All six manuals updated.
(From yocto-docs rev: 753e3eb80b1fa6148e12f9eb93d23f4613b6be05)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I discovered that the figures used in this manual differ depending
on the branch. There are two figures that are different. Thus,
the TARFILES variable in the makefile needed to be conditionalized.
If it is not, then the process that makes the tarball throws errors
because it cannot find the two figures from the other branch.
To fix this I introduced the 'BRANCH' variable. It is to be used
only when you make or publish the YP Development Manual. And, you
only use it to specify 'edison'. If you are building from the 'master'
branch you don't need to use it.
Comments in the file have been updated to explain usage.
(From yocto-docs rev: 0341b19f75176fd4133fd66cb5536b765edf0294)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I had added some edison-specific figures and they needed to
be included in the TARFILE variable for the YP development manual.
The fix now makes the TARFILE variable all-inclusive for all
.PNG files regardless of branch. Consequently, there can be
some missing files when the manual is made but the errors are okay.
I documented the exceptions above the variable.
(From yocto-docs rev: be731afde47dfc85da6ba88f93910899ec259e87)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Poor flow for the config_smp example. Upon reading this example
it did not stand well on its own. I added some text, albeit
redundant but necessary I felt, so that the example would stand on
its own.
(From yocto-docs rev: 1677a873e9bd1124a5ff0234edc1ee05938c19b0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I left "work" off the name of the copy of the clone repo
for the kernel example.
(From yocto-docs rev: 26f3dd9c82beb3c8d6e50c2132756bdb4b29b56d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example now uses an edison branch of the poky-extras repo.
Now that that is necessary, there needs to be explanation in the
example on setting that branch up after creating the local
repository.
(From yocto-docs rev: 70599a07a6efb0ae2da04baa43b5bb99c9ec4e5d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the names of the bare clone and copy of the bare
clone kernel repos changed in the example this figure needed
to be altered.
(From yocto-docs rev: e49ec4256bd9fe9f1193b70f8a5ab864c069c863)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changing the name of the bare clone and copy of the bare
clone for the appendix A (kernel) example affected this
figure of the file structure. I updated the figure, which
is now specific to 1.1.x and added it. I also had to remove
the figure that will now be specific to (master) work.
(From yocto-docs rev: 048af1a6945991c66abef72de05c136e8071a9e5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To make the kernel example more easily understood, Joshua Lock
suggested that the names used for the bare clone of the kernel
git repo and the copy of the bare clone be more different. So
I have changed the example such that the bare clone repo is
named linux-yocto-3.0-1.1.x.git and the copy of the bare clone
(or working repo) is named my-linux-yocto-3.0-1.1.x-work.
Note that this also implies the use of the linux-yocto_3.0-1.1.x
kernel and not the linux-yocto_3.0 kernel.
All the changes made here should take care of the example. I
did have to introduce a new figure that showed the kernel
repos based on the new names used in the example. Also, I had
to delete the other from this branch. The examples are now
diverging according to (master) work and 1.1.x work.
Reported-by: Joshua Lock <joshua.lock@intel.com>
(From yocto-docs rev: f4fdef6078fccfc2c72b6e0ad1dfae1f1ecb2aa6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The links to the 32-bit and 64-bit Python tarballs in
miscsupport were broken. I fixed them.
(From yocto-docs rev: 6dd820fe8e3d22329a4d6e4edcbba72bf70841c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a link that was still yoctoproject.org/downloads. I changed
to downloads.yoctoproject.org.
(From yocto-docs rev: 26c87f543c95efcd7e5a546b3cd0d0756a238fa5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bad wording fixed to describe the changes to PATH when the setup
script is run.
(From yocto-docs rev: 95c6049995e8b51a46ba7fba57fcc240b6baeaaf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The menu for the YoctoTools in Eclipse moved from underneath
"Windows" to the top level. I fixed the reference to reflect
that change in the GUI.
(From yocto-docs rev: 89830569107200f89d78e0b32b98429a947abe36)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the wording in an example to use "menu" instead of
the incorrect "navigator pane".
(From yocto-docs rev: d2ce174e8e427c279d90197eb896e1f4df183196)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a bit more information to the third step of the
example that reconfigures a project.
(From yocto-docs rev: d30a83e4f62015cbaba9e2532b7e69d1908dfb50)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed a redundant link to the QS manual.
(From yocto-docs rev: 20c898194511bd943ca2a93b1a4caad0466fccd9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I worked through these methods and discovered a bit more on how
they actually work and when the user would use a given method.
The updates reflect this new knowledge.
(From yocto-docs rev: 346652df7a3423b82a10d41aa2d7dcddb803ad6f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed redundant link for referencing a section of a different
manual.
(From yocto-docs rev: 44f4df93ead5c8d48dd536355770919871bdc283)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes reflect working through the chapter using the
1.1.1 release. Several areas needed tweaking.
(From yocto-docs rev: 566b8a492e502e88a1404f833db140a6408da592)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the PDF version of the reference guide there were several glossary
variables that did not format correctly. The issue is that the two-
column list had instances where the variable name overruns the
variable description. I added an extra line return for these cases.
(From yocto-docs rev: f3ff26568b371807986e4ba77fe41cba6875efcc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added text to show how to unpack the generated ADT Installer
tarball.
(From yocto-docs rev: b0cf4554d3dde3a018f8f7901162474cb423ea12)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes for the 1.1.1 release.
(From yocto-docs rev: 42ffeb43ea315b14e8b4668d3ab5ff8a16f1e7ac)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figure that shows the kernel repos needed the git push
command fixed. There was no ":" character in it.
(From yocto-docs rev: 69874766764788f08dc448b9835d41b6c67fcd8a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The file hiearchy was stale for the meta-crownbay examples in
recipes-graphics. I updated in two places.
