xpp: support loading Octasic EC firmware
Echo Cancellation firmware is loaded by xpp/stribank_hexload (Using the oct612x code). * astribank_hexload: options -O/-o/-A for handling the Octasic echo cancellation firmware. * astribank_tool: report that. * xpp_fxloader: Run astribank_hexload, if needed. * dahdi_perl: The EC module is an extra XPD, but not a "telephony device" and hence not a span. Deal with that. * waitfor_xpds: may need to wait a bit longer for firmware loading. Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@10032 17933a7a-c749-41c5-a318-cba88f637d49
This commit is contained in:
Tzafrir Cohen
parent
d3cadf5352
commit
ccd13cfd47
39
xpp/Makefile
39
xpp/Makefile
|
|
@ -37,8 +37,23 @@ PERL_MODS := $(shell cd perl_modules; echo $(PERL_MODS_PAT))
|
|||
# FIXME: Are those values really sane?
|
||||
HOSTCC ?= $(CC)
|
||||
|
||||
USE_OCTASIC := yes
|
||||
OCTASIC_DIR := oct612x
|
||||
|
||||
CFLAGS += -g -Wall $(USB_INCLUDE)
|
||||
ifneq (no,$(USE_OCTASIC))
|
||||
|
||||
OCT_OBJS = $(shell $(OCTASIC_DIR)/octasic-helper objects $(OCTASIC_DIR))
|
||||
OCT_SRCS = $(shell echo $(OCT_OBJS) | tr -s ' ' '\n' | sed 's/\.o$$/.c/g')
|
||||
OCT_HERE_OBJS = $(shell echo $(OCT_OBJS) | tr -s ' ' '\n' | sed 's,^.*/,,')
|
||||
OCT_CFLAGS = $(shell $(OCTASIC_DIR)/octasic-helper cflags $(OCTASIC_DIR))
|
||||
OCT_DEFINES = \
|
||||
-DPTR_TYPE=uint32_t \
|
||||
-DcOCT6100_INTERNAL_SUPER_ARRAY_SIZE=1024 \
|
||||
-DcOCT6100_MAX_ECHO_CHANNELS=672 \
|
||||
-DcOCT6100_MAX_MIXER_EVENTS=1344
|
||||
|
||||
ECHO_LOADER = echo_loader.o
|
||||
endif
|
||||
|
||||
%.8: %
|
||||
pod2man --section 8 $^ > $@ || $(RM) $@
|
||||
|
|
@ -57,7 +72,7 @@ PERL_MANS = $(PERL_SCRIPTS:%=%.8)
|
|||
XTALK_OBJS = xtalk/xtalk.o xtalk/xusb.o xtalk/xlist.o xtalk/debug.o
|
||||
ASTRIBANK_OBJS = astribank_usb.o mpptalk.o $(XTALK_OBJS)
|
||||
|
||||
ABHEXLOAD_OBJS = astribank_hexload.o hexfile.o pic_loader.o $(ASTRIBANK_OBJS) $(OCT_OBJS)
|
||||
ABHEXLOAD_OBJS = astribank_hexload.o hexfile.o pic_loader.o $(ECHO_LOADER) $(ASTRIBANK_OBJS) $(OCT_HERE_OBJS)
|
||||
ABTOOL_OBJS = astribank_tool.o $(ASTRIBANK_OBJS)
|
||||
ABALLOW_OBJS = astribank_allow.o $(ASTRIBANK_OBJS)
|
||||
|
||||
|
|
@ -112,6 +127,7 @@ fpga_load: LIBS+=$(EXTRA_LIBS) $(USB_LIB)
|
|||
|
||||
astribank_hexload: $(ABHEXLOAD_OBJS)
|
||||
astribank_hexload: LIBS+=$(EXTRA_LIBS) $(USB_LIB)
|
||||
astribank_hexload: CFLAGS+=$(OCT_CFLAGS)
|
||||
|
||||
astribank_tool: $(ABTOOL_OBJS)
|
||||
astribank_tool: LIBS+=$(EXTRA_LIBS) $(USB_LIB)
|
||||
|
|
@ -124,9 +140,26 @@ astribank_is_starting: LIBS+=$(EXTRA_LIBS)
|
|||
|
||||
fpga_load.o: CFLAGS+=-D_GNU_SOURCE # We use memrchr()
|
||||
|
||||
hex2iic: hex2iic.o iic.o hexfile.o
|
||||
|
||||
test_parse: test_parse.o hexfile.o
|
||||
test_parse: LIBS+=$(EXTRA_LIBS) $(USB_LIB)
|
||||
|
||||
ifneq (no,$(USE_OCTASIC))
|
||||
.octasic.depend: $(OCTASIC_DIR)/octasic-helper Makefile ../config.status
|
||||
$(CC) -MM $(OCT_CFLAGS) \
|
||||
`$(OCTASIC_DIR)/octasic-helper objects | \
|
||||
tr -s ' ' '\n' | \
|
||||
sed -e 's,.*,$(OCTASIC_DIR)/&,' -e 's/\.o$$/.c/'` > $@
|
||||
|
||||
-include .octasic.depend
|
||||
|
||||
$(OCT_HERE_OBJS): Makefile
|
||||
$(CC) -c $(CFLAGS) $(OCT_CFLAGS) $(OCT_DEFINES) $(OCT_SRCS)
|
||||
|
||||
endif
|
||||
|
||||
|
||||
%: %.o
|
||||
$(CC) $(LDFLAGS) $^ $(LIBS) -o $@
|
||||
|
||||
|
|
@ -135,7 +168,7 @@ test_parse: LIBS+=$(EXTRA_LIBS) $(USB_LIB)
|
|||
touch $@
|
||||
|
||||
clean:
|
||||
$(RM) .depend *.o xtalk/*.o $(TARGETS)
|
||||
$(RM) .depend .octasic.depend *.o xtalk/*.o $(OCT_HERE_OBJS) $(TARGETS)
|
||||
|
||||
.PHONY: depend
|
||||
depend: .depend
|
||||
|
|
|
|||
|
|
@ -955,6 +955,9 @@ following command in order to load the FPGA firmware manually:
|
|||
# pick the right name according to the device ID. FPGA_1161.hex is for
|
||||
# 116x Astribanks:
|
||||
astribank_hexload -D /dev/bus/usb/MMM/NNN -F /usr/share/dahdi/FPGA_1161.hex
|
||||
# If the device has an echo canceller unit (If the unit is BRI/E1, you
|
||||
# need to add an extra -A to the command-line after the -O)
|
||||
#astribank_hexload -D /dev/bus/usb/MMM/NNN -O /usr/share/dahdi/OCT6104E-256D.ima
|
||||
# Note the shell expantion in this line:
|
||||
astribank_hexload -D /dev/bus/usb/MMM/NNN -p /usr/share/dahdi/PIC_TYPE_[1-4].hex
|
||||
# reenumerate (disconnect and reconnect)
|
||||
|
|
@ -1072,6 +1075,9 @@ xpd_bri::
|
|||
BRI ("ISDN") modules. Module type 3.
|
||||
xpd_pri::
|
||||
The module for controlling E1/T1 modules. Module type 4.
|
||||
xpd_echo::
|
||||
The module for controlling hardware echo canceller modules. Module type 5.
|
||||
Does not generate a span.
|
||||
xpp_usb::
|
||||
The functionality needed to connect to the USB bus.
