sysmo-bts
/
femtobts-firmware
9
0
Fork 0
Code Issues Pull Requests Releases Activity
femtobts-firmware/api/superfemto.h

680 lines
30 KiB
C
Raw Permalink Blame History

#ifndef SUPERFEMTO_H__
#define SUPERFEMTO_H__
#define SUPEEFEMTO_API(x,y,z) ((x << 16) | (y << 8) | z)
#define SUPERFEMTO_API_VERSION SUPERFEMTO_API(2,4,0)
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
/****************************************************************************
* Includes *
****************************************************************************/
#include <stdint.h>
#include "gsml1const.h"
/****************************************************************************
* Const *
****************************************************************************/
/****************************************************************************
* Enum: SuperFemto_Status_t
************************************************************************//**
*
* Status used by the SuperFemto.
*
* @ingroup superfemto_api
*
****************************************************************************/
typedef GsmL1_Status_t SuperFemto_Status_t;
/****************************************************************************
* Enum : SuperFemto_PrimId_t
************************************************************************//**
*
* System management primitives.
*
* @ingroup superfemto_api
*
****************************************************************************/
typedef enum SuperFemto_PrimId_t
{
SuperFemto_PrimId_SystemInfoReq, ///< REQ: System information
SuperFemto_PrimId_SystemInfoCnf, ///< CNF: System information
SuperFemto_PrimId_SystemFailureInd, ///< IND: System failure indication
SuperFemto_PrimId_ActivateRfReq, ///< REQ: Activation of the RF section
SuperFemto_PrimId_ActivateRfCnf, ///< CNF: Activation of the RF section
SuperFemto_PrimId_DeactivateRfReq, ///< REQ: Deactivation of the RF section
SuperFemto_PrimId_DeactivateRfCnf, ///< CNF: Deactivation of the RF section
SuperFemto_PrimId_SetTraceFlagsReq, ///< REQ: Set the verbosity of the system
SuperFemto_PrimId_RfClockInfoReq, ///< REQ: Information about the RF clock sub-system
SuperFemto_PrimId_RfClockInfoCnf, ///< CNF: Returns the RF clock sub-system information
SuperFemto_PrimId_RfClockSetupReq, ///< REQ: Configure the RF clock sub-system
SuperFemto_PrimId_RfClockSetupCnf, ///< CNF: Confirm the configuration of the RF clock sub-system
SuperFemto_PrimId_Layer1ResetReq, ///< REQ: Trigger a reset of the GSM layer 1 library
SuperFemto_PrimId_Layer1ResetCnf, ///< CNF: Confirm that the GSM layer 1 library was reset
SuperFemto_PrimId_GetTxCalibTblReq, ///< REQ: Get the TX gain calibration table
SuperFemto_PrimId_GetTxCalibTblCnf, ///< CNF: Returns TX gain calibration table
SuperFemto_PrimId_SetTxCalibTblReq, ///< REQ: Set the TX gain calibration table
SuperFemto_PrimId_SetTxCalibTblCnf, ///< CNF: Confirm the use of the new TX gain calibration table
SuperFemto_PrimId_GetRxCalibTblReq, ///< REQ: Get the RX level calibration table
SuperFemto_PrimId_GetRxCalibTblCnf, ///< CNF: Returns RX level calibration table
SuperFemto_PrimId_SetRxCalibTblReq, ///< REQ: Set the RX level calibration table
SuperFemto_PrimId_SetRxCalibTblCnf, ///< CNF: Confirm the use of the new RX level calibration table
SuperFemto_PrimId_NUM
} SuperFemto_PrimId_t;
/****************************************************************************
* Enum : SuperFemto_ClkSrcId_t
************************************************************************//**
*
* Clock source intifiers.
*
* @ingroup superfemto_api
*
****************************************************************************/
typedef enum SuperFemto_ClkSrcId_t
{
// RF Diagnostic Primitives
SuperFemto_ClkSrcId_None = 0, ///< None
SuperFemto_ClkSrcId_Ocxo, ///< Optional on-board OCXO
SuperFemto_ClkSrcId_Tcxo, ///< Optional on-board TCXO
SuperFemto_ClkSrcId_External, ///< Multi-Trx external clock
SuperFemto_ClkSrcId_GpsPps, ///< GPS PPS
SuperFemto_ClkSrcId_Trx, ///< TRX clock
SuperFemto_ClkSrcId_Rx, ///< RX clock
SuperFemto_ClkSrcId_Edge, ///< Debug edge connector clock
SuperFemto_ClkSrcId_NetList ///< Network listening
} SuperFemto_ClkSrcId_t;
/****************************************************************************
* Types *
****************************************************************************/
/****************************************************************************
* Struct : SuperFemto_SystemInfoCnf_t
************************************************************************//**
*
* Structure is used to confirm the information about the system.
