Change the wget fetcher to not emit the commands output when calling checkstatus, this
matches the behaviour of the git fetchers checkstatus() method.
(Bitbake rev: 5896d8ff7bcf85b3bab20fc27c4c15e87f86b4d9)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake -s was not displaying correct version information when the
PREFERRED_VERSION string contains other variables. The actual built
versions would differ since the providers.py functions were called
with expanded keys at this point.
This patch expands keys for showVersions bringing everything into
sync correctly.
[YOCTO #1493]
(Bitbake rev: 3a0f2dda3c6de993f08ed50e9d513add9407339c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the user saves their recipe based on an existing image type, loads it
in a newly run hob instance and clicks bake they should not be asked about
building packages vs an empty image up.
Partially addresses [YOCTO #1468]
(Bitbake rev: f4be83aae77a713e2b5a2d094651639b6e641031)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It doesn't matter if we can't remove the temprorary file, for some reason,
so catch the exception and ignore it.
Partially addresses [YOCTO #1468]
(Bitbake rev: 4394e38b038e1bc9845adf01d73363157d98c96d)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's no need to check the BBPATH and BBFILES are set correctly each
build when running multiple builds for one launch of the UI.
Partially addresses [YOCTO #1468]
(Bitbake rev: 39ed18e70e9f3a13b522b4ea02bf6f4bdb7de89c)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It seems we have a race whereby the image_dir variable may not be set
before it's tested for, since the variable is always the same set it in the
initialiser.
Partially addresses [YOCTO #1468]
(Bitbake rev: 09f5aed2edb0b8f4a6570e1041b5db66cf2d17cc)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, variables can be set to one thing in one part of the environment and something
different in another part. This change ensures the datastore and the environment
are consistent.
(Bitbake rev: 459addf13721a6847406f215650fa1882fb83ea9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes two problems:
a) Variables which were in the parent environment but not set as "export"
variables in the datastore could end up in the task environment
b) oe.environ.update() can't cope with the generator returned by
bb.data.exported_vars()
Whilst the updated code isn't as neat, it does do the expected thing,
sets the environment correctly and stops unwanted values leaking into
the task environment.
(Bitbake rev: 67e5e23034c5ec2b9efcca935242830306c0048d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OpenEmbedded is expecting to get a string from get_taskhash, but noop siggen
returns just 0 (number), so OE classes/sstate.bbclass barfs badly. Fix that.
(Bitbake rev: 24272dae15ccf641ece11ef5a6e2bfa3ebb6f5f9)
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some internal lists were not being cleared, resulting in incorrect
program flow on the second build, causing a structure to be accessed
incorrectly which resulted in a segfault.
Fixes [YOCTO #1332]
(Bitbake rev: 71ac7fda51ed80e9ef6d1a3bca653683893e4770)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you don't clear out files_to_clean after the files get deleted and
then you run a second build, it will try to delete the files from the
first build and you will get a "No such file or directory" error.
(Bitbake rev: 069d85cde01d14f8da31ad5cbd843a4d99628d42)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's felt that the stability of package deselection is not sufficient for
the upcoming release and thus package removal should be disabled.
I'd actually like to see this patch, or its effects, reverted as soon as
the release bits have been frozen so that this issue can continue to be
worked on.
(Bitbake rev: 73b6ff4654d10baae59d83e8568d58d989e99dd7)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The buildstats handler causes an exception with: "'NoneType' object has no
attribute 'startswith'" early a build via hob, leaving a glaring red row
which means nothing to the user.
Mask this error until such a time as we have opportunity to correctly
diagnose and fix the root problem.
Workaround fix for [YOCTO #1433]
(Bitbake rev: b0cce5b52a20c0dad5ec0c4053f437cae89b6137)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The generic meta-toolchain-sdk we are currently building when this option
is enabled is likely unsuitable for the majority of images built with hob.
Remove this option from the Preferences UI until such a time as we can
correctly implement this feature to include the library headers for the
selected packages.
