menuselect: Remove last bits completely from the repo

menuselect has not been used in dahdi-tools since r10411 (7 months ago). This
patch removes menuselect from the repository completely.

Reported-by: Sean Bright
Internal-Issue-ID: DAHTOOL-61
Patches: kill-menuselect.patch by Sean Bright (license #5060)

Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>



git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@10721 17933a7a-c749-41c5-a318-cba88f637d49
This commit is contained in:
Russ Meyerriecks 2012-09-21 19:43:49 +00:00
parent 79ed81f9f5
commit b8d8cc4f8d
52 changed files with 4 additions and 32732 deletions

6
README
View File

@ -73,9 +73,9 @@ This can be useful for any partial install target from the list above.
Options For ./configure Options For ./configure
^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^
The configure script various several tests and based on them generates The configure script executes various tests and based on them generates
some files ( build_tools/menuselect-deps and makeopts). You can pass it makeopts. You can pass it --with options and variable settings, for
--with options and variable settings, for instance: instance:
./configure --without-ncurses CC="gcc-4.10" ./configure --without-ncurses CC="gcc-4.10"

View File

@ -1,7 +0,0 @@
#!/bin/sh
echo "<?xml version=\"1.0\"?>"
echo
echo "<menu name=\"DAHDI Tools Selection\">"
cat dahdi.xml
echo "</menu>"

View File

@ -1,2 +0,0 @@
LIBNEWT=@PBX_NEWT@
HDLC=@PBX_HDLC@

View File

@ -211,7 +211,7 @@ fi
AC_SUBST(PPPD_VERSION) AC_SUBST(PPPD_VERSION)
AC_CONFIG_FILES([build_tools/menuselect-deps makeopts]) AC_CONFIG_FILES([makeopts])
AC_OUTPUT AC_OUTPUT
AC_MSG_NOTICE(*** dahdi-tools build successfully configured ***) AC_MSG_NOTICE(*** dahdi-tools build successfully configured ***)

View File

@ -1,123 +0,0 @@
#
# Asterisk -- A telephony toolkit for Linux.
#
# Makefile for Menuselect
#
# Copyright (C) 2005-2008, Digium, Inc.
#
# Russell Bryant <russell@digium.com>
#
# This program is free software, distributed under the terms of
# the GNU General Public License
#
# even though we could use '-include makeopts' here, use a wildcard
# lookup anyway, so that make won't try to build makeopts if it doesn't
# exist (other rules will force it to be built if needed)
ifneq ($(wildcard makeopts),)
include makeopts
endif
.PHONY: clean dist-clean distclean test ntest ctest gtest
# Basic set of sources and flags/libraries/includes
OBJS:=menuselect.o strcompat.o
CFLAGS+=-g -D_GNU_SOURCE -Wall
ifeq ($(MENUSELECT_DEBUG),yes)
CFLAGS += -DMENUSELECT_DEBUG
endif
ifdef NCURSES_LIB
C_OBJS += menuselect_curses.o
C_LIBS +=$(NCURSES_LIB)
C_INCLUDE += $(NCURSES_INCLUDE)
ALL_TGTS += cmenuselect
else
ifdef CURSES_LIB
C_OBJS += menuselect_curses.o
C_LIBS +=$(CURSES_LIB)
C_INCLUDE += $(CURSES_INCLUDE)
ALL_TGTS += cmenuselect
endif
endif
ifdef GTK2_LIB
G_OBJS += menuselect_gtk.o
G_LIBS += $(GTK2_LIB)
G_INCLUDE += $(GTK2_INCLUDE)
ALL_TGTS += gmenuselect
endif
ifdef NEWT_LIB
N_OBJS += menuselect_newt.o
N_LIBS += $(NEWT_LIB)
N_INCLUDE += $(NEWT_INCLUDE)
ALL_TGTS += nmenuselect
endif
M_OBJS += menuselect_stub.o
ALL_TGTS += menuselect
all: $(ALL_TGTS)
$(OBJS) $(C_OBJS) $(N_OBJS) $(G_OBJS) $(M_OBJS): autoconfig.h menuselect.h
makeopts autoconfig.h: autoconfig.h.in makeopts.in
@./configure $(CONFIGURE_SILENT)
$(ALL_TGTS): mxml/libmxml.a
ifdef C_OBJS
menuselect_curses.o: CFLAGS+=$(C_INCLUDE)
cmenuselect: $(OBJS) $(C_OBJS)
$(CC) $(LDFLAGS) -o $@ $^ $(C_LIBS)
else
cmenuselect:
endif
ifdef G_OBJS
menuselect_gtk.o: CFLAGS+=$(G_INCLUDE)
gmenuselect: $(OBJS) $(G_OBJS)
$(CC) $(LDFLAGS) -o $@ $^ $(G_LIBS)
else
gmenuselect:
endif
ifdef N_OBJS
menuselect_newt.o: CFLAGS+=$(N_INCLUDE)
nmenuselect: $(OBJS) $(N_OBJS)
$(CC) $(LDFLAGS) -o $@ $^ $(N_LIBS)
else
nmenuselect:
endif
menuselect: $(OBJS) $(M_OBJS)
$(CC) $(LDFLAGS) -o $@ $^ $(M_LIBS)
mxml/libmxml.a:
@if test ! -f mxml/Makefile ; then cd mxml && ./configure ; fi
@$(MAKE) -C mxml libmxml.a
test: menuselect
(cd test; ../$< menuselect.makeopts)
ctest: cmenuselect
(cd test; ../$< menuselect.makeopts)
gtest: gmenuselect
(cd test; ../$< menuselect.makeopts)
ntest: nmenuselect
(cd test; ../$< menuselect.makeopts)
clean:
rm -f menuselect cmenuselect gmenuselect nmenuselect $(OBJS) $(M_OBJS) $(C_OBJS) $(G_OBJS) $(N_OBJS)
@if test -f mxml/Makefile ; then $(MAKE) -C mxml clean ; fi
dist-clean: distclean
distclean: clean
@if test -f mxml/Makefile ; then $(MAKE) -C mxml distclean ; fi
rm -f autoconfig.h config.status config.log makeopts
rm -rf autom4te.cache

View File

@ -1,179 +0,0 @@
MENUSELECT
Copyright (C) 2005-2006, Digium, Inc.
Russell Bryant <russell@digium.com>
-------------------------------------------------------------------------------
ABOUT
Menuselect is a tool designed to be used in conjunction with GNU make. It
allows for an XML specification of Makefile variables and optional space
delimited values of these variables. These values can then be used in the
Makefile to make various decisions during the build process.
Menuselect also provides a mechanism for dependency checking for each possible
member (value) of each category (Makefile variable). These dependencies are
generally checked by using autoconf and the results provided to menuselect. If
dependencies for a member are not met, the user will not be allowed to make
that selection. In the same way the menuselect does dependency checking, it
also does conflict checking. If a listed conflict for a member is met, then
the user will not be allowed to select it.
For use with automated builds or when the user has no desire to make selections
different than the defined defaults, menuselect can generate a default output
file for use in the build.
Menuselect can also do a sanity check on existing input files. If any member
has been selected that has conflicts or unmet dependencies, then menuselect
will exit with an error and output to notify the user of the situation. This is
typically done at the beginning of the build process to ensure that given all
of the known information, the build is going to be successful.
MENUSELECT DEPENDENCIES
libncurses -- This is needed for the curses frontend.
libnewt -- This is needed for the newt frontend (optional).
libmxml -- This library, Mini-XML, is used for XML parsing.
(http://www.easysw.com/~mike/mxml/)
(Asterisk uses the code in http://svn.digium.com/svn/mxml/ )
ENVIRONMENT SETUP
The file menuselect.h contains a couple of defines which specify locations for
various files. These locations are relative to the directory from which
menuselect will be executed.
#define OUTPUT_MAKEOPTS_DEFAULT "menuselect.makeopts"
This is the location where the menuselect output will be saved.
#define MENUSELECT_DEPS "build_tools/menuselect-deps"
This is the location where menuselect will expect to find the input file that
provides dependency and conflict information. More information on the format of
this file can be found in the section about dependency and conflict checking.
DEPENDENCY AND CONFLICT CHECKING
Members may have as many conflicts and dependencies specified as needed. An
example of the MENUSELECT_DEPS file would look like this:
DEPENDENCY1=1
DEPENDENCY2=0
CONFLICT1=0
In this case, "DEPENDENCY1" has been met, "DEPENDENCY2" has not been met, and
"CONFLICT1" is not present.
To ask menuselect to do a background sanity check on dependencies and
conflicts, it can be called like this:
./menuselect --check-deps <input_file1> [input_file2] [...]
The format of the input files must be of the same format menuselect uses to
create the OUPUT_MAKEOPTS_DEFAULT.
ENABLING AND DISABLING OPTIONS FROM THE COMMAND LINE
If you would like menuselect to update choices via the command line, it can be
done with the following syntax:
Enable an option:
$ menuselect/menuselect --enable TEST_FRAMEWORK menuselect.makeopts
Enable all options in a category:
$ menuselect/menuselect --enable-category MENUSELECT_TEST menuselect.makeopts
Disable an option:
$ menuselect/menuselect --disable TEST_FRAMEWORK menuselect.makeopts
Disable all options in a category:
$ menuselect/menuselect --disable-category MENUSELECT_TEST menuselect.makeopts
SETTING UP AVAILABLE OPTIONS
The XML specification for the menu lives in the file "menuselect-tree" and should
be in the same directory that menuselect will be executed from. An example
menuselect-tree file as used in the Asterisk project (http://www.asterisk.org) is
provided in example_menuselect-tree
Menu:
The top level tag in menuselect-tree is the <menu> tag. All of the categories
reside inside of the <menu> ... </menu> block.
Menu Attributes:
name="Asterisk Module Selection"
This specifies the title of the menu. It is displayed at the top of the
screen when using the curses frontend
Categories:
A <category> contains members. The category tag can contain a number of
different attributes to specify different behavior.
Category Attributes:
name="MENUSELECT_APPS"
The name attribute is required. This is the name of the variable that will
be in the output from menuselect.
displayname="Applications"
If this is specfied, this is what will be shown in the menu to the user.
positive_output="yes"
The default for menuselect is to output all of the members of a category
that are *not* selected. This is because it is often convenient to be able
to define a full list in the Makefile and then filter out the results from
menuselect. Using GNU make, an example of this would be:
APPS:=$(filter-out $(MENUSELECT_APPS),$(APPS))
remove_on_change=".lastclean"
This attribute can contain a space delimited list of files to be deleted
when it is time to build an output file if any of the members of this
category have changed values from their values for existing input when the
application was started.
Members:
A <member> contains conflicts and dependencies. The member tag can contain a
number of different attributes to specify different behavior.
Member Attributes:
name="app_meetme"
The name attribute is required. This is the value that will be added to the
variable specified by the category when selected (or not selected) depending
on the setting of the positive_output attribute of the category.
displayname="Call Conferencing Application"
If this is specified, this will be provided as a description of this member
when the cursor is on it in the menu.
remove_on_change="apps/app_meetme.o apps/app_meetme.so"
This attribute can contain a space delimeted list of files to be deleted
when it is time to build an output file if the value of this member has
changed from its value in any existing input when the application was
started.
Dependencies:
A dependency for a <member> is specified using a <depend> tag. The name of
the dependency corresponds to names in the MENUSELECT_DEPS file. This is an
example of specifying a dependency for a member:
<member name="app_meetme">
<depend>zaptel</depend>
</member>
Conflicts:
A conflict for a <member> is specified using a <conflict> tag. The name of
the conflict corresponds to names in the MENUSELECT_DEPS file. This is an
example of specifying a dependency for a member:
<member name="res_musiconhold">
<conflict>win32</conflict>
</member>
REPORTING BUGS
Any bug reports or feature enhancement submissions to menuselect should be
submitted at https://issues.asterisk.org/
Thank you!

