Add overo

git-svn-id: https://svn.o-hand.com/repos/poky/trunk@5477 311d38ba-8fff-0310-9ca6-ca027cbcb966

meta/conf/distro/include/poky-eabi.inc

@@ -18,6 +18,7 @@ GCCVERSION_qemuarmv7 = "4.3.1"
 GCCVERSION_beagleboard = "4.3.1"
 GCCVERSION_omap-3430sdp = "4.3.1"
 GCCVERSION_omap-3430ldp = "4.3.1"
+GCCVERSION_overo = "4.3.2"
 # 4.2.3+csl-arm-2008q1-126 doesn't work
 
 BINUVERSION = "2.18"

meta/conf/machine/overo.conf

@@ -0,0 +1,37 @@
+#@TYPE: Machine
+#@NAME: overo machine
+#@DESCRIPTION: Machine configuration for the overo
+
+include conf/machine/include/tune-cortexa8.inc
+
+TARGET_ARCH = "arm"
+PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5te armv6 armv7 armv7a"
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat alsa"
+
+PREFERRED_VERSION_u-boot = "git"
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-omap3"
+KERNEL_IMAGETYPE = "uImage"
+MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
+SERIAL_CONSOLE = "115200 ttyS2"
+
+IMAGE_FSTYPES += "tar.bz2 jffs2"
+EXTRA_IMAGECMD_jffs2 = "-lnp "
+EXTRA_IMAGEDEPENDS += "u-boot-omap3 x-load"
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive"
+#XSERVER = "xserver-xorg \
+#           xf86-input-evdev \
+#           xf86-input-mouse \
+#           xf86-video-fbdev \
+#           xf86-input-keyboard"
+
+XSERVER = "xserver-kdrive-fbdev"
+
+GUI_MACHINE_CLASS = "bigscreen"
+
+ANGSTROM_URI = "http://www.gumstix.net"
+
+

