295 lines
8.3 KiB
Diff
295 lines
8.3 KiB
Diff
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
|
|
index 0aca451..d58e8b0 100644
|
|
--- a/arch/arm/mach-kirkwood/Kconfig
|
|
+++ b/arch/arm/mach-kirkwood/Kconfig
|
|
@@ -38,6 +38,13 @@ config MACH_TS219
|
|
Say 'Y' here if you want your kernel to support the
|
|
QNAP TS-119 and TS-219 Turbo NAS devices.
|
|
|
|
+config MACH_TS41X
|
|
+ bool "QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS"
|
|
+ help
|
|
+ Say 'Y' here if you want your kernel to support the
|
|
+ QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
|
|
+ devices.
|
|
+
|
|
config MACH_OPENRD_BASE
|
|
bool "Marvell OpenRD Base Board"
|
|
help
|
|
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
|
|
index 80ab0ec..0c79ced 100644
|
|
--- a/arch/arm/mach-kirkwood/Makefile
|
|
+++ b/arch/arm/mach-kirkwood/Makefile
|
|
@@ -6,6 +6,7 @@ obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
|
|
obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
|
|
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
|
|
obj-$(CONFIG_MACH_TS219) += ts219-setup.o
|
|
+obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o
|
|
obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o
|
|
obj-$(CONFIG_MACH_OPENRD_CLIENT) += openrd_client-setup.o
|
|
|
|
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
|
|
--- /dev/null 2008-06-15 07:07:41.000000000 +0000
|
|
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c 2009-11-03 16:45:13.000000000 +0000
|
|
@@ -0,0 +1,253 @@
|
|
+/*
|
|
+ *
|
|
+ * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup
|
|
+ *
|
|
+ * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
|
|
+ * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or
|
|
+ * modify it under the terms of the GNU General Public License
|
|
+ * as published by the Free Software Foundation; either version
|
|
+ * 2 of the License, or (at your option) any later version.
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/mtd/physmap.h>
|
|
+#include <linux/spi/flash.h>
|
|
+#include <linux/spi/spi.h>
|
|
+#include <linux/spi/orion_spi.h>
|
|
+#include <linux/i2c.h>
|
|
+#include <linux/mv643xx_eth.h>
|
|
+#include <linux/ata_platform.h>
|
|
+#include <linux/gpio_keys.h>
|
|
+#include <linux/input.h>
|
|
+#include <linux/timex.h>
|
|
+#include <linux/serial_reg.h>
|
|
+#include <linux/pci.h>
|
|
+#include <asm/mach-types.h>
|
|
+#include <asm/mach/arch.h>
|
|
+#include <mach/kirkwood.h>
|
|
+#include "common.h"
|
|
+#include "mpp.h"
|
|
+
|
|
+/****************************************************************************
|
|
+ * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
|
|
+ * partitions on the device because we want to keep compatability with
|
|
+ * the QNAP firmware.
|
|
+ * Layout as used by QNAP:
|
|
+ * 0x00000000-0x00080000 : "U-Boot"
|
|
+ * 0x00200000-0x00400000 : "Kernel"
|
|
+ * 0x00400000-0x00d00000 : "RootFS"
|
|
+ * 0x00d00000-0x01000000 : "RootFS2"
|
|
+ * 0x00080000-0x000c0000 : "U-Boot Config"
|
|
+ * 0x000c0000-0x00200000 : "NAS Config"
|
|
+ *
|
|
+ * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
|
|
+ * used by the QNAP TS-109/TS-209.
