From 0d83b2f64c330ee3892cb3117ac5d56e97185ecf Mon Sep 17 00:00:00 2001 From: Matthew Slattery Date: Wed, 23 Dec 2009 13:48:04 +0000 Subject: [PATCH 5/8] sfc: QT2025C: Switch into self-configure mode when not in loopback The PHY boots in a mode which is not necessarily optimal. This change switches it to self-configure mode (except when in loopback, which won't work in that mode if an SFP+ module is not present) by rebooting the PHY's microcontroller, and replicating the sequence of configuration writes from the boot EEPROM with the appropriate changes. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/qt202x_phy.c | 119 ++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 119 insertions(+), 0 deletions(-) diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c index e4590fb..0cd6eed 100644 --- a/drivers/net/sfc/qt202x_phy.c +++ b/drivers/net/sfc/qt202x_phy.c @@ -33,6 +33,9 @@ #define PCS_FW_HEARTBEAT_REG 0xd7ee #define PCS_FW_HEARTB_LBN 0 #define PCS_FW_HEARTB_WIDTH 8 +#define PCS_FW_PRODUCT_CODE_1 0xd7f0 +#define PCS_FW_VERSION_1 0xd7f3 +#define PCS_FW_BUILD_1 0xd7f6 #define PCS_UC8051_STATUS_REG 0xd7fd #define PCS_UC_STATUS_LBN 0 #define PCS_UC_STATUS_WIDTH 8 @@ -54,6 +57,7 @@ struct qt202x_phy_data { enum efx_phy_mode phy_mode; bool bug17190_in_bad_state; unsigned long bug17190_timer; + u32 firmware_ver; }; #define QT2022C2_MAX_RESET_TIME 500 @@ -100,6 +104,25 @@ static int qt2025c_wait_reset(struct efx_nic *efx) return 0; } +static void qt2025c_firmware_id(struct efx_nic *efx) +{ + struct qt202x_phy_data *phy_data = efx->phy_data; + u8 firmware_id[9]; + size_t i; + + for (i = 0; i < sizeof(firmware_id); i++) + firmware_id[i] = efx_mdio_read(efx, MDIO_MMD_PCS, + PCS_FW_PRODUCT_CODE_1 + i); + EFX_INFO(efx, "QT2025C firmware %xr%d v%d.%d.%d.%d [20%02d-%02d-%02d]\n", + (firmware_id[0] << 8) | firmware_id[1], firmware_id[2], + firmware_id[3] >> 4, firmware_id[3] & 0xf, + firmware_id[4], firmware_id[5], + firmware_id[6], firmware_id[7], firmware_id[8]); + phy_data->firmware_ver = ((firmware_id[3] & 0xf0) << 20) | + ((firmware_id[3] & 0x0f) << 16) | + (firmware_id[4] << 8) | firmware_id[5]; +} + static void qt2025c_bug17190_workaround(struct efx_nic *efx) { struct qt202x_phy_data *phy_data = efx->phy_data; @@ -133,6 +156,95 @@ static void qt2025c_bug17190_workaround(struct efx_nic *efx) } } +static int qt2025c_select_phy_mode(struct efx_nic *efx) +{ + struct qt202x_phy_data *phy_data = efx->phy_data; + struct falcon_board *board = falcon_board(efx); + int reg, rc, i; + uint16_t phy_op_mode; + + /* Only 2.0.1.0+ PHY firmware supports the more optimal SFP+ + * Self-Configure mode. Don't attempt any switching if we encounter + * older firmware. */ + if (phy_data->firmware_ver < 0x02000100) + return 0; + + /* In general we will get optimal behaviour in "SFP+ Self-Configure" + * mode; however, that powers down most of the PHY when no module is + * present, so we must use a different mode (any fixed mode will do) + * to be sure that loopbacks will work. */ + phy_op_mode = (efx->loopback_mode == LOOPBACK_NONE) ? 