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_SystemInfoCnf
{
SuperFemto_Status_t status; ///< Status
struct
{
uint8_t major; ///< DSP firmware major version number
uint8_t minor; ///< DSP firmware minor version number
uint8_t build; ///< DSP firmware build version number
} dspVersion;
struct
{
uint8_t major; ///< FPGA firmware major version number
uint8_t minor; ///< FPGA firmware minor version number
uint8_t build; ///< FPGA firmware build version number
} fpgaVersion;
#ifdef HW_SYSMOBTS_V1
struct
{
uint8_t gsm850; ///< Support GSM-850 band (0:unsupported, 1:supported)
uint8_t gsm900; ///< Support GSM-900 band (0:unsupported, 1:supported)
uint8_t dcs1800; ///< Support GSM-1800 band (0:unsupported, 1:supported)
uint8_t pcs1900; ///< Support GSM-1900 band (0:unsupported, 1:supported)
} rfBand;
struct
{
uint8_t txvcxo; ///< TCVCXO presence flag
uint8_t ocvcxo; ///< OCVCXO presence flag
uint16_t u12ClkVc; ///< Current voltage control value
} rfClock;
#else
struct {
uint8_t rev; ///< Board reversion number
uint8_t option; ///< Board option number
} boardVersion;
#endif
} SuperFemto_SystemInfoCnf_t;
/****************************************************************************
* Struct : SuperFemto_SystemFailureInd_t
************************************************************************//**
*
* Structure is used to indicate a system failure.
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_SystemFailureInd
{
SuperFemto_Status_t status; ///< Status
} SuperFemto_SysemFailureInd_t;
/****************************************************************************
* Struct : SuperFemto_ActivateRfReq_t
************************************************************************//**
*
* This primitive is used to request the activation the RF section of the system.
*
* @ingroup superfemto_api
*
***************************************************************************/
typedef struct SuperFemto_ActivateRfReq
{
// Timing source (FN/TN)
struct
{
uint8_t u8TimSrc; ///< Timing source (0:Slave/Get timing from remote master BTS, 1:Master/Generates its own timing)
} timing;
// Message queue options
struct {
uint8_t u8UseTchMsgq; ///< Set to '1' to use a separate MSGQUEUE for TCH primitives
uint8_t u8UsePdtchMsgq; ///< Set to '1' to use a separate MSGQUEUE for PDTCH primitives
} msgq;
// RF options
struct
{
int iClkCor; ///< Clock correction value in PPB.
SuperFemto_ClkSrcId_t clkSrc; ///< Clock source (0:None, 1:OCXO, 2:TCXO, 3:External, 4:GPS PPS, 5:reserved, 6:RX, 7:Edge)
float fMaxTxPower; ///< Nominal maximum TX power in dBm
uint8_t u8UseExtAtten; ///< Use the external attenuator to control TX power (0:No, 1:Yes)
} rfTrx;
} SuperFemto_ActivateRfReq_t;
/****************************************************************************
* Struct : FemtoBts_ActivateRfReq_t
************************************************************************//**
*
* This primitive is used to request the activation the RF section of the system.
*
* @ingroup superfemto_api
*
***************************************************************************/
typedef struct FemtoBts_ActivateRfReq
{
uint16_t u12ClkVc; /**< Initial clock voltage control value
or 0xFFFF to use the defaultvalue */
} FemtoBts_ActivateRfReq_t;
/****************************************************************************
* Struct : SuperFemto_ActivateRfCnf_t
************************************************************************//**
*
* This primitive is used to confirm the activation the RF section of the system.
*
* @ingroup superfemto_api
*
***************************************************************************/
typedef struct SuperFemto_ActivateRfCnf
{
SuperFemto_Status_t status; ///< Status
} SuperFemto_ActivateRfCnf_t;
/****************************************************************************
* Struct : SuperFemto_DeactivateRfCnf_t
************************************************************************//**
*
* This primitive is used to confirm the deactivation the RF section of the system.