Addresses [YOCTO #1302]
(Bitbake rev: 3157967d08266b8d1ac563ba609ac3027b60d040)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
hob requires pre and post configuration files to store configuration values
in, whilst this should (and will) be fixed long-term for so long as we
require these files we should alert the user should they run without them.
Fixes [YOCTO #1383]
(Bitbake rev: bb3e9113074ea1254aa03a247a1a1070682df9c8)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If no value is set for DISTRO the defaultsetup policy is used, reflect this
in the UI by having defaultsetup selected in the Distribution combo when no
other DISTRO is set.
(Bitbake rev: 126267c545ede65042959d134ea75c0345577747)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to set various variables *before* parse begins, the simplest way
to ensure this is to use a pre configuration file for the relevant
configuration entries.
This series adapts hob to use both pre and post files to store its
configuration. Any variables which affect initial parse are set in the pre
file and all others in the post file.
Unfortunately this requires hob related code to have even more hard-coded
data as to what is relevant but this is the simplest way to solve issues
with variables and parse order at this time.
Addresses [YOCTO #1281]
(Bitbake rev: 02ab0e11d8dd42f5ca440b3d8d2073e23f55113a)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: 639db8c766cada7180f9447f51303f9b30d7e817)
Signed-off-by: Holger Hans Peter Freyther <holger@moiji-mobile.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a user has a ~/.gitconfig file, git fetch --all will reference it. To avoid
this we should run git fetch with an explicit url telling it to fetch all
references (which includes tags).
I'm assured this means git won't reference the file, see the discussion on the
git mailing list (subject Overriding ~/.gitconfig using GIT_CONFIG).
[YOCTO #1134]
(Bitbake rev: 8540c09d4e509e3277940464c71174d8a0aca6ab)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If metadata contains:
"""
FOO = "bar"
"""
The variable FOO should get set to "bar" but doesn't due to the empty lines
be swallowed by the parser and FOO becomming part of the multiline comment.
This patch corrects that behaviour so FOO is set as expected.
[YOCTO #1377]
This patch fixes parsing of multiline comments so lines ending with \
behave consistently and we warn users where there is something happening
they likely don't expect.
(Bitbake rev: 30eaef7f50fff855cf8830772a7088dd83a4240e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than trying to iterate the model to find whether the item is already
included and then iterate the model again to find the items path attempt to
find the path first and if the path is found test whether the COL_INC of
the row is set.
(Bitbake rev: 82845569c37591f6b097b9db071484f8171a39ea)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cheaper to set COL_INC to True regardless of whether it's already set.
(Bitbake rev: 12c6f98ba7a68baeeaee00594d910e1be8d55d87)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than calling get_path() for each iterated value use the get_value()
method to lookup the COL_NAME value and only call get_path() for a match.
This should save some time by potentially removing N-1 calls to get_path()
from the loop.
(Bitbake rev: d2450536269996147a22d6eafbdf72aa62afa4f6)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't add y to x's COL_BINB if x is in y's COL_BINB - prevent circular
dependencies.
Further this patch improves the variable naming to make this code easier to
follow.
Fixes [YOCTO #1423]
(Bitbake rev: 01ef2ab0d201f3cb3666462558c9cf485592e04f)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the same vein as a similar, earlier, patch where I missed the second
loop which modifies the binb column.
Fixes [YOCTO #1420]
(Bitbake rev: 6ad1103b5fd592afa9ea03ef5a0d706604cc0e0f)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if passing expand=True to getVar() function, it will pass the
handling to getVarFlag(), which doesn't get any benefit from the expand
cache.
Call the expand() function separately in getVar() to make use of the
expand cache, which can decrease the parsing time by 40%.
(from current 49s to 27s)
(Bitbake rev: 6555a77c199f41bf35460138764e03e30c56d29f)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add another item to the right-click menu enabled for log messages to copy
the message to the clipboard.