meta/packages/linux/linux-omap3-git/beagleboard/flash.patch

@@ -0,0 +1,558 @@
+diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
+index 13d0043..d582b8f 100644
+--- a/arch/arm/mach-omap2/Makefile
++++ b/arch/arm/mach-omap2/Makefile
+@@ -44,7 +44,8 @@ obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o \
+ 					   board-omap3evm-flash.o
+ obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o \
+ 					   usb-musb.o usb-ehci.o \
+-					   hsmmc.o
++					   hsmmc.o \
++					   board-omap3beagle-flash.o
+ obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
+ 					   hsmmc.o \
+ 					   usb-musb.o
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-flash.c b/arch/arm/mach-omap2/board-omap3beagle-flash.c
+new file mode 100644
+index 0000000..5346df0
+--- /dev/null
++++ b/arch/arm/mach-omap2/board-omap3beagle-flash.c
+@@ -0,0 +1,119 @@
++/*
++ * board-omap3beagle-flash.c
++ * 
++ * Copyright (c) 2008 Texas Instruments
++ *
++ * Modified from board-omap3evm-flash.c
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/nand.h>
++#include <linux/types.h>
++#include <linux/io.h>
++
++#include <asm/mach/flash.h>
++#include <asm/arch/board.h>
++#include <asm/arch/gpmc.h>
++#include <asm/arch/nand.h>
++
++#define GPMC_CS0_BASE  0x60
++#define GPMC_CS_SIZE   0x30
++
++static struct mtd_partition omap3beagle_nand_partitions[] = {
++	/* All the partition sizes are listed in terms of NAND block size */
++	{
++		.name		= "X-Loader",
++		.offset		= 0,
++		.size		= 4*(64 * 2048),	
++		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
++	},
++	{
++		.name		= "U-Boot",
++		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
++		.size		= 15*(64 * 2048),
++		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
++	},
++	{
++		.name		= "U-Boot Env",
++		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
++		.size		= 1*(64 * 2048),
++	},
++	{
++		.name		= "Kernel",
++		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
++		.size		= 32*(64 * 2048),
++	},
++	{
++		.name		= "File System",
++		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
++		.size		= MTDPART_SIZ_FULL,
++	},
++};
++
++static struct omap_nand_platform_data omap3beagle_nand_data = {
++	.parts		= omap3beagle_nand_partitions,
++	.nr_parts	= ARRAY_SIZE(omap3beagle_nand_partitions),
++	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
++	.nand_setup	= NULL,
++	.dev_ready	= NULL,
++};
++
++static struct resource omap3beagle_nand_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device omap3beagle_nand_device = {
++	.name		= "omap2-nand",
++	.id		= -1,
++	.dev		= {
++		.platform_data	= &omap3beagle_nand_data,
++	},
++	.num_resources	= 1,
++	.resource	= &omap3beagle_nand_resource,
++};
++
++
++void __init omap3beagle_flash_init(void)
++{
++	u8 cs = 0;
++	u8 nandcs = GPMC_CS_NUM + 1;
++
++	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
++
++	/* find out the chip-select on which NAND exists */
++	while (cs < GPMC_CS_NUM) {
++		u32 ret = 0;
++		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
++
++		if ((ret & 0xC00) == 0x800) {
++			printk(KERN_INFO "Found NAND on CS%d\n", cs);
++			if (nandcs > GPMC_CS_NUM)
++				nandcs = cs;
++		}
++		cs++;
++	}
++
++	if (nandcs > GPMC_CS_NUM) {
++		printk(KERN_INFO "NAND: Unable to find configuration "
++				 "in GPMC\n ");
++		return;
++	}
++
++	if (nandcs < GPMC_CS_NUM) {
++		omap3beagle_nand_data.cs = nandcs;
++		omap3beagle_nand_data.gpmc_cs_baseaddr = (void *)(gpmc_base_add +
++			GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
++		omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
++
++		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
++		if (platform_device_register(&omap3beagle_nand_device) < 0)
++			printk(KERN_ERR "Unable to register NAND device\n");
++	}
++}
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index c992cc7..99e042e 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -94,6 +94,7 @@ static void __init omap3_beagle_init(void)
+ 	hsmmc_init();
+ 	usb_musb_init();
+ 	usb_ehci_init();
++	omap3beagle_flash_init();
+ }
+ 
+ arch_initcall(omap3_beagle_i2c_init);
+diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
+index 3d5e432..02b9ced 100644
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -71,7 +71,7 @@ config MTD_NAND_AMS_DELTA
+ 
+ config MTD_NAND_OMAP2
+ 	tristate "NAND Flash device on OMAP 2420H4/2430SDP boards"
+-	depends on (ARM && ARCH_OMAP2 && MTD_NAND)
++	depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3)
+ 	help
+           Support for NAND flash on Texas Instruments 2430SDP/2420H4 platforms.
+ 
+diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
+index 3b7307c..3aac1d2 100644
+--- a/drivers/mtd/nand/omap2.c
++++ b/drivers/mtd/nand/omap2.c
+@@ -111,15 +111,6 @@
+ static const char *part_probes[] = { "cmdlinepart", NULL };
+ #endif
+ 
+-static int hw_ecc = 1;
+-
+-/* new oob placement block for use with hardware ecc generation */
+-static struct nand_ecclayout omap_hw_eccoob = {
+-	.eccbytes = 12,
+-	.eccpos = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13},
+-	.oobfree = {{16, 32}, {33, 63} },
+-};
+-
+ struct omap_nand_info {
+ 	struct nand_hw_control		controller;
+ 	struct omap_nand_platform_data	*pdata;
+@@ -133,6 +124,13 @@ struct omap_nand_info {
+ 	void __iomem			*gpmc_cs_baseaddr;
+ 	void __iomem			*gpmc_baseaddr;
+ };
++
++/*
++ * omap_nand_wp - This function enable or disable the Write Protect feature on
++ * NAND device
++ * @mtd: MTD device structure
++ * @mode: WP ON/OFF
++ */
+ static void omap_nand_wp(struct mtd_info *mtd, int mode)
+ {
+ 	struct omap_nand_info *info = container_of(mtd,
+@@ -189,11 +187,11 @@ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+ }
+ 
+ /*
+-* omap_read_buf - read data from NAND controller into buffer
+-* @mtd: MTD device structure
+-* @buf: buffer to store date
+-* @len: number of bytes to read
+-*/
++ * omap_read_buf - read data from NAND controller into buffer
++ * @mtd: MTD device structure
++ * @buf: buffer to store date
++ * @len: number of bytes to read
++ */
+ static void omap_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+ {
