automount_mount calls run_command which may trigger an automount
again. This results in an endless loop. A simple way to trigger
this is:
mkdir /x; automount /x false; cd /x; something
Use a static variable to detect if we are currently in automount_mount()
and bail out if we are.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
At least NFS does not fulfill read requests > 1024 bytes at once.
Use read_full in read_file as read doesn't guarantee that the
whole request can be read at once.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Similar to mount(8) the barebox command mount now supports passing a string
to the file system driver via -o.
This is used in the next commit to let the user specify port numbers for
nfs mounts.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A chdir to a path registered as an automount path followed by a 'ls'
results in an endless loop. This happens because the command the
automounter executes results in another automount request.
Fix this by running the automounter from the chdir code before
the cwd is actually changed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The O_TRUNC flag has to be ignored when opening devices. Otherwise
cp /somefile /dev/somedev fails. This is broken since:
| commit d4f5bb1e01
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date: Sat Sep 28 13:12:50 2013 +0200
|
| copy_file: Add missing O_TRUNC
|
| Without it, when copying a smaller file over a larger file the
| resulting file still has the remaining space from the larger file.
|
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All filesystem drivers which need a backingstore device do the same
ignoring of '/dev/' in the backingstore followed by a cdev_open. Add a
helper function for it and let the core handle the cdev. As a side
effect this makes sure that fsdev->cdev is also set when a device is
mounted without the leading '/dev/' which was previously ignored
by the mount code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some tftp servers (for example netkit-tftp) do not pass the filesize.
Add a workaround for read_file which reads the file into a temporary
file which then is copied to a buffer.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some systems are runnignfrom a very limited SRAM, but have a huge
malloc space in SDRAM. The bss normally is in SRAM, so we should
avoid having big structures there. The FILE table is 5120 bytes
big, so allocate it dynamically instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add pread and pwrite functions.
Split read and write functions to save some space.
The functions pread and pwrite saves and sets the file
position to a given offset and restore them afterwards.
This also makes the nandtest command use these function
which is necessary to not break compilation for the nandtest
command.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
dev_add_child is a very unsafe function. If called multiple times
it allows setting the same device to different parents thus corrupting
the siblings list. This happens regularly since:
| commit c2e568d19c
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| Date: Sat Nov 3 16:11:05 2012 +0100
|
| bus: add bus device
|
| automatically add it as parent of any bus device if none already specified
|
| we have now a nice output per bus
If for example a FATfs is mounted this nice output per bus often ends with:
> `---- fat0
> `---- 0
> `---- 0x86f0000087020031-0x86f000410df27124: /dev/<NULL>
> `---- sram00
> `---- 0x00000000-0xffffffffffffffff: /dev/<NULL>
> `---- 0x00000000-0xffffffffffffffff: /dev/<NULL>
> unable to handle NULL pointer dereference at address 0x0000000c
> pc : [<87f08a20>] lr : [<87f08a04>]
> sp : 86eff8c0 ip : 87f3fbde fp : ffffffff
> r10: ffffffff r9 : 00000000 r8 : 00000003
> r7 : 86f075b8 r6 : 00000002 r5 : ffffffec r4 : 86f07544
> r3 : 00000000 r2 : 43f900b4 r1 : 00000020 r0 : 00000005
> Flags: Nzcv IRQs off FIQs off Mode SVC_32
> [<87f08a20>] (do_devinfo_subtree+0x90/0x130) from [<87f08a90>] (do_devinfo_subtree+0x100/0x130)
>
> [<87f3e070>] (unwind_backtrace+0x0/0x90) from [<87f28514>] (panic+0x28/0x3c)
> [<87f28514>] (panic+0x28/0x3c) from [<87f3e4b8>] (do_exception+0x10/0x14)
> [<87f3e4b8>] (do_exception+0x10/0x14) from [<87f3e544>] (do_data_abort+0x2c/0x38)
> [<87f3e544>] (do_data_abort+0x2c/0x38) from [<87f3e268>] (data_abort+0x48/0x60)
This patch fixes this by adding a device to its parents children list in
register_device so that dev_add_child is no longer needed. This function
is removed from the tree. Now callers of register_device have to clearly
set the parent *before* registering a device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Jan Lübbe <jlu@pengutronix.de>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix casting on min argument, to avoid warnings on 64bit build.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For compatibility put a inline on lstat for stat until we have the symlink
support.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
The standard devices are currently broken since they have
the size ~0. As now files use loff_t as file size which is a signed
type the read implementation gets confused and now returns -1.
The current implementation also has the (somewhat theorical) problem
that we do not have real streaming devices, so /dev/zero went out
of zeroes after reading 4GB (or now LLONG_MAX).
This patch introduces a new cdev flag DEVFS_IS_CHARACTER_DEV and a new
file size flag FILE_SIZE_STREAM which makes it possible to create
real stream devices instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Storing the size instead of the resource end in struct resource was
a mistake. 'size' ranges from 0 to UINT[32|64]_MAX + 1 which obviously
leads to problems. 'end' on the other hand will never exceed
UINT[32|64]_MAX. Also this way we can express a iomem region covering
the whole address space.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When creating a file or a directory we have to check if the parent
is actually a directory. Otherwise trying it results in a crash.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Passing a too large size or offset to erase could
affect flash outside the partition boundary.
Addresses for SPI flash wrap around, thus giving a
count + offset going past the end of the flash would
wrap around and erase flash at offset 0.
Add the same check for protect.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The patch making errno a positive value has another bug:
lseek was switched to return -errno instead of -1. This does not
work since we can lseek we can address the whole 4G address space,
have of which has a negative offset when interpreted as a signed
integer. Let lseek return -1 on failure again instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This got lost in:
commit 6188685091
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date: Sun May 13 12:43:58 2012 +0200
Make errno a positive value
Normally errno contains a positive error value. A certain unnamed developer
mixed this up while implementing U-Boot-v2. Also, normally errno is never
set to zero by any library function.
This patch fixes this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Normally errno contains a positive error value. A certain unnamed developer
mixed this up while implementing U-Boot-v2. Also, normally errno is never
set to zero by any library function.
This patch fixes this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This makes it possible to pass a command sequence to the automount
command instead of only a script (a command sequence would get confused
by the additional argument)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to simply answer with -ENOENT in open() when the
initial call to stat() failed. Instead, forward the error from
stat().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds an automount command which makes it possible
to execute a script when a certain directory is first accessed.
It's the commands responsibility to make this directory available
(bringing devices up and mounting it). This results in automount
support which makes sure that from the shell every file can
be accessed without having to care for device bringup. Bringing
up devices may be expensive (USB, dhcp). The automount support
makes it easy for the environment to bringup devices when they
are actually needed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
every struct fs_device_d contains a struct mtab_entry, so they
have a 1:1 relationship. Instead of having to use container_of
to get from a struct mtab_entry to a struct fs_device_d we can
better embed the members of struct mtab_entry into struct fs_device_d
directly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
get_fs_device_by_path returns a struct device_d instead of what the
name suggests a struct fs_device_d. Also it returns the rootpath
of the corresponding fs_device. This patch changes the name of
this function to get_fs_device_and_root_path to better reflect what
the function does and changes the return type to struct fs_device_d.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Uwe Kleine-König
Alexander Aring
Vicente
Jean-Christophe PLAGNIOL-VILLARD
Alexander Aring
Johannes Stezenbach