(Bitbake rev: 419b52e832f506504778d4d5957d1e77477bb513)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It doesn't make sense to be able to modify the preferences and add/remove
layers whilst a build is in progress - disable the relevant menu items once
the build has started and re-enable them once the user has returned to the
creation view.
(Bitbake rev: 0423587db09f6f28cf9d801f5657a84157f42dbe)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes an embarassing typo which meant the method actually returned a
list of packages which didn't depend on the passed pn.
(Bitbake rev: a17334e85869bf78d63df1b2336d68980a0b359f)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was actually broken with recent changes as the values were never
persisted to a file (meaning they were unset on the server at reparse
despite the UI indicating they were set).
However, I've chosen to remove the 'feature' as pegging a users CPU without
them asking to use high thread counts seems a little offensive.
(Bitbake rev: 27dcf245abf3805be47894773406392fdf055e48)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use git ls-remote to implement checkstatus command for the git fetcher.
(Bitbake rev: 0ed281feb6d244d3700da484f4e83394ae394f93)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If IMAGE_FSTYPE is empty and the user has opted to build an image warn
them and prevent the build.
Fixes [YOCTO #1267]
(Bitbake rev: 023edbe6d04f25c7e0e7b615eb06cd3727c665cb)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were setting the value as a list when a string is expected
(Bitbake rev: fc3bb3a4f04f64c6d47c7bf040b7522e9204a458)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These methods are expected to return lists.
(Bitbake rev: 4e101de9034c20dfda0bb851e84f4315335620f6)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the models new get_selected_pn method to return a list of PN's for the
selected items and pass that for a package only build, rather than passing
a list of package names (which buildTargets can't handle).
Fixes [YOCTO #1385]
(Bitbake rev: c969857c7f5963098e6584803eafb4e2be0eea46)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that we've switched to packages in the model, rather than PN, it makes
sense to add an extra field to store the PN of the package.
This patch includes a convenience method to retrieve a list of selected PN's.
(Bitbake rev: cf79424592a81378de5edad11cf6c4f427c94bcc)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user hasn't made any selections inform them that they need to do so
before clicking Bake.
Fixes [YOCTO #1384]
(Bitbake rev: e176dcf637da2d0105a4361a46d5df5238e3b8ce)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes it easier for the user to determine what the effects of a
removal may be, further it means we no longer need the find_alt_dependency
method which could be a fairly time-consuming method depending on the size
of the contents table.
Partially addresses [YOCTO #1365]
(Bitbake rev: 91d1f5f5a44c80e6702221509e2e9aadbe05bcc0)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure the dependency list is uniquified, doesn't include self references
and further doesn't include -dev references.
(Bitbake rev: 70aebebc3867d52e460355667e711c7c6dcd50ce)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Relying on the count() method of Str to determine whether the string
contains a substring is error prone purely because the return value doesn't
strictly convert to a Boolean value.
To that end take the more pythonic approach of using the in operator (foo
in bar) to check for the substring.
Further, add a helper method for the common case of testing whether a pn
is -native, -cross or virtual/
(Bitbake rev: d7768cefcddd59a5102d7e9b67e4416bf8603f55)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we receive the CacheLoadComplete command we need to ensure the
progress bar is hidden as we can't expect the ParseComplete event, where
this would usually be done.
This patch makes the Goggle UI usable again.
(Bitbake rev: 64dfc574c12d882761e4958c8b1881cd47a87e0d)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recent change to the message module to remove custom logging domains
resulted in an increased number of messages being displayed in the
running build view, ignore all messages lower than log level INFO.
(Bitbake rev: a12da000a8e4138fbdfd77f9c49b11fc69a315e1)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recent change which modified inheritFromOS to use the intial
environment, rather than the current environment, introduced a bug such
that variables which had been cleaned from the environment where still set
in the data store.
This patch changes things such that a list of approved environment
variables is saved after the environment is cleaned and only the variables
in this list are inherited in inheritFromOS.
