238982b0c5d39b0a18794f6654b00d46a)
(From OE-Core rev: b114b045687776ebc5c805e1f19758e7e37eebf2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
in
commit fe039170236080291c0220476a5809774f82ee5c
Author: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Date: Wed Oct 2 10:55:32 2013 +0000
systemd-compat-units: Use correct run-postinsts script link
OE-Core commit 75a14923da has moved
run-postinsts script execution from S98 to S99 in rcS.d. run-postinsts.service
should check for this script and run it on first boot rather than
S98run-postinsts, which is for opkg/dpkg.
the link was corrected but the mentioned commit is not available. Instead of
reverting, we use the same variable as opkg for init script ordering and drop
a note in case somebody wants to change default.
(From OE-Core master rev: 7aabc9408fb382f0ae39f9932b6d9ac391528b76)
(From OE-Core rev: 91a51e10392c0f802d6c329ad2b11ae82c55f171)
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BitBake currently allows using the same quotes outside and inside the
value, but it isn't really right, looks odd and might stop working in
future.
(From OE-Core master rev: 0af9cf31851896276a219170001047406f45de50)
(From OE-Core rev: 4051c98ebfe79614d1284b38442d5a3290bb4ad1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow the user to provide additional packages to this image.
This lets core-image-basic behave like all other core-image*
recipes (which do support CORE_IMAGE_EXTRA_INSTALL), as well
as match the documentation which suggests this as the mode to
extend any core-image* image.
v2 - drop redundant setting of CORE_IMAGE_EXTRA_INSTALL
(From OE-Core master rev: 5faabf398819d40b55c46bc83ae03942d115024b)
(From OE-Core rev: cdda59d2850b163ced4dfc847c4e114f8592ae52)
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add the openssl-conf package to the list of packages to
be created. This package contains the openssl.cnf file
which is used by both the openssl executable in the
openssl package and the libcrypto library.
* This is to avoid messages like:
WARNING: can't open config file: /usr/lib/ssl/openssl.cnf
* When running "openssl req" to request and generate a certificate
the command will fail without the openssl.cnf file being
installed on the target system.
* Made this package an RRECOMMENDS for libcrypto since:
* libcrypto is a RDEPENDS for the openssl package
* Users can specify a configuration file at another
location so it is not stricly required and many
commands will work without it (with warnings)
(From OE-Core master rev: 5c3ec044838e23539f9fe4cc74da4db2e5b59166)
(From OE-Core rev: bf6ef555caf92b2a013f15d258bf40997247a150)
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Qiang Chen <qiang.chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
/etc/init.d/dbus-1 use "set -e" to let the script exit when any command failes.
This will cause "/etc/init.d/dbus-1 status" command can't display messages when dbus is stopped.
(From OE-Core master rev: 9844b5e2a544b2c2f76aac497c3a2cdfcc46577c)
(From OE-Core rev: 486d5d7e891df3fb2ce8d975d13625b11334814b)
Signed-off-by: Lu Chong <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core master rev: 9032c10cc882a96acdfd0739f090d121ab625a18)
(From OE-Core rev: c191cb79019482a5c6a404e02184bae40ff9f84a)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ldd sysroots/x86_64-linux/usr/bin/gdk-pixbuf-query-loaders.real
<snip>
libz.so.1 => /sysroots/x86_64-linux/usr/bin/../../usr/lib/libz.so.1 (0x00007fab55393000)
If zlib-native has not been unpacked, host libz is used which can fail.
(From OE-Core master rev: 8422c759ae674856aaaee176eab5a395a620443c)
(From OE-Core rev: b9ae15b45768d25c44a9484b4a156a15da548bd9)
Signed-off-by: Konrad Scherer <Konrad.Scherer@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core master rev: 3af8f2e0697a9523d3b505ba4c48eca35f6de3a9)
(From OE-Core rev: 438032411ea5d71a33b7b030752193867a90b9f7)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using the tar executable in the buildtools, tar will execute
gzip. If this happens before zlib-native is built, then the gzip
on the host will be used and can fail if the libz in the buildtools
is not compatible. Adding pigz to the build tools avoids this host
contamination.
(From OE-Core master rev: af6424e8c2bf3a938fddabc669c0956d68964ed0)
(From OE-Core rev: dd9945dd510d6e7764721bec5573591a0ad69ba4)
Signed-off-by: Konrad Scherer <Konrad.Scherer@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While ELF_C_RDWR_MMAP was used, elf_begin invoked mmap() to map file
into memory. While the file's bss Offset has a large number, elf_update
caculated file size by __elf64_updatenull_wrlock and the size was
enlarged.
In this situation, elf_update invoked ftruncate to enlarge the file,
and memory size (elf->maximum_size) also was incorrectly updated.
There was segment fault in elf_end which invoked munmap with the
length is the enlarged file size, not the mmap's length.
Before the above operations, invoke elf_begin/elf_update/elf_end
with ELF_C_RDWR and ELF_F_LAYOUT set to enlarge the above file, it
could make sure the file is safe for the following elf operations.
[YOCTO #5356]
https://bugzilla.redhat.com/show_bug.cgi?id=1019707https://bugzilla.redhat.com/show_bug.cgi?id=1020842
(From OE-Core master rev: 35c8b1ac7c3b1e4209b1e30d1dbd1a457286b97b)
(From OE-Core rev: a82322a982dc97ebc95f3fc45f9ad98bed947ad9)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Wayland support depends on wayland-egl, which is provided by mesa.
(From OE-Core master rev: a1a379b3c9728a06b086b4c1f06f663f54d7d37d)
(From OE-Core rev: 8c75d888a5e4cf7fc2c92df730d80224f5ffa99a)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libpseudo.so is always installed into ${prefix}/lib/, not ${libdir},
so fix these paths; and skip libdir WARN_QA checking to ignore the
warning in 64bit and multilib enabled system
(From OE-Core master rev: 47c7850c025994685aa1811057f4f9a5f0f2a3ae)
(From OE-Core rev: 1929d4ef17652a3eb825942041908d679773244f)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no need for += when using append hence removed and added a
leading space appropriately
(From OE-Core master rev: fb9cde0fc1a54b073edf5979f4cb7dc297b790fd)
(From OE-Core rev: 586db07af01da9d7772b7088a20886b506e09422)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will allow apps using QLibraryInfo class to find qt.conf.
