2010-04-29 12:34:05 +00:00
# CONF_VERSION is increased each time build/conf/ changes incompatibly
CONF_VERSION = "1"
2010-07-19 10:31:40 +00:00
# Uncomment and change to cache the files Poky downloads in an alternative
2010-09-16 14:14:58 +00:00
# location, default it ${TOPDIR}/downloads
#DL_DIR ?= "${TOPDIR}/downloads"
2010-07-19 10:31:40 +00:00
# Uncomment and change to cache Poky's built staging output in an alternative
2010-09-29 10:19:22 +00:00
# location, default ${TOPDIR}/sstate-cache
#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
2005-08-31 10:47:56 +00:00
2008-09-11 22:41:08 +00:00
# Uncomment and set to allow bitbake to execute multiple tasks at once.
# For a quadcore, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would
# be appropriate.
# BB_NUMBER_THREADS = "4"
# Also, make can be passed flags so it run parallel threads e.g.:
# PARALLEL_MAKE = "-j 4"
2005-08-31 10:47:56 +00:00
2011-02-18 15:52:02 +00:00
# Set a default machine to target unless a machine is selected from the
# lists below.
MACHINE ??= "qemux86"
2006-10-12 13:05:06 +00:00
2011-02-18 15:20:01 +00:00
# Supported emulation machines
2008-10-21 14:01:02 +00:00
#MACHINE ?= "qemuarm"
2011-02-18 15:20:01 +00:00
#MACHINE ?= "qemumips"
#MACHINE ?= "qemuppc"
#MACHINE ?= "qemux86"
2010-09-15 03:55:45 +00:00
#MACHINE ?= "qemux86-64"
2011-02-18 15:20:01 +00:00
# Supported target hardware for demonstration purposes
2010-10-07 20:04:23 +00:00
#MACHINE ?= "atom-pc"
2011-02-18 15:20:01 +00:00
#MACHINE ?= "beagleboard"
#MACHINE ?= "emenlow"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "routerstationpro"
2006-12-15 19:51:03 +00:00
2007-03-20 17:22:39 +00:00
DISTRO ?= "poky"
2006-12-15 19:51:03 +00:00
# For bleeding edge / experimental / unstable package versions
2007-03-20 17:22:39 +00:00
# DISTRO ?= "poky-bleeding"
2005-08-31 10:47:56 +00:00
2008-09-11 22:41:08 +00:00
BBMASK = ""
2008-01-10 23:50:30 +00:00
# EXTRA_IMAGE_FEATURES allows extra packages to be added to the generated images
2006-12-20 00:00:03 +00:00
# (Some of these are automatically added to certain image types)
2007-06-29 14:31:00 +00:00
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
# "tools-debug" - add debugging tools (gdb, strace)
# "tools-profile" - add profiling tools (oprofile, exmap, lttng valgrind (x86 only))
# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
# "debug-tweaks" - make an image for suitable of development
# e.g. ssh root access has a blank password
2011-04-20 23:14:53 +00:00
# There are other application targets too, see meta/classes/core-image.bbclass
# and meta/recipes-core/tasks/task-core.bb for more details.
2007-06-29 14:31:00 +00:00
2008-01-10 23:50:30 +00:00
EXTRA_IMAGE_FEATURES = "tools-debug tools-profile tools-testapps debug-tweaks"
2005-08-31 10:47:56 +00:00
2008-01-09 10:35:01 +00:00
# The default IMAGE_FEATURES above are too large for the mx31phy and
# c700/c750 machines which have limited space. The code below limits
# the default features for those machines.
2008-01-10 23:50:30 +00:00
EXTRA_IMAGE_FEATURES_c7x0 = "tools-testapps debug-tweaks"
2008-01-14 17:12:04 +00:00
EXTRA_IMAGE_FEATURES_mx31phy = "debug-tweaks"
2008-02-20 12:34:35 +00:00
EXTRA_IMAGE_FEATURES_mx31ads = "tools-testapps debug-tweaks"
2008-01-09 10:35:01 +00:00
2006-11-24 17:14:24 +00:00
# A list of packaging systems used in generated images
# The first package type listed will be used for rootfs generation
# include 'package_deb' for debs
# include 'package_ipk' for ipks
2010-09-28 15:44:37 +00:00
# include 'package_rpm' for rpms
#PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
2010-10-07 09:23:30 +00:00
PACKAGE_CLASSES ?= "package_rpm package_ipk"
2005-08-31 10:47:56 +00:00
2011-01-25 16:43:10 +00:00
# mklibs library size optimization is more useful to smaller images,
# and less useful for bigger images. Also mklibs library optimization can break the ABI compatibility, so should not be applied to the images which are tobe
# extended or upgraded later.
#This enabled mklibs library size optimization just for the specified image.