+ 	struct omap_nand_info *info = container_of(mtd,
+@@ -207,11 +205,11 @@ static void omap_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+ }
+ 
+ /*
+-* omap_write_buf - write buffer to NAND controller
+-* @mtd: MTD device structure
+-* @buf: data buffer
+-* @len: number of bytes to write
+-*/
++ * omap_write_buf - write buffer to NAND controller
++ * @mtd: MTD device structure
++ * @buf: data buffer
++ * @len: number of bytes to write
++ */
+ static void omap_write_buf(struct mtd_info *mtd, const u_char * buf, int len)
+ {
+ 	struct omap_nand_info *info = container_of(mtd,
+@@ -250,10 +248,16 @@ static int omap_verify_buf(struct mtd_info *mtd, const u_char * buf, int len)
+ 	return 0;
+ }
+ 
++#ifdef CONFIG_MTD_NAND_OMAP_HWECC
++/*
++ * omap_hwecc_init-Initialize the Hardware ECC for NAND flash in GPMC controller
++ * @mtd: MTD device structure
++ */
+ static void omap_hwecc_init(struct mtd_info *mtd)
+ {
+ 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ 							mtd);
++	register struct nand_chip *chip = mtd->priv;
+ 	unsigned long val = 0x0;
+ 
+ 	/* Read from ECC Control Register */
+@@ -264,16 +268,15 @@ static void omap_hwecc_init(struct mtd_info *mtd)
+ 
+ 	/* Read from ECC Size Config Register */
+ 	val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG);
+-	/* ECCSIZE1=512 | ECCSIZE0=8bytes | Select eccResultsize[0123] */
+-	val = ((0x000000FF<<22) | (0x00000003<<12) | (0x0000000F));
++	/* ECCSIZE1=512 | Select eccResultsize[0-3] */
++	val = ((((chip->ecc.size >> 1) - 1) << 22) | (0x0000000F));
+ 	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG);
+-
+-
+ }
+ 
+ /*
+- * This function will generate true ECC value, which can be used
++ * gen_true_ecc - This function will generate true ECC value, which can be used
+  * when correcting data read from NAND flash memory core
++ * @ecc_buf: buffer to store ecc code
+  */
+ static void gen_true_ecc(u8 *ecc_buf)
+ {
+@@ -289,8 +292,12 @@ static void gen_true_ecc(u8 *ecc_buf)
+ }
+ 
+ /*
+- * This function compares two ECC's and indicates if there is an error.
+- * If the error can be corrected it will be corrected to the buffer
++ * omap_compare_ecc - This function compares two ECC's and indicates if there
++ * is an error. If the error can be corrected it will be corrected to the
++ * buffer
++ * @ecc_data1:  ecc code from nand spare area
++ * @ecc_data2:  ecc code from hardware register obtained from hardware ecc
++ * @page_data:  page data
+  */
+ static int omap_compare_ecc(u8 *ecc_data1,	/* read from NAND memory */
+ 			    u8 *ecc_data2,	/* read from register */
+@@ -409,6 +416,14 @@ static int omap_compare_ecc(u8 *ecc_data1,	/* read from NAND memory */
+ 	}
+ }
+ 
++/*
++ * omap_correct_data - Compares the ecc read from nand spare area with ECC
++ * registers values and corrects one bit error if it has occured
++ * @mtd: MTD device structure
++ * @dat: page data
++ * @read_ecc: ecc read from nand flash
++ * @calc_ecc: ecc read from ECC registers
++ */
+ static int omap_correct_data(struct mtd_info *mtd, u_char * dat,
+ 				u_char * read_ecc, u_char * calc_ecc)
+ {
+@@ -436,65 +451,64 @@ static int omap_correct_data(struct mtd_info *mtd, u_char * dat,
+ }
+ 
+ /*
+-** Generate non-inverted ECC bytes.
+-**
+-** Using noninverted ECC can be considered ugly since writing a blank
+-** page ie. padding will clear the ECC bytes. This is no problem as long
+-** nobody is trying to write data on the seemingly unused page.
+-**
+-** Reading an erased page will produce an ECC mismatch between
+-** generated and read ECC bytes that has to be dealt with separately.
+-*/
++ * omap_calcuate_ecc - Generate non-inverted ECC bytes.
++ * Using noninverted ECC can be considered ugly since writing a blank
++ * page ie. padding will clear the ECC bytes. This is no problem as long
++ * nobody is trying to write data on the seemingly unused page. Reading
++ * an erased page will produce an ECC mismatch between generated and read
++ * ECC bytes that has to be dealt with separately.
++ * @mtd: MTD device structure
++ * @dat: The pointer to data on which ecc is computed
++ * @ecc_code: The ecc_code buffer
++ */
+ static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ 				u_char *ecc_code)
+ {
+ 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ 							mtd);
+ 	unsigned long val = 0x0;
+-	unsigned long reg, n;
+-
+-	/* Ex NAND_ECC_HW12_2048 */
+-	if ((info->nand.ecc.mode == NAND_ECC_HW) &&
+-		(info->nand.ecc.size  == 2048))
+-		n = 4;
+-	else
+-		n = 1;
++	unsigned long reg;
+ 
+ 	/* Start Reading from HW ECC1_Result = 0x200 */
+ 	reg = (unsigned long)(info->gpmc_baseaddr + GPMC_ECC1_RESULT);
+-	while (n--) {
+-		val = __raw_readl(reg);
+-		*ecc_code++ = val;		/* P128e, ..., P1e */
+-		*ecc_code++ = val >> 16;	/* P128o, ..., P1o */
+-		/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
+-		*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
+-		reg += 4;
+-	}
++	val = __raw_readl(reg);
++	*ecc_code++ = val;          /* P128e, ..., P1e */
++	*ecc_code++ = val >> 16;    /* P128o, ..., P1o */
++	/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
++	*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
++	reg += 4;
+ 
+ 	return 0;
+-} /* omap_calculate_ecc */
++}
+ 
++/*
++ * omap_enable_hwecc - This function enables the hardware ecc functionality
++ * @mtd: MTD device structure
++ * @mode: Read/Write mode
++ */
+ static void omap_enable_hwecc(struct mtd_info *mtd, int mode)
+ {
+ 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ 							mtd);
++	register struct nand_chip *chip = mtd->priv;
++	unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+ 	unsigned long val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_CONFIG);
+ 
+ 	switch (mode) {
+ 	case NAND_ECC_READ    :
+ 		__raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
+-		/* ECC 16 bit col) | ( CS 0 )  | ECC Enable */
+-		val = (1 << 7) | (0x0) | (0x1) ;
++		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
++		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
+ 		break;