View File

@ -1,199 +0,0 @@
# Helper function to check for gcc attributes.
# AST_GCC_ATTRIBUTE([attribute name], [attribute syntax], [attribute scope], [makeopts flag])
AC_DEFUN([AST_GCC_ATTRIBUTE],
[
AC_MSG_CHECKING(checking for compiler 'attribute $1' support)
saved_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -Wall -Wno-unused -Werror"
m4_ifval([$4],$4=0)
if test "x$2" = "x"
then
AC_COMPILE_IFELSE(
AC_LANG_PROGRAM([$3 void __attribute__(($1)) *test(void *muffin, ...) {return (void *) 0;}],
[]),
AC_MSG_RESULT(yes)
m4_ifval([$4],$4=1)
AC_DEFINE_UNQUOTED([HAVE_ATTRIBUTE_$1], 1, [Define to 1 if your GCC C compiler supports the '$1' attribute.]),
AC_MSG_RESULT(no)
)
else
AC_COMPILE_IFELSE(
AC_LANG_PROGRAM([$3 void __attribute__(($2)) *test(void *muffin, ...) {return (void *) 0;}],
[]),
AC_MSG_RESULT(yes)
m4_ifval([$4],$4=1)
AC_DEFINE_UNQUOTED([HAVE_ATTRIBUTE_$1], 1, [Define to 1 if your GCC C compiler supports the '$1' attribute.]),
AC_MSG_RESULT(no)
)
fi
m4_ifval([$4],[AC_SUBST($4)])
CFLAGS="$saved_CFLAGS"
])
# AST_EXT_LIB_SETUP([package symbol name], [package friendly name], [package option name], [additional help text])
AC_DEFUN([AST_EXT_LIB_SETUP],
[
$1_DESCRIP="$2"
$1_OPTION="$3"
AC_ARG_WITH([$3], AC_HELP_STRING([--with-$3=PATH],[use $2 files in PATH $4]),[
case ${withval} in
n|no)
USE_$1=no
;;
y|ye|yes)
$1_MANDATORY="yes"
;;
*)
$1_DIR="${withval}"
$1_MANDATORY="yes"
;;
esac
])
PBX_$1=0
AC_SUBST([$1_LIB])
AC_SUBST([$1_INCLUDE])
AC_SUBST([PBX_$1])
])
# AST_EXT_LIB_CHECK([package symbol name], [package library name], [function to check], [package header], [additional LIB data])
AC_DEFUN([AST_EXT_LIB_CHECK],
[
if test "${USE_$1}" != "no"; then
pbxlibdir=""
if test "x${$1_DIR}" != "x"; then
if test -d ${$1_DIR}/lib; then
pbxlibdir="-L${$1_DIR}/lib"
else
pbxlibdir="-L${$1_DIR}"
fi
fi
AC_CHECK_LIB([$2], [$3], [AST_$1_FOUND=yes], [AST_$1_FOUND=no], ${pbxlibdir} $5)
if test "${AST_$1_FOUND}" = "yes"; then
$1_LIB="-l$2 $5"
$1_HEADER_FOUND="1"
if test "x${$1_DIR}" != "x"; then
$1_LIB="${pbxlibdir} ${$1_LIB}"
$1_INCLUDE="-I${$1_DIR}/include"
if test "x$4" != "x" ; then
AC_CHECK_HEADER([${$1_DIR}/include/$4], [$1_HEADER_FOUND=1], [$1_HEADER_FOUND=0] )
fi
else
if test "x$4" != "x" ; then
AC_CHECK_HEADER([$4], [$1_HEADER_FOUND=1], [$1_HEADER_FOUND=0] )
fi
fi
if test "x${$1_HEADER_FOUND}" = "x0" ; then
if test ! -z "${$1_MANDATORY}" ;
then
AC_MSG_NOTICE( ***)
AC_MSG_NOTICE( *** It appears that you do not have the $2 development package installed.)
AC_MSG_NOTICE( *** Please install it to include ${$1_DESCRIP} support, or re-run configure)
AC_MSG_NOTICE( *** without explicitly specifying --with-${$1_OPTION})
exit 1
fi
$1_LIB=""
$1_INCLUDE=""
PBX_$1=0
else
PBX_$1=1
AC_DEFINE_UNQUOTED([HAVE_$1], 1, [Define to indicate the ${$1_DESCRIP} library])
fi
elif test ! -z "${$1_MANDATORY}";
then
AC_MSG_NOTICE(***)
AC_MSG_NOTICE(*** The ${$1_DESCRIP} installation on this system appears to be broken.)
AC_MSG_NOTICE(*** Either correct the installation, or run configure)
AC_MSG_NOTICE(*** without explicitly specifying --with-${$1_OPTION})
exit 1
fi
fi
])
AC_DEFUN(
[AST_CHECK_GNU_MAKE], [AC_CACHE_CHECK([for GNU make], [ac_cv_GNU_MAKE],
ac_cv_GNU_MAKE='Not Found' ;
ac_cv_GNU_MAKE_VERSION_MAJOR=0 ;
ac_cv_GNU_MAKE_VERSION_MINOR=0 ;
for a in make gmake gnumake ; do
if test -z "$a" ; then continue ; fi ;
if ( sh -c "$a --version" 2> /dev/null | grep GNU 2>&1 > /dev/null ) ; then
ac_cv_GNU_MAKE=$a ;
ac_cv_GNU_MAKE_VERSION_MAJOR=`$ac_cv_GNU_MAKE --version | grep "GNU Make" | cut -f3 -d' ' | cut -f1 -d'.'`
ac_cv_GNU_MAKE_VERSION_MINOR=`$ac_cv_GNU_MAKE --version | grep "GNU Make" | cut -f2 -d'.' | cut -c1-2`
break;
fi
done ;
) ;
if test "x$ac_cv_GNU_MAKE" = "xNot Found" ; then
AC_MSG_ERROR( *** Please install GNU make. It is required to build Asterisk!)
exit 1
fi
AC_SUBST([GNU_MAKE], [$ac_cv_GNU_MAKE])
])
# AST_FUNC_FORK
# -------------
AN_FUNCTION([fork], [AST_FUNC_FORK])
AN_FUNCTION([vfork], [AST_FUNC_FORK])
AC_DEFUN([AST_FUNC_FORK],
[AC_REQUIRE([AC_TYPE_PID_T])dnl
AC_CHECK_HEADERS(vfork.h)
AC_CHECK_FUNCS(fork vfork)
if test "x$ac_cv_func_fork" = xyes; then
_AST_FUNC_FORK
else
ac_cv_func_fork_works=$ac_cv_func_fork
fi
if test "x$ac_cv_func_fork_works" = xcross; then
case $host in
*-*-amigaos* | *-*-msdosdjgpp* | *-*-uclinux* | *-*-linux-uclibc* )
# Override, as these systems have only a dummy fork() stub
ac_cv_func_fork_works=no
;;
*)
ac_cv_func_fork_works=yes
;;
esac
AC_MSG_WARN([result $ac_cv_func_fork_works guessed because of cross compilation])
fi
ac_cv_func_vfork_works=$ac_cv_func_vfork
if test "x$ac_cv_func_vfork" = xyes; then
_AC_FUNC_VFORK
fi;
if test "x$ac_cv_func_fork_works" = xcross; then
ac_cv_func_vfork_works=$ac_cv_func_vfork
AC_MSG_WARN([result $ac_cv_func_vfork_works guessed because of cross compilation])
fi
if test "x$ac_cv_func_vfork_works" = xyes; then
AC_DEFINE(HAVE_WORKING_VFORK, 1, [Define to 1 if `vfork' works.])
else
AC_DEFINE(vfork, fork, [Define as `fork' if `vfork' does not work.])
fi
if test "x$ac_cv_func_fork_works" = xyes; then
AC_DEFINE(HAVE_WORKING_FORK, 1, [Define to 1 if `fork' works.])
fi
])# AST_FUNC_FORK
# _AST_FUNC_FORK
# -------------
AC_DEFUN([_AST_FUNC_FORK],
[AC_CACHE_CHECK(for working fork, ac_cv_func_fork_works,
[AC_RUN_IFELSE(
[AC_LANG_PROGRAM([AC_INCLUDES_DEFAULT],
[
/* By Ruediger Kuhlmann. */
return fork () < 0;
])],
[ac_cv_func_fork_works=yes],
[ac_cv_func_fork_works=no],
[ac_cv_func_fork_works=cross])])]
)# _AST_FUNC_FORK

14
menuselect/aclocal.m4 vendored
View File

@ -1,14 +0,0 @@
# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
m4_include([acinclude.m4])

View File

@ -1,128 +0,0 @@
/* autoconfig.h.in. Generated from configure.ac by autoheader. */
#ifndef MENUSELECT_AUTOCONFIG_H
#define MENUSELECT_AUTOCONFIG_H
#ifndef _REENTRANT
#define _REENTRANT
#endif
/* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP
systems. This function is required for `alloca.c' support on those systems.
*/
#undef CRAY_STACKSEG_END
/* Define to 1 if using `alloca.c'. */
#undef C_ALLOCA
/* Define to 1 if you have `alloca', as a function or macro. */
#undef HAVE_ALLOCA
/* Define to 1 if you have <alloca.h> and it should be used (not on Ultrix).
*/
#undef HAVE_ALLOCA_H
/* Define to 1 if you have the `asprintf' function. */
#undef HAVE_ASPRINTF
/* Define to 1 if your GCC C compiler supports the 'weak' attribute. */
#undef HAVE_ATTRIBUTE_weak
/* Define to 1 if your GCC C compiler supports the 'weak_import' attribute. */
#undef HAVE_ATTRIBUTE_weak_import
/* Define to 1 if your GCC C compiler supports the 'weakref' attribute. */
#undef HAVE_ATTRIBUTE_weakref
/* Define to indicate the ${CURSES_DESCRIP} library */
#undef HAVE_CURSES
/* Define to 1 if you have the `getloadavg' function. */
#undef HAVE_GETLOADAVG
/* Define if your system has the GTK2 libraries. */
#undef HAVE_GTK2
/* Define to 1 if you have the <inttypes.h> header file. */
#undef HAVE_INTTYPES_H
/* Define to 1 if you have the <memory.h> header file. */
#undef HAVE_MEMORY_H
/* Define to indicate the ${NCURSES_DESCRIP} library */
#undef HAVE_NCURSES
/* Define to indicate the ${NEWT_DESCRIP} library */
#undef HAVE_NEWT
/* Define to 1 if you have the `setenv' function. */
#undef HAVE_SETENV
/* Define to 1 if you have the <stdint.h> header file. */
#undef HAVE_STDINT_H
/* Define to 1 if you have the <stdlib.h> header file. */
#undef HAVE_STDLIB_H
/* Define to 1 if you have the `strcasestr' function. */
#undef HAVE_STRCASESTR
/* Define to 1 if you have the <strings.h> header file. */
#undef HAVE_STRINGS_H
/* Define to 1 if you have the <string.h> header file. */
#undef HAVE_STRING_H
/* Define to 1 if you have the `strndup' function. */
#undef HAVE_STRNDUP
/* Define to 1 if you have the `strnlen' function. */
#undef HAVE_STRNLEN
/* Define to 1 if you have the `strsep' function. */
#undef HAVE_STRSEP
/* Define to 1 if you have the <sys/stat.h> header file. */
#undef HAVE_SYS_STAT_H
/* Define to 1 if you have the <sys/types.h> header file. */
#undef HAVE_SYS_TYPES_H
/* Define to 1 if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H
/* Define to 1 if you have the `unsetenv' function. */
#undef HAVE_UNSETENV
/* Define to 1 if you have the `vasprintf' function. */
#undef HAVE_VASPRINTF
/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT
/* Define to the full name of this package. */
#undef PACKAGE_NAME
/* Define to the full name and version of this package. */
#undef PACKAGE_STRING
/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
/* Define to the version of this package. */
#undef PACKAGE_VERSION
/* If using the C implementation of alloca, define if you know the
direction of stack growth for your system; otherwise it will be
automatically deduced at runtime.
STACK_DIRECTION > 0 => grows toward higher addresses
STACK_DIRECTION < 0 => grows toward lower addresses
STACK_DIRECTION = 0 => direction of growth unknown */
#undef STACK_DIRECTION
/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS
#endif