[YOCTO #5339]
(From OE-Core master rev: fffa4c37c49b169f663d28612b9251819cef9577)
(From OE-Core rev: 8dc1d62c5dc161ba606cebe27f6fe900699646f7)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When installing the SDK to another location than the default one, qmake
will look for libraries, headers, etc. in the default location. That's
because the paths are hard-coded in the binary itself. Luckily, QT
allows to override this using a qt.conf file installed in the same
directory with the application executable. However, we already have a
patch that allows for the installation of qt.conf in another place and
read the location from QT_CONF_PATH environment variable.
Hence, install qt.conf in ${sysconfdir}. This will allow other apps, that
use QLibraryInfo class, to find it.
[YOCTO #5339]
(From OE-Core master rev: 23f88695683a8e428375a8ccb6be935347a8768c)
(From OE-Core rev: 0e71811a1c3285a71cbca682cb62c1563d3e74ee)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core master rev: 89d7d46947d9bb8c7bf568c65e52d5bbe159027f)
(From OE-Core rev: 7c6504c6c059ba6b37f88143801ac8137267cf83)
Signed-off-by: Konrad Scherer <Konrad.Scherer@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
nfsserver restart without killing kernel threads worked when portmap
was the rpc publishing process and portmap was restarted.
When rpcbind replaces portmap, nfsserver restart in this way does not
work after an rpcbind restart.
Steps to reproduce:
1). Make ext3 filesystem image on local host.
cd /root
dd if=/dev/zero of=test bs=1024K count=50
mkfs.ext3 -F test
2). runqemu qemux86-64
mkdir /mnt/wrtest
mount -t ext3 -o loop test /mnt/wrtest
echo "/mnt/wrtest *(sync,rw,no_subtree_check,no_root_squash)" > /etc/exports
/etc/init.d/rpcbind restart
/etc/init.d/nfsserver restart
showmount -e localhost
mkdir wrtest
mount -t nfs localhost:/mnt/wrtest wrtest
mount: mounting localhost:/mnt/wrtest on wrtest failed: Connection refused
Modifying the nfsserver script to kill and restart kernel threads on
restart makes the problem go away and is consistent with current
RHEL/SUSE and Ubuntu/Debian mechanisms of handling the nfs server.
(From OE-Core master rev: 1a96b8d7dfc490fc61bbd470a8b09065750cd563)
(From OE-Core rev: d1b5e944656807c9db9cbe5d08d7b4bd8daeb826)
Signed-off-by: Rich Dubielzig <rich.dubielzig@windriver.com>
Signed-off-by: Qiang Chen <qiang.chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An incorrect process name in the nfsserver initscript prevented
rpc.statd from being shut down.
root@qemux86-64:~# /etc/init.d/nfsserver start
creating NFS state directory: done
starting 8 nfsd kernel threads: done
starting mountd: done
starting statd: done
root@qemux86-64:~# ps | grep rpc.statd
650 root 10532 S /usr/sbin/rpc.statd
654 root 4720 S grep rpc.statd
root@qemux86-64:~# /etc/init.d/nfsserver stop
stopping statd: done
stopping mountd: done
stopping nfsd: done
root@qemux86-64:~# ps | grep rpc.statd
650 root 10532 S /usr/sbin/rpc.statd
662 root 4720 S grep rpc.statd
As this daemon drops a pid file,simply use that instead.
Also add some initialization checks so the daemons are not
left partially started in the absence of kernel nfsd support.
(From OE-Core master rev: 37e70a28e9cfc773bd70f09d7129295ce891ae18)
(From OE-Core rev: 5f22bad97a3bacb87cefb54ffd785d359c58aec0)
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Qiang Chen <qiang.chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As the same reason to powerpc64, mips64 also need the flag.
(From OE-Core master rev: d6f3cb0d71c3b6739365f085b6d5a5e20f329fa5)
(From OE-Core rev: 9c4b604ea0d81bc1de224b35ae160f87be6bcf7b)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mDNS name resolution is a key part of mDNS, so if the DISTRO_FEATURE is enabled
then install libnss-mdns.
(From OE-Core master rev: ef2ee68778be8e5336cd33ab6551bce1d56047b6)
(From OE-Core rev: fb72bebc999aef7bb006a7ba273eaa96376a4016)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PACKAGECONFIG flags were iterated over using dict.items(), but this
returns the items in an undefined order. As this order determines the
EXTRA_OECONF append order, we can get EXTRA_OECONF which are functionally
equivalent, but whose contents differ, resulting in not using shared state
archives we should be using.
(From OE-Core master rev: 843a5dd8f8f0461e286d9fdb3ba55205b4275f88)
(From OE-Core rev: 73f77c195e1af3df594eecce2cab47ee963d5c2e)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
midori depends on webkit-gtk which could not build for mips64.
[YOCTO #5141]
(From OE-Core master rev: abadeb934d4f41288c4fde6a4e5df2b124326326)
(From OE-Core rev: 672cd50a39a697b53c337a79c34fab05b48e0920)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Test that filter backup module files (files starting with ~)
was accidentally reversed in e6039e6e3b98d6ab91252a5012d76279b1fac6e8,
this patch restore initial behavior.
(From OE-Core master rev: b2eb846ee12989add7a7ca8bbf45f293a3a7e56d)
(From OE-Core rev: 00ff958fec53e55cc475c1b31fb9813d97872ceb)
Signed-off-by: Michaël Burtin <michael.burtin@innotis.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this init script fails when the default shell is busybox sh. This
is because busybox sh doesn't set the UID. No other init scripts
in oecore feel the need to check the UID so just remove the check.
(From OE-Core master rev: dd6a45536043af34c05a699e468cef4845f7affd)
(From OE-Core rev: 11385321982411d3d1c2aa663b2b2d195c74f353)
Signed-off-by: Jack Mitchell <jmitchell@cbnl.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PPC64 uses long long for u64 in the kernel, but powerpc's asm/types.h
prevents 64-bit userland from seeing this definition, instead defaulting
to u64 == long in userspace.