*
* @ingroup superfemto_api
*
***************************************************************************/
typedef struct SuperFemto_DeactivateRfCnf
{
SuperFemto_Status_t status; ///< Status
} SuperFemto_DeactivateRfCnf_t;
/****************************************************************************
* Struct : SuperFemto_SetTraceFlagsReq_t
************************************************************************//**
*
* This primitive is used to setup the trace flag values.
*
* @ingroup superfemto_api_prim_dbg
*
***************************************************************************/
typedef struct SuperFemto_SetTraceFlagsReq
{
uint32_t u32Tf; ///< Trace flag level
} SuperFemto_SetTraceFlagsReq_t;
/****************************************************************************
* Struct : FemtoBts_RfClockInfoReq
************************************************************************//**
*
* This primitive is used to retrive information about the RF clock
*
* @ingroup superfemto_api_prim_dbg
*
***************************************************************************/
typedef struct FemtoBts_RfClockInfoReq
{
uint8_t u8RstClkErrCnt; ///< When set, it resets the clk error counter module
} FemtoBts_RfClockInfoReq_t;
/****************************************************************************
* Struct : SuperFemto_RfClockInfoReq
************************************************************************//**
*
* This primitive is used to retrive information about the RF clock
*
* @ingroup superfemto_api_prim_dbg
*
***************************************************************************/
typedef struct SuperFemto_RfClockInfoReq
{
uint8_t u8RstClkCal; ///< Set to '1' to reset the calibration module
} SuperFemto_RfClockInfoReq_t;
/****************************************************************************
* Struct : FemtoBts_RfClockSetupReq
************************************************************************//**
*
* This primitive is used to configure the RF clock sub-system.
*
* @ingroup superfemto_api_prim_dbg
*
***************************************************************************/
typedef struct FemtoBts_RfClockSetupReq
{
uint16_t u12ClkVc; /**< Clock voltage control value (12 bits DAC). */
} FemtoBts_RfClockSetupReq_t;
/****************************************************************************
* Struct : SuperFemto_RfClockSetupReq
************************************************************************//**
*
* This primitive is used to configure the RF clock sub-system.
*
* @ingroup superfemto_api_prim_dbg
*
***************************************************************************/
typedef struct SuperFemto_RfClockSetupReq
{
// RF clock options
struct
{
int iClkCor; ///< Clock correction value in PPB.
SuperFemto_ClkSrcId_t clkSrc; ///< Clock source (0:None, 1:OCXO, 2:TCXO, 3:External, 4:GPS PPS, 5:reserved, 6:RX, 7:Edge)
} rfTrx;
// RF clock calibration
struct {
SuperFemto_ClkSrcId_t clkSrc; ///< Reference clock source (0:Off, 1:OCXO, 2:TCXO, 3:External, 4:GPS PPS, 5:reserved, 6:reserved, 7:Edge, 8:NL)
} rfTrxClkCal;
} SuperFemto_RfClockSetupReq_t;
/****************************************************************************
* Struct : SuperFemto_RfClockSetupCnf
************************************************************************//**
*
* This primitive is sent back to confirm the configuration of the RF clock sub-system.
*
* @ingroup superfemto_api_prim_dbg
*
***************************************************************************/
typedef struct SuperFemto_RfClockSetupCnf
{
SuperFemto_Status_t status; ///< Status of the RF-CLOCK-SETUP-REQ
} SuperFemto_RfClockSetupCnf_t;
/****************************************************************************
* Struct : FemtoBts_RfClockInfoCnf
************************************************************************//**
*
* This primitive is used to send back information on the RF clock sub-system.
*
* @ingroup superfemto_api_prim_dbg
*
***************************************************************************/
typedef struct FemtoBts_RfClockInfoCnf
{
uint8_t u8ClkErrValid; /**< Set when the parameter of this primitives are valid.
It won't be set if the system was unable to synchronize
to a surrounding basestation long enough */
float fClkErr; // Measured clock error (in ppm).
float fClkErrRes; /**< Indicates the resolution of the fErrPpm parameter (in ppm).
