debian-packaging
/
linux
8
0
Fork 0
Code Releases Activity
linux/debian/patches/features/arm/hp-t5325.patch

234 lines
5.6 KiB
Diff
Raw Blame History

Subject: [PATCH] Kirkwood: Add support for HP t5325 Thin Client
Add support for the HP t5325 Thin Client. This thin client is based
on a Marvell Kirkwood chip at 1.2 GHz and features 512 MB RAM, 512 MB
SATA-attached flash and an XGI Volari Z11 GPU.
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 29b2163..4278271 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -81,6 +81,12 @@
Say 'Y' here if you want your kernel to support the
Marvell OpenRD Ultimate Board.
+config MACH_T5325
+ bool "HP t5325 Thin Client"
+ help
+ Say 'Y' here if you want your kernel to support the
+ HP t5325 Thin Client.
+
endmenu
endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index c0cd5d3..b7c5d5e 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -10,5 +10,6 @@
obj-$(CONFIG_MACH_TS219) += ts219-setup.o
obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o
obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
+obj-$(CONFIG_MACH_T5325) += t5325-setup.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
--- /dev/null 2010-05-25 13:42:08.579681378 +0000
+++ b/arch/arm/mach-kirkwood/t5325-setup.c 2010-05-24 14:48:44.000000000 +0000
@@ -0,0 +1,194 @@
+/*
+ *
+ * HP t5325 Thin Client setup
+ *
+ * Copyright (C) 2010 Martin Michlmayr <tbm@cyrius.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+struct mtd_partition hp_t5325_partitions[] = {
+ {
+ .name = "u-boot env",
+ .size = SZ_64K,
+ .offset = SZ_512K + SZ_256K,
+ },
+ {
+ .name = "permanent u-boot env",
+ .size = SZ_64K,
+ .offset = MTDPART_OFS_APPEND,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "HP env",
+ .size = SZ_64K,
+ .offset = MTDPART_OFS_APPEND,
+ },
+ {
+ .name = "u-boot",
+ .size = SZ_512K,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "SSD firmware",
+ .size = SZ_256K,
+ .offset = SZ_512K,
+ },
+};
+
+const struct flash_platform_data hp_t5325_flash = {
+ .type = "mx25l8005",
+ .name = "spi_flash",
+ .parts = hp_t5325_partitions,
+ .nr_parts = ARRAY_SIZE(hp_t5325_partitions),
+};
+
+struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &hp_t5325_flash,
+ .irq = -1,
+ },
+};
+
+static struct mv643xx_eth_platform_data hp_t5325_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data hp_t5325_sata_data = {
+ .n_ports = 2,
+};
+
+static struct gpio_keys_button hp_t5325_buttons[] = {
+ {
+ .code = KEY_POWER,
+ .gpio = 45,
+ .desc = "Power",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data hp_t5325_button_data = {
+ .buttons = hp_t5325_buttons,
+ .nbuttons = ARRAY_SIZE(hp_t5325_buttons),
+};
+
+static struct platform_device hp_t5325_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &hp_t5325_button_data,
+ }
+};
+
+static unsigned int hp_t5325_mpp_config[] __initdata = {
+ MPP0_NF_IO2,
+ MPP1_SPI_MOSI,
+ MPP2_SPI_SCK,
+ MPP3_SPI_MISO,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP6_SYSRST_OUTn,
+ MPP7_SPI_SCn,
+ MPP8_TW_SDA,
+ MPP9_TW_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP12_SD_CLK,
+ MPP13_GPIO,
+ MPP14_GPIO,
+ MPP15_GPIO,
+ MPP16_GPIO,
+ MPP17_GPIO,
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP20_GPIO,
+ MPP21_GPIO,
+ MPP22_GPIO,
+ MPP23_GPIO,
+ MPP32_GPIO,
+ MPP33_GE1_13,
+ MPP39_AUDIO_I2SBCLK,
+ MPP40_AUDIO_I2SDO,
+ MPP41_AUDIO_I2SLRC,
+ MPP42_AUDIO_I2SMCLK,
+ MPP45_GPIO, /* Power button */
+ MPP48_GPIO, /* Board power off */
+ 0
+};
+
+#define HP_T5325_GPIO_POWER_OFF 48
+
+static void hp_t5325_power_off(void)
+{
+ gpio_set_value(HP_T5325_GPIO_POWER_OFF, 1);
+}
+
+static void __init hp_t5325_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(hp_t5325_mpp_config);
+
+ kirkwood_uart0_init();
+ spi_register_board_info(hp_t5325_spi_slave_info,
+ ARRAY_SIZE(hp_t5325_spi_slave_info));
+ kirkwood_spi_init();
+ kirkwood_i2c_init();
+ kirkwood_ge00_init(&hp_t5325_ge00_data);
+ kirkwood_sata_init(&hp_t5325_sata_data);
+ kirkwood_ehci_init();
+ platform_device_register(&hp_t5325_button_device);
+
+ if (gpio_request(HP_T5325_GPIO_POWER_OFF, "power-off") == 0 &&
+ gpio_direction_output(HP_T5325_GPIO_POWER_OFF, 0) == 0)
+ pm_power_off = hp_t5325_power_off;
+ else
+ pr_err("t5325: failed to configure power-off GPIO\n");
+}
+
+static int __init hp_t5325_pci_init(void)
+{
+ if (machine_is_t5325())
+ kirkwood_pcie_init();
+
+ return 0;
+}
+subsys_initcall(hp_t5325_pci_init);
+
+MACHINE_START(T5325, "HP t5325 Thin Client")
+ /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = hp_t5325_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
View Git Blame Copy Permalink