+ 	case NAND_ECC_READSYN :
+-		__raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
+-		/* ECC 16 bit col) | ( CS 0 )  | ECC Enable */
+-		val = (1 << 7) | (0x0) | (0x1) ;
++		 __raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
++		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
++		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
+ 		break;
+ 	case NAND_ECC_WRITE   :
+ 		__raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
+-		/* ECC 16 bit col) | ( CS 0 )  | ECC Enable */
+-		val = (1 << 7) | (0x0) | (0x1) ;
++		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
++		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
+ 		break;
+ 	default:
+ 		DEBUG(MTD_DEBUG_LEVEL0, "Error: Unrecognized Mode[%d]!\n",
+@@ -504,7 +518,38 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int mode)
+ 
+ 	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_CONFIG);
+ }
++#endif
+ 
++/*
++ * omap_wait - Wait function is called during Program and erase
++ * operations and the way it is called from MTD layer, we should wait
++ * till the NAND chip is ready after the programming/erase operation
++ * has completed.
++ * @mtd: MTD device structure
++ * @chip: NAND Chip structure
++ */
++static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
++{
++	register struct nand_chip *this = mtd->priv;
++	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
++							mtd);
++	int status = 0;
++
++	this->IO_ADDR_W = (void *) info->gpmc_cs_baseaddr +
++						GPMC_CS_NAND_COMMAND;
++	this->IO_ADDR_R = (void *) info->gpmc_cs_baseaddr + GPMC_CS_NAND_DATA;
++
++	while (!(status & 0x40)) {
++		 __raw_writeb(NAND_CMD_STATUS & 0xFF, this->IO_ADDR_W);
++		status = __raw_readb(this->IO_ADDR_R);
++	}
++	return status;
++}
++
++/*
++ * omap_dev_ready - calls the platform specific dev_ready function
++ * @mtd: MTD device structure
++ */
+ static int omap_dev_ready(struct mtd_info *mtd)
+ {
+ 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+@@ -534,7 +579,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
+ 	struct omap_nand_info		*info;
+ 	struct omap_nand_platform_data	*pdata;
+ 	int				err;
+-	unsigned long val;
++	unsigned long 			val;
+ 
+ 
+ 	pdata = pdev->dev.platform_data;
+@@ -568,15 +613,20 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
+ 	}
+ 
+ 	/* Enable RD PIN Monitoring Reg */
+-	val  = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1);
+-	val |= WR_RD_PIN_MONITORING;
+-	gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG1, val);
++	if (pdata->dev_ready) {
++		val  = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1);
++		val |= WR_RD_PIN_MONITORING;
++		gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG1, val);
++	}
+ 
+ 	val  = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG7);
+ 	val &= ~(0xf << 8);
+ 	val |=  (0xc & 0xf) << 8;
+ 	gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG7, val);
+ 
++	/* NAND write protect off */
++	omap_nand_wp(&info->mtd, NAND_WP_OFF);
++
+ 	if (!request_mem_region(info->phys_base, NAND_IO_SIZE,
+ 				pdev->dev.driver->name)) {
+ 		err = -EBUSY;
+@@ -597,29 +647,39 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
+ 	info->nand.write_buf  = omap_write_buf;
+ 	info->nand.verify_buf = omap_verify_buf;
+ 
+-	info->nand.dev_ready  = omap_dev_ready;
+-	info->nand.chip_delay = 0;
+-
+-	/* Options */
+-	info->nand.options   = NAND_BUSWIDTH_16;
+-	info->nand.options  |= NAND_SKIP_BBTSCAN;
+-
+-	if (hw_ecc) {
+-		/* init HW ECC */
+-		omap_hwecc_init(&info->mtd);
+-
+-		info->nand.ecc.calculate = omap_calculate_ecc;
+-		info->nand.ecc.hwctl     = omap_enable_hwecc;
+-		info->nand.ecc.correct   = omap_correct_data;
+-		info->nand.ecc.mode      = NAND_ECC_HW;
+-		info->nand.ecc.bytes     = 12;
+-		info->nand.ecc.size      = 2048;
+-		info->nand.ecc.layout    = &omap_hw_eccoob;
+-
++	/*
++	* If RDY/BSY line is connected to OMAP then use the omap ready funcrtion
++	* and the generic nand_wait function which reads the status register
++	* after monitoring the RDY/BSY line.Otherwise use a standard chip delay
++	* which is slightly more than tR (AC Timing) of the NAND device and read
++	* status register until you get a failure or success
++	*/
++	if (pdata->dev_ready) {
++		info->nand.dev_ready = omap_dev_ready;
++		info->nand.chip_delay = 0;
+ 	} else {
+-		info->nand.ecc.mode = NAND_ECC_SOFT;
++		info->nand.waitfunc = omap_wait;
++		info->nand.chip_delay = 50;
+ 	}
+ 
++	info->nand.options  |= NAND_SKIP_BBTSCAN;
++	if ((gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1) & 0x3000)
++								== 0x1000)
++		info->nand.options  |= NAND_BUSWIDTH_16;
++
++#ifdef CONFIG_MTD_NAND_OMAP_HWECC
++	info->nand.ecc.bytes		= 3;
++	info->nand.ecc.size		= 512;
++	info->nand.ecc.calculate	= omap_calculate_ecc;
++	info->nand.ecc.hwctl		= omap_enable_hwecc;
++	info->nand.ecc.correct		= omap_correct_data;
++	info->nand.ecc.mode		= NAND_ECC_HW;
++
++	/* init HW ECC */
++	omap_hwecc_init(&info->mtd);
++#else
++	info->nand.ecc.mode = NAND_ECC_SOFT;
++#endif
+ 
+ 	/* DIP switches on some boards change between 8 and 16 bit
+ 	 * bus widths for flash.  Try the other width if the first try fails.
+@@ -636,14 +696,12 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
+ 	err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
+ 	if (err > 0)
+ 		add_mtd_partitions(&info->mtd, info->parts, err);
+-	else if (err < 0 && pdata->parts)
++	else if (err <= 0 && pdata->parts)
+ 		add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts);
+ 	else
+ #endif
+ 		add_mtd_device(&info->mtd);
+ 
+-	omap_nand_wp(&info->mtd, NAND_WP_OFF);
+-
+ 	platform_set_drvdata(pdev, &info->mtd);
+ 
+ 	return 0;
+diff --git a/include/asm-arm/arch-omap/board-omap3beagle.h b/include/asm-arm/arch-omap/board-omap3beagle.h
+index 46dff31..26ecfb8 100644
+--- a/include/asm-arm/arch-omap/board-omap3beagle.h
++++ b/include/asm-arm/arch-omap/board-omap3beagle.h
+@@ -29,5 +29,7 @@
+ #ifndef __ASM_ARCH_OMAP3_BEAGLE_H
+ #define __ASM_ARCH_OMAP3_BEAGLE_H
+ 
++extern void omap3beagle_flash_init(void);
++
+ #endif /* __ASM_ARCH_OMAP3_BEAGLE_H */
+ 