|
||||
|
||||
|
|
|
|||
|
|
@ -106,6 +106,7 @@ static int write_to_file(struct eeprom_table *eeprom_table, struct capabilities
|
|||
fprintf(f, "Capabilities.Port.FXO: %d\n", caps->ports_fxo);
|
||||
fprintf(f, "Capabilities.Port.BRI: %d\n", caps->ports_bri);
|
||||
fprintf(f, "Capabilities.Port.PRI: %d\n", caps->ports_pri);
|
||||
fprintf(f, "Capabilities.Port.ECHO: %d\n", caps->ports_echo);
|
||||
fprintf(f, "Capabilities.Twinstar: %d\n", CAP_EXTRA_TWINSTAR(caps));
|
||||
fprintf(f, "Data:\n");
|
||||
bin_to_file(eeprom_table, sizeof(*eeprom_table), f);
|
||||
|
|
|
|||
|
|
@ -1,11 +1,19 @@
|
|||
.TH "ASTRIBANK_HEXLOAD" "8" "29 March 2009" "" ""
|
||||
.TH "ASTRIBANK_HEXLOAD" "8" "30 May 2011" "" ""
|
||||
|
||||
.SH NAME
|
||||
astribank_tool \- Xorcom Astribank (xpp) firmware loader
|
||||
.SH SYNOPSIS
|
||||
.B astribank_tool \-D \fIdevice-path\fR <\fB\-F|\-p\fR> [\fIoptions\fR] \fIhexfile\fR
|
||||
.B astribank_tool \-D \fIdevice-path\fR \-F [\fIoptions\fR] \fIhexfile\fR
|
||||
|
||||
.B astribank_tool [\-h]
|
||||
.B astribank_tool \-D \fIdevice-path\fR \-p [\fIoptions\fR] \fIhexfile1 .. hexfile4\fR
|
||||
|
||||
.B astribank_tool \-D \fIdevice-path\fR \-O [-A] [\fIoptions\fR] \fIimagefile\fR
|
||||
|
||||
.B astribank_tool \-D \fIdevice-path\fR \-o [\fIoptions\fR]
|
||||
|
||||
.B astribank_tool \-D \fIdevice-path\fR \-E [\fIoptions\fR] \fIhexfile\fR
|
||||
|
||||
.B astribank_tool \-h
|
||||
|
||||
.SH DESCRIPTION
|
||||
.B astribank_hexload
|
||||
|
|
@ -28,6 +36,8 @@ which would be /dev/bus/usb/\fIbus_num\fR/\fIdevice_num\fR, or
|
|||
/proc/bus/usb/\fIbus_num\fR/\fIdevice_num\fR.
|
||||
.RE
|
||||
|
||||
One of the following is required:
|
||||
|
||||
.B \-F
|
||||
.RS
|
||||
The firmware to load is a FPGA firmware.
|
||||
|
|
@ -35,9 +45,29 @@ The firmware to load is a FPGA firmware.
|
|||
|
||||
.B \-p
|
||||
.RS
|
||||
The firmware to load is a PIC firmware.
|
||||
The firmwares to load is are PIC firmwares. All (typically 4) should be
|
||||
on the command-line.
|
||||
.RE
|
||||
|
||||
.B \-O
|
||||
.RS
|
||||
The firmware to load is an Octasic echo canceller firmware image file.
|
||||
.RE
|
||||
|
||||
.B \-o
|
||||
.RS
|
||||
Don't load firmware. Just print the version number of the currently-loaded
|
||||
Octasic echo canceller firmware.
|
||||
.RE
|
||||
|
||||
.B \-E
|
||||
.RS
|
||||
The firmware to load is a special EEPROM burning one.
|
||||
.RE
|
||||
|
||||
|
||||
Other options:
|
||||
|
||||
.B \-v
|
||||
.RS
|
||||
Increase verbosity. May be used multiple times.
|
||||
|
|
@ -53,6 +83,14 @@ Set debug mask to \fImask\fR. Default is 0, 0xFF is "everything".
|
|||
Displays usage message.
|
||||
.RE
|
||||
|
||||
.B \-A
|
||||
.RS
|
||||
When loading a Octasic echo canceller firmware, set the channels of the
|
||||
first Astribank module to use aLaw (G.711a). This is what you'd normally
|
||||
use for BRI and E1. If not set, the default mu-Law (G.711u), which is
|
||||
what you'd normally use for FXS, FXO and T1.
|
||||
.RE
|
||||
|
||||
.SH SEE ALSO
|
||||
fxload(8), lsusb(8), astribank_tool(8), fpga_load(8)
|
||||
|
||||
|
|
|
|||
|
|
@ -31,7 +31,9 @@
|
|||
#include "hexfile.h"
|
||||
#include "mpptalk.h"
|
||||
#include "pic_loader.h"
|
||||
#include "echo_loader.h"
|
||||
#include "astribank_usb.h"
|
||||
#include "../autoconfig.h"
|
||||
|
||||
#define DBG_MASK 0x80
|
||||
#define MAX_HEX_LINES 10000
|
||||
|
|
@ -43,9 +45,14 @@ static void usage()
|
|||
fprintf(stderr, "Usage: %s [options...] -D {/proc/bus/usb|/dev/bus/usb}/<bus>/<dev> hexfile...\n", progname);
|
||||
fprintf(stderr, "\tOptions: {-F|-p}\n");
|
||||
fprintf(stderr, "\t\t[-E] # Burn to EEPROM\n");
|
||||
#if HAVE_OCTASIC
|
||||
fprintf(stderr, "\t\t[-O] # Load Octasic firmware\n");
|
||||
fprintf(stderr, "\t\t[-o] # Show Octasic version\n");
|
||||
#endif
|
||||
fprintf(stderr, "\t\t[-F] # Load FPGA firmware\n");
|
||||
fprintf(stderr, "\t\t[-p] # Load PIC firmware\n");
|
||||
fprintf(stderr, "\t\t[-v] # Increase verbosity\n");
|
||||
fprintf(stderr, "\t\t[-A] # Set A-Law for 1st module\n");
|
||||
fprintf(stderr, "\t\t[-d mask] # Debug mask (0xFF for everything)\n");
|
||||
exit(1);
|
||||
}
|
||||
|
|
@ -146,9 +153,15 @@ int main(int argc, char *argv[])
|
|||
{
|
||||
char *devpath = NULL;
|
||||
int opt_pic = 0;
|
||||
int opt_echo = 0;
|
||||
int opt_ecver = 0;
|
||||
#if HAVE_OCTASIC
|
||||
int opt_alaw = 0;
|
||||
#endif
|
||||
int opt_dest = 0;
|
||||
int opt_sum = 0;
|
||||
enum dev_dest dest = DEST_NONE;
|
||||
const char options[] = "vd:D:EFp";
|
||||
const char options[] = "vd:D:EFOopA";
|
||||
int iface_num;
|
||||
int ret;
|
||||
|
||||
|
|
@ -169,7 +182,7 @@ int main(int argc, char *argv[])
|
|||
ERR("The -F and -E options are mutually exclusive.\n");
|
||||
usage();
|
||||
}
|
||||
opt_dest = 1;
|
||||
opt_dest++;
|
||||
dest = DEST_EEPROM;
|
||||
break;
|
||||
case 'F':
|
||||
|
|
@ -177,9 +190,20 @@ int main(int argc, char *argv[])
|
|||
ERR("The -F and -E options are mutually exclusive.\n");
|
||||
usage();
|
||||
}
|
||||
opt_dest = 1;
|
||||
opt_dest++;
|
||||
dest = DEST_FPGA;
|
||||
break;
|
||||
#if HAVE_OCTASIC
|
||||
case 'O':
|
||||
opt_echo = 1;
|
||||
break;
|
||||
case 'o':
|
||||
opt_ecver = 1;
|
||||
break;
|
||||
case 'A':
|
||||
opt_alaw = 1;
|
||||
break;
|
||||
#endif
|
||||
case 'p':
|
||||
opt_pic = 1;
|
||||
break;
|
||||
|
|
@ -195,12 +219,17 @@ int main(int argc, char *argv[])
|
|||
usage();
|
||||
}
|
||||
}
|
||||
if((opt_dest ^ opt_pic) == 0) {