0x0038 : 0x0020; + + /* Only change mode if really necessary */ + reg = efx_mdio_read(efx, 1, 0xc319); + if ((reg & 0x0038) == phy_op_mode) + return 0; + EFX_LOG(efx, "Switching PHY to mode 0x%04x\n", phy_op_mode); + + /* This sequence replicates the register writes configured in the boot + * EEPROM (including the differences between board revisions), except + * that the operating mode is changed, and the PHY is prevented from + * unnecessarily reloading the main firmware image again. */ + efx_mdio_write(efx, 1, 0xc300, 0x0000); + /* (Note: this portion of the boot EEPROM sequence, which bit-bashes 9 + * STOPs onto the firmware/module I2C bus to reset it, varies across + * board revisions, as the bus is connected to different GPIO/LED + * outputs on the PHY.) */ + if (board->major == 0 && board->minor < 2) { + efx_mdio_write(efx, 1, 0xc303, 0x4498); + for (i = 0; i < 9; i++) { + efx_mdio_write(efx, 1, 0xc303, 0x4488); + efx_mdio_write(efx, 1, 0xc303, 0x4480); + efx_mdio_write(efx, 1, 0xc303, 0x4490); + efx_mdio_write(efx, 1, 0xc303, 0x4498); + } + } else { + efx_mdio_write(efx, 1, 0xc303, 0x0920); + efx_mdio_write(efx, 1, 0xd008, 0x0004); + for (i = 0; i < 9; i++) { + efx_mdio_write(efx, 1, 0xc303, 0x0900); + efx_mdio_write(efx, 1, 0xd008, 0x0005); + efx_mdio_write(efx, 1, 0xc303, 0x0920); + efx_mdio_write(efx, 1, 0xd008, 0x0004); + } + efx_mdio_write(efx, 1, 0xc303, 0x4900); + } + efx_mdio_write(efx, 1, 0xc303, 0x4900); + efx_mdio_write(efx, 1, 0xc302, 0x0004); + efx_mdio_write(efx, 1, 0xc316, 0x0013); + efx_mdio_write(efx, 1, 0xc318, 0x0054); + efx_mdio_write(efx, 1, 0xc319, phy_op_mode); + efx_mdio_write(efx, 1, 0xc31a, 0x0098); + efx_mdio_write(efx, 3, 0x0026, 0x0e00); + efx_mdio_write(efx, 3, 0x0027, 0x0013); + efx_mdio_write(efx, 3, 0x0028, 0xa528); + efx_mdio_write(efx, 1, 0xd006, 0x000a); + efx_mdio_write(efx, 1, 0xd007, 0x0009); + efx_mdio_write(efx, 1, 0xd008, 0x0004); + /* This additional write is not present in the boot EEPROM. It + * prevents the PHY's internal boot ROM doing another pointless (and + * slow) reload of the firmware image (the microcontroller's code + * memory is not affected by the microcontroller reset). */ + efx_mdio_write(efx, 1, 0xc317, 0x00ff); + efx_mdio_write(efx, 1, 0xc300, 0x0002); + msleep(20); + + /* Restart microcontroller execution from RAM */ + efx_mdio_write(efx, 3, 0xe854, 0x00c0); + efx_mdio_write(efx, 3, 0xe854, 0x0040); + msleep(50); + + /* Wait for the microcontroller to be ready again */ + rc = qt2025c_wait_reset(efx); + if (rc < 0) { + EFX_ERR(efx, "PHY microcontroller reset during mode switch " + "timed out\n"); + return rc; + } + + return 0; +} + static int qt202x_reset_phy(struct efx_nic *efx) { int rc; @@ -206,6 +318,9 @@ static int qt202x_phy_init(struct efx_nic *efx) devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid), efx_mdio_id_rev(devid)); + if (efx->phy_type == PHY_TYPE_QT2025C) + qt2025c_firmware_id(efx); + return 0; } @@ -234,6 +349,10 @@ static int qt202x_phy_reconfigure(struct efx_nic *efx) struct qt202x_phy_data *phy_data = efx->phy_data; if (efx->phy_type == PHY_TYPE_QT2025C) { + int rc = qt2025c_select_phy_mode(efx); + if (rc) + return rc; + /* There are several different register bits which can * disable TX (and save power) on direct-attach cables * or optical transceivers, varying somewhat between -- 1.6.5.7