Perf want LL64, flag __SANE_USERSPACE_TYPES__ to get int-ll64.h.
Fix the below issue:
| tests/attr.c:71:4: error: format '%llu' expects argument of type 'long
long unsigned int', but argument 6 has type '__u64' [-Werror=format=]
| tests/attr.c:80:7: error: format '%llu' expects argument of type 'long
long unsigned int', but argument 4 has type '__u64' [-Werror=format=]
| attr->type, attr->config, fd) < 0) {
| ^
(From OE-Core master rev: e0b56f7ed84da4f71f448548e15d5a75e8eada6e)
(From OE-Core rev: 7d55375ddc1a928e77d5687a8e7b36eecb91c594)
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If bootlogd was configured to write to a log file on the root file system,
the checkroot.sh was not able to change the rootfs to read-only because
bootlogd was started earlier and had a file descriptor open. Lowering
the order of checkroot.sh ensures that the volatile filesystem is set
up before anything writes to it.
(From OE-Core master rev: 13c9bc143f6861517970dafdc7e7a45740d0933d)
(From OE-Core rev: e54864e6db9fddb8ec98e323fe6da88e02ff070a)
Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com>
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In normal use this is pulled in through libpng, but it's exposed in the headers
of cairo-pdf and cairo-ps and a build from sstate can end up without zlib being
present.
(From OE-Core master rev: 8413bf1ce95802bff032b4592ca1aa4728d62cbf)
(From OE-Core rev: 252896140bb107315e58bbd82b9a73528da9b860)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Both nativesdk and multilib use MLPREFIX for their partciular purposes. When
we have both set, cross-canadian can confuse SHLIBSDIR. This forces the
variable to the correct value for cross-canadian, fixing toolchains in
multilib builds.
[YOCTO #5333]
(From OE-Core master rev: 0633b93086a7de7226f4dc6ca403ee116bc58669)
(From OE-Core rev: 003ddbccb260cdbfc6c1ff9e576a0584b0f25378)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are missing brackets in the check meaning MLPREFIX doesn't
get set for nativesdk-qemu-helper when it should be.
(From OE-Core master rev: 5011f4bc8a418d0616d2936b60ecb7ca156632a3)
(From OE-Core rev: 48b4bb2f98a1b7b97688071af4c2d3ee390b6ab3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will allow packages that update kernel modules to run correctly
(From OE-Core master rev: 72c23255cc88b5e2cd6f783231e6f42bf5190df7)
(From OE-Core rev: bce32a41c7e700f49aaa0aacbeb6c83d91a8b255)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--without-x was removed in 1.32.0, so the correct option is now --without-xft.
Also remove --disable-glibtest, as configure.ac doesn't invoke that test.
(From OE-Core master rev: e806f4ff404515f38318b6fed7d2b614c2138da6)
(From OE-Core rev: 147eac9794bd815f7f10002beacbe47302352ca4)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core master rev: a5afc67cbfc32beb3be10392bf9788cfc3610ab1)
(From OE-Core rev: 18e49ebf8d5cc43eca417cd51cabae175f6b5ea4)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Xorg libraries that use Xmalloc need to know if malloc(0) returns NULL or not,
and as this is a runtime test it can't be checked for. Previously
xorg-lib-common declared that malloc(0) did return NULL, but this isn't true for
eglibc (only uclibc).
Instead, use libc-specific overrides to pass the relevant option.
(ideally the check would use the autoconf cache so this can be stored in the site files)
(From OE-Core master rev: e628c8aba0189de30de2833882b9999ff3b6547a)
(From OE-Core rev: 93e084ae8bcae8e7bde5a7e52a274a39dc9ba509)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the part after "tty" in the device name go into label along with
everything after that part. For example if SERIAL_CONSOLES="115200;vt100;ttyS0"
than label=S0 but if SERIAL_CONSOLES="115200;ttyS0;vt100" than label=S0;vt100.
If SERIAL_CONSOLES="..;ttyX;..", part after 'X' should also be trimmed.
(From OE-Core master rev: b00b9ae5693e04cacd0843c12a529e7f3dc501ed)
(From OE-Core rev: e807747f28798b080bf13a65293ab04c8d83834c)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can't use htobe* and be*toh functions because they are not
available on older versions of glibc, For example, shipped on Centos 5.5.
Change to directly calling bswap_* as defined in byteswap.h.
(From OE-Core master rev: 63edb6b9a8bdf2f5541edd618f2f598185e37223)
(From OE-Core rev: 2e791639625746037626e348cfac4ad1109bb9ae)
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The group for /dev/hda should be disk instead of root.
The group ID for /dev/hda was 6, but it was modified to be root by
accident in the following commit.
commit c5ef0294a9b8d178896a47c9f5d6e3dd6797e343
device_table-minimal.txt: use user/group names instead of uid/gid
This patch changes it back.
(From OE-Core master rev: 5c5db302400894c2bb1f4052d0f120738589c128)
(From OE-Core rev: aaaba8d087bd4186cd2e309b962d62f240f96b98)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 0bd63125c3.
As discussed on the mailing list, this change changes layer layout
in a stable branch which is unaccetable. The was accidentally
backported and should not have been, this reverts it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When user runs devshell in kernel recipe and compiles kernel,
this will fail by unrecognized option of LD.
----
$ make
...
arm-poky-linux-gnueabi-ld: unrecognized option '-Wl,-O1'
arm-poky-linux-gnueabi-ld: use the --help option for usage information
----
This set to empty LDFLAGS when user runs the devshell, and solve this problem.
(From OE-Core rev: e36ac3ab3a7fe02c7eeb3998ff33c001ab795841)
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When passing the wrong value for UBOOT_CONFIG it ought to raise an
error otherwise it is quite difficult for user to notice it didn't
behave as expected.