meta/packages/linux/linux-omap3-git/beagleboard/no-empty-flash-warnings.patch

@@ -0,0 +1,15 @@
+diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c
+index 1d437de..33b3feb 100644
+--- a/fs/jffs2/scan.c
++++ b/fs/jffs2/scan.c
+@@ -647,8 +647,8 @@ scan_more:
+ 			inbuf_ofs = ofs - buf_ofs;
+ 			while (inbuf_ofs < scan_end) {
+ 				if (unlikely(*(uint32_t *)(&buf[inbuf_ofs]) != 0xffffffff)) {
+-					printk(KERN_WARNING "Empty flash at 0x%08x ends at 0x%08x\n",
+-					       empty_start, ofs);
++//					printk(KERN_WARNING "Empty flash at 0x%08x ends at 0x%08x\n",
++//					       empty_start, ofs);
+ 					if ((err = jffs2_scan_dirty_space(c, jeb, ofs-empty_start)))
+ 						return err;
+ 					goto scan_more;

meta/packages/linux/linux-omap3-git/omap3evm/no-empty-flash-warnings.patch

@@ -0,0 +1,15 @@
+diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c
+index 1d437de..33b3feb 100644
+--- a/fs/jffs2/scan.c
++++ b/fs/jffs2/scan.c
+@@ -647,8 +647,8 @@ scan_more:
+ 			inbuf_ofs = ofs - buf_ofs;
+ 			while (inbuf_ofs < scan_end) {
+ 				if (unlikely(*(uint32_t *)(&buf[inbuf_ofs]) != 0xffffffff)) {
+-					printk(KERN_WARNING "Empty flash at 0x%08x ends at 0x%08x\n",
+-					       empty_start, ofs);
++//					printk(KERN_WARNING "Empty flash at 0x%08x ends at 0x%08x\n",
++//					       empty_start, ofs);
+ 					if ((err = jffs2_scan_dirty_space(c, jeb, ofs-empty_start)))
+ 						return err;
+ 					goto scan_more;

meta/packages/linux/linux-omap3-git/overo/no-empty-flash-warnings.patch

@@ -0,0 +1,15 @@
+diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c
+index 1d437de..33b3feb 100644
+--- a/fs/jffs2/scan.c
++++ b/fs/jffs2/scan.c
+@@ -647,8 +647,8 @@ scan_more:
+ 			inbuf_ofs = ofs - buf_ofs;
+ 			while (inbuf_ofs < scan_end) {
+ 				if (unlikely(*(uint32_t *)(&buf[inbuf_ofs]) != 0xffffffff)) {
+-					printk(KERN_WARNING "Empty flash at 0x%08x ends at 0x%08x\n",
+-					       empty_start, ofs);
++//					printk(KERN_WARNING "Empty flash at 0x%08x ends at 0x%08x\n",
++//					       empty_start, ofs);
+ 					if ((err = jffs2_scan_dirty_space(c, jeb, ofs-empty_start)))
+ 						return err;
+ 					goto scan_more;