|
|
+ *
|
|
+ ***************************************************************************/
|
|
+
|
|
+static struct mtd_partition qnap_ts41x_partitions[] = {
|
|
+ {
|
|
+ .name = "U-Boot",
|
|
+ .size = 0x00080000,
|
|
+ .offset = 0,
|
|
+ .mask_flags = MTD_WRITEABLE,
|
|
+ }, {
|
|
+ .name = "Kernel",
|
|
+ .size = 0x00200000,
|
|
+ .offset = 0x00200000,
|
|
+ }, {
|
|
+ .name = "RootFS1",
|
|
+ .size = 0x00900000,
|
|
+ .offset = 0x00400000,
|
|
+ }, {
|
|
+ .name = "RootFS2",
|
|
+ .size = 0x00300000,
|
|
+ .offset = 0x00d00000,
|
|
+ }, {
|
|
+ .name = "U-Boot Config",
|
|
+ .size = 0x00040000,
|
|
+ .offset = 0x00080000,
|
|
+ }, {
|
|
+ .name = "NAS Config",
|
|
+ .size = 0x00140000,
|
|
+ .offset = 0x000c0000,
|
|
+ },
|
|
+};
|
|
+
|
|
+static const struct flash_platform_data qnap_ts41x_flash = {
|
|
+ .type = "m25p128",
|
|
+ .name = "spi_flash",
|
|
+ .parts = qnap_ts41x_partitions,
|
|
+ .nr_parts = ARRAY_SIZE(qnap_ts41x_partitions),
|
|
+};
|
|
+
|
|
+static struct spi_board_info __initdata qnap_ts41x_spi_slave_info[] = {
|
|
+ {
|
|
+ .modalias = "m25p80",
|
|
+ .platform_data = &qnap_ts41x_flash,
|
|
+ .irq = -1,
|
|
+ .max_speed_hz = 20000000,
|
|
+ .bus_num = 0,
|
|
+ .chip_select = 0,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
|
|
+ I2C_BOARD_INFO("s35390a", 0x30),
|
|
+};
|
|
+
|
|
+static struct mv643xx_eth_platform_data qnap_ts41x_ge00_data = {
|
|
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
|
|
+};
|
|
+
|
|
+static struct mv643xx_eth_platform_data qnap_ts41x_ge01_data = {
|
|
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
|
|
+};
|
|
+
|
|
+static struct mv_sata_platform_data qnap_ts41x_sata_data = {
|
|
+ .n_ports = 2,
|
|
+};
|
|
+
|
|
+static struct gpio_keys_button qnap_ts41x_buttons[] = {
|
|
+ {
|
|
+ .code = KEY_COPY,
|
|
+ .gpio = 43,
|
|
+ .desc = "USB Copy",
|
|
+ .active_low = 1,
|
|
+ },
|
|
+ {
|
|
+ .code = KEY_RESTART,
|
|
+ .gpio = 37,
|
|
+ .desc = "Reset",
|
|
+ .active_low = 1,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct gpio_keys_platform_data qnap_ts41x_button_data = {
|
|
+ .buttons = qnap_ts41x_buttons,
|
|
+ .nbuttons = ARRAY_SIZE(qnap_ts41x_buttons),
|
|
+};
|
|
+
|
|
+static struct platform_device qnap_ts41x_button_device = {
|
|
+ .name = "gpio-keys",
|
|
+ .id = -1,
|
|
+ .num_resources = 0,
|
|
+ .dev = {
|
|
+ .platform_data = &qnap_ts41x_button_data,
|
|
+ }
|
|
+};
|
|
+
|
|
+static unsigned int qnap_ts41x_mpp_config[] __initdata = {
|
|
+ MPP0_SPI_SCn,
|
|
+ MPP1_SPI_MOSI,
|
|
+ MPP2_SPI_SCK,
|
|
+ MPP3_SPI_MISO,
|
|
+ MPP6_SYSRST_OUTn,
|
|
+ MPP7_PEX_RST_OUTn,
|
|
+ MPP8_TW_SDA,
|
|
+ MPP9_TW_SCK,
|
|
+ MPP10_UART0_TXD,
|
|
+ MPP11_UART0_RXD,
|
|
+ MPP13_UART1_TXD, /* PIC controller */
|
|
+ MPP14_UART1_RXD, /* PIC controller */
|
|
+ MPP15_SATA0_ACTn,
|
|
+ MPP16_SATA1_ACTn,
|
|
+ MPP20_GE1_0,
|
|
+ MPP21_GE1_1,
|
|
+ MPP22_GE1_2,
|
|
+ MPP23_GE1_3,
|
|
+ MPP24_GE1_4,
|
|
+ MPP25_GE1_5,
|
|
+ MPP26_GE1_6,
|
|
+ MPP27_GE1_7,
|
|
+ MPP30_GE1_10,
|
|
+ MPP31_GE1_11,
|
|
+ MPP32_GE1_12,
|
|
+ MPP33_GE1_13,
|
|
+ MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */
|
|
+ MPP37_GPIO, /* Reset button */
|
|
+ MPP43_GPIO, /* USB Copy button */
|
|
+ MPP44_GPIO, /* Board ID: 0: TS-419U, 1: TS-419 */
|
|
+ MPP45_GPIO, /* JP1: 0: console, 1: LCD */
|
|
+ MPP46_GPIO, /* External SATA HDD1 error indicator */
|
|
+ MPP47_GPIO, /* External SATA HDD2 error indicator */
|
|
+ MPP48_GPIO, /* External SATA HDD3 error indicator */
|
|
+ MPP49_GPIO, /* External SATA HDD4 error indicator */
|
|
+ 0
|
|
+};
|
|
+
|
|
+
|
|
+/*****************************************************************************
|
|
+ * QNAP TS-x19 specific power off method via UART1-attached PIC
|
|
+ ****************************************************************************/
|
|
+
|
|
+#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
|
|
+
|
|
+void qnap_ts41x_power_off(void)
|
|
+{
|
|
+ /* 19200 baud divisor */
|
|
+ const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
|
|
+
|
|
+ pr_info("%s: triggering power-off...\n", __func__);
|
|
+
|
|
+ /* hijack UART1 and reset into sane state (19200,8n1) */
|
|
+ writel(0x83, UART1_REG(LCR));
|
|
+ writel(divisor & 0xff, UART1_REG(DLL));
|
|
+ writel((divisor >> 8) & 0xff, UART1_REG(DLM));
|
|
+ writel(0x03, UART1_REG(LCR));
|
|
+ writel(0x00, UART1_REG(IER));
|
|
+ writel(0x00, UART1_REG(FCR));
|
|
+ writel(0x00, UART1_REG(MCR));
|
|
+
|
|
+ /* send the power-off command 'A' to PIC */
|
|
+ writel('A', UART1_REG(TX));
|
|
+}
|
|
+
|
|
+static void __init qnap_ts41x_init(void)
|
|
+{
|
|
+ /*
|
|
+ * Basic setup. Needs to be called early.
|
|
+ */
|
|
+ kirkwood_init();
|
|
+ kirkwood_mpp_conf(qnap_ts41x_mpp_config);
|
|
+
|
|
+ kirkwood_uart0_init();
|
|
+ kirkwood_uart1_init(); /* A PIC controller is connected here. */
|
|
+ spi_register_board_info(qnap_ts41x_spi_slave_info,
|
|
+ ARRAY_SIZE(qnap_ts41x_spi_slave_info));
|
|
+ kirkwood_spi_init();
|
|
+ kirkwood_i2c_init();
|
|
+ i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1);
|
|
+ kirkwood_ge00_init(&qnap_ts41x_ge00_data);
|
|
+ kirkwood_ge01_init(&qnap_ts41x_ge01_data);
|
|
+ kirkwood_sata_init(&qnap_ts41x_sata_data);
|
|
+ kirkwood_ehci_init();
|
|
+ platform_device_register(&qnap_ts41x_button_device);
|
|
+
|
|
+ pm_power_off = qnap_ts41x_power_off;
|
|
+
|
|
+}
|
|
+
|
|
+static int __init ts41x_pci_init(void)
|
|
+{
|
|
+ if (machine_is_ts41x())
|
|
+ kirkwood_pcie_init();
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+subsys_initcall(ts41x_pci_init);
|
|
+
|
|
+MACHINE_START(TS41X, "QNAP TS-41x")
|
|
+ /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
|
|
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
|
|
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
|
|
+ .boot_params = 0x00000100,
|
|
+ .init_machine = qnap_ts41x_init,
|
|
+ .map_io = kirkwood_map_io,
|
|
+ .init_irq = kirkwood_init_irq,
|
|
+ .timer = &kirkwood_timer,
|
|
+MACHINE_END
|
|
--- a/arch/arm/tools/mach-types
|
|
+++ b/arch/arm/tools/mach-types
|
|
@@ -2421,3 +2421,4 @@
|
|
mh355 MACH_MH355 MH355 2435
|
|
pc7802 MACH_PC7802 PC7802 2436
|
|
gnet_sgc MACH_GNET_SGC GNET_SGC 2437
|
|
+ts41x MACH_TS41X TS41X 2502
|