The resolution of the error depends on the period
(in frame) of the measurement. The longer the period,
the better is the resolution. */
} FemtoBts_RfClockInfoCnf_t;
/****************************************************************************
* Struct : SuperFemto_RfClockInfoCnf
************************************************************************//**
*
* This primitive is used to send back information on the RF clock sub-system.
*
* @ingroup superfemto_api_prim_dbg
*
***************************************************************************/
typedef struct SuperFemto_RfClockInfoCnf
{
// RF clock options
struct
{
int iClkCor; ///< Clock correction value in PPB.
SuperFemto_ClkSrcId_t clkSrc; ///< Clock source (0:None, 1:OCXO, 2:TCXO, 3:External, 4:GPS PPS, 5:reserved, 6:RX, 7:Edge)
} rfTrx;
// RF clock calibration
struct {
SuperFemto_ClkSrcId_t clkSrc; ///< Reference clock source (0:Off, 1:OCXO, 2:TCXO, 3:External, 4:GPS PPS, 5:reserved, 6:reserved, 7:Edge, 8:NL)
int iClkErr; ///< RF clock error (PPB).
int iClkErrRes; ///< Clock error resolution (PPT).
} rfTrxClkCal;
} SuperFemto_RfClockInfoCnf_t;
/****************************************************************************
* Struct : SuperFemto_Layer1ResetReq_t
************************************************************************//**
*
* Structure is used to request a reset of the layer 1 module.
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_Layer1ResetReq
{
uint32_t u32Reserved;
} SuperFemto_Layer1ResetReq_t;
/****************************************************************************
* Struct : SuperFemto_Layer1ResetCnf_t
************************************************************************//**
*
* Structure is used to confirm the reset of the layer 1 module.
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_Layer1ResetCnf
{
GsmL1_Status_t status;
} SuperFemto_Layer1ResetCnf_t;
/****************************************************************************
* Struct : SuperFemto_GetTxCalibTblReq_t
************************************************************************//**
*
* Structure is used to get the TX gain calibration table.
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_GetTxCalibTblReq
{
GsmL1_FreqBand_t freqBand; ///< GSM Frequency band
} SuperFemto_GetTxCalibTblReq_t;
/****************************************************************************
* Struct : SuperFemto_GetTxCalibTblCnf_t
************************************************************************//**
*
* Structure is used to returns the TX gain calibration table.
*
* TX_Gain = m[band] x (fTxPowerLevel + fGainCorrVsArfcn[band][arfcn]) + b[band]
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_GetTxCalibTblCnf
{
GsmL1_Status_t status;
GsmL1_FreqBand_t freqBand; ///< GSM Frequency band
float fTxGainGmsk[80]; ///< Gain setting for GMSK output level from +50dBm to -29 dBm
float fTx8PskCorr; ///< Gain adjustment for 8 PSK (default to +3.25 dB)
float fTxExtAttCorr[31]; ///< Gain adjustment for external attenuator (0:@1dB, 1:@2dB, ..., 31:@32dB)
float fTxRollOffCorr[374]; /**< Gain correction for each ARFCN
for GSM-850 : 0=128, 1:129, ..., 123:251, [124-373]:unused
for GSM-900 : 0=955, 1:956, ..., 70:1, ..., 317:956, [318-373]:unused
for DCS-1800: 0=512, 1:513, ..., 373:885
for PCS-1900: 0=512, 1:513, ..., 298:810, [299-373]:unused */
} SuperFemto_GetTxCalibTblCnf_t;
/****************************************************************************
* Struct : SuperFemto_SetTxCalibTblReq_t
************************************************************************//**
*
* Structure is used to set the TX gain calibration table.
*
* TX_Gain = m[band] x (fTxPowerLevel + fGainCorrVsArfcn[band][arfcn]) + b[band]
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_SetTxCalibTblReq
{
GsmL1_FreqBand_t freqBand; ///< GSM Frequency band
float fTxGainGmsk[80]; ///< Gain setting for GMSK output level from +50dBm to -29 dBm
float fTx8PskCorr; ///< Gain adjustment for 8 PSK (default to +3.25 dB)
float fTxExtAttCorr[31]; ///< Gain adjustment for external attenuator (0:@1dB, 1:@2dB, ..., 31:@32dB)
float fTxRollOffCorr[374]; /**< Gain correction for each ARFCN
for GSM-850 : 0=128, 1:129, ..., 123:251, [124-373]:unused
for GSM-900 : 0=955, 1:956, ..., 70:1, ..., 317:956, [318-373]:unused
for DCS-1800: 0=512, 1:513, ..., 373:885
for PCS-1900: 0=512, 1:513, ..., 298:810, [299-373]:unused */
} SuperFemto_SetTxCalibTblReq_t;
/****************************************************************************
* Struct : SuperFemto_SetTxCalibTblCnf_t
************************************************************************//**
*
* Structure is used to confirm the use of the new TX gain calibration table.