View File

@ -1,41 +0,0 @@
#!/bin/sh
check_for_app() {
$1 --version 2>&1 >/dev/null
if [ $? != 0 ]
then
echo "Please install $1 and run bootstrap.sh again!"
exit 1
fi
}
uname -s | grep -q FreeBSD
if [ $? = 0 ]
then
check_for_app autoconf259
check_for_app autoheader259
check_for_app automake19
check_for_app aclocal19
echo "Generating the configure script ..."
aclocal19 2>/dev/null
autoconf259
autoheader259
automake19 --add-missing --copy 2>/dev/null
else
AUTOCONF_VERSION=2.59
AUTOMAKE_VERSION=1.9
export AUTOCONF_VERSION
export AUTOMAKE_VERSION
check_for_app autoconf
check_for_app autoheader
check_for_app automake
check_for_app aclocal
echo "Generating the configure script ..."
aclocal 2>/dev/null
autoconf
autoheader
automake --add-missing --copy 2>/dev/null
fi
exit 0

1501
menuselect/config.guess vendored

File diff suppressed because it is too large Load Diff

1705
menuselect/config.sub vendored

File diff suppressed because it is too large Load Diff

7422
menuselect/configure vendored

File diff suppressed because it is too large Load Diff

View File

@ -1,146 +0,0 @@
# Process this file with autoconf to produce a configure script.
AC_PREREQ(2.59)
m4_define([MENUSELECT_VERSION],
m4_bpatsubst(m4_esyscmd([./make_version .]),
[\([0-9.]*\)\(\w\|\W\)*],
[\1]))
AC_INIT(menuselect, MENUSELECT_VERSION, www.asterisk.org)
# check existence of the package
AC_CONFIG_SRCDIR([menuselect.c])
# specify output header file
AC_CONFIG_HEADER(autoconfig.h)
AC_COPYRIGHT("Menuselect")
AC_REVISION($Revision: 40837 $)
AC_CANONICAL_BUILD
AC_CANONICAL_HOST
HOST_OS=${host_os}
AC_SUBST(HOST_OS)
PBX_WINARCH=0
case "${host_os}" in
freebsd*)
OSARCH=FreeBSD
;;
netbsd*)
OSARCH=NetBSD
;;
openbsd*)
OSARCH=OpenBSD
;;
solaris*)
OSARCH=SunOS
;;
mingw32)
OSARCH=mingw32
PBX_WINARCH=1
;;
cygwin)
OSARCH=cygwin
PBX_WINARCH=1
;;
linux-gnueabi)
OSARCH=linux-gnu
;;
*)
OSARCH=${host_os}
;;
esac
AH_TOP(
#ifndef MENUSELECT_AUTOCONFIG_H
#define MENUSELECT_AUTOCONFIG_H
#ifndef _REENTRANT
#define _REENTRANT
#endif
)
AH_BOTTOM(
#endif
)
# Checks for programs.
AC_PROG_CC
AST_CHECK_GNU_MAKE
AC_LANG(C)
AC_ARG_ENABLE([debug],
[AS_HELP_STRING([--enable-debug], [Turn on debug mode])],
[case "${enableval}" in
y|ye|yes) MENUSELECT_DEBUG=yes ;;
n|no) MENUSELECT_DEBUG=no ;;
*) AC_MSG_ERROR(bad value ${enableval} for --enable-debug) ;;
esac])
AC_SUBST(MENUSELECT_DEBUG)
# Support weak symbols on a platform specific basis. The Mac OS X
# (Darwin) support must be isolated from the other platforms because
# it has caused other platforms to fail.
#
case "${OSARCH}" in
darwin*)
# Allow weak symbol support on Darwin platforms only because there
# is active community support for it.
# However, Darwin seems to break weak symbols for each new version.
#
AST_GCC_ATTRIBUTE(weak_import, [], [], PBX_WEAKREF)
# Several other platforms including Linux have GCC versions that
# define the weak attribute. However, this attribute is only
# setup for use in the code by Darwin.
AST_GCC_ATTRIBUTE(weak, [], [], PBX_WEAKREF)
;;
linux-gnu)
# Primarily support weak symbols on Linux platforms.
#
AST_GCC_ATTRIBUTE(weakref, [weakref("foo")], static, PBX_WEAKREF)
;;
*)
# Allow weak symbols on other platforms. However, any problems
# with this feature on other platforms must be fixed by the
# community.
#
AST_GCC_ATTRIBUTE(weakref, [weakref("foo")], static, PBX_WEAKREF)
;;
esac
AC_FUNC_ALLOCA
AC_CHECK_FUNCS([asprintf getloadavg setenv strcasestr strndup strnlen strsep unsetenv vasprintf])
# The frontend can use curses, ncurses, newt or GTK2 so check for all of them
AST_EXT_LIB_SETUP([NEWT], [newt], [newt])
AST_EXT_LIB_SETUP([CURSES], [curses], [curses])
AST_EXT_LIB_SETUP([NCURSES], [ncurses], [ncurses])
AST_EXT_LIB_CHECK([NEWT], [newt], [newtBell], [newt.h])
AST_EXT_LIB_CHECK([CURSES], [curses], [initscr], [curses.h])
AST_EXT_LIB_CHECK([NCURSES], [ncurses], [initscr], [curses.h])
PBX_GTK2=0
AC_CHECK_TOOL(PKGCONFIG, pkg-config, No)
if test ! "x${PKGCONFIG}" = xNo; then
GTK2_INCLUDE=$(${PKGCONFIG} gtk+-2.0 --cflags 2>/dev/null)
GTK2_LIB=$(${PKGCONFIG} gtk+-2.0 --libs)
PBX_GTK2=1
AC_DEFINE([HAVE_GTK2], 1, [Define if your system has the GTK2 libraries.])
fi
AC_SUBST(PBX_GTK2)
AC_SUBST(GTK2_INCLUDE)
AC_SUBST(GTK2_LIB)
test "$silent"=yes && ac_sub_configure_args="${ac_sub_configure_args} --silent"
AC_CONFIG_FILES([makeopts])
AC_CONFIG_SUBDIRS([mxml])
AC_OUTPUT
AC_MSG_NOTICE(Menuselect build configuration successfully completed)

View File

@ -1,17 +0,0 @@
all:
clean:
dist-clean:
makeopts:
menuselect:
./menuselect-dummy
# Generate some dummy files to satifsy dependencies from the main
# Makefile.
dummies:
touch linkedlists.h menuselect.c menuselect_curses.c \
menuselect.h menuselect_stub.c