CC: James Limbouris <james.limbouris@gmail.com>
CC: Chris Larson <clarson@kergoth.com>
(Bitbake rev: cb6c07054e8baf94614713ec257c643b22266d75)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch removes the majority of the domain related code from bb.msg
on the grounds that we now support dynamic creation of logging domains
so having this hardcoded is just error prone and less flexible. It also
makes the msg code overly and needlessly complex.
It also removes the bb.msg.debug/note/warn/plain/error functions since
we might as well remove them rather than try and fix them at this point.
(Bitbake rev: 7627b561cbcb1482b464d69db70f38ea663180f3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make show_layers print layer name, path, and priority in a simple table
rather than just the value of BBLAYERS.
(Bitbake rev: 29afbf10c00b5ccdd8d2c063dda3f3e2b6aa1624)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The INFO: prefix makes sense in bitbake itself but in bitbake-layers is
just noise. Changing this exposed the fact that the logger was not being
set up correctly (which should be done anyway to correctly support
logging from BitBake), so this has also been fixed.
[RP: Sync with logging changes]
(Bitbake rev: 79751524cb1f0388975c6228f8c112e6af80f154)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of running show_appends when no command is specified, show the
default help text. Running show_appends by default made sense previously
when that was the only real command provided, but now we have several
useful commands implemented.
(Bitbake rev: 62a2e0aa1ac8a459928d1f72783b6ca9c1756350)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improve default help output and make unrecognised commands print it out
rather than just an error.
(Bitbake rev: 84f20eb874e7e0ae59bc76883ba9698b0cfcdb6b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No need to check if the name ends with -native or -cross as path will be
None in this instance.
(Bitbake rev: bca739cdf55ba2a1c5e372e512d4f088345f245f)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ignore names that include '-cross', rather than just 'cross'
(Bitbake rev: 06abfc9caf7f237a6bb762fb3ae9f3dec99688ca)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the item_name contains virtual/, -native or -cross it won't be present
in the model. Return None early in this circumstance rather than iterating
the entire model and still returning None.
(Bitbake rev: aeef5a4b3999bd924e89e7738efe24f80ae94fd0)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Until now the hob UI has only contained recipe (pn) level targets in the
data store, this patch switches to including package level information.
This is slightly slower in all model related cases (more entries) but gives
much more flexibility for image customisation.
(Bitbake rev: 049927e99c8d1db7273fbd179b2614bd2ea9403b)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At the moment it bugs me a lot that we only have one effective logging
level for bitbake, despite the logging module having provision to do
more advanced things. This patch:
* Changes the core log level to the lowest level we have messages of
(DEBUG-2) so messages always flow through the core logger
* Allows build.py's task logging code to log all the output regardless
of what output is on the console and sets this so log files now
always contain debug level messages even if these don't appear
on the console
* Moves the verbose/debug/debug-domains code to be a UI side setting
* Adds a filter to the UI to only print the user requested output.
The result is more complete logfiles on disk but the usual output to the
console.
There are some behaviour changes intentionally made by this patch:
a) the -v option now controls whether output is tee'd to the console.
Ultimately, we likely want to output a message to the user about where the
log file is and avoid placing output directly onto the console for every
executing task.
b) The functions get_debug_levels, the debug_levels variable, the
set_debug_levels, the set_verbosity and set_debug_domains functions are
removed from bb.msg.
c) The "logging" init function changes format.
d) All messages get fired to all handlers all the time leading to an
increase in inter-process traffic. This could likely be hacked around
short term with a function for a UI to only request events greater than
level X. Longer term, having masks for event handlers would be better.
e) logger.getEffectiveLevel() is no longer a reliable guide to what
will/won't get logged so for now we look at the default log levels instead.
[YOCTO #304]
(Bitbake rev: 45aad2f9647df14bcfa5e755b57e1ddab377939a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In verbose mode there are hundreds of these "checking PREFERRED_PROVIDER_%s"
messages, cluttering the output and obscuring the more important resulting
"selecting %s to satisfy runtime %s due to %s" messages. Individual "checking"
lines are more suited for debug mode, similar to "sorted providers for %s
are: %s", hence convert logger.verbose() to logger.debug().