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_SetTxCalibTblCnf
{
GsmL1_Status_t status;
GsmL1_FreqBand_t freqBand; ///< GSM Frequency band
} SuperFemto_SetTxCalibTblCnf_t;
/****************************************************************************
* Struct : SuperFemto_GetRxCalibTblReq_t
************************************************************************//**
*
* Structure is used to get the RX level calibration table.
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_GetRxCalibTblReq
{
GsmL1_FreqBand_t freqBand; ///< GSM Frequency band
uint8_t bUplink; ///< Direction (0:Downlink, 1:Uplink)
} SuperFemto_GetRxCalibTblReq_t;
/****************************************************************************
* Struct : SuperFemto_GetRxCalibTblCnf_t
************************************************************************//**
*
* Structure is used to returns the RX level calibration table.
*
* RSSI = RxLevel + fRssiCorrVsArfcn[band][arfcn]
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_GetRxCalibTblCnf
{
GsmL1_Status_t status;
GsmL1_FreqBand_t freqBand; ///< GSM Frequency band
uint8_t bUplink; ///< Direction (0:Downlink, 1:Uplink)
float fExtRxGain; ///< External RX gain
float fRxMixGainCorr; ///< Mixer gain error compensation
float fRxLnaGainCorr[3]; ///< LNA gain error compensation (1:@-12 dB, 2:@-24 dB, 3:@-36 dB)
float fRxRollOffCorr[374]; /***< Frequency roll-off compensation
for GSM-850 : 0=128, 1:129, ..., 123:251, [124-373]:unused
for GSM-900 : 0=955, 1:956, ..., 70:1, ..., 317:956, [318-373]:unused
for DCS-1800: 0=512, 1:513, ..., 373:885
for PCS-1900: 0=512, 1:513, ..., 298:810, [299-373]:unused */
uint8_t u8IqImbalMode; ///< IQ imbalance mode (0:off, 1:on, 2:auto)
uint16_t u16IqImbalCorr[4]; ///< IQ imbalance compensation
} SuperFemto_GetRxCalibTblCnf_t;
/****************************************************************************
* Struct : SuperFemto_SetRxCalibTblReq_t
************************************************************************//**
*
* Structure is used to set the RX level calibration table.
*
* RSSI = RxLevel + fRssiCorrVsArfcn[band][arfcn]
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_SetRxCalibTblReq
{
GsmL1_FreqBand_t freqBand; ///< GSM Frequency band
uint8_t bUplink; ///< Direction (0:Downlink, 1:Uplink)
float fExtRxGain; ///< External RX gain
float fRxMixGainCorr; ///< Mixer gain error compensation
float fRxLnaGainCorr[3]; ///< LNA gain error compensation (1:@-12 dB, 2:@-24 dB, 3:@-36 dB)
float fRxRollOffCorr[374]; /***< Frequency roll-off compensation
for GSM-850 : 0=128, 1:129, ..., 123:251, [124-373]:unused
for GSM-900 : 0=955, 1:956, ..., 70:1, ..., 317:956, [318-373]:unused
for DCS-1800: 0=512, 1:513, ..., 373:885
for PCS-1900: 0=512, 1:513, ..., 298:810, [299-373]:unused */
uint8_t u8IqImbalMode; ///< IQ imbalance mode (0:off, 1:on, 2:auto)
uint16_t u16IqImbalCorr[4]; ///< IQ imbalance compensation
} SuperFemto_SetRxCalibTblReq_t;
/****************************************************************************
* Struct : SuperFemto_SetRxCalibTblCnf_t
************************************************************************//**
*
* Structure is used to confirm the use of the new RX level calibration table.