Reported-by: Lauren Post <lauren.post@freescale.com>
(From OE-Core rev: 5110dc988e3b8a1ce8b2309e4ddf17abb3f1cb0c)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta branch SRCREV to incorporate the two following
configuration changes:
452f067 lxc: Add lxc kernel config
a249eba x86_32: Enable X86_32 and disable 64BIT explicitly
(From OE-Core rev: 64d4c508652bc5d8a0b4c01f0d0813e58d6b39a6)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta branch SRCREV with the following commit:
[
The oe-core live class now fully support compressed ISO images this is
the corresponding kernel change.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
]
(From OE-Core rev: af2ef5085e92ca6291dabb134a7a3fb194a21d7a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta branch SRCREV with the following commit:
[
meta-haswell-wc: update bsp scc to use linux-yocto-3.8 standard/common-pc-64/base branch
Remove "branch haswell-wc" from haswell-wc-standard.scc
so that "haswell-wc" BSP uses standard/common-pc-64/base branch
on linux-yocto-3.8 repo.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
]
(From OE-Core rev: 978c77cae12f69e05ad97c6edd03d292098fff88)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the overrides are being applied backwards. This means something which is
platform specific is overriding something which is machine specific which
is clearly not intended.
This patch corrects the ordering to match the normal expected behaviour of
OVERRIDES.
Secondly, all overrides are being searched for each path in turn. What should
really happen is that we should look for the highest priority override (e.g. distro
or machine) in each layer, then move on to platform/tune (e.g. armv7a) and
then to arch (e.g. arm). This patch therefore also reverses the for loops
to achieve this behaviour and give the result the user would expect.
(From OE-Core rev: 92cbf7eeea553bfa24c7081473fa8bc4ebc1f552)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having a SRC_URI called ${PN} is asking for trouble. When extending FILESPATH,
alsa-state can be treated as a directory and copied over the contents of ${WORKDIR}
which is invariably not what the user wants.
Avoid this by renaming the SRC_URI to something else and only call
it alsa-state at install time.
(From OE-Core rev: 04c73333e4b539de96f096ca2954b2313175edc4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before checking if the image is a valid value, we need to check if the
list of items is big enough or we will raise an exception.
Reported-by: Lauren Post <lauren.post@freescale.com>
(From OE-Core rev: b833837cac377e7c1c3ff18531b152340b669329)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tar version 1.27 returns:
tar: --same-order option cannot be used with -c
with the commandlines we have been using. We can remove the -s option (which
is --same-order) to remove the error.
(From OE-Core rev: 69c26e795c117aabfaf313abbfd10e70ede633d9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tar version 1.27 returns:
tar: --same-order option cannot be used with -c
with the commandlines we have been using. We can remove the -s option (which
is --same-order) to remove the error.
(From OE-Core rev: 3d5a6d0a480a0fa98260a3b3ffc71b8d9e3e58af)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a fix missing from a previous commit:
http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=20a86e16bc54b74fbdb2a3a407d54210ea262925
since there was another section of toolchain-scripts needing updating.
This patch fixes the missing reference and unbreaks the ADT toolchain.
[YOCTO #5340]
(From OE-Core rev: e1b8b4859f00b40fb941a07a394ed35e06541663)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
when x11 is not defined in DISTRO_FEATURES, there are no x11 headers
so True is not defined leading to :
| ui/sdl.c:62:8: warning: type defaults to 'int' in declaration of 'doing_grabs' [-Wimplicit-int]
| static doing_grabs = True;
| ^
| ui/sdl.c:62:22: error: 'True' undeclared here (not in a function)
| static doing_grabs = True;
| ^
(From OE-Core rev: d3d5ccd3275196fb9e4cb8f49d3c087b97c20ed6)
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it's autodetected and configure doesn't allow to explicitly disable it
(From OE-Core rev: 983446c4f4274b9fd482b2d6b711428f4483c02f)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* dbus-glib was missing in DEPENDS in order to enable dbus backend
but because dbus was in DEPENDS lets enable this PACKAGECONFIG by
default
(From OE-Core rev: c832c457ff40f0f65ab28c17b78b88cb79823db1)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At the start of install, python swizzles the makefiles around, leading
to chunks of do_compile running again. These race against the install
target, leading to errors if pieces are being recompiled whilst others
are being installed.
For now, workaround this by running the compile target with the new
makefile, then running install ensuring a parallel make race doesn't
happen.
(From OE-Core rev: 72938a8631cfe5be5ac88ad67f2db595e2487e86)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The postinst files were being generated using purely the name of the package,
this unfortunately meant the run order would be based on the name of the
package and not the order in which it was installed on the filesystem.
If package A requires package Z to be fully installed, this causes a problem.
Note:
rpm - as the rpm based install proceeds the order is defined and captured.
so the problem is resolved there.
ipk - this unfortunately does not appear to solve the problem for ipk, as
the status file is not ordered in any appreciable way. This does not
cause any regressions however and sets the stage for a proper fix.
deb - this -may- fix the deb install. Early testing indicates at least some
ordering to the status file. But it's unclear if it completely resolves
the issue.
(From OE-Core rev: b5bafccb89f45d7cdd515b4ba45e0152ca7922de)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #5313]
When performing an attemptonly install, we should skip an errors and
continue to install everything else. However, there is a case where two
packages can conflict, and cause a hard failure.
This workaround, ignores this and allows the image to be constructed.
Note: Some items in the failed transaction may not get installed.
To fix this properly we need to find the issue in smart, and make it ignore
or at least attempt to resolve these kinds of conflicts.
(From OE-Core rev: 4228005689e31ebcafcf0969e80fcc021d1ae063)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In case of QEMU machines, a global public DNS is provisioned,
as the network is not configured via DHCP.
Google's public global DNS server 8.8.8.8 is used.
Partial fix for [YOCTO #4587] (qemu machines case).
(From OE-Core rev: 05ebf5bbacc58315f1b33ffb80148d568f88855d)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When these functions change, the package should rebuild but currently it
does not. We need to add the dependencies manually as the dependency
code can't track dynamically created variables.
(From OE-Core rev: 4003218f774c38bb5de0d95a43153f8b8d7fc4ce)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When these functions change, the package should rebuild but currently it
does not. We need to add the dependencies manually as the dependency
code can't track dynamically created variables.
(From OE-Core rev: c5d7100a358244085a697a23790676df5eb4afa3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE-Core commit 75a14923da has moved
run-postinsts script execution from S98 to S99 in rcS.d. run-postinsts.service
should check for this script and run it on first boot rather than
S98run-postinsts, which is for opkg/dpkg.