View File

@ -1,741 +0,0 @@
#!/usr/bin/perl -w
# menuselect - a simple drop-in replacement of the batch-mode menuselect
# included with Asterisk.
#
# Copyright (C) 2008 by Tzafrir Cohen <tzafrir.cohen@xorcom.com>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA
# Installation: copy this script to menuselect/menuselect . Copy the
# included Makefile as menuselect/Makefile and run:
#
# make -C makefile dummies
#
# It takes configuration from build_tools/conf . Sample config file:
#
# By default all modules will be built (except those marked not be
# used by default)
#
# # exclude: Don't try to build the following modules.
# #exclude app_test
#
# # You can have multiple items in each line, and multiple lines.
# # Each item is a perl regular expression that must match the whole
# # module name.
# #exclude res_config_.*
#
# # include: syntax is the same as exclude. Overrides exclude and
# # modules that are marked as disabled by defualt:
# #include res_config_sqlite3 app_skel
#
# # If you want to make sure some modules will be conifgured to build,
# # you can require them. If modules that match any of the 'require'
# # pattern are not configured to build, menuselect will panic.
# # Same pattern rules apply here. Why would you want that? I have no
# # idea.
# #require chan_h323 app_directory
#
# # random - the value for this keyword is a number between 1 and
# # 100. The higher it is, more chances not to include each module.
# # Writes the list of modules that got hit to
# # build_tools/mods_removed_random .
# # Note that unlike 'make randomconfig' and such the random
# # configuration changes each time you run 'make', thus if a build
# # failed you should first read build_tools/mods_removed_random
# # before re-running make.
# #random 10
#
# # Anything after a '#' is ignored, and likewise empty lines.
# # Naturally.
use strict;
use Getopt::Long;
# Holds global dependncy information. Keys are module names.
my %ModInfo = ();
# extract configuration from kernel modules:
my $AutoconfDepsFile = "build_tools/menuselect-deps";
my $AutoconfOptsFile = "makeopts";
my %ConfigureOpts = (); #
# configuration file to read for some directives:
my $ConfFile = "build_tools/conf";
my $DumpFile = 'build_tools/dump_deps';
# Modules removed randomely:
my $RandomeModsFile = "build_tools/mods_removed_random";
my $MakedepsFile = "menuselect.makedeps";
my $MakeoptsFile = "menuselect.makeopts";
# If those modules are not present, the build will fail (PCRE patterns)
my @RequiredModules = ();
my @Subdirs = qw/addons apps bridges cdr cel channels codecs formats funcs main pbx res tests utils/;
my @XmlCategories = 'cflags';
# Modules should not bother building (PCRE patterns)
my @ExcludedModules = ();
# Do try building those. Overrides 'exclude' and 'defaultenable: no'
my @IncludedModules = ();
# A chance to rule-out a module randomely.
my $RandomKnockoutFactor = 0;
sub warning($) {
my $msg = shift;
print STDERR "$0: Warning: $msg\n";
}
# Convert XML syntax to mail-header-like syntax:
# <var>value</var> --> Var: value
sub extract_xml_key($) {
my %attr = ();
my $xml_line = shift;
if ($xml_line !~ m{^\s*<([a-z_A-Z0-9]+)(\s+([^>]*))?>([^<]*)</\1>}) {
warning "parsed empty value from XML line $xml_line";
return ('', ''); # warn?
}
my ($var, $val) = ($1, $4);
$var =~ s{^[a-z]}{\u$&};
if (defined $3) {
my $attr_text = $3;
while ($attr_text =~ /^( *([^=]+)="([^"]+)")/) {
my ($var, $val) = ($2, $3);
$attr_text =~ s/^$1//;
$attr{$var} = $val;
}
}
return ($var, $val, %attr);
}
# Get information embedded in source files from a subdirectory.
# First parameter is the subdirectory and further ones are the actual
# source files.
sub get_subdir_module_info {
my $subdir = shift;
my @files = @_;
my $dir = uc($subdir);
foreach my $src (@files) {
open SRC,$src or die "Can't read from source file $src: $!\n";
$src =~ m|.*/([^/]*)\.c|;
my $mod_name = $1;
my %data = (
Type=>'module',
Module=>$mod_name,
Dir=> $dir,
Avail=>1
);
while (<SRC>) {
next unless (m|^/\*\*\* MODULEINFO| .. m|^ *[*]+/|);
next unless (m|^[A-Z]| || m|^\s*<|);
# At this point we can assume we're in the module
# info section.
chomp;
my ($var, $val, %attr) = extract_xml_key($_);
foreach (keys %attr) {
push @{$data{$_}},($attr{$_});
}
if ($var =~ /^(Depend|Use)$/i) {
# use uppercase for dependency names;
$val = uc($val);
}
if ( ! exists $data{$var} ) {
$data{$var} = [$val];
} else {
push @{$data{$var}},($val);
}
}
close SRC;
$ModInfo{uc($mod_name)} = \%data;
}
}
# extract embedded information in all the source tree.
sub extract_subdirs {
for my $subdir(@_) {
get_subdir_module_info($subdir, <$subdir/*.c> , <$subdir/*.cc>);
}
}
# parse a partial XML document that is included as an input
# for menuselect in a few places. Naturally a full-fledged XML parsing
# will not be done here. A line-based parsing that happens to work will
# have to do.
sub parse_menuselect_xml_file($) {
my $file_name = shift;
open XML,$file_name or
die "Failed opening XML file $file_name: $!.\n";
my $header = <XML>;
$header =~ /^\s*<category\s+name="MENUSELECT_([^"]+)"\s/;
my $category = $1;
my $member;
while(<XML>){
next unless (m{^\s*<(/?[a-z]+)[>\s]});
my $tag = $1;
if ($tag eq 'member') {
if (! m{^\s*<member\s+name="([^"]+)" displayname="([^"]+)"\s*>}){
warning "Bad XML member line: $_ ($file_name:$.)\n";
next;
}
my ($name, $display_name) = ($1, $2);
$member = {
Type => 'XML',
Dir => $category,
Module => $1,
DisplayName => $2,
Defaultenabled => ['no'],
Avail => 1,
};
} elsif ($tag eq '/member') {
$ModInfo{$member->{Module}} = $member;
} elsif ($tag eq '/category') {
last;
} else {
if (! m/^\s*<([a-z]+)>([^<]+)</) {
warning "(1) Unknown XML line $_ ($file_name:$.)\n";
next
}
my ($key, $val) = extract_xml_key($_);
if ($key eq '') {
warning "Unknown XML line $_ ($file_name:$.)\n";
next
}
if (! exists $member->{$key}) {
$member->{$key} = [];
}
# Make sure dependencies are upper-case.
# FIXME: this is not the proper place for such a fix
$val = uc($val) if ($key =~ /Depend|Use/);
# Using "unshift' rather than 'push'.
# For a singleton value this makes the action an
# override, as only the first value counts.
# For a list value, however, it means a reversed
# order.
unshift @{$member->{$key}}, ($val);
}
}
close XML;
}
# Dump our data structure to a file.
sub dump_deps($) {
my $file = shift;
open OUTPUT,">$file" or
die "cannot open category file $file for writing: $!\n";
foreach my $mod_name (sort keys %ModInfo) {
print OUTPUT "Key: $mod_name\n";
my $data = $ModInfo{$mod_name};
foreach my $var (sort keys %{$data} ) {
my $val = $$data{$var};
if (ref($val) eq 'ARRAY') {
print OUTPUT $var.": ". (join ", ", @$val)."\n";
} else {
print OUTPUT "$var: $val\n";
}
}
print OUTPUT "\n";
}
close OUTPUT;
}
# Get the available libraries that autoconf generated.
sub get_autoconf_deps() {
open DEPS, $AutoconfDepsFile or
die "Failed to open $AutoconfDepsFile. Aborting: $!\n";
my @deps_list = (<DEPS>);
foreach (@deps_list){
chomp;
my ($lib, $avail_val) = split(/=/);
my ($avail, $avail_old) = split(/:/, $avail_val);
my $disabled = 0;
if ($avail == -1) {
$disabled = 1;
$avail = 0;
}
$ModInfo{$lib} = {
Type=>'lib', Avail=>$avail, Disabled => $disabled
};
if (defined $avail_old) {
$ModInfo{$lib}{AvailOld} = $avail_old;
}
# FIXME:
if (($avail ne "0") && ($avail ne "1")) {
warning "Library $lib has invalid availability ".
"value <$avail> (check $AutoconfDepsFile).\n";
}
}
close DEPS;
}
# Get the available libraries that autoconf generated.
sub get_autoconf_opts() {
open OPTS, $AutoconfOptsFile or
die "Failed to open $AutoconfOptsFile. Aborting: $!\n";
while (<OPTS>) {
chomp;
next if /^(#|$)/;
my ($var, $val) = split /\s*=\s*/, $_, 2;
$ConfigureOpts{$var} = $val;
}
close OPTS;
if (not exists $ConfigureOpts{AST_DEVMODE}) {
$ConfigureOpts{AST_DEVMODE} = 'no';
}
}
# Read our specific config file.
#
# Its format:
#
# keyword values
#
# values are always a spaces-separated list.
sub read_conf() {
open CONF,$ConfFile or return;
while (<CONF>) {
# remove comments and empty lines:
chomp;
s/#.*$//;
next if /^\s*$/;
my ($keyword, @value) = split;
if ($keyword eq 'exclude') {
push @ExcludedModules, @value;
} elsif ($keyword eq 'include') {
push @IncludedModules, @value;
} elsif ($keyword eq 'require') {
push @RequiredModules, @value;
} elsif ($keyword eq 'random') {
$RandomKnockoutFactor = $value[0] / 100;
} else {
warning "unknown keyword $keyword in line $. of $ConfFile.";
}
}
}
# generate menuselect.makedeps.
# In this file menuselect writes dependecies of each module. CFLAGS will
# then automatically include for each module the _INCLUDE and LDFLAGS
# will include the _LIBS from all the depedencies of the module.
sub gen_makedeps() {
open MAKEDEPSS, ">$MakedepsFile" or
die "Failed to open deps file $MakedepsFile for writing. Aborting: $!\n";
for my $mod_name (sort keys %ModInfo) {
next unless ($ModInfo{$mod_name}{Type} eq 'module');
my $mod = $ModInfo{$mod_name};
my @deps = ();
# if we have Depend or Use, put their values into
# @deps . If we have none, move on.
push @deps, @{$mod->{Depend}} if (exists $mod->{Depend});
push @deps, @{$mod->{Use}} if (exists $mod->{Use});
next unless @deps;
# TODO: don't print dependencies that are not external libs.
# Not done yet until I figure out if this is safe.
my $dep = join(' ', @deps);
print MAKEDEPSS "MENUSELECT_DEPENDS_".$mod->{Module}."=$dep\n";
}
close MAKEDEPSS;
}
# Set modules from patterns specified by 'exclude' in the configuration file
# to exclude modules from building (mark them as unavailable).
sub apply_excluded_patterns() {
foreach my $pattern (@ExcludedModules) {
my @excluded = grep {/^$pattern$/i} (keys %ModInfo);
foreach (@excluded) {
$ModInfo{$_}{Avail} = 0;
}
}
}
# Set modules from patterns specified by 'include' in the configuration
# file to exclude from building (mark them as available).
sub apply_included_patterns() {
foreach my $pattern (@IncludedModules) {
my @included = grep {/^$pattern$/i} (keys %ModInfo);
foreach (@included) {
$ModInfo{$_}{Avail} = 1;
}
}
}
# If user set the "random" config to anything > 0, drop some random
# modules. May help expose wrong dependencies.
sub apply_random_drop() {
return if ($RandomKnockoutFactor <= 0);
open MODS_LIST, ">$RandomeModsFile" or
die "Failed to open modules list file $RandomeModsFile for writing. Aborting: $!\n";
for my $mod (keys %ModInfo) {
next unless ($ModInfo{$mod}{Type} eq 'module');
next unless (rand() < $RandomKnockoutFactor);
$ModInfo{$mod}{Avail} = 0;
$ModInfo{$mod}{RandomKill} = 1;
print MODS_LIST $ModInfo{$mod}{Module}."\n";
}
close MODS_LIST;
}
sub check_required_patterns() {
my @failed = ();
foreach my $pattern (@RequiredModules) {
my @required = grep {/^$pattern$/i} (keys %ModInfo);
foreach my $mod (@required) {
if ((! exists $ModInfo{$mod}{Checked}) ||
(! $ModInfo{$mod}{Checked}) )
{
push @failed, $mod;
}
}
}
return unless (@failed);
my $failed_str = join ' ',@failed;
die("Missing dependencies for the following modules: $failed_str\n");
}
# Disable building for modules that were marked in the embedded module
# information as disabled for building by default.
sub apply_default_enabled() {
foreach my $mod (keys %ModInfo) {
if ((exists $ModInfo{$mod}{Defaultenabled}) &&
$ModInfo{$mod}{Defaultenabled}[0] eq 'no')
{
$ModInfo{$mod}{Avail} = 0;
}
}
}
# We found a dependency we don't know about. Warn the user, and add
# information about it:
sub handle_unknown_dep($$) {
my ($dep_mod, $mod) = @_;
my $mod_info = {
Type => 'Unknown',
Avail => 0,
Checked => 0,
};
$ModInfo{$dep_mod} = $mod_info;
warning "Unknown dependency module $dep_mod (for e.g. $mod)\n";
}
# recursively check dependency for a module.
#
# We run a scan for modules. Modules marked as 'Checked' are ones we
# have already fully verified to have proper dependencies.
#
# We can only use a module or library marked as Avail => 1 (library
# available or module not excluded).
sub check_module($);
sub check_module($) {
my $mod = shift;
# we checked it:
if (exists $ModInfo{$mod}{Checked}) {
return $ModInfo{$mod}{Checked};
}
# A library has no dependencies of its own.
if ($ModInfo{$mod}{Type} eq 'lib') {
return ($ModInfo{$mod}{Avail} || 0);
}
# An excluded module.
if ($ModInfo{$mod}{Avail} == 0) {
return 0;
}
if (! exists $ModInfo{$mod}{Depend}) {
$ModInfo{$mod}{Checked} = 1;
return 1;
}
my $deps_checked = 1; # may be reset below on failures:
if (exists $ModInfo{$mod}{Tested}) {
# this probably means a circular dependency of some sort.
warning "Got to module $mod that is already tested.";
}
$ModInfo{$mod}{Tested} = 1;
foreach my $dep_mod (@{$ModInfo{$mod}{Depend}} ) {
if (!exists ${ModInfo}{$dep_mod}) {
handle_unknown_dep($dep_mod, $mod);
return 0;
}
$deps_checked &= check_module($dep_mod);
last if(!$deps_checked) # no point testing further if we failed.
}
$ModInfo{$mod}{Checked} = $deps_checked;
return $deps_checked;
}
# The main dependency resolver function.
sub resolve_deps() {
apply_default_enabled();
apply_excluded_patterns();
apply_included_patterns();
foreach my $mod (keys %ModInfo) {
check_module($mod);
}
}
# generate menuselect.makeopts.
# The values in this file obey to different semantics:
# 1. For modules, a module will be built unles listed here
# 2. For XML values (sounds, CFLAGS) it will be enabled if listed here
sub gen_makeopts() {
open MAKEDEPS, ">$MakeoptsFile" or
die "Failed to open opts file $MakeoptsFile for writing. Aborting: $!\n";
my %Subdirs;
foreach my $mod (sort keys %ModInfo) {
next unless ($ModInfo{$mod}{Type} =~ /^(module|XML)$/);
if ($ModInfo{$mod}{Type} eq 'XML') {
next unless ($ModInfo{$mod}{Checked});
} else {
next if ($ModInfo{$mod}{Checked});
}
my $dir = $ModInfo{$mod}{Dir};
if (! exists $Subdirs{$dir}) {
$Subdirs{$dir} = [];
}
push @{$Subdirs{$dir}},( $ModInfo{$mod}{Module} );
}
foreach my $dir (sort keys %Subdirs) {
my $deps = join(' ', @{$Subdirs{$dir}});
print MAKEDEPS "MENUSELECT_$dir=$deps\n";
}
close MAKEDEPS;
}
# Main function for --check-deps
sub check_dependencies() {
read_conf();
extract_subdirs(@Subdirs);
get_autoconf_opts();
parse_menuselect_xml_file('build_tools/cflags.xml');
if ($ConfigureOpts{AST_DEVMODE} eq 'yes') {
parse_menuselect_xml_file('build_tools/cflags-devmode.xml');
}
parse_menuselect_xml_file('sounds/sounds.xml');
apply_random_drop();
get_autoconf_deps();
#dump_deps('build_tools/dump_deps_before_resolve');
resolve_deps();
# Handy debugging:
dump_deps($DumpFile);
check_required_patterns();
gen_makedeps();
gen_makeopts();
}
#
# The main program start here
#
sub read_dump() {
my %items = ();
my $saved_rs = $/;
$/ = "\n\n";
open DUMP_FILE,$DumpFile or die "Can't read from dump file $DumpFile\n";
while (<DUMP_FILE>) {
my %item = ();
my @item_lines = split /\n\r?/;
foreach (@item_lines) {
my ($var, $value) = split /: /, $_, 2;
$item{$var} = $value;
}
# FIXME: dependencies are a list. This should not be a
# special case.
if (exists $item{Depend}) {
$item{Depend} = [split /\s*,\s*/,$item{Depend}];
}
$items{$item{Key}} = \%item;
}
close DUMP_FILE;
$/ = $saved_rs;
return \%items;
}
# Explain why a module (read from the dump file) was not enabled.
# (We assume here that $item->{Avail} is 0)
sub fail_reason($) {
my $item = shift;
if ($item->{Type} eq 'lib') {
return " Not found: system library";
} elsif ($item->{Type} eq 'XML') {
if ($item->{Defaultenabled} !~ /^y/) {
return "Not enabled";
} else {
return "Missing dependencies";
}
} elsif ($item->{Type} eq 'module') {
if (exists ($item->{Defaultenabled}) &&
$item->{Defaultenabled} =~ /^n/) {
return "Disabled";
} else {
return "Missing dependencies";
}
}
}
sub item_used($) {
my $item = shift;
my $type = $item->{Type};
return $item->{Avail} if ($type eq 'lib');
return $item->{Checked};
}
sub print_module_status {
my $flag_verbose = shift;
my $items = read_dump();
my %items_matched = ();
foreach my $pattern (@_) {
foreach (keys %$items) {
if (/$pattern/i) {
$items_matched{$_} = 1;
}
}
}
my @items_list = sort keys %items_matched;
foreach my $item_name (@items_list) {
my $item = $items->{$item_name};
if ($flag_verbose) {
printf "%s %-8s %-30s\n",
(item_used($item)? 'Y':'n'),
$item->{Type},
$item->{Key};
if (!$item->{Avail}) {
my $reason = fail_reason($item);
print " $reason\n";
}
foreach (@{$item->{Depend}}) {
my $depmod = $items->{$_};
printf(" * %-12s ",$_);
print (item_used($depmod)? '': "un");
print "available\n";
}
} else {
printf "%s %-8s %-30s",
(item_used($item)? 'Y':'n'),
$item->{Type},
$item->{Key};
foreach (@{$item->{Depend}}) {
my $depmod = $items->{$_};
if (item_used($depmod)) {
print "$_ ";
} else {
printf "[%s] ", $_;
}
}
print "\n";
}
}
}
sub usage() {
print "$0: menuselect reimplementation\n";
print "\n";
print "Usage:\n";
print "$0 # menuselect processing\n";
print "$0 -m|--modinfo|--moduls-info PATTERN # Status of modules\n";
print "$0 -v|--verbose # verbose (modinfo)\n";
print "$0 -c|--check-deps # Check for dependencies\n";
print "\n";
print "PATTERN is a partial perl regex. Use '-m .' to list all.\n";
}
my @module_status = ();
my $flag_verbose = 0;
my $action = '';
my $rc = GetOptions(
'modinfo|modules-info|m=s' => \@module_status,
'verbose|v' => \$flag_verbose,
'check-deps|c:s' => sub { $action = 'check_dependencies'},
'help|h' => sub { usage(); exit 0 },
);
if (!$rc) {
usage();
exit $rc;
}
if (@module_status) {
$action = 'module_status';
}
if ($action eq 'module_status') {
print_module_status($flag_verbose, @module_status);
exit 0;
} elsif ( $action eq 'check_dependencies') {
check_dependencies();
} else {
usage(); exit(1);
}