|
||||
ERR("The -F, -E and -p options are mutually exclusive.\n");
|
||||
opt_sum = opt_dest + opt_pic + opt_echo;
|
||||
if(opt_sum > 1 || (opt_sum == 0 && opt_ecver == 0)) {
|
||||
ERR("The -F, -E"
|
||||
#if HAVE_OCTASIC
|
||||
", -O"
|
||||
#endif
|
||||
" and -p options are mutually exclusive, if neither is used then -o should present\n");
|
||||
usage();
|
||||
}
|
||||
iface_num = (opt_dest) ? 1 : 0;
|
||||
if(!opt_pic) {
|
||||
if(!opt_pic && !opt_ecver) {
|
||||
if(optind != argc - 1) {
|
||||
ERR("Got %d hexfile names (Need exactly one hexfile)\n",
|
||||
argc - 1 - optind);
|
||||
|
|
@ -227,7 +256,7 @@ int main(int argc, char *argv[])
|
|||
return 1;
|
||||
}
|
||||
astribank_close(astribank, 0);
|
||||
} else if(opt_pic) {
|
||||
} else if(opt_pic || opt_echo || opt_ecver) {
|
||||
/*
|
||||
* XPP Interface
|
||||
*/
|
||||
|
|
@ -237,11 +266,28 @@ int main(int argc, char *argv[])
|
|||
ERR("%s: Opening astribank failed\n", devpath);
|
||||
return 1;
|
||||
}
|
||||
//show_astribank_info(astribank);
|
||||
#if HAVE_OCTASIC
|
||||
if (opt_ecver) {
|
||||
if((ret = echo_ver(astribank)) < 0) {
|
||||
ERR("%s: Get Octasic version failed (Is Echo canceller card connected?)\n", devpath);
|
||||
return 1;
|
||||
} else
|
||||
INFO("Octasic version: 0x%0X\n", ret);
|
||||
}
|
||||
#endif
|
||||
if (opt_pic) {
|
||||
if ((ret = load_pic(astribank, argc - optind, argv + optind)) < 0) {
|
||||
ERR("%s: Loading PIC's failed\n", devpath);
|
||||
return 1;
|
||||
}
|
||||
#if HAVE_OCTASIC
|
||||
} else if (opt_echo) {
|
||||
if((ret = load_echo(astribank, argv[optind], opt_alaw)) < 0) {
|
||||
ERR("%s: Loading ECHO's failed\n", devpath);
|
||||
return 1;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
astribank_close(astribank, 0);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -95,7 +95,7 @@ static int show_hardware(struct astribank_device *astribank)
|
|||
if(astribank->eeprom_type == EEPROM_TYPE_LARGE) {
|
||||
show_capabilities(&capabilities, stdout);
|
||||
if(STATUS_FPGA_LOADED(astribank->status)) {
|
||||
for(unit = 0; unit < 4; unit++) {
|
||||
for(unit = 0; unit < 5; unit++) {
|
||||
ret = mpps_card_info(astribank, unit, &card_type, &card_status);
|
||||
if(ret < 0)
|
||||
return ret;
|
||||
|
|
|
|||
|
|
@ -15,6 +15,7 @@ use Dahdi;
|
|||
use Dahdi::Span;
|
||||
use Dahdi::Xpp;
|
||||
use Dahdi::Xpp::Xbus;
|
||||
use Dahdi::Xpp::Xpd;
|
||||
use Getopt::Std;
|
||||
|
||||
sub usage {
|
||||
|
|
@ -64,7 +65,7 @@ foreach my $xbus (Dahdi::Xpp::xbuses($sorter)) {
|
|||
myprintf "%-10s\t%3s-%s\t%s\n",
|
||||
$xbus->name, $xbus->xpporder, $xbus->label, $xbus->connector;
|
||||
next unless $xbus->status eq 'CONNECTED';
|
||||
foreach my $xpd ($xbus->xpds()) {
|
||||
foreach my $xpd (Dahdi::Xpp::Xpd::telephony_devs($xbus->xpds())) {
|
||||
my $prev = $xpd->dahdi_registration($on);
|
||||
if(!defined($prev)) { # Failure
|
||||
printf "%s: Failed %s\n", $xpd->fqn, $!;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,784 @@
|
|||
/*
|
||||
* Written by Oron Peled <oron@actcom.co.il>
|
||||
* Copyright (C) 2008, Xorcom
|
||||
*
|
||||
* All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <stdio.h>
|
||||
#include <assert.h>
|
||||
#include <string.h>
|
||||
#include <stdlib.h>
|
||||
#include <errno.h>
|
||||
#include <regex.h>
|
||||
#include <sys/time.h>
|
||||
#include "echo_loader.h"
|
||||
#include "debug.h"
|
||||
#include <oct6100api/oct6100_api.h>
|
||||
|
||||
#define DBG_MASK 0x03
|
||||
#define TIMEOUT 1000
|
||||
#define ECHO_MAX_CHANS 128
|
||||
#define ECHO_RIN_STREAM 0
|
||||
#define ECHO_ROUT_STREAM 1
|
||||
#define ECHO_SIN_STREAM 2
|
||||
#define ECHO_SOUT_STREAM 3
|
||||
|
||||
#define ECHO_RIN_STREAM2 4
|
||||
#define ECHO_SIN_STREAM2 6
|
||||
#define ECHO_ROUT_STREAM2 5
|
||||
#define ECHO_SOUT_STREAM2 7
|
||||
|
||||
#define EC_VER_TEST 0xABCD
|
||||
#define EC_VER_INVALID 0xFFFF
|
||||
static float oct_fw_load_timeout = 2.0;
|
||||
|
||||
struct echo_mod {
|
||||
tPOCT6100_INSTANCE_API pApiInstance;
|
||||
UINT32 ulEchoChanHndl[256];
|
||||
struct astribank_device *astribank;
|
||||
int maxchans;
|
||||
};
|
||||
|
||||
enum xpp_packet_types {
|
||||
SPI_SND_XOP = 0x0F,
|
||||
SPI_RCV_XOP = 0x10,
|
||||
TST_SND_XOP = 0x35,
|
||||
TST_RCV_XOP = 0x36,
|
||||
};
|
||||
|
||||
struct xpp_packet_header {
|
||||
struct {
|
||||
uint16_t len;
|
||||
uint8_t op;
|
||||
uint8_t unit;
|
||||
} PACKED header;
|
||||
union {
|
||||
struct {
|
||||
uint8_t header;
|
||||
uint8_t flags;
|
||||
uint8_t addr_l;
|
||||
uint8_t addr_h;
|
||||
uint8_t data_l;
|
||||
uint8_t data_h;
|
||||
} PACKED spi_pack;
|
||||
struct {
|
||||
uint8_t tid;
|
||||
uint8_t tsid;
|
||||
} PACKED tst_pack;
|
||||
} alt;
|
||||
} PACKED;
|
||||
|
||||
static struct usb_buffer {
|
||||
char data[PACKET_SIZE];
|
||||
int max_len;
|
||||
int curr;
|
||||
/* statistics */
|
||||
int min_send;
|
||||
int max_send;
|
||||
int num_sends;
|
||||
long total_bytes;
|
||||
struct timeval start;
|
||||
struct timeval end;
|
||||
} usb_buffer;
|
||||
|
||||
|
||||
static void usb_buffer_init(struct astribank_device *astribank, struct usb_buffer *ub)
|
||||
{
|
||||
ub->max_len = xusb_packet_size(astribank->xusb);
|
||||
ub->curr = 0;
|
||||
ub->min_send = INT_MAX;
|
||||
ub->max_send = 0;
|
||||
ub->num_sends = 0;
|
||||
ub->total_bytes = 0;
|
||||
gettimeofday(&ub->start, NULL);
|
||||
}
|
||||
|
||||
static long usb_buffer_usec(struct usb_buffer *ub)
|
||||
{
|
||||
struct timeval now;
|
||||
|