2011-04-20 23:14:53 +00:00
#MKLIBS_OPTIMIZED_IMAGES ?= "core-image-minimal"
2011-01-25 16:43:10 +00:00
#This enable mklibs library size optimization will be for all the images.
#MKLIBS_OPTIMIZED_IMAGES ?= "all"
2010-08-06 18:40:55 +00:00
# A list of additional classes to use when building the system
2011-01-25 16:43:10 +00:00
# include 'image-mklibs' to reduce shared library files size for an image
2010-08-06 18:40:55 +00:00
# include 'image-prelink' in order to prelink the filesystem image
2010-10-08 15:56:51 +00:00
# include 'image-swab' to perform host system intrusion detection
2011-01-25 16:43:10 +00:00
# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
USER_CLASSES ?= "image-mklibs image-prelink"
2010-08-06 18:40:55 +00:00
2007-08-01 13:23:41 +00:00
# POKYMODE controls the characteristics of the generated packages/images by
# telling poky which type of toolchain to use.
#
# Options include several different EABI combinations and a compatibility
# mode for the OABI mode poky previously used.
#
# The default is "eabi"
# Use "oabi" for machines with kernels < 2.6.18 on ARM for example.
2007-11-07 10:58:31 +00:00
# Use "external-MODE" to use the precompiled external toolchains where MODE
# is the type of external toolchain to use e.g. eabi.
# POKYMODE = "external-eabi"
2007-01-08 21:02:07 +00:00
2006-07-21 12:16:39 +00:00
# Uncomment this to specify where BitBake should create its temporary files.
# Note that a full build of everything in OpenEmbedded will take GigaBytes of hard
# disk space, so make sure to free enough space. The default TMPDIR is
# <build directory>/tmp
2011-04-20 23:14:53 +00:00
#TMPDIR = "${COREBASE}/build/tmp"
2005-08-31 10:47:56 +00:00
2011-02-09 03:46:47 +00:00
# The following are used to control options related to debugging.
#
# Uncomment this to change the optimization to make debugging easer, at the
# possible cost of performance.
# DEBUG_BUILD = "1"
#
# Uncomment this to disable the stripping of the installed binaries
# INHIBIT_PACKAGE_STRIP = "1"
#
# Uncomment this to disable the split of the debug information into -dbg files
# INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
#
# When splitting debug information, the following controls the results of the
# file splitting.
#
# .debug (default):
# When splitting the debug information will be placed into
# a .debug directory in the same dirname of the binary produced:
# /bin/foo -> /bin/.debug/foo
#
# debug-file-directory:
# When splitting the debug information will be placed into
# a central debug-file-directory, /usr/lib/debug:
# /bin/foo -> /usr/lib/debug/bin/foo.debug
#
# Any source code referenced in the debug symbols will be copied
# and made available within the /usr/src/debug directory
#
PACKAGE_DEBUG_SPLIT_STYLE = '.debug'
# PACKAGE_DEBUG_SPLIT_STYLE = 'debug-file-directory'
2005-08-31 10:47:56 +00:00
# Uncomment these to build a package such that you can use gprof to profile it.
# NOTE: This will only work with 'linux' targets, not
# 'linux-uclibc', as uClibc doesn't provide the necessary
# object files. Also, don't build glibc itself with these
# flags, or it'll fail to build.
#
# PROFILE_OPTIMIZATION = "-pg"
# SELECTED_OPTIMIZATION = "${PROFILE_OPTIMIZATION}"
# LDFLAGS =+ "-pg"
# Uncomment this if you want BitBake to emit the log if a build fails.
BBINCLUDELOGS = "yes"