View File

@ -1,487 +0,0 @@
<?xml version=1.0?>
<menu name="Asterisk Module Selection">
<category name="MENUSELECT_APPS" displayname="Applications">
<member name="app_adsiprog" displayname="Asterisk ADSI Programming Application" remove_on_change="apps/app_adsiprog.o apps/app_adsiprog.so">
</member>
<member name="app_alarmreceiver" displayname="Alarm Receiver for Asterisk" remove_on_change="apps/app_alarmreceiver.o apps/app_alarmreceiver.so">
</member>
<member name="app_amd" displayname="Answering Machine Detection Application" remove_on_change="apps/app_amd.o apps/app_amd.so">
</member>
<member name="app_authenticate" displayname="Authentication Application" remove_on_change="apps/app_authenticate.o apps/app_authenticate.so">
</member>
<member name="app_cdr" displayname="Tell Asterisk to not maintain a CDR for the current call" remove_on_change="apps/app_cdr.o apps/app_cdr.so">
</member>
<member name="app_chanisavail" displayname="Check channel availability" remove_on_change="apps/app_chanisavail.o apps/app_chanisavail.so">
</member>
<member name="app_channelredirect" displayname="Channel Redirect" remove_on_change="apps/app_channelredirect.o apps/app_channelredirect.so">
</member>
<member name="app_chanspy" displayname="Listen to the audio of an active channel" remove_on_change="apps/app_chanspy.o apps/app_chanspy.so">
</member>
<member name="app_controlplayback" displayname="Control Playback Application" remove_on_change="apps/app_controlplayback.o apps/app_controlplayback.so">
</member>
<member name="app_db" displayname="Database Access Functions" remove_on_change="apps/app_db.o apps/app_db.so">
</member>
<member name="app_dial" displayname="Dialing Application" remove_on_change="apps/app_dial.o apps/app_dial.so">
</member>
<member name="app_dictate" displayname="Virtual Dictation Machine" remove_on_change="apps/app_dictate.o apps/app_dictate.so">
</member>
<member name="app_directed_pickup" displayname="Directed Call Pickup Application" remove_on_change="apps/app_directed_pickup.o apps/app_directed_pickup.so">
</member>
<member name="app_directory" displayname="Extension Directory" remove_on_change="apps/app_directory.o apps/app_directory.so">
</member>
<member name="app_disa" displayname="DISA (Direct Inward System Access) Application" remove_on_change="apps/app_disa.o apps/app_disa.so">
</member>
<member name="app_dumpchan" displayname="Dump Info About The Calling Channel" remove_on_change="apps/app_dumpchan.o apps/app_dumpchan.so">
</member>
<member name="app_echo" displayname="Simple Echo Application" remove_on_change="apps/app_echo.o apps/app_echo.so">
</member>
<member name="app_exec" displayname="Executes dialplan applications" remove_on_change="apps/app_exec.o apps/app_exec.so">
</member>
<member name="app_externalivr" displayname="External IVR Interface Application" remove_on_change="apps/app_externalivr.o apps/app_externalivr.so">
</member>
<member name="app_festival" displayname="Simple Festival Interface" remove_on_change="apps/app_festival.o apps/app_festival.so">
</member>
<member name="app_flash" displayname="Flash zap trunk application" remove_on_change="apps/app_flash.o apps/app_flash.so">
<depend>zaptel</depend>
</member>
<member name="app_followme" displayname="Find-Me/Follow-Me Application" remove_on_change="apps/app_followme.o apps/app_followme.so">
</member>
<member name="app_forkcdr" displayname="Fork The CDR into 2 separate entities." remove_on_change="apps/app_forkcdr.o apps/app_forkcdr.so">
</member>
<member name="app_getcpeid" displayname="Get ADSI CPE ID" remove_on_change="apps/app_getcpeid.o apps/app_getcpeid.so">
</member>
<member name="app_hasnewvoicemail" displayname="Indicator for whether a voice mailbox has messages in a given folder." remove_on_change="apps/app_hasnewvoicemail.o apps/app_hasnewvoicemail.so">
</member>
<member name="app_ices" displayname="Encode and Stream via icecast and ices" remove_on_change="apps/app_ices.o apps/app_ices.so">
</member>
<member name="app_image" displayname="Image Transmission Application" remove_on_change="apps/app_image.o apps/app_image.so">
</member>
<member name="app_ivrdemo" displayname="IVR Demo Application" remove_on_change="apps/app_ivrdemo.o apps/app_ivrdemo.so">
<defaultenabled>no</defaultenabled>
</member>
<member name="app_lookupblacklist" displayname="Look up Caller*ID name/number from blacklist database" remove_on_change="apps/app_lookupblacklist.o apps/app_lookupblacklist.so">
</member>
<member name="app_lookupcidname" displayname="Look up CallerID Name from local database" remove_on_change="apps/app_lookupcidname.o apps/app_lookupcidname.so">
</member>
<member name="app_macro" displayname="Extension Macros" remove_on_change="apps/app_macro.o apps/app_macro.so">
</member>
<member name="app_meetme" displayname="MeetMe conference bridge" remove_on_change="apps/app_meetme.o apps/app_meetme.so">
<depend>zaptel</depend>
</member>
<member name="app_milliwatt" displayname="Digital Milliwatt (mu-law) Test Application" remove_on_change="apps/app_milliwatt.o apps/app_milliwatt.so">
</member>
<member name="app_mixmonitor" displayname="Mixed Audio Monitoring Application" remove_on_change="apps/app_mixmonitor.o apps/app_mixmonitor.so">
</member>
<member name="app_morsecode" displayname="Morse code" remove_on_change="apps/app_morsecode.o apps/app_morsecode.so">
</member>
<member name="app_mp3" displayname="Silly MP3 Application" remove_on_change="apps/app_mp3.o apps/app_mp3.so">
</member>
<member name="app_nbscat" displayname="Silly NBS Stream Application" remove_on_change="apps/app_nbscat.o apps/app_nbscat.so">
</member>
<member name="app_osplookup" displayname="Open Settlement Protocol Applications" remove_on_change="apps/app_osplookup.o apps/app_osplookup.so">
<depend>libosptk</depend>
<depend>ssl</depend>
</member>
<member name="app_page" displayname="Page Multiple Phones" remove_on_change="apps/app_page.o apps/app_page.so">
<depend>zaptel</depend>
</member>
<member name="app_parkandannounce" displayname="Call Parking and Announce Application" remove_on_change="apps/app_parkandannounce.o apps/app_parkandannounce.so">
</member>
<member name="app_playback" displayname="Sound File Playback Application" remove_on_change="apps/app_playback.o apps/app_playback.so">
</member>
<member name="app_privacy" displayname="Require phone number to be entered, if no CallerID sent" remove_on_change="apps/app_privacy.o apps/app_privacy.so">
</member>
<member name="app_queue" displayname="True Call Queueing" remove_on_change="apps/app_queue.o apps/app_queue.so">
</member>
<member name="app_random" displayname="Random goto" remove_on_change="apps/app_random.o apps/app_random.so">
</member>
<member name="app_read" displayname="Read Variable Application" remove_on_change="apps/app_read.o apps/app_read.so">
</member>
<member name="app_readfile" displayname="Stores output of file into a variable" remove_on_change="apps/app_readfile.o apps/app_readfile.so">
</member>
<member name="app_realtime" displayname="Realtime Data Lookup/Rewrite" remove_on_change="apps/app_realtime.o apps/app_realtime.so">
</member>
<member name="app_record" displayname="Trivial Record Application" remove_on_change="apps/app_record.o apps/app_record.so">
</member>
<member name="app_rpt" displayname="Radio Repeater / Remote Base version 0.48 06/13/2006" remove_on_change="apps/app_rpt.o apps/app_rpt.so">
<depend>zaptel</depend>
<defaultenabled>no</defaultenabled>
</member>
<member name="app_sayunixtime" displayname="Say time" remove_on_change="apps/app_sayunixtime.o apps/app_sayunixtime.so">
</member>
<member name="app_senddtmf" displayname="Send DTMF digits Application" remove_on_change="apps/app_senddtmf.o apps/app_senddtmf.so">
</member>
<member name="app_sendtext" displayname="Send Text Applications" remove_on_change="apps/app_sendtext.o apps/app_sendtext.so">
</member>
<member name="app_setcallerid" displayname="Set CallerID Application" remove_on_change="apps/app_setcallerid.o apps/app_setcallerid.so">
</member>
<member name="app_setcdruserfield" displayname="CDR user field apps" remove_on_change="apps/app_setcdruserfield.o apps/app_setcdruserfield.so">
</member>
<member name="app_settransfercapability" displayname="Set ISDN Transfer Capability" remove_on_change="apps/app_settransfercapability.o apps/app_settransfercapability.so">
</member>
<member name="app_skel" displayname="Trivial skeleton Application" remove_on_change="apps/app_skel.o apps/app_skel.so">
<defaultenabled>no</defaultenabled>
</member>
<member name="app_sms" displayname="SMS/PSTN handler" remove_on_change="apps/app_sms.o apps/app_sms.so">
</member>
<member name="app_softhangup" displayname="Hangs up the requested channel" remove_on_change="apps/app_softhangup.o apps/app_softhangup.so">
</member>
<member name="app_speech_utils" displayname="Dialplan Speech Applications" remove_on_change="apps/app_speech_utils.o apps/app_speech_utils.so">
</member>
<member name="app_stack" displayname="Stack Routines" remove_on_change="apps/app_stack.o apps/app_stack.so">
</member>
<member name="app_system" displayname="Generic System() application" remove_on_change="apps/app_system.o apps/app_system.so">
</member>
<member name="app_talkdetect" displayname="Playback with Talk Detection" remove_on_change="apps/app_talkdetect.o apps/app_talkdetect.so">
</member>
<member name="app_test" displayname="Interface Test Application" remove_on_change="apps/app_test.o apps/app_test.so">
</member>
<member name="app_transfer" displayname="Transfer" remove_on_change="apps/app_transfer.o apps/app_transfer.so">
</member>
<member name="app_url" displayname="Send URL Applications" remove_on_change="apps/app_url.o apps/app_url.so">
</member>
<member name="app_userevent" displayname="Custom User Event Application" remove_on_change="apps/app_userevent.o apps/app_userevent.so">
</member>