(From OE-Core rev: fe039170236080291c0220476a5809774f82ee5c)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make kmod-ptest able to compile with separated source and
build dir. Since kmod test files contain kernel modules for
many different architectures, strip and arch gets confused
and throws errors.
(From OE-Core rev: 61cb45869caaed6578a217effaa72d247395d078)
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Björn Stenberg <bjst@enea.com>
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes the following QA error:
ERROR: QA Issue: nativesdk-dbus: Files/directories were installed but not shipped
/run
/run/dbus
(From OE-Core rev: 796b7510853e71f158ad18dcea4cd1a10c7ef294)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have a number (in fact most) BSPs that require INPUT_EVDEV for basic
functionality. The size increase is minimal, so we'll add it to the
standard configuration for all platforms.
(From OE-Core rev: 965affabbf36fa5b5e466d331479c2295269242e)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bb.utils.copyfile is for a specific purpose and more complicated than needed
here, so just use shutil.copyfile.
(From OE-Core rev: dc81df215cc94c279991df35125d94770a1bc3d2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some packages may return error while running opkg-cl configure, during
first boot. This will fail 'ExecStart' and 'ExecStartPost' will not run.
Without 'ExecStartPost' opkg-configure service will continue to run on
successive boot attempts. 'ExecStartPost' should disable this service
after first boot irrespective of 'ExecStart' status.
(From OE-Core rev: cd6041071ddf76693cda7632379ceddd1d21a7fb)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The cross-canadian compilers are now build once per architecture but were being
installed into tune specific locations which is incorrect. This adjusts things
so they are make TARGET_ARCH specific. We gain the tune specific parts from the
target sysroot which remains tune specific, the compiler and tools are independent
ot that.
binutils/gcc require sysroot options but since we reset at runtime, these shouldn't
have dependencies in the sstate checksums. They are therefore also excluded.
With these patches, switching machines does not result in a rebuild of *-cross-canadian
and the compiler is correctly located and referenced in the target images.
(From OE-Core rev: f58acab6414fe96d9e07ebbe86b348d2ac2bed5f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
MACHINE=X bitbake nativesdk-pixman; MACHINE=Y bitbake nativesdk-pixman
where X is an armv7a machine and Y is not results in pixman rebuilding
due to the neon option. This is incorrect. The ultimate fix will be
not to apply target system overrides in the nativesdk case. Until
we do that we can at least work around the issue as done by this patch.
(From OE-Core rev: 2881747ec270bffc039d10198399e2686407b521)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We only care about the end result in this case, not the specific inputs
that went into determining the gcc option. This change updates the code
to reflect that.
(From OE-Core rev: 83055511dab1e2aeefe84262ebe52595848c844b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you build nativesdk for machine A, then change to B you will see sstate
manifest warnings for the packagedata files. The stamps are machine
specific and should not be, ditto for native.
This patch copies the populate-sysroot extra stamp entries to avoid
these warnings.
(From OE-Core rev: a64de25d6006ec6dd777d8f3820a48244dfbf62b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of looping until the generated signature is non-zero, just
return 'ffffffff' if it's zero. This avoids an infinite loop if the
generated signature is always zero.
(From OE-Core rev: 34c74ba45c04efc2dd998545bf7a31d7b06a0ee0)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 609d5a9ab9e58bb1c2bcc2145399fbc8b701b85a added additional
initramfs functionality and created an additional task on kernel.bbclass
Adding this task was missed on the linux-dummy recipe, which causes task
dependency issues due to image.bbclass depending on
"virtual/kernel:do_bundle_initramfs". This change adds a dummy task
which resolves the dependency issue.
(From OE-Core rev: c0a8c5c07e0dd6f0ae302e9a4dcf7973e73e68e1)
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This ensures that makedevs will not cause image creation failures
when it encounters a pipe (fifo) that exists from a previous image.
This handles mode changes and it will correctly fail for dangling
symlinks.
[YOCTO #5288]
(From OE-Core rev: 3a4b0e7973bef43f16058137e64600e2f890b117)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dpkg uses xz as a compressor and the binary image is needed on the system for
dpkg to work correctly.
[YOCTO #1881]
(From OE-Core rev: 8f6bc04c9b563f8659ce0e053072deca02da38a5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a potential issue with the fastop code in pseudo since a process may
exit and allow some other function to run before the server has processed
the commands run by the process. Issues have been see with unpredictable
file permissions.
To avoid this, we ping the server before exitting which guarantees it has
processed the current command queue.
The patch was written by peter.seebach@windriver.com
[YOCTO #5132]
(From OE-Core rev: a8a1f12c51ffdca011db194894fd7d14c119fb09)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a bug in handling of the mxcsr register since cpu flags
were not getting updated after fxrstor operations. This small tweak
fixes that.
[YOCTO #5248]
(From OE-Core rev: 5dc43cdc08e6698afa16ba79f3506a1555bb3710)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Buffer used for copying a "%c" character was getting
out of scope when it was required by the sprintf operation.
[YOCTO #5272]
(From OE-Core rev: c7de71813c8f47438f44749136877442cf73d536)
Signed-off-by: Marius Avram <marius.avram@intel.com>
Signed-off-by: Irina Patru <irina.patru@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
exit 0 was done if $D != NULL, if one or more
shlibsign executions fails.
(From OE-Core rev: 5dc3eb72c4b9b68ab13310383a90fe7779bf92a7)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A zero MBR disk signature is generally seen as no signature and
another partitioning program might install a new signature.
(From OE-Core rev: b6cafb1fcd6c168f8f4a4d2d5c74f3b425f156f3)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Activating the INITRAMFS_TASK can cause circular dependencies, but
that is up to the end user to resolve in recipes. The INITRAMFS_TASK
should also trigger immediate linking of the cpio task in the first
compile pass. This was a subtle regression introduced by: 609d5a9ab
(kernel.bbclass, image.bbclass: Implement kernel INITRAMFS dependency
and bundling).
This patch restores the previous behavior and only affects the
INITRAMFS_TASK which is not set by any of the default build profiles
in oe-core.