(Bitbake rev: 85dfbec26abb5b944758f5c4749b7df16c0fb2e6)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to unset the reload_required variable once we've triggered a reload
so that we don't cause a reload each time the preferences dialog is shown and
dismissed, regardless of whether anything has changed.
(Bitbake rev: b3ad7acebfad3063c3364f4492f53b25bf53cf81)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Configuration files are written in several places, this refactors the code
to use a common method.
(Bitbake rev: 2843645755abb736220d7404dc6e853929093ff9)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The API has changed from just a reparse call to a reset call followed by
a reparse call.
(Bitbake rev: c828ba571c3cf27d1bbd65184e287c45ef64de89)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Turn the reparseFiles logic into a command to reset the cooker's state
machine and a noop which triggers a cache rebuild.
The resetCooker command resets the cookers state machine such that a cache
update will be triggered by any async command which requires the cache.
The reparseFiles command remains as a noop async command that has the
needcache property set to True so that when called it ensures the cache is
built.
Patch from Richard with the addition of removing the force parameter from
the updateCache method.
CC: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: a98f698fe9f38310024013e58475e6d1447ee154)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using the -e and -b options together an expection was occuring.
This was due to incorrect initialisation and this patch adds in the
correct initialisation calls.
(Bitbake rev: e7ade6dcd646b478df79f968934a0edcb63254f7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bNeedUpdate variable doesn't reflect its purpose, and doesn't match
coding style (type encoded in variable name, camel case) - rename to
cache_ok.
(Bitbake rev: cc4158db215493ac270e27f92d977bcbe337f3db)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix thinko - the squish method returns a uniquified list, it doesn't modify
the list in place. Therefore the call to squish() was useless as its return
value was never assigned.
(Bitbake rev: 93bae8f223cdeb7b7e31c309b5d785b97ae1c2ac)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two similarly named variables in the mark() method resulted in the wrong
variable being used in a couple of places. This patch adresses this in
several ways:
1) Renames the variables to be less similar
2) Uses the correct variables
3) Adds some coments to document the methods intent
Partially addresses [YOCTO #1355]
(Bitbake rev: ba9f2fe496eec0a221b563ffc9bb76eca592192f)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the requested configuration file is found on disk check the
against the configuration files in __depends/__base_depends to ensure the
file was parsed before emitting the ConfigFilePathFound event.
If the requested file wasn't parsed just return (and don't emit).
Fixes [YOCTO #1246]
(Bitbake rev: 705d14d1e1108e0544c7eab827f1242f0839add9)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, if checksum mismatch, fetcher will try mirror,
and if mirror fetching fail, it will show error "Unable
to fetch URL xxx from from any source" which actually
hide the real reason and make user confuse.
so showing warning message will make it more clear.
Fix [YOCTO #1256]
(Bitbake rev: b3e924297d670963714343d02f7898798fec84fd)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When running bitbake in -k mode, the last command might succeed but we
still need to preserve any previous failure codes.
(Bitbake rev: 3ad3a53545b37ee8b26b22f4a0e00b19615b449a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a No Provider error is shown we need to set the exit code to
show an error occured too.
[YOCTO #1322]
(Bitbake rev: 4d4e01aa3e38d809617e8c1bbaa081182a2308a0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The data-generated and model-updated signals are different, the model
should only be accessed *after* the model-updated signal. Move code
setting the image combo's backing model to the model-updated callback to
ensure the combo is accurately set when changing the machine with an
image selected.
(Bitbake rev: 46953d3b4595667935d43fe7b20264ae0efd1bdf)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's possible to trigger an infinite recursion when removing a package
where many of the dependencies share their dependencies. Prevent this by
keeping a list of removed item names and only removing the item when it's
not in the list.