||||
gettimeofday(&now, NULL);
|
||||
return (now.tv_sec - ub->start.tv_sec) * 1000000 +
|
||||
(now.tv_usec - ub->start.tv_usec);
|
||||
}
|
||||
|
||||
static void usb_buffer_showstatistics(struct astribank_device *astribank, struct usb_buffer *ub)
|
||||
{
|
||||
long usec;
|
||||
|
||||
usec = usb_buffer_usec(ub);
|
||||
INFO("%s [%s]: Octasic statistics: packet_size=[%d, %ld, %d] packets=%d, bytes=%ld msec=%ld usec/packet=%d\n",
|
||||
xusb_devpath(astribank->xusb),
|
||||
xusb_serial(astribank->xusb),
|
||||
ub->min_send,
|
||||
ub->total_bytes / ub->num_sends,
|
||||
ub->max_send,
|
||||
ub->num_sends, ub->total_bytes,
|
||||
usec / 1000, usec / ub->num_sends);
|
||||
}
|
||||
|
||||
static int usb_buffer_flush(struct astribank_device *astribank, struct usb_buffer *ub)
|
||||
{
|
||||
int ret;
|
||||
long t;
|
||||
long sec;
|
||||
static int last_sec;
|
||||
|
||||
if (ub->curr == 0)
|
||||
return 0;
|
||||
ret = xusb_send(astribank->xusb, ub->data, ub->curr, TIMEOUT);
|
||||
if(ret < 0) {
|
||||
ERR("xusb_send failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
DBG("%s: Written %d bytes\n", __func__, ret);
|
||||
if (ret > ub->max_send)
|
||||
ub->max_send = ret;
|
||||
if (ret < ub->min_send)
|
||||
ub->min_send = ret;
|
||||
ub->total_bytes += ret;
|
||||
ub->num_sends++;
|
||||
ub->curr = 0;
|
||||
|
||||
sec = usb_buffer_usec(ub) / (1000 * 1000);
|
||||
if (sec > last_sec) {
|
||||
DBG("bytes/sec=%ld average len=%ld\n",
|
||||
ub->total_bytes / sec,
|
||||
ub->total_bytes / ub->num_sends);
|
||||
last_sec = sec;
|
||||
}
|
||||
|
||||
/*
|
||||
* Best result with high frequency firmware: 21 seconds
|
||||
* Octasic statistics: packet_size=[10, 239, 510] packets=26806, bytes=6419640 usec=21127883 usec/packet=788
|
||||
* t = 0.3 * ret - 150;
|
||||
*/
|
||||
t = oct_fw_load_timeout * ret - 150;
|
||||
if (t > 0)
|
||||
usleep(t);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int usb_buffer_append(struct astribank_device *astribank, struct usb_buffer *ub,
|
||||
char *buf, int len)
|
||||
{
|
||||
if (ub->curr + len >= ub->max_len) {
|
||||
ERR("%s: buffer too small ub->curr=%d, len=%d, ub->max_len=%d\n",
|
||||
__func__, ub->curr, len, ub->max_len);
|
||||
return -ENOMEM;
|
||||
}
|
||||
memcpy(ub->data + ub->curr, buf, len);
|
||||
ub->curr += len;
|
||||
return len;
|
||||
}
|
||||
|
||||
static int usb_buffer_send(struct astribank_device *astribank, struct usb_buffer *ub,
|
||||
char *buf, int len, int timeout, int recv_answer)
|
||||
{
|
||||
int ret = 0;
|
||||
|
||||
if (ub->curr + len >= ub->max_len) {
|
||||
ret = usb_buffer_flush(astribank, ub);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
}
|
||||
|
||||
if ((ret = usb_buffer_append(astribank, ub, buf, len)) < 0) {
|
||||
return ret;
|
||||
}
|
||||
DBG("%s: %d bytes %s\n", __func__, len, (recv_answer) ? "recv" : "send");
|
||||
if (recv_answer) {
|
||||
struct xpp_packet_header *phead;
|
||||
|
||||
ret = usb_buffer_flush(astribank, ub);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
ret = xusb_recv(astribank->xusb, buf, PACKET_SIZE, TIMEOUT);
|
||||
if(ret <= 0) {
|
||||
ERR("No USB packs to read: %s\n", strerror(-ret));
|
||||
return -EINVAL;
|
||||
}
|
||||
DBG("%s: %d bytes recv\n", __func__, ret);
|
||||
phead = (struct xpp_packet_header *)buf;
|
||||
if(phead->header.op != SPI_RCV_XOP && phead->header.op != TST_RCV_XOP) {
|
||||
ERR("Got unexpected reply OP=0x%02X\n", phead->header.op);
|
||||
dump_packet(LOG_ERR, DBG_MASK, "hexline[ERR]", buf, ret);
|
||||
return -EINVAL;
|
||||
}
|
||||
dump_packet(LOG_DEBUG, DBG_MASK, "dump:echoline[R]", (char *)phead, phead->header.len);
|
||||
switch(phead->header.op) {
|
||||
case SPI_RCV_XOP:
|
||||
ret = (phead->alt.spi_pack.data_h << 8) | phead->alt.spi_pack.data_l;
|
||||
break;
|
||||
case TST_RCV_XOP:
|
||||
ret = (phead->alt.tst_pack.tid << 8) | phead->alt.tst_pack.tsid;
|
||||
break;
|
||||
default:
|
||||
ret = -EINVAL;
|
||||
}
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
|
||||
int spi_send(struct astribank_device *astribank, uint16_t addr, uint16_t data, int recv_answer, int ver)
|
||||
{
|
||||
int ret;
|
||||
char buf[PACKET_SIZE];
|
||||
struct xpp_packet_header *phead = (struct xpp_packet_header *)buf;
|
||||
int pack_len;
|
||||
|
||||
assert(astribank != NULL);
|
||||
pack_len = sizeof(phead->header) + sizeof(phead->alt.spi_pack);
|
||||
phead->header.len = pack_len;
|
||||
phead->header.op = SPI_SND_XOP;
|
||||
phead->header.unit = 0x40; /* EC has always this unit num */
|
||||
phead->alt.spi_pack.header = 0x05;
|
||||
phead->alt.spi_pack.flags = 0x30 | (recv_answer ? 0x40: 0x00) | (ver ? 0x01: 0x00);
|
||||
phead->alt.spi_pack.addr_l = (addr >> 0) & 0xFF;
|
||||
phead->alt.spi_pack.addr_h = (addr >> 8) & 0xFF;
|
||||
phead->alt.spi_pack.data_l = (data >> 0) & 0xFF;
|
||||
phead->alt.spi_pack.data_h = (data >> 8) & 0xFF;
|
||||
|
||||
dump_packet(LOG_DEBUG, DBG_MASK, "dump:echoline[W]", (char *)phead, pack_len);
|
||||
|
||||
|
||||
ret = usb_buffer_send(astribank, &usb_buffer, buf, pack_len, TIMEOUT, recv_answer);
|
||||
if(ret < 0) {
|
||||
ERR("usb_buffer_send failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
DBG("%s: Written %d bytes\n", __func__, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
int test_send(struct astribank_device *astribank)
|
||||
{
|
||||
int ret;
|
||||
char buf[PACKET_SIZE];
|
||||
struct xpp_packet_header *phead = (struct xpp_packet_header *)buf;
|
||||
int pack_len;
|