<member name="app_verbose" displayname="Send verbose output" remove_on_change="apps/app_verbose.o apps/app_verbose.so">
</member>
<member name="app_voicemail" displayname="Comedian Mail (Voicemail System)" remove_on_change="apps/app_voicemail.o apps/app_voicemail.so">
</member>
<member name="app_waitforring" displayname="Waits until first ring after time" remove_on_change="apps/app_waitforring.o apps/app_waitforring.so">
</member>
<member name="app_waitforsilence" displayname="Wait For Silence" remove_on_change="apps/app_waitforsilence.o apps/app_waitforsilence.so">
</member>
<member name="app_while" displayname="While Loops and Conditional Execution" remove_on_change="apps/app_while.o apps/app_while.so">
</member>
<member name="app_zapateller" displayname="Block Telemarketers with Special Information Tone" remove_on_change="apps/app_zapateller.o apps/app_zapateller.so">
</member>
<member name="app_zapbarge" displayname="Barge in on Zap channel application" remove_on_change="apps/app_zapbarge.o apps/app_zapbarge.so">
<depend>zaptel</depend>
</member>
<member name="app_zapras" displayname="Zap RAS Application" remove_on_change="apps/app_zapras.o apps/app_zapras.so">
<depend>zaptel</depend>
</member>
<member name="app_zapscan" displayname="Scan Zap channels application" remove_on_change="apps/app_zapscan.o apps/app_zapscan.so">
<depend>zaptel</depend>
</member>
</category>
<category name="MENUSELECT_CDR" displayname="Call Detail Recording">
<member name="cdr_csv" displayname="Comma Separated Values CDR Backend" remove_on_change="cdr/cdr_csv.o cdr/cdr_csv.so">
</member>
<member name="cdr_custom" displayname="Customizable Comma Separated Values CDR Backend" remove_on_change="cdr/cdr_custom.o cdr/cdr_custom.so">
</member>
<member name="cdr_manager" displayname="Asterisk Call Manager CDR Backend" remove_on_change="cdr/cdr_manager.o cdr/cdr_manager.so">
</member>
<member name="cdr_odbc" displayname="ODBC CDR Backend" remove_on_change="cdr/cdr_odbc.o cdr/cdr_odbc.so">
<depend>unixodbc</depend>
</member>
<member name="cdr_pgsql" displayname="PostgreSQL CDR Backend" remove_on_change="cdr/cdr_pgsql.o cdr/cdr_pgsql.so">
<depend>pgsql</depend>
</member>
<member name="cdr_radius" displayname="RADIUS CDR Backend" remove_on_change="cdr/cdr_radius.o cdr/cdr_radius.so">
<depend>radiusclient</depend>
</member>
<member name="cdr_sqlite" displayname="SQLite CDR Backend" remove_on_change="cdr/cdr_sqlite.o cdr/cdr_sqlite.so">
<depend>sqlite</depend>
</member>
<member name="cdr_tds" displayname="MSSQL CDR Backend" remove_on_change="cdr/cdr_tds.o cdr/cdr_tds.so">
<depend>freetds</depend>
</member>
</category>
<category name="MENUSELECT_CHANNELS" displayname="Channel Drivers">
<member name="chan_agent" displayname="Agent Proxy Channel" remove_on_change="channels/chan_agent.o channels/chan_agent.so">
</member>
<member name="chan_alsa" displayname="ALSA Console Channel Driver" remove_on_change="channels/chan_alsa.o channels/chan_alsa.so">
<depend>asound</depend>
</member>
<member name="chan_features" displayname="Feature Proxy Channel" remove_on_change="channels/chan_features.o channels/chan_features.so">
</member>
<member name="chan_h323" displayname="The NuFone Network's Open H.323 Channel Driver" remove_on_change="channels/chan_h323.o channels/chan_h323.so">
<depend>h323</depend>
</member>
<member name="chan_iax2" displayname="Inter Asterisk eXchange (Ver 2)" remove_on_change="channels/chan_iax2.o channels/chan_iax2.so">
</member>
<member name="chan_jingle" displayname="Jingle Channel Driver" remove_on_change="channels/chan_jingle.o channels/chan_jingle.so">
<depend>iksemel</depend>
</member>
<member name="chan_local" displayname="Local Proxy Channel" remove_on_change="channels/chan_local.o channels/chan_local.so">
</member>
<member name="chan_mgcp" displayname="Media Gateway Control Protocol (MGCP)" remove_on_change="channels/chan_mgcp.o channels/chan_mgcp.so">
</member>
<member name="chan_misdn" displayname="Channel driver for mISDN Support (Bri/Pri)" remove_on_change="channels/chan_misdn.o channels/chan_misdn.so">
</member>
<member name="chan_nbs" displayname="Network Broadcast Sound Driver" remove_on_change="channels/chan_nbs.o channels/chan_nbs.so">
<depend>nbs</depend>
</member>
<member name="chan_oss" displayname="OSS Console Channel Driver" remove_on_change="channels/chan_oss.o channels/chan_oss.so">
<depend>ossaudio</depend>
</member>
<member name="chan_phone" displayname="Standard Linux Telephony API Driver" remove_on_change="channels/chan_phone.o channels/chan_phone.so">
<depend>ixjuser</depend>
</member>
<member name="chan_sip" displayname="Session Initiation Protocol (SIP)" remove_on_change="channels/chan_sip.o channels/chan_sip.so">
</member>
<member name="chan_skinny" displayname="Skinny Client Control Protocol (Skinny)" remove_on_change="channels/chan_skinny.o channels/chan_skinny.so">
</member>
<member name="chan_vpb" displayname="Standard VoiceTronix API Driver" remove_on_change="channels/chan_vpb.o channels/chan_vpb.so">
<depend>vpbapi</depend>
</member>
<member name="chan_zap" displayname="Zapata Telephony" remove_on_change="channels/chan_zap.o channels/chan_zap.so">
<depend>zaptel</depend>
</member>
</category>
<category name="MENUSELECT_CODECS" displayname="Codec Translators">
<member name="codec_a_mu" displayname="A-law and Mulaw direct Coder/Decoder" remove_on_change="codecs/codec_a_mu.o codecs/codec_a_mu.so">
</member>
<member name="codec_adpcm" displayname="Adaptive Differential PCM Coder/Decoder" remove_on_change="codecs/codec_adpcm.o codecs/codec_adpcm.so">
</member>
<member name="codec_alaw" displayname="A-law Coder/Decoder" remove_on_change="codecs/codec_alaw.o codecs/codec_alaw.so">
</member>
<member name="codec_g723_1" displayname="" remove_on_change="codecs/codec_g723_1.o codecs/codec_g723_1.so">
<defaultenabled>no</defaultenabled>
</member>
<member name="codec_g726" displayname="ITU G.726-32kbps G726 Transcoder" remove_on_change="codecs/codec_g726.o codecs/codec_g726.so">
</member>
<member name="codec_gsm" displayname="GSM/PCM16 (signed linear) Codec Translator" remove_on_change="codecs/codec_gsm.o codecs/codec_gsm.so">
<depend>libgsm</depend>
</member>
<member name="codec_ilbc" displayname="iLBC/PCM16 (signed linear) Codec Translator" remove_on_change="codecs/codec_ilbc.o codecs/codec_ilbc.so">
</member>
<member name="codec_lpc10" displayname="LPC10 2.4kbps (signed linear) Voice Coder" remove_on_change="codecs/codec_lpc10.o codecs/codec_lpc10.so">
</member>
<member name="codec_speex" displayname="Speex/PCM16 (signed linear) Codec Translator" remove_on_change="codecs/codec_speex.o codecs/codec_speex.so">
<depend>libspeex</depend>
</member>
<member name="codec_ulaw" displayname="Mu-law Coder/Decoder" remove_on_change="codecs/codec_ulaw.o codecs/codec_ulaw.so">
</member>
<member name="codec_zap" displayname="Generic Zaptel Transcoder Codec Translator" remove_on_change="codecs/codec_zap.o codecs/codec_zap.so">
<depend>zaptel</depend>
</member>
</category>
<category name="MENUSELECT_FORMATS" displayname="Format Interpreters">
<member name="format_g723" displayname="G.723.1 Simple Timestamp File Format" remove_on_change="formats/format_g723.o formats/format_g723.so">
</member>
<member name="format_g726" displayname="Raw G.726 (16/24/32/40kbps) data" remove_on_change="formats/format_g726.o formats/format_g726.so">
</member>
<member name="format_g729" displayname="Raw G729 data" remove_on_change="formats/format_g729.o formats/format_g729.so">
</member>
<member name="format_gsm" displayname="Raw GSM data" remove_on_change="formats/format_gsm.o formats/format_gsm.so">
</member>
<member name="format_h263" displayname="Raw h263 data" remove_on_change="formats/format_h263.o formats/format_h263.so">
</member>
<member name="format_h264" displayname="Raw h264 data" remove_on_change="formats/format_h264.o formats/format_h264.so">
</member>
<member name="format_ilbc" displayname="Raw iLBC data" remove_on_change="formats/format_ilbc.o formats/format_ilbc.so">
</member>
<member name="format_jpeg" displayname="JPEG (Joint Picture Experts Group) Image Format" remove_on_change="formats/format_jpeg.o formats/format_jpeg.so">
</member>
<member name="format_ogg_vorbis" displayname="OGG/Vorbis audio" remove_on_change="formats/format_ogg_vorbis.o formats/format_ogg_vorbis.so">
<depend>libvorbis</depend>
<depend>ogg</depend>
</member>
<member name="format_pcm" displayname="Raw/Sun uLaw/ALaw 8khz Audio support (PCM,PCMA,AU)" remove_on_change="formats/format_pcm.o formats/format_pcm.so">
</member>
<member name="format_sln" displayname="Raw Signed Linear Audio support (SLN)" remove_on_change="formats/format_sln.o formats/format_sln.so">
</member>
<member name="format_vox" displayname="Dialogic VOX (ADPCM) File Format" remove_on_change="formats/format_vox.o formats/format_vox.so">
</member>
<member name="format_wav" displayname="Microsoft WAV format (8000hz Signed Linear)" remove_on_change="formats/format_wav.o formats/format_wav.so">
</member>
<member name="format_wav_gsm" displayname="Microsoft WAV format (Proprietary GSM)" remove_on_change="formats/format_wav_gsm.o formats/format_wav_gsm.so">
</member>
</category>
<category name="MENUSELECT_FUNCS" displayname="Dialplan Functions">
<member name="func_base64" displayname="base64 encode/decode dialplan functions" remove_on_change="funcs/func_base64.o funcs/func_base64.so">
</member>
<member name="func_callerid" displayname="Caller ID related dialplan function" remove_on_change="funcs/func_callerid.o funcs/func_callerid.so">
</member>
<member name="func_cdr" displayname="CDR dialplan function" remove_on_change="funcs/func_cdr.o funcs/func_cdr.so">
</member>
<member name="func_channel" displayname="Channel information dialplan function" remove_on_change="funcs/func_channel.o funcs/func_channel.so">
</member>
<member name="func_curl" displayname="Load external URL" remove_on_change="funcs/func_curl.o funcs/func_curl.so">