Addresses [YOCTO #1319]
(Bitbake rev: 0ed58f28e869cceeefa930a3f1f46c5f3e9ffe21)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The include parameter to _parse() tells the parser whether to include the
file in __base_depends, the contents of which have their mtime tested to
invalidate the cache when they have changed.
As I understand it we would want all of the configuration files that are
currently handled with the _parse() method to invalidate the cache to set the
default value of the include parameter to True.
(Bitbake rev: 5cacdc4f1641eda1b5707c96f7c40924a9db6174)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The HobEventHandler passes events on to RunningBuild when a build is in
progress. This patch resets the HobEventHandler to handle events when the
build is complete.
(Bitbake rev: 3d66d4e64a6352c01662a24ee957eddcd3fde7fc)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Find returns -1 if the substring isn't found, so checking for the
Truthiness of the return value is insufficient. An INCOMPATIBLE_LICENSE
value which only includes GPLv3 will cause find to return 0, for example.
Fixes [YOCTO #1320]
(Bitbake rev: 28c71e63355ca94402a9049b8a07046e7b460026)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Emit the generic build-complete signal when a command fails with an exit
signal enabling the UI to update itself accordingly.
Addresses [YOCTO #1265]
(Bitbake rev: 25ec13075855f7e321a9763682a8cd4ca09203cd)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Addresses the second part of [YOCTO #1311]
(Bitbake rev: d790386112b0beb444713a12d766bd4bd3441f56)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In b947e7aa405966262c0614cae02e7978ec637095 Bob started to introduce code
for a right-click menu, whilst most of the code is non-invasive it does
enable the editable property of the gtk.TreeView which can be confusing.
This change adds a readonly parameter, defaulting to False, to the
RunningBuildTreeView which if True will prevent the editable property from
being set.
CC: Bob Foerster <robert@erafx.com>
(Bitbake rev: d1d6bfab1789d8c0a4faa109bcc06b3cefe62620)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the new sequential option of RunningBuild to ensure this.
Fixes the first part of [YOCTO #1311]
(Bitbake rev: 972769e6362ea3cf35c8fb7cdfbb147758d0a2f2)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In b947e7aa405966262c0614cae02e7978ec637095 Bob changed the behaviour of
the RunningBuildModel such that the items are added to the model in a
non-sequential order.
The messages in the view being listed out of order from how they are
received is undesirable for users of the hob UI, therefore this patch adds
an optional sequential parameter to the RunningBuild initialiser which,
when set to True, will always append new messages so that the order shown
in the view is that the messages are received in. The parameter defaults to
to False such that the behaviour added by Bob is preserved.
Partially addresses [YOCTO #1311]
CC: Bob Foerster <robert@erafx.com>
(Bitbake rev: b16663e1919fddbf63d0ca7f9ad3ffdc7d1121fd)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move temp directory handling into the HobEventHandler and clean up the
temporary files on program close.
Fixes [YOCTO #1307]
(Bitbake rev: 1009ca570a750a00b0e60afcc30ead070c7b310a)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When adding a layer fails try to explain why to the user.
(Bitbake rev: 2f7eadfdd710f84a299d6fc7be67ddb089f03ecc)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use different return types when adding failed versus when the layer is
already enabled.
(Bitbake rev: 906854d75a12c8752efb1e4065eaf1a10b191612)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a CommandFailed event is seen emit a signal with the error message.
(Bitbake rev: 15cc4fe5051dcb6ac5915e10228b5f3d3ed845bd)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we receive the fatal-error signal from the handler display a dialog
informing the user of an error and displaying the error message. Dismissing
the dialog quits the application.
Fixes [YOCTO #1279]
(Bitbake rev: 04dbd80bbc9ffe2a566b8cc488f0feebadcdde60)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joshua Lock
Christopher Larson
Richard Purdie
Dmitry Eremin-Solenikov
Paul Eggleton
Holger Hans Peter Freyther
Dongxiao Xu
Denys Dmytriyenko
Yu Ke
Jessica Zhang