(From yocto-docs rev: a16bf8ae56efb907a50fbe4c16be0adfeec5c275)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This example had gone stale. I cloned the meta-intel repo and
copied the edison branch version of the file into the manual.
(From yocto-docs rev: 963c53157f147c556cc4317f68fafeb0650268cc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example that shows menuconfig and where the .config file is
was updated to show the use of linux-yocto-3.0 kernel.
(From yocto-docs rev: a9f7a73842b428242da95f3dfe6a7b31c123ebc2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to update the figure again and I updated the surrounding
text.
(From yocto-docs rev: d3a0cb2b24dabdf4a022a7426aeb2b80b40ae544)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the picture that shows the index of releases. they renamed
this from index of downloads.
(From yocto-docs rev: 098648434311bbe6de68fbbf89486ee1f9c0e4ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is note instructing the user to delete unused .bbappend files
or comment out the COMPATIBLE_MACHINE statements in those unused
files before running the build in the example. the note was not
clear about the COMPATIBLE_MACHINE statement in the .bbappend file
that is actually being used. I edited the text to be clear about
that.
(From yocto-docs rev: 44277b9c5d8a77958a4220fa790bc13e9ce697b3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'dd' example needed updating for the output that shows the
size of the image.
(From yocto-docs rev: f7cee3f3b9ccf2760de182b3d545e8d53ef83786)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the console output created when you create the bare clone
and the copy of the bare clone.
(From yocto-docs rev: 73130ec4a785417c5b8a91c0b577ac3681562b77)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the console output returned when you set up the
poky-extras repo.
(From yocto-docs rev: f4a6bea21df8dc6df1c30288a6ea93218e7d614d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After building the BSP example the dd example command is being updated
with new image.
(From yocto-docs rev: ed9dc2a1af1c1160d03b0b12f06c91028120f177)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As Reported by Robert P. J. Day.
Robert was working through this BSP example in the development manual
and ran into some problems and some confusion in areas. This launched
a long "help-desk" session with Tom Zanussi. In addressing Robert's
issues, Tom decided to make a run through of the example as it was
written. For the most part the example was sound but needed some
technical tweaks as well as some expansion of the text to make things
clearer. Tom submitted the patch that addressed these concerns.
Scott Rifenbark reviewed the patch and further modified some of the
writing to make it consistent with the existing writing in the manual.
(From yocto-docs rev: b95b9077bce1de55da4c0fc6208e2f2dac10c1e5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For some reason the example for the "Changing recipes-bsp" section
mysteriously had the wrong first command in the example to prepare
this stuff. The example was removing something in the recipes-graphics
area. Don't ask me how it got there. I checked through the commits
in the Edison branch and can't find the change. It could have happened
during 1.1.1 scrub.
Anyway, I have fixed the 'rm' command to be appropriate for the
example, which works with recipes-bsp.
(From yocto-docs rev: a53d46b5f0dbbdfac902abc5844085bee3aeb6d9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Verifying the 1.1.1 release and creating the local repo of meta-intel.
The console output is significantly different. I have updated the
returned console output.
(From yocto-docs rev: 653e1214861e98501d37543403c5324c4d153112)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a couple more occurrences of old links to the machines
area of the downloads. Fixed them.
(From yocto-docs rev: 276352d49612bf77ed9e828c54bc1bc008345839)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed a couple of links for the yocto-1.1.1/machines area. These
links were old and pointing to yoctoproject.org/downloads. They
are now changed to http://downloads.yoctoproject.org/releases..
(From yocto-docs rev: cee9d5eb0b095ba647411abaf12f591e216e461f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a link that had a spacing problem and should not have
been linking to the manual in general. Fixed the spacing problem
and removed the links to the book in general.
(From yocto-docs rev: 0894e05dfa59b08f5c4e29a5aafbc2e5487f442c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found another broken link to the Git documentation. They must have changed
this stuff up. So I set the link to point to the appropriate area in
the Git Community Book. Talks about distributed workflows.
(From yocto-docs rev: b668c8c65fdc51e0100e9ddd1c54e4926579bbe2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
there was a link to some Git documentation referencing workflows that
apparently had gone stale. I replaced the reference with a link to
the Git Community Book.
(From yocto-docs rev: 3a21f7454ec04e082d58646eecc1cffe3caa046c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Git Workflow was missing a pull line from the second (bottom) contrib
box into the project's master Git repository. I added the line.
(From yocto-docs rev: 3988e0197a7e3a6cde647f01da9ae41fd9465c75)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the top-level directory created from unpacking the
edison-6.0.1 tarball from 'poky-1.1.1' to
'poky-edison-6.0.1'.
(From yocto-docs rev: 7af332806f1f4952f8e7672243d077e4ecde7fc5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed to change the "6.0" occurences to "6.0.1" in the examples.
(From yocto-docs rev: d6b40b3b0e98eba7f3221e79cb9612f8f10bffaf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The pre-built section had a couple errors I discovered while trying
to verify the 1.1.1 release. One is a wording problem putting the
last set of commands into context. the other is that i needed
i586 as the expanded environment file in /opt/poky.
(From yocto-docs rev: d173f82e3e368b54889d6c1aa9bd51340e7e42be)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updates to 6.0 to make them 6.0.1 for the 1.1.1 release.
(From yocto-docs rev: 19c8fb554c620d78edc7a0330e76e31a2a374ad2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Decision made to treat every release like a major release.
This caused a scrub through the manual for the string "1.1"
and "6.0" and changed to "1.1.1" and "6.0.1".
(From yocto-docs rev: 3bd37946985b5a38860a61887d0bac4930c7cde1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Tom Zanussi