<depend>curl</depend>
</member>
<member name="func_cut" displayname="Cut out information from a string" remove_on_change="funcs/func_cut.o funcs/func_cut.so">
</member>
<member name="func_db" displayname="Database (astdb) related dialplan functions" remove_on_change="funcs/func_db.o funcs/func_db.so">
</member>
<member name="func_enum" displayname="ENUM related dialplan functions" remove_on_change="funcs/func_enum.o funcs/func_enum.so">
</member>
<member name="func_env" displayname="Environment/filesystem dialplan functions" remove_on_change="funcs/func_env.o funcs/func_env.so">
</member>
<member name="func_global" displayname="Global variable dialplan functions" remove_on_change="funcs/func_global.o funcs/func_global.so">
</member>
<member name="func_groupcount" displayname="Channel group dialplan functions" remove_on_change="funcs/func_groupcount.o funcs/func_groupcount.so">
</member>
<member name="func_language" displayname="Channel language dialplan function" remove_on_change="funcs/func_language.o funcs/func_language.so">
</member>
<member name="func_logic" displayname="Logical dialplan functions" remove_on_change="funcs/func_logic.o funcs/func_logic.so">
</member>
<member name="func_math" displayname="Mathematical dialplan function" remove_on_change="funcs/func_math.o funcs/func_math.so">
</member>
<member name="func_md5" displayname="MD5 digest dialplan functions" remove_on_change="funcs/func_md5.o funcs/func_md5.so">
</member>
<member name="func_moh" displayname="Music-on-hold dialplan function" remove_on_change="funcs/func_moh.o funcs/func_moh.so">
</member>
<member name="func_odbc" displayname="ODBC lookups" remove_on_change="funcs/func_odbc.o funcs/func_odbc.so">
<depend>unixodbc</depend>
</member>
<member name="func_rand" displayname="Random number dialplan function" remove_on_change="funcs/func_rand.o funcs/func_rand.so">
</member>
<member name="func_realtime" displayname="Read/Write values from a RealTime repository" remove_on_change="funcs/func_realtime.o funcs/func_realtime.so">
</member>
<member name="func_sha1" displayname="SHA-1 computation dialplan function" remove_on_change="funcs/func_sha1.o funcs/func_sha1.so">
</member>
<member name="func_strings" displayname="String handling dialplan functions" remove_on_change="funcs/func_strings.o funcs/func_strings.so">
</member>
<member name="func_timeout" displayname="Channel timeout dialplan functions" remove_on_change="funcs/func_timeout.o funcs/func_timeout.so">
</member>
<member name="func_uri" displayname="URI encode/decode dialplan functions" remove_on_change="funcs/func_uri.o funcs/func_uri.so">
</member>
</category>
<category name="MENUSELECT_PBX" displayname="PBX Modules">
<member name="pbx_ael" displayname="Asterisk Extension Language Compiler v2" remove_on_change="pbx/pbx_ael.o pbx/pbx_ael.so">
</member>
<member name="pbx_config" displayname="Text Extension Configuration" remove_on_change="pbx/pbx_config.o pbx/pbx_config.so">
</member>
<member name="pbx_dundi" displayname="Distributed Universal Number Discovery (DUNDi)" remove_on_change="pbx/pbx_dundi.o pbx/pbx_dundi.so">
<depend>zlib</depend>
</member>
<member name="pbx_gtkconsole" displayname="Asterisk PBX Console (GTK Version)" remove_on_change="pbx/pbx_gtkconsole.o pbx/pbx_gtkconsole.so">
<depend>gtk</depend>
<defaultenabled>no</defaultenabled>
</member>
<member name="pbx_loopback" displayname="Loopback Switch" remove_on_change="pbx/pbx_loopback.o pbx/pbx_loopback.so">
</member>
<member name="pbx_realtime" displayname="Realtime Switch" remove_on_change="pbx/pbx_realtime.o pbx/pbx_realtime.so">
</member>
<member name="pbx_spool" displayname="Outgoing Spool Support" remove_on_change="pbx/pbx_spool.o pbx/pbx_spool.so">
</member>
</category>
<category name="MENUSELECT_RES" displayname="Resource Modules">
<member name="res_adsi" displayname="ADSI Resource" remove_on_change="res/res_adsi.o res/res_adsi.so">
</member>
<member name="res_agi" displayname="Asterisk Gateway Interface (AGI)" remove_on_change="res/res_agi.o res/res_agi.so">
</member>
<member name="res_clioriginate" displayname="Call origination from the CLI" remove_on_change="res/res_clioriginate.o res/res_clioriginate.so">
</member>
<member name="res_config_odbc" displayname="ODBC Configuration" remove_on_change="res/res_config_odbc.o res/res_config_odbc.so">
<depend>unixodbc</depend>
</member>
<member name="res_config_pgsql" displayname="Postgresql RealTime Configuration Driver" remove_on_change="res/res_config_pgsql.o res/res_config_pgsql.so">
<depend>pgsql</depend>
</member>
<member name="res_convert" displayname="File format conversion CLI command" remove_on_change="res/res_convert.o res/res_convert.so">
</member>
<member name="res_crypto" displayname="Cryptographic Digital Signatures" remove_on_change="res/res_crypto.o res/res_crypto.so">
<depend>ssl</depend>
</member>
<member name="res_features" displayname="Call Features Resource" remove_on_change="res/res_features.o res/res_features.so">
</member>
<member name="res_indications" displayname="Indications Configuration" remove_on_change="res/res_indications.o res/res_indications.so">
</member>
<member name="res_jabber" displayname="AJI - Asterisk JABBER Interface" remove_on_change="res/res_jabber.o res/res_jabber.so">
<depend>iksemel</depend>
</member>
<member name="res_monitor" displayname="Call Monitoring Resource" remove_on_change="res/res_monitor.o res/res_monitor.so">
</member>
<member name="res_musiconhold" displayname="Music On Hold Resource" remove_on_change="res/res_musiconhold.o res/res_musiconhold.so">
<conflict>win32</conflict>
</member>
<member name="res_odbc" displayname="ODBC Resource" remove_on_change="res/res_odbc.o res/res_odbc.so">
<depend>unixodbc</depend>
</member>
<member name="res_osp" displayname="Open Settlement Protocol Support" remove_on_change="res/res_osp.o res/res_osp.so">
<depend>libosptk</depend>
<depend>ssl</depend>
</member>
<member name="res_smdi" displayname="Asterisk Simplified Message Desk Interface (SMDI) Module" remove_on_change="res/res_smdi.o res/res_smdi.so">
</member>
<member name="res_snmp" displayname="SNMP [Sub]Agent for Asterisk" remove_on_change="res/res_snmp.o res/res_snmp.so">
<depend>netsnmp</depend>
<defaultenabled>no</defaultenabled>
</member>
<member name="res_speech" displayname="Generic Speech Recognition API" remove_on_change="res/res_speech.o res/res_speech.so">
</member>
</category>
<category name="MENUSELECT_CFLAGS" displayname="Compiler Flags" positive_output="yes" remove_on_change=".lastclean">
<member name="DEBUG_CHANNEL_LOCKS" displayname="Debug Channel Locking">
</member>
<member name="DEBUG_SCHEDULER" displayname="Enable Scheduler Debugging Output">
</member>
<member name="DEBUG_THREADS" displayname="Enable Thread Debugging">
</member>
<member name="DETECT_DEADLOCKS" displayname="Detect Deadlocks">
</member>
<member name="DONT_OPTIMIZE" displayname="Disable Optimizations from the Compiler">
</member>
<member name="DUMP_SCHEDULER" displayname="Dump Scheduler Contents for Debugging">
</member>
<member name="LOW_MEMORY" displayname="Optimize for Low Memory Usage">
</member>
<member name="MALLOC_DEBUG" displayname="Keep Track of Memory Allocations">
</member>
<member name="MTX_PROFILE" displayname="Enable Code Profiling Using TSC Counters">
</member>
<member name="RADIO_RELAX" displayname="Relax DTMF for Radio Applications">
</member>
<member name="TRACE_FRAMES" displayname="Trace Frame Allocations">
</member>
</category>
<category name="MENUSELECT_CORE_SOUNDS" displayname="Core Sound Packages" positive_output="yes">
<member name="CORE-SOUNDS-EN-WAV" displayname="English, WAV format">
</member>
<member name="CORE-SOUNDS-EN-ULAW" displayname="English, mu-Law format">
</member>
<member name="CORE-SOUNDS-EN-ALAW" displayname="English, a-Law format">
</member>
<member name="CORE-SOUNDS-EN-GSM" displayname="English, GSM format" >
<defaultenabled>yes</defaultenabled>
</member>
<member name="CORE-SOUNDS-EN-G729" displayname="English, G.729 format">
</member>
<member name="CORE-SOUNDS-ES-WAV" displayname="Spanish, WAV format">
</member>
<member name="CORE-SOUNDS-ES-ULAW" displayname="Spanish, mu-Law format">
</member>
<member name="CORE-SOUNDS-ES-ALAW" displayname="Spanish, a-Law format">
</member>
<member name="CORE-SOUNDS-ES-GSM" displayname="Spanish, GSM format">
</member>
<member name="CORE-SOUNDS-ES-G729" displayname="Spanish, G.729 format">
</member>
<member name="CORE-SOUNDS-FR-WAV" displayname="French, WAV format">
</member>
<member name="CORE-SOUNDS-FR-ULAW" displayname="French, mu-Law format">
</member>
<member name="CORE-SOUNDS-FR-ALAW" displayname="French, a-Law format">
</member>
<member name="CORE-SOUNDS-FR-GSM" displayname="French, GSM format">
</member>
<member name="CORE-SOUNDS-FR-G729" displayname="French, G.729 format">
</member>
</category>
<category name="MENUSELECT_EXTRA_SOUNDS" displayname="Extras Sound Packages" positive_output="yes">
<member name="EXTRA-SOUNDS-EN-WAV" displayname="English, WAV format">
</member>
<member name="EXTRA-SOUNDS-EN-ULAW" displayname="English, mu-Law format">
</member>
<member name="EXTRA-SOUNDS-EN-ALAW" displayname="English, a-Law format">
</member>
<member name="EXTRA-SOUNDS-EN-GSM" displayname="English, GSM format" >
</member>
<member name="EXTRA-SOUNDS-EN-G729" displayname="English, G.729 format">
</member>
</category>
<category name="MENUSELECT_app_voicemail" displayname="Voicemail Build Options" positive_output="yes" remove_on_change="apps/app_voicemail.o">
<member name="ODBC_STORAGE" displayname="Storage of Voicemail using ODBC">
<depend>unixodbc</depend>
<defaultenabled>no</defaultenabled>
</member>
<member name="EXTENDED_ODBC_STORAGE" displayname="Storage of Voicemail using ODBC (extended)">
<depend>unixodbc</depend>
<defaultenabled>no</defaultenabled>
</member>
</category>
</menu>