meta/packages/linux/linux-omap3-git/overo/overo.patch

@@ -0,0 +1,97 @@
+diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
+index 396ec33..85ef43f 100644
+--- a/arch/arm/mach-omap2/board-overo.c
++++ b/arch/arm/mach-omap2/board-overo.c
+@@ -158,11 +158,6 @@ static void __init overo_init_irq(void)
+ 	omap_gpio_init();
+ }
+ 
+-static struct platform_device overo_twl4030rtc_device = {
+-	.name           = "twl4030_rtc",
+-	.id             = -1,
+-};
+-
+ static struct platform_device overo_lcd_device = {
+ 	.name		= "overo_lcd",
+ 	.id		= -1,
+@@ -179,9 +174,6 @@ static struct omap_board_config_kernel overo_config[] __initdata = {
+ 
+ static struct platform_device *overo_devices[] __initdata = {
+ 	&overo_lcd_device,
+-#ifdef CONFIG_RTC_DRV_TWL4030
+-	&overo_twl4030rtc_device,
+-#endif
+ };
+ 
+ static void __init overo_init(void)
+@@ -207,6 +199,12 @@ static void __init overo_init(void)
+ 		printk(KERN_ERR "could not obtain gpio for OVERO_GPIO_W2W_NRESET\n");
+ 	}
+ 
++	if ((gpio_request(OVERO_GPIO_BT_XGATE, "OVERO_GPIO_BT_XGATE") == 0) &&
++	    (gpio_direction_output(OVERO_GPIO_BT_XGATE, 0) == 0))
++		gpio_export(OVERO_GPIO_BT_XGATE, 0);
++	else
++		printk(KERN_ERR "could not obtain gpio for OVERO_GPIO_BT_XGATE\n");
++
+ 	if ((gpio_request(OVERO_GPIO_BT_NRESET, "OVERO_GPIO_BT_NRESET") == 0) &&
+ 	    (gpio_direction_output(OVERO_GPIO_BT_NRESET, 1) == 0)) {
+ 		gpio_export(OVERO_GPIO_BT_NRESET, 0);
+diff --git a/arch/arm/plat-omap/include/mach/board-overo.h b/arch/arm/plat-omap/include/mach/board-overo.h
+index b70f22a..7ecae66 100644
+--- a/arch/arm/plat-omap/include/mach/board-overo.h
++++ b/arch/arm/plat-omap/include/mach/board-overo.h
+@@ -16,6 +16,7 @@
+ #ifndef __ASM_ARCH_OVERO_H
+ #define __ASM_ARCH_OVERO_H
+ 
++#define OVERO_GPIO_BT_XGATE	15
+ #define OVERO_GPIO_W2W_NRESET	16
+ #define OVERO_GPIO_BT_NRESET	164
+ #define OVERO_GPIO_USBH_CPEN	168
+diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
+index c939f81..b9c2c76 100644
+--- a/drivers/usb/musb/musb_core.c
++++ b/drivers/usb/musb/musb_core.c
+@@ -1814,6 +1814,9 @@ allocate_instance(struct device *dev,
+ 		ep->epnum = epnum;
+ 	}
+ 
++#ifdef CONFIG_USB_MUSB_OTG
++	otg_set_transceiver(&musb->xceiv);
++#endif
+ 	musb->controller = dev;
+ 	return musb;
+ }
+diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
+index 9d2dcb1..51af80b 100644
+--- a/drivers/usb/musb/omap2430.c
++++ b/drivers/usb/musb/omap2430.c
+@@ -215,12 +215,14 @@ void musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+ 
+ int __init musb_platform_init(struct musb *musb)
+ {
++	struct otg_transceiver *xceiv = otg_get_transceiver();
+ 	u32 l;
+ 
+ #if defined(CONFIG_ARCH_OMAP2430)
+ 	omap_cfg_reg(AE5_2430_USB0HS_STP);
+ #endif
+ 
++	musb->xceiv = *xceiv;
+ 	musb_platform_resume(musb);
+ 
+ 	l = omap_readl(OTG_SYSCONFIG);
+diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst
+index 6bf8e87..fb20532 100644
+--- a/scripts/Makefile.fwinst
++++ b/scripts/Makefile.fwinst
+@@ -37,7 +37,7 @@ install-all-dirs: $(installed-fw-dirs)
+ 	@true
+ 
+ quiet_cmd_install = INSTALL $(subst $(srctree)/,,$@)
+-      cmd_install = $(INSTALL) -m0644 $< $@
++      cmd_install = $(INSTALL) -m 0644 $< $@
+ 
+ $(installed-fw-dirs):
+ 	$(call cmd,mkdir)

meta/packages/linux/linux-omap3_git.bb

@@ -0,0 +1,29 @@
+require linux-omap2.inc
+
+FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/linux-omap3-git/${MACHINE}"
+
+SRCREV = "de1121fdb899f762b9e717f44eaf3fae7c00cd3e"
+
+PV = "2.6.27-rc6+${PR}+git${SRCREV}"
+PR = "r30"
+
+SRC_URI = "git://source.mvista.com/git/linux-omap-2.6.git;branch=master;protocol=git \
+	   file://defconfig"
+
+SRC_URI_append_beagleboard = " \
+           file://no-empty-flash-warnings.patch;patch=1 \
+          "
+
+SRC_URI_append_omap3evm = " \
+           file://no-empty-flash-warnings.patch;patch=1 \
+          "
+
+SRC_URI_append_overo = " \
+           file://logo_linux_clut224.ppm \
+           file://no-empty-flash-warnings.patch;patch=1 \
+           file://overo.patch;patch=1 \
+          "
+
+COMPATIBLE_MACHINE = "beagleboard|omap3evm|overo"
+
+S = "${WORKDIR}/git"

meta/packages/opkg/opkg_svn.bb

@@ -24,6 +24,7 @@ EXTRACFLAGS_omap-3430ldp = "-Wno-array-bounds"
 EXTRACFLAGS_omap-3430sdp = "-Wno-array-bounds"
 EXTRACFLAGS_beagleboard = "-Wno-array-bounds"
 EXTRACFLAGS_qemuarmv7 = "-Wno-array-bounds"
+EXTRACFLAGS_overo = "-Wno-array-bounds"
 
 TARGET_CFLAGS += "${EXTRACFLAGS}"
 

meta/packages/uboot/u-boot-omap3-git/beagleboard/name.patch

@@ -0,0 +1,14 @@
+--- git/Makefile.orig	2008-07-25 16:21:22.000000000 -0700
++++ git/Makefile	2008-07-27 06:49:08.000000000 -0700
+@@ -2582,8 +2582,8 @@ SMN42_config	:	unconfig
+ #########################################################################
+ ## ARM CORTEX Systems
+ #########################################################################
+-omap3530beagle_config :	unconfig
+-	@$(MKCONFIG) $(@:_config=) arm omap3 omap3530beagle
++beagleboard_config :	unconfig
++	@$(MKCONFIG) omap3530beagle arm omap3 omap3530beagle
+ 
+ overo_config	:	unconfig
+ 	@$(MKCONFIG) $(@:_config=) arm omap3 overo
+