||||
|
||||
assert(astribank != NULL);
|
||||
pack_len = sizeof(phead->header) + sizeof(phead->alt.tst_pack);
|
||||
phead->header.len = 6;
|
||||
phead->header.op = 0x35;
|
||||
phead->header.unit = 0x00;
|
||||
phead->alt.tst_pack.tid = 0x28; // EC TestId
|
||||
phead->alt.tst_pack.tsid = 0x00; // EC SubId
|
||||
|
||||
dump_packet(LOG_DEBUG, DBG_MASK, "dump:echoline[W]", (char *)phead, pack_len);
|
||||
|
||||
|
||||
ret = usb_buffer_send(astribank, &usb_buffer, buf, pack_len, TIMEOUT, 1);
|
||||
if(ret < 0) {
|
||||
ERR("usb_buffer_send failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
DBG("%s: Written %d bytes\n", __func__, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
void echo_send_data(struct astribank_device *astribank, const unsigned int addr, const unsigned int data)
|
||||
{
|
||||
/* DBG("SEND: %04X -> [%04X]\n", data, addr);
|
||||
DBG("\t\t[%04X] <- %04X\n", 0x0008, (addr >> 20));
|
||||
DBG("\t\t[%04X] <- %04X\n", 0x000A, (addr >> 4) & ((1 << 16) - 1));
|
||||
DBG("\t\t[%04X] <- %04X\n", 0x0004, data);
|
||||
DBG("\t\t[%04X] <- %04X\n", 0x0000, (((addr >> 1) & 0x7) << 9) | (1 << 8) | (3 << 12) | 1);
|
||||
*/
|
||||
|
||||
DBG("SND:\n");
|
||||
spi_send(astribank, 0x0008, (addr >> 20) , 0, 0);
|
||||
spi_send(astribank, 0x000A, (addr >> 4) & ((1 << 16) - 1) , 0, 0);
|
||||
spi_send(astribank, 0x0004, data , 0, 0);
|
||||
spi_send(astribank, 0x0000, (((addr >> 1) & 0x7) << 9) |
|
||||
(1 << 8) | (3 << 12) | 1 , 0, 0);
|
||||
}
|
||||
|
||||
unsigned int echo_recv_data(struct astribank_device *astribank, const unsigned int addr)
|
||||
{
|
||||
unsigned int data = 0x00;
|
||||
unsigned int ret;
|
||||
|
||||
DBG("RCV:\n");
|
||||
spi_send(astribank, 0x0008, (addr >> 20) , 0, 0);
|
||||
spi_send(astribank, 0x000A, (addr >> 4) & ((1 << 16) - 1) , 0, 0);
|
||||
spi_send(astribank, 0x0000, (((addr >> 1) & 0x7) << 9) |
|
||||
(1 << 8) | 1 , 0, 0);
|
||||
ret = spi_send(astribank, 0x0004, data , 1, 0);
|
||||
return ret;
|
||||
}
|
||||
|
||||
int load_file(char *filename, unsigned char **ppBuf, UINT32 *pLen)
|
||||
{
|
||||
unsigned char * pbyFileData = NULL;
|
||||
FILE* pFile;
|
||||
|
||||
DBG("Loading %s file...\n", filename);
|
||||
pFile = fopen( filename, "rb" );
|
||||
if (pFile == NULL) {
|
||||
ERR("fopen\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
fseek( pFile, 0L, SEEK_END );
|
||||
*pLen = ftell( pFile );
|
||||
fseek( pFile, 0L, SEEK_SET );
|
||||
|
||||
pbyFileData = (unsigned char *)malloc(*pLen);
|
||||
if (pbyFileData == NULL) {
|
||||
fclose( pFile );
|
||||
ERR("malloc\n" );
|
||||
return -ENODEV;
|
||||
} else {
|
||||
DBG("allocated mem for pbyFileData\n");
|
||||
}
|
||||
fread(pbyFileData, 1, *pLen, pFile);
|
||||
fclose(pFile);
|
||||
DBG("Successful loading %s file into memory (size = %d, DUMP: first = %02X %02X, last = %02X %02X)\n",
|
||||
filename, *pLen,
|
||||
pbyFileData[0], pbyFileData[1],
|
||||
pbyFileData[(*pLen)-2], pbyFileData[(*pLen)-1]);
|
||||
*ppBuf = pbyFileData;
|
||||
return 0;
|
||||
}
|
||||
|
||||
UINT32 Oct6100UserGetTime(tPOCT6100_GET_TIME f_pTime)
|
||||
{
|
||||
///* Why couldn't they just take a timeval like everyone else? */
|
||||
struct timeval tv;
|
||||
unsigned long long total_usecs;
|
||||
unsigned int mask = ~0;
|
||||
|
||||
gettimeofday(&tv, 0);
|
||||
total_usecs = (((unsigned long long)(tv.tv_sec)) * 1000000) +
|
||||
(((unsigned long long)(tv.tv_usec)));
|
||||
f_pTime->aulWallTimeUs[0] = (total_usecs & mask);
|
||||
f_pTime->aulWallTimeUs[1] = (total_usecs >> 32);
|
||||
//printf("Inside of Oct6100UserGetTime\n");
|
||||
return cOCT6100_ERR_OK;
|
||||
}
|
||||
|
||||
UINT32 Oct6100UserMemSet(PVOID f_pAddress, UINT32 f_ulPattern, UINT32 f_ulLength)
|
||||
{
|
||||
memset(f_pAddress, f_ulPattern, f_ulLength);
|
||||
return cOCT6100_ERR_OK;
|
||||
}
|
||||
|
||||
UINT32 Oct6100UserMemCopy(PVOID f_pDestination, const void *f_pSource, UINT32 f_ulLength)
|
||||
{
|
||||
memcpy(f_pDestination, f_pSource, f_ulLength);
|
||||
return cOCT6100_ERR_OK;
|
||||
}
|
||||
|
||||
UINT32 Oct6100UserCreateSerializeObject(tPOCT6100_CREATE_SERIALIZE_OBJECT f_pCreate)
|
||||
{
|
||||
return cOCT6100_ERR_OK;
|
||||
}
|
||||
|
||||
UINT32 Oct6100UserDestroySerializeObject(tPOCT6100_DESTROY_SERIALIZE_OBJECT f_pDestroy)
|
||||
{
|
||||
#ifdef OCTASIC_DEBUG
|
||||
ERR("I should never be called! (destroy serialize object)\n");
|
||||
#endif
|
||||
return cOCT6100_ERR_OK;
|
||||
}
|
||||
|
||||
UINT32 Oct6100UserSeizeSerializeObject(tPOCT6100_SEIZE_SERIALIZE_OBJECT f_pSeize)
|
||||
{
|
||||
/* Not needed */
|
||||
return cOCT6100_ERR_OK;
|
||||
}
|
||||
|
||||
UINT32 Oct6100UserReleaseSerializeObject(tPOCT6100_RELEASE_SERIALIZE_OBJECT f_pRelease)
|
||||
{
|
||||
/* Not needed */
|
||||
return cOCT6100_ERR_OK;
|
||||
}
|
||||
|
||||
UINT32 Oct6100UserDriverWriteApi(tPOCT6100_WRITE_PARAMS f_pWriteParams)
|
||||
{
|
||||
const unsigned int addr = f_pWriteParams->ulWriteAddress;
|
||||
const unsigned int data = f_pWriteParams->usWriteData;
|
||||
const struct echo_mod *echo_mod = (struct echo_mod *)(f_pWriteParams->pProcessContext);
|
||||
struct astribank_device *astribank = echo_mod->astribank;
|
||||
|
||||
echo_send_data(astribank, addr, data);
|
||||
|
||||
return cOCT6100_ERR_OK;
|
||||
}
|
||||
|
||||
UINT32 Oct6100UserDriverWriteSmearApi(tPOCT6100_WRITE_SMEAR_PARAMS f_pSmearParams)
|
||||
{
|
||||
unsigned int addr;
|
||||
unsigned int data;
|
||||
unsigned int len = f_pSmearParams->ulWriteLength;
|
||||