Reviewed-by: Andrea Adami <andrea.adami@gmail.com>
(From OE-Core rev: 36faac868e086e9c23537b107cdd973d7fd980bd)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently opkg uses a script to configure packages during first time boot.
This script is present in rcS.d and when 'sysvinit' is disabled this
script doesn't execute. For systemd only distros this newly added service
will run the opkg configure during first boot only.
(From OE-Core rev: fdcfcea5b8eae1769a217f8efea9c02f037f63fa)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libfm uses "preferences-desktop", so link it to the close-enough
"preferences-sytem".
x11vnc uses "computer", link it to "terminal".
pcmanfm uses "system-file-manager", link it to "file-manager".
[ YOCTO #4062 ]
(From OE-Core rev: d856488179d14d05f1121c171abf4eac82e81fb9)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sato doesn't use the pcmanfm desktop, so hide the desktop preferences launcher.
(From OE-Core rev: 778ef56c4b5c0d450a9b2e1df2b3e963dcfebed9)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During parsing this recipe builds up a list of splash image files,
however it was recording full paths to local files (i.e. the files next
to the recipe) and then in do_compile it was pointing to those instead
of the fetched files in WORKDIR. Fix it to use the fetched files which
has the added benefit of the do_compile signature not changing if the
recipe is moved around.
Fixes [YOCTO #5250].
(From OE-Core rev: f1850f9835651baee8d3a0858d00a5d22efcab19)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We wipe out and regenerate all configure files so there is no point in
patching them.
(From OE-Core rev: 8d7036cdb71e66e619053c2545cfc1fbddf1895b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
native recipes were not using the site files. There are some things we need
to correct such as not using the path to sed-native. This allows us
to deploy settings globally for all recipes rather than hacking around
then in individual recipes as libtool-native used to for sed.
This fixes a regression introduced by
http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=32edeb391f2107bb66b361cdcd4b8d4447731c33
(From OE-Core rev: db2eb3258844458569b7d4e6ed82c345858a3b99)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It seems strange that runlevel always returns 1, The comment says it is
related to sysvinit, but if we enable systemd, sysvinit will not be
installed. and we have created a link for runlevel to systemctl if
systemd is installed.
(From OE-Core rev: adc11d60fd4b555198d6653cd71eb1372e0b03a0)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is correct behaviours to output help and version information,
and should return 0;
When input parameter is invalid, print help information and exit.
(From OE-Core rev: 7c61daa08fa51557e0e6785e738646cb5d8de91b)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add an example device_table in the SDK under /usr/share/
(From OE-Core rev: be697e3cfa67fa61aa9ef2c9c0c75f4ed452414e)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default value of SFTPSERVER_PATH is "/usr/libexec/sftp-server" defined in
dropbear-2013.58/option.h, but after commit 406bd38b423[bitbake.conf: change
libexecdir to ${libdir}/${BPN}], sftp-server is provided by openssh package,
and is installed into ${libdir}/openssh, so we pass it explicitly.
(From OE-Core rev: 5f6deb044226885912214532cebb1d871f03c53a)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
xz is required on the target filesystem since it's needed
to unpack some of the bootstrap packages.
(From OE-Core rev: 3f302e6686e9c35d3fd771b8aed214bf739e59f6)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
eglinfo.inc has some board-specific EGLINFO_DEVICE settings but is missing the
dependencies. Maintaining them for all supported devices in oe-core isn't
scalable and this is trivially supported though a bbappend in each BSP layer.
This was also causing problems compiling eglinfo on meta-yocto-bsp's beagleboard
machine as the EGLINFO_DEVICE setting for beagleboard was telling it to use the
closed GPU drivers, which are not supported in meta-yocto-bsp.
[ YOCTO #5224 ]
(From OE-Core rev: 2c1e147e61875054039ff08c36657c68c73037ee)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The battery applet emits a warning if the hardware doesn't have a battery (it
shouldn't) and the parser emits a warning if two separators are used in a row
(which happens if the hardware has a keyboard). Silence these with a patch from
upstream.
[ YOCTO #4061 ]
(From OE-Core rev: 4e2b86787ed7a44ad88aa1431207d049c2cb444a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The various populate methods need to accept a path as an argument vs
using hard expanded variables. In the case of the boot-directdisk
class it uses a different path for HDDDIR but it gets eclipsed by the
the class definition at the point in time ${HDDDIR} gets expanded.
The logical fix is to pass the arguments to the functions as opposed
to using globally expanded variables from the class definitions.
This patch changes 3 things:
1) syslinux_hddimg_populate takes an argument for the destination
2) syslinux_iso_populate takes an argument for the destination
3) populate is changed to boot_direct_populate because there
was a conflict with it overriding the populate in bootimg.bbclass
[YOCTO #3994]
(From OE-Core rev: 63d164b755b984021f7e3cdba7280918ded6e821)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A newer version of syslinux is required for an EFI enabled isohybrid.
This is used for the the capability to generate 3 types of ISO images,
all of which can be booted off a USB device or HDD if copied with dd.
1) PC BIOS only ISO
2) EFI only ISO
3) EFI + PC BIOS ISO
The syslinux.bbclass required a minor tweak because a few .c32
libraries require dynamic loading from the created media as of
syslinux 5 and up. This was a good time to also fix the
duplication of the AUTO_SYSLINUXMENU block.
[YOCTO #4100]
(From OE-Core rev: 17d74fbd09e377e100423e1a73b9d4ce761a21d7)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The mkzftree is needed to allow ISO images to be compressed with
minimal runtime overhead. Below is an example of the savings on a
core-image-minimal.
Before ls -l:
24117248 core-image-minimal-qemux86-64.iso
Using the mkzftree ls -l:
16777216 core-image-minimal-qemux86-64.iso
(From OE-Core rev: 808d4371939ec48ed62e0c0b6614b96d61b1f7b8)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The SYSLINUX_SERIAL variable was hard coded and occasionally needs to
be different for the kernel argument vs the syslinux argument.
In the auto-generated boot mode console=tty0 was hard coded, and this
is not needed at all, and causes problems in some cases if a end user
wanted to change the console=... via the kernel boot argument APPEND
mechanism. The default can be forced with SYSLINUX_DEFAULT_CONSOLE
for systems that need a special specification to enable the frame
buffer instead of a serial port.