meta/packages/uboot/u-boot-omap3_git.bb

@@ -0,0 +1,19 @@
+require u-boot.inc
+
+FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/u-boot-omap3-git/${MACHINE}"
+
+SRCREV = "dcae48d0df9dd0367172677f8154eb2683de0865"
+
+PV = "2008.10-rc2+${PR}+git${SRCREV}"
+PR="r2"
+
+SRC_URI = "git://www.sakoman.net/git/u-boot-omap3.git;branch=common;protocol=git \
+          "
+
+UBOOT_MACHINE_beagleboard = "omap3_beagle_config"
+UBOOT_MACHINE_omap3evm = "omap3_evm_config"
+UBOOT_MACHINE_overo = "omap3_overo_config"
+
+S = "${WORKDIR}/git"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"

meta/packages/uboot/u-boot.inc

@@ -0,0 +1,40 @@
+DESCRIPTION = "U-boot bootloader"
+HOMEPAGE = "http://u-boot.sf.net"
+SECTION = "bootloaders"
+PRIORITY = "optional"
+LICENSE = "GPL"
+PROVIDES = "virtual/bootloader"
+
+PARALLEL_MAKE=""
+
+EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX}"
+
+UBOOT_MACHINE ?= "${MACHINE}_config"
+UBOOT_IMAGE ?= "u-boot-${MACHINE}-${PV}-${PR}.bin"
+UBOOT_SYMLINK ?= "u-boot-${MACHINE}.bin"
+
+do_compile () {
+	unset LDFLAGS
+	unset CFLAGS
+	unset CPPFLAGS
+	oe_runmake ${UBOOT_MACHINE}
+	oe_runmake all
+}
+
+do_deploy () {
+	install -d ${DEPLOY_DIR_IMAGE}
+	install ${S}/u-boot.bin ${DEPLOY_DIR_IMAGE}/${UBOOT_IMAGE}
+	package_stagefile_shell ${DEPLOY_DIR_IMAGE}/${UBOOT_IMAGE}
+
+	cd ${DEPLOY_DIR_IMAGE}
+	rm -f ${UBOOT_SYMLINK}
+	ln -sf ${UBOOT_IMAGE} ${UBOOT_SYMLINK}
+	package_stagefile_shell ${DEPLOY_DIR_IMAGE}/${UBOOT_SYMLINK}
+}
+do_deploy[dirs] = "${S}"
+addtask deploy before do_build after do_compile
+
+do_stage() {
+	install -d ${STAGING_BINDIR_NATIVE}
+	install -m 755 tools/mkimage ${STAGING_BINDIR_NATIVE}/
+}

meta/packages/x-load/files/signGP.c

@@ -0,0 +1,73 @@
+//
+// signGP.c
+// Read the x-load.bin file and write out the x-load.bin.ift file.
+// The signed image is the original pre-pended with the size of the image
+// and the load address.  If not entered on command line, file name is
+// assumed to be x-load.bin in current directory and load address is
+// 0x40200800.
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+#include <string.h>
+#include <malloc.h>
+
+
+main(int argc, char *argv[])
+{
+	int	i;
+	char	ifname[FILENAME_MAX], ofname[FILENAME_MAX], ch;
+	FILE	*ifile, *ofile;
+	unsigned long	loadaddr, len;
+	struct stat	sinfo;
+
+
+	// Default to x-load.bin and 0x40200800.
+	strcpy(ifname, "x-load.bin");
+	loadaddr = 0x40200800;
+
+	if ((argc == 2) || (argc == 3))
+		strcpy(ifname, argv[1]);
+
+	if (argc == 3)
+		loadaddr = strtol(argv[2], NULL, 16);
+
+	// Form the output file name.
+	strcpy(ofname, ifname);
+	strcat(ofname, ".ift");
+
+	// Open the input file.
+	ifile = fopen(ifname, "rb");
+	if (ifile == NULL) {
+		printf("Cannot open %s\n", ifname);
+		exit(0);
+	}
+
+	// Get file length.
+	stat(ifname, &sinfo);
+	len = sinfo.st_size;
+
+	// Open the output file and write it.
+	ofile = fopen(ofname, "wb");
+	if (ofile == NULL) {
+		printf("Cannot open %s\n", ofname);
+		fclose(ifile);
+		exit(0);
+	}
+
+	// Pad 1 sector of zeroes.
+	//ch = 0x00;
+	//for (i=0; i<0x200; i++)
+	//	fwrite(&ch, 1, 1, ofile);
+
+	fwrite(&len, 1, 4, ofile);
+	fwrite(&loadaddr, 1, 4, ofile);
+	for (i=0; i<len; i++) {
+		fread(&ch, 1, 1, ifile);
+		fwrite(&ch, 1, 1, ofile);
+	}
+
+	fclose(ifile);
+	fclose(ofile);
+}

meta/packages/x-load/signgp-native.bb

@@ -0,0 +1,14 @@
+LICENSE = "unknown"
+DESCRIPTION = "Tool to sign omap3 x-loader images"
+
+inherit native 
+SRC_URI = "file://signGP.c"
+
+do_compile() {
+	${CC} ${WORKDIR}/signGP.c -o signGP
+}
+
+do_stage() {
+	install -d ${STAGING_BINDIR_NATIVE}
+	install -m 0755 signGP ${STAGING_BINDIR_NATIVE}
+}

meta/packages/x-load/x-load-git/beagleboard/armv7-a.patch

@@ -0,0 +1,11 @@
+--- git/cpu/omap3/config.mk-orig	2008-05-27 16:46:45.000000000 -0700
++++ git/cpu/omap3/config.mk	2008-05-29 12:50:49.000000000 -0700
+@@ -23,7 +23,7 @@
+ PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 \
+ 	-msoft-float
+ 
+-PLATFORM_CPPFLAGS += -march=armv7a
++PLATFORM_CPPFLAGS += -march=armv7-a
+ # =========================================================================
+ #
+ # Supply options according to compiler version