const struct echo_mod *echo_mod = (struct echo_mod *)f_pSmearParams->pProcessContext;
|
||||
struct astribank_device *astribank = echo_mod->astribank;
|
||||
unsigned int i;
|
||||
|
||||
for (i = 0; i < len; i++) {
|
||||
addr = f_pSmearParams->ulWriteAddress + (i << 1);
|
||||
data = f_pSmearParams->usWriteData;
|
||||
echo_send_data(astribank, addr, data);
|
||||
}
|
||||
return cOCT6100_ERR_OK;
|
||||
}
|
||||
|
||||
UINT32 Oct6100UserDriverWriteBurstApi(tPOCT6100_WRITE_BURST_PARAMS f_pBurstParams)
|
||||
{
|
||||
unsigned int addr;
|
||||
unsigned int data;
|
||||
unsigned int len = f_pBurstParams->ulWriteLength;
|
||||
const struct echo_mod *echo_mod = (struct echo_mod *)f_pBurstParams->pProcessContext;
|
||||
struct astribank_device *astribank = echo_mod->astribank;
|
||||
unsigned int i;
|
||||
|
||||
for (i = 0; i < len; i++) {
|
||||
addr = f_pBurstParams->ulWriteAddress + (i << 1);
|
||||
data = f_pBurstParams->pusWriteData[i];
|
||||
echo_send_data(astribank, addr, data);
|
||||
}
|
||||
return cOCT6100_ERR_OK;
|
||||
}
|
||||
|
||||
UINT32 Oct6100UserDriverReadApi(tPOCT6100_READ_PARAMS f_pReadParams)
|
||||
{
|
||||
const unsigned int addr = f_pReadParams->ulReadAddress;
|
||||
const struct echo_mod *echo_mod = (struct echo_mod *)f_pReadParams->pProcessContext;
|
||||
struct astribank_device *astribank = echo_mod->astribank;
|
||||
|
||||
*f_pReadParams->pusReadData = echo_recv_data(astribank, addr);
|
||||
return cOCT6100_ERR_OK;
|
||||
}
|
||||
|
||||
UINT32 Oct6100UserDriverReadBurstApi(tPOCT6100_READ_BURST_PARAMS f_pBurstParams)
|
||||
{
|
||||
unsigned int addr;
|
||||
unsigned int len = f_pBurstParams->ulReadLength;
|
||||
const struct echo_mod *echo_mod = (struct echo_mod *)f_pBurstParams->pProcessContext;
|
||||
struct astribank_device *astribank = echo_mod->astribank;
|
||||
unsigned int i;
|
||||
|
||||
for (i = 0;i < len; i++) {
|
||||
addr = f_pBurstParams->ulReadAddress + (i << 1);
|
||||
f_pBurstParams->pusReadData[i] = echo_recv_data(astribank, addr);
|
||||
}
|
||||
return cOCT6100_ERR_OK;
|
||||
}
|
||||
|
||||
inline int get_ver(struct astribank_device *astribank)
|
||||
{
|
||||
|
||||
return spi_send(astribank, 0, 0, 1, 1);
|
||||
}
|
||||
|
||||
//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||||
UINT32 init_octasic(char *filename, struct astribank_device *astribank, int is_alaw)
|
||||
{
|
||||
int cpld_ver;
|
||||
struct echo_mod *echo_mod;
|
||||
UINT32 nChan;
|
||||
UINT32 nSlot;
|
||||
UINT32 pcmLaw;
|
||||
UINT32 ulResult;
|
||||
|
||||
tOCT6100_GET_INSTANCE_SIZE InstanceSize;
|
||||
tPOCT6100_INSTANCE_API pApiInstance;
|
||||
tOCT6100_CHIP_OPEN OpenChip;
|
||||
|
||||
UINT32 ulImageByteSize;
|
||||
PUINT8 pbyImageData = NULL;
|
||||
|
||||
/*=========================================================================*/
|
||||
/* Channel resources.*/
|
||||
tOCT6100_CHANNEL_OPEN ChannelOpen;
|
||||
UINT32 ulChanHndl;
|
||||
|
||||
test_send(astribank);
|
||||
cpld_ver = get_ver(astribank);
|
||||
INFO("%s [%s]: Check EC_CPLD version: %d\n",
|
||||
xusb_devpath(astribank->xusb),
|
||||
xusb_serial(astribank->xusb),
|
||||
cpld_ver);
|
||||
if (cpld_ver < 0)
|
||||
return cpld_ver;
|
||||
else if (cpld_ver == EC_VER_TEST) {
|
||||
INFO("+---------------------------------------------------------+\n");
|
||||
INFO("| WARNING: TEST HARDWARE IS ON THE BOARD INSTEAD OF EC!!! |\n");
|
||||
INFO("+---------------------------------------------------------+\n");
|
||||
return cOCT6100_ERR_OK;
|
||||
}
|
||||
|
||||
|
||||
/**************************************************************************/
|
||||
/**************************************************************************/
|
||||
/* 1) Configure and Open the OCT6100. */
|
||||
/**************************************************************************/
|
||||
/**************************************************************************/
|
||||
|
||||
memset(&InstanceSize, 0, sizeof(tOCT6100_GET_INSTANCE_SIZE));
|
||||
memset(&OpenChip, 0, sizeof(tOCT6100_CHIP_OPEN));
|
||||
|
||||
if (!(echo_mod = malloc(sizeof(struct echo_mod)))) {
|
||||
ERR("cannot allocate memory for echo_mod\n");
|
||||
return 1;
|
||||
}
|
||||
DBG("allocated mem for echo_mod\n");
|
||||
|
||||
memset(echo_mod, 0, sizeof(struct echo_mod));
|
||||
|
||||
/* Fill the OCT6100 Chip Open configuration structure with default values */
|
||||
|
||||
ulResult = Oct6100ChipOpenDef( &OpenChip );
|
||||
if (ulResult != cOCT6100_ERR_OK) {
|
||||
ERR("Oct6100ChipOpenDef failed: result=%X\n", ulResult);
|
||||
return ulResult;
|
||||
}
|
||||
|
||||
OpenChip.pProcessContext = echo_mod;
|
||||
/* Configure clocks */
|
||||
|
||||
/* upclk oscillator is at 33.33 Mhz */
|
||||
OpenChip.ulUpclkFreq = cOCT6100_UPCLK_FREQ_33_33_MHZ;
|
||||
|
||||
/* mclk will be generated by internal PLL at 133 Mhz */
|
||||
OpenChip.fEnableMemClkOut = TRUE;
|
||||
OpenChip.ulMemClkFreq = cOCT6100_MCLK_FREQ_133_MHZ;
|
||||
|
||||
/* General parameters */
|
||||
OpenChip.fEnableChannelRecording = TRUE;
|
||||
|
||||
/* Chip ID.*/
|
||||
OpenChip.ulUserChipId = 1;
|
||||
|
||||
/* Set the max number of accesses to 1024 to speed things up */
|
||||
/* OpenChip.ulMaxRwAccesses = 1024; */
|
||||
|
||||
/* Set the maximums that the chip needs to support for this test */
|
||||
OpenChip.ulMaxChannels = 256;
|
||||
OpenChip.ulMaxPlayoutBuffers = 2;
|
||||
|
||||
OpenChip.ulMaxBiDirChannels = 0;
|
||||
OpenChip.ulMaxConfBridges = 0;
|
||||
OpenChip.ulMaxPhasingTssts = 0;