2007-08-14 12:46:44 +00:00
# Set this if you wish to make pkgconfig libraries from your system available
# for native builds. Combined with extra ASSUME_PROVIDEDs this can allow
# native builds of applications like oprofileui-native (unsupported feature).
#EXTRA_NATIVE_PKGCONFIG_PATH = ":/usr/lib/pkgconfig"
#ASSUME_PROVIDED += "gtk+-native libglade-native"
2006-04-13 13:59:34 +00:00
ENABLE_BINARY_LOCALE_GENERATION = "1"
2009-12-11 14:28:22 +00:00
# The architecture to build SDK items for, by setting this you can build SDK
2011-02-08 19:48:20 +00:00
# packages for architectures other than the host i.e. building i686 packages
2009-12-11 14:28:22 +00:00
# on an x86_64 host.
2011-02-08 19:48:20 +00:00
# Supported values are i686 and x86_64
#SDKMACHINE ?= "i686"
2010-01-29 12:27:30 +00:00
# Poky can try and fetch packaged-staging packages from a http, https or ftp
# mirror. Set this variable to the root of a pstage directory on a server.
2010-10-07 14:42:56 +00:00
#SSTATE_MIRRORS ?= "\
#file://.* http://someserver.tld/share/sstate/ \n \
#file://.* file:///some/local/dir/sstate/"
2010-07-07 18:06:58 +00:00
# Set IMAGETEST to qemu if you want to build testcases and start
# testing in qemu after do_rootfs.
2010-07-29 18:20:16 +00:00
#IMAGETEST = "qemu"
2010-07-07 18:06:58 +00:00
2010-08-18 14:02:08 +00:00
# By default test cases in sanity suite will be ran. If you want to run other
# test suite or specific test case(e.g. bat or boot test case under sanity suite),
# list them like following.
#TEST_SCEN = "sanity bat sanity:boot"
2010-10-01 12:11:30 +00:00
2011-01-13 01:46:14 +00:00
#Because of the QEMU booting slowness issue(see bug #646 and #618), autobuilder
#may suffer a timeout issue when running sanity test. We introduce variable
2011-01-18 16:22:30 +00:00
#TEST_SERIALIZE here to reduce the time on sanity test. It is by default set
#to 1. Poky will start image and run cases in the same image without reboot
#or kill. If it is set to 0, the image will be copied and tested for each
#case, which will take much time.
#TEST_SERIALIZE = "1"
2011-01-13 01:46:14 +00:00
2010-10-01 12:11:30 +00:00
# Set GLIBC_GENERATE_LOCALES to the locales you wish to generate should you not
# wish to perform the time-consuming step of generating all LIBC locales.
2010-11-26 14:23:16 +00:00
# NOTE: If removing en_US.UTF-8 you will also need to uncomment, and set
# appropriate values for IMAGE_LINGUAS and LIMIT_BUILT_LOCALES
2010-10-01 12:11:30 +00:00
# WARNING: this may break localisation!
#GLIBC_GENERATE_LOCALES = "en_GB.UTF-8 en_US.UTF-8"
2010-11-26 14:23:16 +00:00
# See message above as to whether setting these is required
#IMAGE_LINGUAS ?= "en-gb"
#LIMIT_BUILT_LOCALES ?= "POSIX en_GB"
2010-10-21 22:28:14 +00:00
2011-02-04 00:54:58 +00:00
# This value is currently used by PSEUDO to determine if the recipe should
# build both the 32-bit and 64-bit wrapper libraries on a 64-bit build system.
#
# PSEUDO will attempt to determine if a 32-bit wrapper is necessary, but
# it doesn't always guess properly. If you have 32-bit executables on
# your 64-bit build system, you likely want to set this to "0",
# otherwise you could end up with incorrect file attributes on the
# target filesystem.
#
2010-10-21 22:28:14 +00:00
# Default to not build 32 bit libs on 64 bit systems, comment this
# out if that is desired
NO32LIBS = "1"
2010-11-26 16:43:05 +00:00
# If you do not use (or have installed) gnome-terminal you will need to
# uncomment these variables and set them to the terminal you wish to use
# when resolving patches which cannot be applied
# Supported shell prefixes for *_TERMCMD and *_TERMCMDRUN ARE:
# GNOME, SCREEN, XTERM and KONSOLE
#TERMCMD = "${KONSOLE_TERMCMD}"
#TERMCMDRUN = "${KONSOLE_TERMCMDRUN}"