meta/packages/x-load/x-load-git/beagleboard/name.patch

@@ -0,0 +1,14 @@
+--- git/Makefile-orig	2008-07-29 22:31:03.000000000 -0700
++++ git/Makefile	2008-07-29 22:34:36.000000000 -0700
+@@ -152,9 +152,9 @@ omap3evm_config :	unconfig
+ overo_config :	unconfig
+ 	@./mkconfig $(@:_config=) arm omap3 overo
+ 
+-omap3530beagle_config :    unconfig
++beagleboard_config :    unconfig
+ 
+-	@./mkconfig $(@:_config=) arm omap3 omap3530beagle
++	@./mkconfig omap3530beagle arm omap3 omap3530beagle
+ 
+ #########################################################################
+ 

meta/packages/x-load/x-load-git/omap3evm/armv7-a.patch

@@ -0,0 +1,11 @@
+--- git/cpu/omap3/config.mk-orig	2008-05-27 16:46:45.000000000 -0700
++++ git/cpu/omap3/config.mk	2008-05-29 12:50:49.000000000 -0700
+@@ -23,7 +23,7 @@
+ PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 \
+ 	-msoft-float
+ 
+-PLATFORM_CPPFLAGS += -march=armv7a
++PLATFORM_CPPFLAGS += -march=armv7-a
+ # =========================================================================
+ #
+ # Supply options according to compiler version

meta/packages/x-load/x-load-git/overo/armv7-a.patch

@@ -0,0 +1,11 @@
+--- git/cpu/omap3/config.mk-orig	2008-05-27 16:46:45.000000000 -0700
++++ git/cpu/omap3/config.mk	2008-05-29 12:50:49.000000000 -0700
+@@ -23,7 +23,7 @@
+ PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 \
+ 	-msoft-float
+ 
+-PLATFORM_CPPFLAGS += -march=armv7a
++PLATFORM_CPPFLAGS += -march=armv7-a
+ # =========================================================================
+ #
+ # Supply options according to compiler version

meta/packages/x-load/x-load.inc

@@ -0,0 +1,46 @@
+DESCRIPTION = "x-load bootloader loader"
+SECTION = "bootloaders"
+PRIORITY = "optional"
+LICENSE = "GPL"
+
+DEPENDS = "signgp-native"
+
+PARALLEL_MAKE=""
+
+EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX}"
+
+XLOAD_MACHINE ?= "${MACHINE}_config"
+
+XLOAD_IMAGE ?= "x-load-${MACHINE}-${PV}-${PR}.bin.ift"
+XLOAD_SYMLINK ?= "x-load-${MACHINE}.bin.ift"
+MLO_IMAGE ?= "MLO-${MACHINE}-${PV}-${PR}"
+MLO_SYMLINK ?= "MLO-${MACHINE}"
+
+do_compile () {
+	unset LDFLAGS
+	unset CFLAGS
+	unset CPPFLAGS
+	oe_runmake distclean
+	oe_runmake ${XLOAD_MACHINE}
+	oe_runmake
+}
+
+do_deploy () {
+	signGP ${S}/x-load.bin
+	install -d ${DEPLOY_DIR_IMAGE}
+	install ${S}/x-load.bin.ift ${DEPLOY_DIR_IMAGE}/${XLOAD_IMAGE}
+	install ${S}/x-load.bin.ift ${DEPLOY_DIR_IMAGE}/${MLO_IMAGE}
+	package_stagefile_shell ${DEPLOY_DIR_IMAGE}/${XLOAD_IMAGE}
+	package_stagefile_shell	${DEPLOY_DIR_IMAGE}/${MLO_IMAGE}
+
+	cd ${DEPLOY_DIR_IMAGE}
+	rm -f ${XLOAD_SYMLINK}
+	ln -sf ${XLOAD_IMAGE} ${XLOAD_SYMLINK}
+	rm -f ${MLO_SYMLINK}
+	ln -sf ${MLO_IMAGE} ${MLO_SYMLINK}
+	package_stagefile_shell ${DEPLOY_DIR_IMAGE}/${XLOAD_SYMLINK}
+	package_stagefile_shell ${DEPLOY_DIR_IMAGE}/${MLO_SYMLINK}
+}
+do_deploy[dirs] = "${S}"
+addtask deploy before do_build after do_compile
+

meta/packages/x-load/x-load_git.bb

@@ -0,0 +1,27 @@
+require x-load.inc
+
+FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/x-load-git/${MACHINE}"
+
+SRCREV = "65ed00323f3807197a83abc75d62ed2a8d3f60de"
+
+PV = "1.42+${PR}+git${SRCREV}"
+PR="r12"
+
+SRC_URI = "git://www.sakoman.net/git/x-load-omap3.git;branch=master;protocol=git"
+
+SRC_URI_append_beagleboard = " \
+                              file://name.patch;patch=1 \
+                              file://armv7-a.patch;patch=1 \
+                             "
+
+SRC_URI_append_omap3evm = " \
+                              file://armv7-a.patch;patch=1 \
+                             "
+
+SRC_URI_append_overo = " \
+                              file://armv7-a.patch;patch=1 \
+                             "
+
+S = "${WORKDIR}/git"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"