|
||||
OpenChip.ulMaxTdmStreams = 8;
|
||||
OpenChip.ulMaxTsiCncts = 0;
|
||||
|
||||
/* External Memory Settings: Use DDR memory*/
|
||||
OpenChip.ulMemoryType = cOCT6100_MEM_TYPE_DDR;
|
||||
|
||||
OpenChip.ulNumMemoryChips = 1;
|
||||
OpenChip.ulMemoryChipSize = cOCT6100_MEMORY_CHIP_SIZE_32MB;
|
||||
|
||||
|
||||
/* Load the image file */
|
||||
ulResult = load_file( filename,
|
||||
&pbyImageData,
|
||||
&ulImageByteSize );
|
||||
|
||||
if (pbyImageData == NULL || ulImageByteSize == 0){
|
||||
ERR("Bad pbyImageData or ulImageByteSize\n");
|
||||
return 1;
|
||||
}
|
||||
if ( ulResult != 0 ) {
|
||||
ERR("Failed load_file %s (%08X)\n", filename, ulResult);
|
||||
return ulResult;
|
||||
}
|
||||
|
||||
/* Assign the image file.*/
|
||||
OpenChip.pbyImageFile = pbyImageData;
|
||||
OpenChip.ulImageSize = ulImageByteSize;
|
||||
|
||||
/* Inserting default values into tOCT6100_GET_INSTANCE_SIZE structure parameters. */
|
||||
Oct6100GetInstanceSizeDef ( &InstanceSize );
|
||||
|
||||
/* Get the size of the OCT6100 instance structure. */
|
||||
ulResult = Oct6100GetInstanceSize(&OpenChip, &InstanceSize );
|
||||
if (ulResult != cOCT6100_ERR_OK)
|
||||
{
|
||||
ERR("Oct6100GetInstanceSize failed (%08X)\n", ulResult);
|
||||
return ulResult;
|
||||
}
|
||||
|
||||
pApiInstance = malloc(InstanceSize.ulApiInstanceSize);
|
||||
echo_mod->pApiInstance = pApiInstance;
|
||||
echo_mod->astribank = astribank;
|
||||
|
||||
if (!pApiInstance) {
|
||||
ERR("Out of memory (can't allocate %d bytes)!\n", InstanceSize.ulApiInstanceSize);
|
||||
return 1;
|
||||
}
|
||||
|
||||
/* Perform actual open of chip */
|
||||
ulResult = Oct6100ChipOpen(pApiInstance, &OpenChip);
|
||||
if (ulResult != cOCT6100_ERR_OK) {
|
||||
ERR("Oct6100ChipOpen failed: result=%X\n", ulResult);
|
||||
return ulResult;
|
||||
}
|
||||
DBG("%s: OCT6100 is open\n", __func__);
|
||||
|
||||
/* Free the image file data */
|
||||
free( pbyImageData );
|
||||
|
||||
/**************************************************************************/
|
||||
/**************************************************************************/
|
||||
/* 2) Open channels in echo cancellation mode. */
|
||||
/**************************************************************************/
|
||||
/**************************************************************************/
|
||||
|
||||
for( nChan = 0; nChan < ECHO_MAX_CHANS; nChan++ ) {
|
||||
nSlot = nChan;
|
||||
/* open a channel.*/
|
||||
Oct6100ChannelOpenDef( &ChannelOpen );
|
||||
|
||||
/* Assign the handle memory.*/
|
||||
ChannelOpen.pulChannelHndl = &ulChanHndl;
|
||||
|
||||
/* Set the channel to work at the echo cancellation mode.*/
|
||||
ChannelOpen.ulEchoOperationMode = cOCT6100_ECHO_OP_MODE_NORMAL;
|
||||
|
||||
pcmLaw = (is_alaw ? cOCT6100_PCM_A_LAW: cOCT6100_PCM_U_LAW);
|
||||
|
||||
/* Configure the TDM interface.*/
|
||||
ChannelOpen.TdmConfig.ulRinPcmLaw = pcmLaw;
|
||||
ChannelOpen.TdmConfig.ulRinStream = ECHO_RIN_STREAM;
|
||||
ChannelOpen.TdmConfig.ulRinTimeslot = nSlot;
|
||||
|
||||
ChannelOpen.TdmConfig.ulSinPcmLaw = pcmLaw;
|
||||
ChannelOpen.TdmConfig.ulSinStream = ECHO_SIN_STREAM;
|
||||
ChannelOpen.TdmConfig.ulSinTimeslot = nSlot;
|
||||
|
||||
ChannelOpen.TdmConfig.ulRoutPcmLaw = pcmLaw;
|
||||
ChannelOpen.TdmConfig.ulRoutStream = ECHO_ROUT_STREAM;
|
||||
ChannelOpen.TdmConfig.ulRoutTimeslot = nSlot;
|
||||
|
||||
ChannelOpen.TdmConfig.ulSoutPcmLaw = pcmLaw;
|
||||
ChannelOpen.TdmConfig.ulSoutStream = ECHO_SOUT_STREAM;
|
||||
ChannelOpen.TdmConfig.ulSoutTimeslot = nSlot;
|
||||
|
||||
/* Set the desired VQE features.*/
|
||||
ChannelOpen.VqeConfig.fEnableNlp = TRUE;
|
||||
ChannelOpen.VqeConfig.fRinDcOffsetRemoval = TRUE;
|
||||
ChannelOpen.VqeConfig.fSinDcOffsetRemoval = TRUE;
|
||||
|
||||
ChannelOpen.VqeConfig.ulComfortNoiseMode = cOCT6100_COMFORT_NOISE_NORMAL;
|
||||
/* cOCT6100_COMFORT_NOISE_NORMAL
|
||||
cOCT6100_COMFORT_NOISE_EXTENDED,
|
||||
cOCT6100_COMFORT_NOISE_OFF,
|
||||
cOCT6100_COMFORT_NOISE_FAST_LATCH
|
||||
*/
|
||||
ulResult = Oct6100ChannelOpen( pApiInstance,
|
||||
&ChannelOpen );
|
||||
if (ulResult != cOCT6100_ERR_OK) {
|
||||
ERR("Found error on chan %d\n", nChan);
|
||||
return ulResult;
|
||||
}
|
||||
}
|
||||
|
||||
/**************************************************************************/
|
||||
/**************************************************************************/
|
||||
/* *) Open channels in echo cancellation mode for second bus. */
|
||||
/**************************************************************************/
|
||||
/**************************************************************************/
|
||||
|
||||
for( nChan = 8; nChan < 32; nChan++ ) {
|
||||
nSlot = (nChan >> 3) * 32 + (nChan & 0x07);
|
||||
/* open a channel.*/
|
||||
Oct6100ChannelOpenDef( &ChannelOpen );
|
||||
|
||||
/* Assign the handle memory.*/
|
||||
ChannelOpen.pulChannelHndl = &ulChanHndl;
|
||||
|
||||
/* Set the channel to work at the echo cancellation mode.*/
|
||||
ChannelOpen.ulEchoOperationMode = cOCT6100_ECHO_OP_MODE_NORMAL;
|
||||
|
||||
/* Configure the TDM interface.*/
|
||||
ChannelOpen.TdmConfig.ulRinStream = ECHO_RIN_STREAM2;;
|
||||
ChannelOpen.TdmConfig.ulRinTimeslot = nSlot;
|
||||
|
||||
ChannelOpen.TdmConfig.ulSinStream = ECHO_SIN_STREAM2;
|
||||
ChannelOpen.TdmConfig.ulSinTimeslot = nSlot;
|
||||
|
||||
ChannelOpen.TdmConfig.ulRoutStream = ECHO_ROUT_STREAM2;
|
||||
ChannelOpen.TdmConfig.ulRoutTimeslot = nSlot;
|
||||
|
||||