[YOCTO #3944]
(From OE-Core rev: cf2fba810a8a59cff71bf2c12e516e9080146604)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The syslinux.bbclass already has support for automatically generated
serial and graphics menu choices. This patch adds the same concept to
the grub-efi menu. That makes it possible to generate a single image
which can boot on a PCBIOS or EFI firmware with consistent looking
boot options.
[YOCTO #4100]
(From OE-Core rev: 8444199fb598012f54853b010b5e5cce750db89d)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the latest mkisofs it is possible to generate 3 different types
of ISO images, which can be used in various scenarios.
1) PCBIOS Only ISO
- This option remains unchanged by this commit
- Uses syslinux menus
- Can be directly copied with dd to a USB device
- Can be burned to optical media
2) EFI Only ISO
- Uses grub 2 menus
- Can be burned to optical media
- If you want to use this image on a USB device
extra steps must be taken in order to format the USB
device with fat32, and copy an EFI loader which will
in turn load the iso image
3) PCBIOS / EFI ISO
- This is a hybrid image ISO that will work for case 1 or 2
as above with the same restrictions and boot menu types
depending on what type of firmware is installed on
the hardware or depending on if EFI or "Legacy Boot" is
enabled on some UEFI firmwares.
The syslinux.bbclass is now always required because that is where the
isohybrid dependencies come from as well as the configuration data for
the isohybrid. The isohybrid is the secret sauce which allows the ISO
to work as optical media or as a disk image on USB or a HDD/SSD.
[YOCTO #4100]
(From OE-Core rev: a4baf911ab9d306ce5200e7d794ed6a9ccb25f30)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The iso9660 file system support needs to be added to grub in order to
be able to correctly find the grub.cfg. The grub commands to locate
the grub.cfg also needs to be encoded into grub's default
configuration.
This change allows the resulting grub binary to work both in the hard
drive / USB boot case or the optical media boot case.
[YOCTO #4100]
(From OE-Core rev: 0bc0762a479b5182a07fccb2b1e9cd5fc15ca485)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The BB_ORIGENV variable isn't picklable and causes failures when generating the task
signature for the autorun image mode. We don't want to depend on its contents anyway
so lets exclude it.
(From OE-Core rev: 3f5f9d2681d41e44dade5d3a5a4bff3fd38f5506)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Log files will open in leafpad under Build Appliance.
Part of [YOCTO #4727] fix.
(From OE-Core rev: 1645a3c1d288a4de38683129ed146198d8093a47)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A text editor is needed to examine log files.
Part of [YOCTO #4727] fix.
(From OE-Core rev: e598642988d1be1812b8df8ecd4f9d53f66068c9)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The function that "bitbake package-index" relies upon when using the RPM
package backend (package_update_index_rpm()) uses MULTILIB_PREFIX_LIST
to get the list of package architectures to be indexed, but that
variable is only set when populate_sdk_rpm or rootfs_rpm are inherited,
which is not the case for the package-index recipe. Until we're able to
refactor this properly, for minimal impact just use the value of
ALL_MULTILIB_PACKAGE_ARCHS if MULTILIB_PREFIX_LIST does not give us any
architectures (the equivalent function in the ipk backend uses the
former variable).
Having "bitbake package-index" working is important because it's the
only practical way of indexing RPM packages for use as a feed; host
versions of createrepo won't work properly because they won't support
indexing recommends relationships.
Stopgap fix for [YOCTO #5278].
(From OE-Core rev: 9359719c563e1ab0ff10186d1a1b6bde7840dbf3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Putting a warning at the top of do_compile is useful but not everyone reads the
file from beginning to end, so use a trap to put the message at the bottom too.
[ YOCTO #4919 ]
(From OE-Core rev: 51950fcbe4b98bdbb8b3dde88a8729e540d9609f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the future bbnote/bbwarn will be integrated into bitbake's logging, so use
those functions instead of echo directly.
(From OE-Core rev: 4933d7ae45d88090191c8ea07fd109ed34925e2d)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This currently leads to a floating dependency on GTK+. Since most users
in an embedded context won't need this, just disable it by default.
Fixes [YOCTO #5116].
(From OE-Core rev: 6bef1e02dff6c6482791ab424d7e5dedeb840cf6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If sed-native is built before these programs, hardcoded paths to sed-native
can end up in scripts and other parts of the system which may cause issues
if they are later used from sstate and sed-native is not installed.
To avoid this, this patch changes the global site configuration to
specify that plain "sed" is fine to be used. We need to spell this
out for gcc since it doesn't see the site files since we don't autoreconf
it. We can remove the values from libtool. We tell perl to use "/bin/sed"
since it requires a path and the system sed should be just fine for it.
[YOCTO #4971]
(From OE-Core rev: 2ec171cb188601bf18c6c2895870907024b1c52a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
busybox 1.21.1 's mdev has changed the way the device's name is
reported so now we get input/event0 instead of event0.
I think this commit is responsible of this new behaviour :
http://git.busybox.net/busybox/commit/util-linux/mdev.c?id=c3cf1e30a3022453311a7e9fe11d94c7a381640e
Update mdev.conf according to this behaviour so that sound
and input devices are correctly populated (and now
/etc/mdev/find-touchscreen.sh is executed).
Tested on an arm board.
(From OE-Core rev: 61b2950ebbc01f5e4fd7aece05bf371100c0c390)
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping the 3.10 meta branch SRCREV to import the following config changes
for tghe sugarbay and common-pc wifi fragments.
dad2b7e common-pc-64: add kernel CONFIG options for sugarbay platform
37c617d common-pc-wifi.cfg: add support for broadcom wifi drivers
[YOCTO #5117]
[YOCTO #5238]
(From OE-Core rev: 180f465b0cab13e17dc92ac5c88d7d9001cd5b11)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the MACHINE can now be specified in adt-installer.conf, in order to
install the proper toolchain and environment script for the given
machine, add a sanity checking at the beginning to make sure MACHINE is
set for the wanted architecture.