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_SetRxCalibTblCnf
{
GsmL1_Status_t status;
GsmL1_FreqBand_t freqBand; ///< GSM Frequency band
uint8_t bUplink; ///< Direction (0:Downlink, 1:Uplink)
} SuperFemto_SetRxCalibTblCnf_t;
/****************************************************************************
* Struct : SuperFemto_Primt_t
************************************************************************//**
*
* System level primitive definition.
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
typedef struct SuperFemto_Prim
{
SuperFemto_PrimId_t id; ///< Primitive ID
union
{
SuperFemto_SystemInfoCnf_t systemInfoCnf; ///< CNF: System information
SuperFemto_SysemFailureInd_t sysemFailureInd; ///< IND: System failure indication
#ifdef HW_SYSMOBTS_V1
FemtoBts_ActivateRfReq_t activateRfReq; ///< REQ: Request activation of the RF section
#else
SuperFemto_ActivateRfReq_t activateRfReq; ///< REQ: Activation of the RF section
#endif
SuperFemto_ActivateRfCnf_t activateRfCnf; ///< CNF: Activation of the RF section
SuperFemto_DeactivateRfCnf_t deactivateRfCnf; ///< CNF: Deactivation of the RF section
SuperFemto_SetTraceFlagsReq_t setTraceFlagsReq; ///< REQ: Set the verbosity of the system
#ifdef HW_SYSMOBTS_V1
FemtoBts_RfClockInfoReq_t rfClockInfoReq; ///< REQ: Request information about the RF clock
FemtoBts_RfClockInfoCnf_t rfClockInfoCnf; ///< CNF: Returns information about the RF clock
FemtoBts_RfClockSetupReq_t rfClockSetupReq; ///< REQ: Setup the RF clock
#else
SuperFemto_RfClockInfoReq_t rfClockInfoReq; ///< REQ: Information about the RF clock sub-system
SuperFemto_RfClockInfoCnf_t rfClockInfoCnf; ///< CNF: Returns the RF clock sub-system information
SuperFemto_RfClockSetupReq_t rfClockSetupReq; ///< REQ: Configure the RF clock sub-system
#endif
SuperFemto_RfClockSetupCnf_t rfClockSetupCnf; ///< CNF: Confirm the configuration of the RF clock sub-system
SuperFemto_Layer1ResetReq_t layer1ResetReq; ///< REQ: Trigger a reset of the GSM layer 1 module
SuperFemto_Layer1ResetCnf_t layer1ResetCnf; ///< CNF: Confirm that the GSM layer 1 module was reset
SuperFemto_GetTxCalibTblReq_t getTxCalibTblReq; ///< REQ: Get the TX gain calibration table
SuperFemto_GetTxCalibTblCnf_t getTxCalibTblCnf; ///< CNF: Returns TX gain calibration table
SuperFemto_SetTxCalibTblReq_t setTxCalibTblReq; ///< REQ: Set the TX gain calibration table
SuperFemto_SetTxCalibTblCnf_t setTxCalibTblCnf; ///< CNF: Confirm the use of the new TX gain calibration table
SuperFemto_GetRxCalibTblReq_t getRxCalibTblReq; ///< REQ: Get the RX level calibration table
SuperFemto_GetRxCalibTblCnf_t getRxCalibTblCnf; ///< CNF: Returns RX level calibration table
SuperFemto_SetRxCalibTblReq_t setRxCalibTblReq; ///< REQ: Set the RX level calibration table
SuperFemto_SetRxCalibTblCnf_t setRxCalibTblCnf; ///< CNF: Confirm the use of the new RX level calibration table
} u;
} SuperFemto_Prim_t;
#ifdef _TMS320C6400
/****************************************************************************
* Public Functions *
****************************************************************************/
/****************************************************************************
* Function : SuperFemto_RxPrimCallback
************************************************************************//**
*
* SuperFemto primitive reception callback routine. Process primitives sent
* by the ARM processor.
*
* @param [in] pPrim
* Address of the buffer containing the received primitive.
*
* @return
* GsmL1_Status_Success or the error code
*
* @ingroup superfemto_api_prim_sys
*
****************************************************************************/
void SuperFemto_RxPrimCallback( SuperFemto_Prim_t *pPrim );
#endif // _TMS320C6400
#ifdef __cplusplus
}
#endif // extern "C"
#endif // SUPERFEMTO_H__
Reference in New Issue View Git Blame Copy Permalink