ChannelOpen.TdmConfig.ulSoutStream = ECHO_SOUT_STREAM2;
|
||||
ChannelOpen.TdmConfig.ulSoutTimeslot = nSlot;
|
||||
|
||||
/* Set the desired VQE features.*/
|
||||
ChannelOpen.VqeConfig.fEnableNlp = TRUE;
|
||||
ChannelOpen.VqeConfig.fRinDcOffsetRemoval = TRUE;
|
||||
ChannelOpen.VqeConfig.fSinDcOffsetRemoval = TRUE;
|
||||
|
||||
ChannelOpen.VqeConfig.ulComfortNoiseMode = cOCT6100_COMFORT_NOISE_NORMAL;
|
||||
/* cOCT6100_COMFORT_NOISE_NORMAL
|
||||
cOCT6100_COMFORT_NOISE_EXTENDED,
|
||||
cOCT6100_COMFORT_NOISE_OFF,
|
||||
cOCT6100_COMFORT_NOISE_FAST_LATCH
|
||||
*/
|
||||
ulResult = Oct6100ChannelOpen( pApiInstance,
|
||||
&ChannelOpen );
|
||||
if (ulResult != cOCT6100_ERR_OK) {
|
||||
ERR("Found error on chan %d\n", nChan);
|
||||
return ulResult;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
DBG("%s: Finishing\n", __func__);
|
||||
free(pApiInstance);
|
||||
free(echo_mod);
|
||||
return cOCT6100_ERR_OK;
|
||||
|
||||
}
|
||||
//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||||
|
||||
int load_echo(struct astribank_device *astribank, char *filename, int is_alaw)
|
||||
{
|
||||
int iLen;
|
||||
int ret;
|
||||
unsigned char *pbyFileData = NULL;
|
||||
const char *devstr;
|
||||
|
||||
devstr = xusb_devpath(astribank->xusb);
|
||||
INFO("%s [%s]: Loading ECHOCAN Firmware: %s (%s)\n",
|
||||
devstr, xusb_serial(astribank->xusb), filename,
|
||||
(is_alaw) ? "alaw" : "ulaw");
|
||||
usb_buffer_init(astribank, &usb_buffer);
|
||||
ret = init_octasic(filename, astribank, is_alaw);
|
||||
if (ret) {
|
||||
ERR("ECHO %s burning failed (%08X)\n", filename, ret);
|
||||
return -ENODEV;
|
||||
}
|
||||
ret = usb_buffer_flush(astribank, &usb_buffer);
|
||||
if (ret < 0) {
|
||||
ERR("ECHO %s buffer flush failed (%d)\n", filename, ret);
|
||||
return -ENODEV;
|
||||
}
|
||||
usb_buffer_showstatistics(astribank, &usb_buffer);
|
||||
return 0;
|
||||
}
|
||||
|
||||
int echo_ver(struct astribank_device *astribank)
|
||||
{
|
||||
usb_buffer_init(astribank, &usb_buffer);
|
||||
return get_ver(astribank);
|
||||
}
|
||||
|
||||
|
|
@ -0,0 +1,32 @@
|
|||
#ifndef ECHO_LOADER_H
|
||||
#define ECHO_LOADER_H
|
||||
/*
|
||||
* Written by Oron Peled <oron@actcom.co.il>
|
||||
* Copyright (C) 2008, Xorcom
|
||||
*
|
||||
* All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <stdint.h>
|
||||
#include "astribank_usb.h"
|
||||
|
||||
int spi_send(struct astribank_device *astribank, uint16_t addr, uint16_t data, int recv_answer, int ver);
|
||||
int load_echo(struct astribank_device *astribank, char *filename, int is_alaw);
|
||||
int echo_ver(struct astribank_device *astribank);
|
||||
|
||||
#endif /* ECHO_LOADER_H */
|
||||
|
|
@ -327,6 +327,14 @@ sub new($$$$$) {
|
|||
# static xpd related helper functions
|
||||
#------------------------------------
|
||||
|
||||
# Returns only the telephony XPD's from a list
|
||||
# of one or more XPD's.
|
||||
# I.e: Filters-out ECHO cancelers
|
||||
sub telephony_devs {
|
||||
my @devs = grep { $_->channels } @_;
|
||||
return @devs;
|
||||
}
|
||||
|
||||
sub format_rank($$) {
|
||||
my ($rank, $prio) = @_;
|
||||
my $width = 2;
|
||||
|
|
|
|||
|
|
@ -56,7 +56,7 @@ fi
|
|||
|
||||
# Wait for driver and first device
|
||||
echo -n 1>&2 "Astribanks detection "
|
||||
tries=10
|
||||
tries=40
|
||||
while [ ! -e "/sys/bus/astribanks/devices/xbus-00" ]
|
||||
do
|
||||
if [ "$tries" -le 0 ]; then
|
||||
|
|
|
|||
|
|
@ -67,9 +67,11 @@ USB_PREFIX=
|
|||
FIRMWARE_DIR="${FIRMWARE_DIR:-/usr/share/dahdi}"
|
||||
ASTRIBANK_HEXLOAD=${ASTRIBANK_HEXLOAD:-/usr/sbin/astribank_hexload}
|
||||
ASTRIBANK_TOOL=${ASTRIBANK_TOOL:-/usr/sbin/astribank_tool}
|
||||
XPP_CONFIG="${XPP_CONFIG:-/etc/dahdi/xpp.conf}"
|
||||
XPP_UDEV_SLEEP_TIME="${XPP_UDEV_SLEEP_TIME:-15}"
|
||||
|
||||
USB_FW="${USB_FW:-USB_FW.hex}"
|
||||
USB_RECOV="${USB_RECOV:-USB_RECOV.hex}"
|
||||
|
||||
if [ -r "$DEFAULTS" ]; then
|
||||
. "$DEFAULTS"
|
||||
|
|
@ -151,6 +153,38 @@ load_fw_device() {
|
|||
debug "FPGA loading $fw into $dev"
|
||||
run_astribank_hexload -D "$dev" -F "$FIRMWARE_DIR/$fw"
|
||||
if [ "$fw" = "FPGA_1161.hex" ]; then
|
||||
echo_file="$FIRMWARE_DIR/OCT6104E-256D.ima"
|
||||
law=''
|
||||
law_str='uLaw'
|
||||
abtool_output=`$ASTRIBANK_TOOL -D "$dev" -Q 2>/dev/null`
|
||||
card_type=`echo "$abtool_output" | grep '^CARD 4:' | cut -d= -f2 | cut -d. -f1`
|
||||
if [ "$card_type" = '5' ]; then
|
||||
debug "ECHO burning into $dev: $echo_file"
|
||||
card_type_first=`echo "$abtool_output" | grep '^CARD 0:' | cut -d= -f2 | cut -d. -f1`
|
||||
case "$card_type_first" in
|
||||
3) law="-A";;
|
||||
4)
|
||||
pri_protocol=''
|
||||
if [ -r "$XPP_CONFIG" ]; then
|
||||
pri_protocol=`awk '/^pri_protocol/ {print $2}' $XPP_CONFIG`
|
||||
fi
|
||||
# "E1" or empty (implied E1) means aLaw
|
||||
if [ "$pri_protocol" != 'T1' ]; then
|
||||
law='-A'
|
||||
fi
|
||||
;;
|
||||
esac
|
||||
if [ "$law" = '-A' ]; then
|
||||
law_str="aLaw"
|
||||
fi
|
||||
caps_num=`echo "$abtool_output" | grep 'ECHO ports' | sed -e 's/.*: *//'`
|
||||
debug "ECHO: 1st module is $law_str, $caps_num channels allowed."
|
||||
if [ "$caps_num" != '0' ]; then
|
||||
run_astribank_hexload -D "$dev" -O $law "$echo_file"
|
||||
else
|
||||
$LOGGER "WARNING: ECHO burning was skipped (no capabilities)"
|
||||
fi
|
||||
fi
|
||||
pic_files=`echo "$FIRMWARE_DIR"/PIC_TYPE_[1-4].hex`
|
||||
debug "PIC burning into $dev: $pic_files"
|
||||
run_astribank_hexload -D "$dev" -p $pic_files
|
||||
|
|
|
|||
Loading…
Reference in New Issue