Also:
* uncomment the x86 target variables, in adt-installer.conf, in order
to have qemux86 MACHINE set, by default, and also the sysroot
installed (since it doesn't make much sense to install the toolchain
without a target sysroot);
* remove 'sudo' when creating relocate_sdk_tmp.py because the file is
created in adt-installer directory;
[YOCTO #5259]
(From OE-Core rev: 0623a0e1bd7cf0c405a0469e9f16779971c0c3b5)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, if SDK is installed in a directory that needs sudo
preivileges, the target sysroot is also installed with sudo, even though
the location is in users's home directory.
This patch reuses the ownership checking code and uses it to check if
sudo is needed for target sysroot too.
[YOCTO #5259]
(From OE-Core rev: 5acfced041477d8c272485196e87ad601a0ce5b4)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We switched to using os.mkdir with the file creation mode specified as the
second parameter. Python masks this with umask behind the scenes which isn't
what we want, we really want the permissions we specify.
To avoid this we zero the umask beforehand and restore afterwards. Other
solutions are possible but would not perform as well which is why
we're using os.mkdir in the first place.
Martin Jansa deserves the credit for debugging where the problem was.
(From OE-Core rev: f91226553e39439bfd17ab2b06c56cb8bf41061b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of considering that ping test passed after 1 reply,
wait for at least 5 consecutive replies in 60 seconds (which should
be enough time for connman to reconfigure the interface in systemd
images and help with the fake ssh/tests fails.)
(From OE-Core rev: 6fd19a9df0ad25b2822f12e2c3a97f1b71068d4e)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add useradd, groupadd et.c. since all target packages
which inherits useradd will have a postinstall hook
dependecy against the yocto specific groupadd.
(From OE-Core rev: 829edcb6e59e2e20dd4165b727b685f286f38031)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a second in a series of patches to enable
offline rootfs creation from a package repository.
Some postinstall cmds are Yocto specific and needed to create a
rootfs with pre and post install hooks successfully run,
using only the toolchain tarball + a package repo.
End goal is to create a sandbox where users of a Yocto
based distribution can customize a rootfs from a package feed
with their package manager of choice.
With this patch, I can successfully create packagegroup-core-boot
with only the toolchain tarball(OPKG). More fixes for a few postinstall
hooks outside of packagegroup-core-boot will come next.
(From OE-Core rev: f90e1a45a042468e4e9a0fc91b57c6dba6f7adc9)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
distutils: Replacing path to native path only to be done to non-native python packages
distutils: Replacing path to native python by path to python in the
image to support python packages with console-script setup resulted in
a "bad interpreter" error message because coreutils-native is not
a specified dependency of a number of native python packages.
We modify the change to apply specifically to non-native packages.
(From OE-Core rev: 312b6b33dca565153bc2e92d7ff6dd2974db4edb)
Signed-off-by: Amy Fong <Amy.Fong@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The po.m4 file is deleted by the more recent autotools.bbclass
autotools_do_configure code which handles gettext. There is therefore
no point in patching the file anymore.
(From OE-Core rev: 986c660cdb34e23a9c72f219db9363a6b4e4b7ec)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The po.m4 file is deleted by the more recent autotools.bbclass
autotools_do_configure code which handles gettext. There is therefore
no point in patching the file anymore.
(From OE-Core rev: c3265281c3ab0979ec2753eb7580c39b005d5fa9)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do not use pushd, busybox does not support it if system only has busybox;
Replace find command with ls to avoid some busybox's find unsupported options;
(From OE-Core rev: 1f059654bc81e55896c96c7c8e32e09f8925a761)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently do_install_ptest_base is failing because it cannot find
'test' directory in build dir, ${B}. 'test' directory is present in source
dir, ${S}. Same is true for build-aux/test-driver and test/sys.tar.xz.
Also this fixes:
QA Issue: systemd: Files/directories were installed but not shipped
/usr/lib/udev
/usr/lib/udev/rules.d
(From OE-Core rev: bec8a29fb27ccdada0839d0bdd67ae22179a94e8)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pushd is not available when system is using dash as default shell
(From OE-Core rev: ec7e738845f72888b0016340d7da636e5ec46a1b)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If do_patch re-executes, patching the configure script will fail because
it will have been regenerated during do_configure. We're patching
configure.ac so we don't need to patch configure anyway.
(From OE-Core rev: ae98a95577ba9c8a6a0d9a78d4cea33a92adff35)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Documentation.conf is used in WebHob to display
information strings about the collected variables.
This patch brings the file up-to-date with latest
information available from the manual.
(From OE-Core rev: b9743c7b130bda3e50cdba4cf260232f1c24abcd)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It causes shadow to be used in core-image-minimal and increase the
size by 1.5M. We will add the shutdown user to group via base-passwd
which we depend upon instead.
[YOCTO #5230]
(From OE-Core rev: e33e4c30a4fa5b98903d6a46cdcc5bca9cf50848)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since using useradd in sysvinit causes core-image-minimal to
gain shadow utilites instead of using busybox, we add the
shutdown group directly.
[YOCTO #5230]
(From OE-Core rev: 47ebf756efeb88727459165e00c16671854e19a9)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton
Nicolas Dechesne
Lei Liu
Mark Hatle
Jeffrey C Honig
Lei Liu
Ming Liu
Richard Purdie
Chen Qi
Saul Wold
Hans Beckerus
Wenzong Fan
Laurentiu Palcu
Chunrong Guo
Paul Eggleton
Jeffrey C Honig
Phil Blundell
Otavio Salvador
Bruce Ashfield
Khem Raj
Xufeng Zhang
Jackie Huang
Qiang Chen
Lu Chong
Jonathan Liu
Jason Wessel
Joao Henrique Ferreira de Freitas
Seth Bollinger
Søren Holm
Joe Slater
Andreas Müller
Gary Thomas
Roy Li
Konrad Scherer
Hongxu Jia
Andreas Oberritter
Christopher Larson
Michaël Burtin
Jack Mitchell
Ting Liu
Muhammad Shakeel
Nobuhiro Iwamatsu
Martin Jansa
Peter Kjellerstedt
Eric Bénard
Cristian Iorga
Tudor Florea
Nathan Rossi
Marius Avram
David Nyström
Stefan Stanacar
Amy Fong
Belen Barros Pena