This patch adds the crc32 command to be build
as host and optionally as target tool.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
CONFIG_MAXARGS is only used with the simple console support, so add
a 'depends on'. While at it, move it below the shell selection.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a tool for installing kernels according to the bootloader
spec. systemd already has a similar tool, but it is limited to installing
kernels on the currently running system. The barebox kernel-install
tool instead can also be used to install kernels on removable media on a
development host for cross development. It is compiled in two variants,
as 'kernel-install' for the host and as 'kernel-install-target' using
$CROSS_COMPILE.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Bootloader Specification describes a way how kernels can
be installed on devices and how they can be started by the bootloader.
The bootloader spec is currently supported by (x86) gummiboot and
by systemd which provides a kernel-install script. With the bootloader
spec it's possible for the Operating system to install a new kernel
without knowing about the bootloader and for the bootloader it's possible
to discover and start Operating Systems on a media without being
configured.
For more details about the spec see:
http://www.freedesktop.org/wiki/Specifications/BootLoaderSpec/
This patch adds barebox support for the spec. It enhances the 'boot'
command so that not only boot script names can be given, but also
devices containing bootloader spec entries. With this it's possible
to call the 'boot' command like: 'boot sd emmc net'. It would then
first look for bootloader spec entries on the (removable) sd card,
then, is nothing is found, on the internal emmc and if still
unsuccessful would call the 'net' bootscript.
The bootloader Spec currently doesn't specify which entry should be
default if multiple entries are found on a single device. Therefore
barebox currently has two extensions of the spec. The $BOOT diretory
can contain a file named 'default'. If present, the content of the
file is treated as a filename under $BOOT/loader/entries/ which is
used as default. Similarly if a file named 'once' is present, the
entry is started once and the file is removed afterwards. This is
useful for testing if a newly installed kernel works before making
it the default.
As on ARM and other Architectures a devicetree has to be specified
for the kernel, the 'devicetree' property is used to specify a
devicetree. Like 'kernel' and 'initrd' this also contains a pth
relative to $BOOT.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This replaces the 'boot' script in the defaultenv-2 with a command
with the same behaviour. A command gives more flexibility for future
externsions
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this the verbosity of barebox can be controlled during runtime
using the 'loglevel' globalvar.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
even if the env is broken you will have a password
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this all code uses barebox_get_model() and no longer
a compile time generated string.
Also this renames barebox_boardinfo() to barebox_get_model()
since we are going to add the corresponding _set_ function
and 'model' corresponds to the devicetree notion.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The CONFIG_PANIC_HANG a part of the U-Boot heritage.
It is used in the barebox code, but there is no mention
of this option in Kconfig files.
Sometimes this option is very helpful, so
let's resurrect it.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Being able to trace initcall is very useful when trying to
find out where startup hangs. This adds a kconfig option for
it to make it easier to access.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ENABLE_DEVICE_NOISE is used only in two network drivers and is
otherwise unused. ENABLE_FLASH_NOISE is completely unused.
ENABLE_PARTITION_NOISE enables DEBUG in the partition command,
but this code has no debug messages at all.
Remove all this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Much of the bootm code is implemented in the command itself. Move
it to a common place to be able to call it from C aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For making the same binary executable on different SoCs which have
different DRAM addresses we have to be independent of the compile
time link address.
This patch adds relocatable binary support for the ARM architecture.
With this two new functions are available. relocate_to_current_adr
will fixup the binary to continue executing from the current position.
relocate_to_adr will copy the binary to a given address, fixup the
binary and continue executing from there.
For the PBL and the real image relocatable support can be enabled
independently. This is done to (hopefully) better cope with setups
where the PBL runs from SRAM or ROM and the real binary does not.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows to boot a sequence of boot entries until one succeeds.
boot sources can be passed in $global.boot.default, which is now treated
as a list. Also a list of boot entries can be specified as arguments
to the boot script. The entries can be:
- a plain filename from /env/boot/
- a full path to an arbitrary file
- a directory containing boot entries
With this this command:
boot net nand-ubi /env/boot.d
would first use the /env/boot/net entry, if this fails the /env/boot/nand-ubi
entry and if this also fails the files from /env/boot.d/ (which could also
be links to boot scripts)
To make the above the default, global.boot.default would be specified as:
global.boot.default="net nand-ubi /env/boot.d"
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can support multiple format
use filetpye to detect the parser to use
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This optionally enabled the MMU in the PBL or during early startup for
the non PBL case. The regular MMU init code will pickup the already enabled
MMU later. This might complicate debugging early code, so this has been
made optional.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so it more easy to add new entry and to maintain
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to have no console support
Use full for bootstrap as we can save 6.5 KiB (barebox.bin) and
3.8 KiB (zbarebox.bin lzo) on at91sam9263 as example vs console simple
As on bootstrap we have often very limited size.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can add easly the console_none support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently Kconfig dependencies are used to allow non-interactive builds.
This leads to problems in Kconfig getting the dependencies right.
This patch adds a barebox_main function pointer which is called at the
end of the startup process. This defaults to run_shell when a shell is
enabled.
With this the HAVE_NOSHELL Kconfig variable can be removed. Non interactive
builds can now be enabled for every board allowing to compile a binary
without further Kconfig dependencies. This also allows for more flexibility,
for example boards may decide to try non-interactive startup first and
call run_shell if that fails.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format, removing
extraneous lines and spaces. No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently in-system update means to write an arbitrary file to
an arbitrary device. There is no sanity check if the flashed image
is of the right type or will fit onto the device. Furthermore some
SoCs need a special preparation step for their images before
flashing them.
This adds a barebox in-system update infrastructure. Boards can
register update handlers which know how to make the board bootable.
The available handlers can be listed to be able to select one,
different force levels give the user the chance to know it better.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use a choice for the CONSOLE_ACTIVATE_* variables, which is the natural
way of specifying mutually exclusive variabled in Kconfig. Also update
the help texts a bit.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to do not have 2 set of var for defaultenv and the new
defaultenv-2.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This is unused now and not needed. We have a board_init_lowlevel. If a
board needs some architecture setup it can always call it from its
board_init_lowlevel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows for creating a lzo compressed binary unsing the pbl.
Only copy the piggydata if needed.
Add CONFIG_PBL_FORCE_PIGGYDATA_COPY option
In some case we need to copy the PIGGYDATA as the link address
as example we run from SRAM and shutdown the SDRAM/DDR for
reconfiguration but most of the time we just need to copy the
executable code.
based on Sascha Hauer
Add compressed image support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This allows for creating a pre-bootloader binary for
- nand boot
- mmc boot
- compressed image
The pbl will be incharge of the lowlevel init if needed.
The barebox will skip it.
Import string functions from linux 3.4 (arch/arm/boot/compressed/string.c) and
implement a dummy panic.
For now on introduce dummy zbarebox* targets and c code that will contain later
the decompressor. This only implemeted on ARM.
This patch is based on Sascha Hauer <s.hauer@pengutronix.de>
Add compressed image support patch
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Michael Grzeschik
Sascha Hauer
Jean-Christophe PLAGNIOL-VILLARD
Antony Pavlov
Alexander Shiyan
Jan Luebbe