Default environment version 2
=============================

barebox has its environment files under /env/. Most of the runtime configuration
takes place under /env/. The environment is comparable to a tar archive which is
unpacked from a storage medium during startup. If for whatever reason the environment
cannot be loaded from a storage medium, a compiled-in default environment is used
instead.

The environment is not automatically stored on the storage medium when a file
under /env/ is changed, instead this has to be done manually using the
:ref:`command_saveenv` command.

There are two sets of generic environment files which can be used. The older one
should not be used for new boards and is not described here. New boards should use
defaultenv-2 instead.

The default environment is composed from different directories during compilation::

  defaultenv/defaultenv-2-base   -> base files
  defaultenv/defaultenv-2-dfu    -> overlay for DFU
  defaultenv/defaultenv-2-menu   -> overlay for menus
  arch/$ARCH/boards/<board>/env  -> board specific overlay

The content of the above directories is applied one after another. If the
same file exists in a later overlay, it will overwrite the preceding one.

/env/bin/init
-------------

This script is executed by the barebox startup code after initialization.
In the defaultenv-2 it will add some global variables and executes the scripts
in /env/init/. It is also responsible for printing the boot timeout prompt.
Be careful with changes to this script: since it is executed before any user
intervention, it might lock the system.

/env/init/
----------

/env/init/ is the place for startup scripts. The scripts in this directory
will be executed in alphabetical order by the /env/bin/init script.

/env/boot/
----------

/env/boot/ contains boot entry scripts. the :ref:`command_boot` command treats
the files in this directory as possible boot targets. See :ref:`booting_linux`
for more details.

/env/config
-----------

This file contains some basic configuration settings. It can be edited using
the :ref:`command_edit` command. Typical content:

.. code-block:: sh

  #!/bin/sh

  # change network settings in /env/network/eth0
  # change mtd partition settings and automountpoints in /env/init/*

  #global.hostname=

  # set to false if you do not want to have colors
  #global.allow_color=true

  # user (used for network filenames)
  #global.user=none

  # timeout in seconds before the default boot entry is started
  #global.autoboot_timeout=3

  # list of boot entries. These are executed in order until one
  # succeeds. An entry can be:
  # - a filename in /env/boot/
  # - a full path to a directory. All files in this directory are
  #   treated as boot files and executed in alphabetical order
  #global.boot.default=net

  # base bootargs
  #global.linux.bootargs.base="console=ttyS0,115200"

When changing this file remember to do a ``saveenv`` to make the change
persistent. Also it may be necessary to manually ``source /env/config`` before
the changes take effect.

/env/network/
-------------

This contains the configuration files for the network interfaces. Typically
there will be a file ``eth0`` with a content like this:

.. code-block:: sh

  #!/bin/sh

  # ip setting (static/dhcp)
  ip=dhcp
  global.dhcp.vendor_id=barebox-${global.hostname}

  # static setup used if ip=static
  ipaddr=
  netmask=
  gateway=
  serverip=

  # MAC address if needed
  #ethaddr=xx:xx:xx:xx:xx:xx

  # put code to discover eth0 (i.e. 'usb') to /env/network/eth0-discover

  exit 0