View File

@ -1,323 +0,0 @@
#!/bin/sh
# install - install a program, script, or datafile
scriptversion=2005-05-14.22
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
chmodcmd="$chmodprog 0755"
chowncmd=
chgrpcmd=
stripcmd=
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=
dst=
dir_arg=
dstarg=
no_target_directory=
usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
In the 1st form, copy SRCFILE to DSTFILE.
In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.
Options:
-c (ignored)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
--help display this help and exit.
--version display version info and exit.
Environment variables override the default commands:
CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
"
while test -n "$1"; do
case $1 in
-c) shift
continue;;
-d) dir_arg=true
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
--help) echo "$usage"; exit $?;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-s) stripcmd=$stripprog
shift
continue;;
-t) dstarg=$2
shift
shift
continue;;
-T) no_target_directory=true
shift
continue;;
--version) echo "$0 $scriptversion"; exit $?;;
*) # When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
test -n "$dir_arg$dstarg" && break
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
if test -n "$dstarg"; then
# $@ is not empty: it contains at least $arg.
set fnord "$@" "$dstarg"
shift # fnord
fi
shift # arg
dstarg=$arg
done
break;;
esac
done
if test -z "$1"; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
fi
# It's OK to call `install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
for src
do
# Protect names starting with `-'.
case $src in
-*) src=./$src ;;
esac
if test -n "$dir_arg"; then
dst=$src
src=
if test -d "$dst"; then
mkdircmd=:
chmodcmd=
else
mkdircmd=$mkdirprog
fi
else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if test ! -f "$src" && test ! -d "$src"; then
echo "$0: $src does not exist." >&2
exit 1
fi
if test -z "$dstarg"; then
echo "$0: no destination specified." >&2
exit 1
fi
dst=$dstarg
# Protect names starting with `-'.
case $dst in
-*) dst=./$dst ;;
esac
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
if test -n "$no_target_directory"; then
echo "$0: $dstarg: Is a directory" >&2
exit 1
fi
dst=$dst/`basename "$src"`
fi
fi
# This sed command emulates the dirname command.
dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# Skip lots of stat calls in the usual case.
if test ! -d "$dstdir"; then
defaultIFS='
'
IFS="${IFS-$defaultIFS}"
oIFS=$IFS
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
shift
IFS=$oIFS
pathcomp=
while test $# -ne 0 ; do
pathcomp=$pathcomp$1
shift
if test ! -d "$pathcomp"; then
$mkdirprog "$pathcomp"
# mkdir can fail with a `File exist' error in case several
# install-sh are creating the directory concurrently. This
# is OK.
test -d "$pathcomp" || exit
fi
pathcomp=$pathcomp/
done
fi
if test -n "$dir_arg"; then
$doit $mkdircmd "$dst" \
&& { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
&& { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
&& { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
else
dstfile=`basename "$dst"`
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
rmtmp=$dstdir/_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
trap '(exit $?); exit' 1 2 13 15
# Copy the file name to the temp name.
$doit $cpprog "$src" "$dsttmp" &&
# and set any options; do chmod last to preserve setuid bits.
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
&& { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
&& { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
# Now rename the file to the real destination.
{ $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
|| {
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
# Now remove or move aside any old file at destination location.
# We try this two ways since rm can't unlink itself on some
# systems and the destination file might be busy for other
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
if test -f "$dstdir/$dstfile"; then
$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
|| $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
|| {
echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
(exit 1); exit 1
}
else
:
fi
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
}
}
fi || { (exit 1); exit 1; }
done
# The final little trick to "correctly" pass the exit status to the exit trap.
{
(exit 0); exit 0
}
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:

View File

@ -1,372 +0,0 @@
/*
* Asterisk -- An open source telephony toolkit.
*
* Copyright (C) 1999 - 2006, Digium, Inc.
*
* Mark Spencer <markster@digium.com>
* Kevin P. Fleming <kpfleming@digium.com>
*
* See http://www.asterisk.org for more information about
* the Asterisk project. Please do not directly contact
* any of the maintainers of this project for assistance;
* the project provides a web site, mailing lists and IRC
* channels for your use.
*
* This program is free software, distributed under the terms of
* the GNU General Public License Version 2. See the LICENSE file
* at the top of the source tree.
*/
#ifndef ASTERISK_LINKEDLISTS_H
#define ASTERISK_LINKEDLISTS_H
/*!
\brief Defines a structure to be used to hold a list of specified type (with no lock).
\param name This will be the name of the defined structure.
\param type This is the type of each list entry.
This macro creates a structure definition that can be used
to hold a list of the entries of type \a type. It does not actually
declare (allocate) a structure; to do that, either follow this
macro with the desired name of the instance you wish to declare,
or use the specified \a name to declare instances elsewhere.
Example usage:
\code
static AST_LIST_HEAD_NOLOCK(entry_list, entry) entries;
\endcode
This would define \c struct \c entry_list, and declare an instance of it named
\a entries, all intended to hold a list of type \c struct \c entry.
*/
#define AST_LIST_HEAD_NOLOCK(name, type) \
struct name { \
struct type *first; \
struct type *last; \
}
/*!
\brief Defines initial values for a declaration of AST_LIST_HEAD_NOLOCK
*/
#define AST_LIST_HEAD_NOLOCK_INIT_VALUE { \
.first = NULL, \
.last = NULL, \
}
/*!
\brief Defines a structure to be used to hold a list of specified type, statically initialized.
This is the same as AST_LIST_HEAD_STATIC, except without the lock included.
*/
#define AST_LIST_HEAD_NOLOCK_STATIC(name, type) \
struct name { \
struct type *first; \
struct type *last; \
} name = AST_LIST_HEAD_NOLOCK_INIT_VALUE
/*!
\brief Initializes a list head structure with a specified first entry.
\param head This is a pointer to the list head structure
\param entry pointer to the list entry that will become the head of the list
This macro initializes a list head structure by setting the head
entry to the supplied value.
*/
#define AST_LIST_HEAD_SET_NOLOCK(head, entry) do { \
(head)->first = (entry); \
(head)->last = (entry); \
} while (0)
/*!
\brief Declare a forward link structure inside a list entry.
\param type This is the type of each list entry.
This macro declares a structure to be used to link list entries together.
It must be used inside the definition of the structure named in
\a type, as follows:
\code
struct list_entry {
...
AST_LIST_ENTRY(list_entry) list;
}
\endcode
The field name \a list here is arbitrary, and can be anything you wish.
*/
#define AST_LIST_ENTRY(type) \
struct { \
struct type *next; \
}
/*!
\brief Returns the first entry contained in a list.
\param head This is a pointer to the list head structure
*/
#define AST_LIST_FIRST(head) ((head)->first)
/*!
\brief Returns the last entry contained in a list.
\param head This is a pointer to the list tail structure
*/
#define AST_LIST_LAST(head) ((head)->last)
/*!
\brief Returns the next entry in the list after the given entry.
\param elm This is a pointer to the current entry.
\param field This is the name of the field (declared using AST_LIST_ENTRY())
used to link entries of this list together.
*/
#define AST_LIST_NEXT(elm, field) ((elm)->field.next)
/*!
\brief Checks whether the specified list contains any entries.
\param head This is a pointer to the list head structure
Returns non-zero if the list has entries, zero if not.
*/
#define AST_LIST_EMPTY(head) (AST_LIST_FIRST(head) == NULL)
/*!
\brief Loops over (traverses) the entries in a list.
\param head This is a pointer to the list head structure
\param var This is the name of the variable that will hold a pointer to the
current list entry on each iteration. It must be declared before calling
this macro.
\param field This is the name of the field (declared using AST_LIST_ENTRY())
used to link entries of this list together.
This macro is use to loop over (traverse) the entries in a list. It uses a
\a for loop, and supplies the enclosed code with a pointer to each list
entry as it loops. It is typically used as follows:
\code
static AST_LIST_HEAD(entry_list, list_entry) entries;
...
struct list_entry {
...
AST_LIST_ENTRY(list_entry) list;
}
...
struct list_entry *current;
...
AST_LIST_TRAVERSE(&entries, current, list) {
(do something with current here)
}
\endcode
\warning If you modify the forward-link pointer contained in the \a current entry while
inside the loop, the behavior will be unpredictable. At a minimum, the following
macros will modify the forward-link pointer, and should not be used inside
AST_LIST_TRAVERSE() against the entry pointed to by the \a current pointer without
careful consideration of their consequences:
\li AST_LIST_NEXT() (when used as an lvalue)
\li AST_LIST_INSERT_AFTER()
\li AST_LIST_INSERT_HEAD()
\li AST_LIST_INSERT_TAIL()
*/
#define AST_LIST_TRAVERSE(head,var,field) \
for((var) = (head)->first; (var); (var) = (var)->field.next)
/*!
\brief Loops safely over (traverses) the entries in a list.
\param head This is a pointer to the list head structure
\param var This is the name of the variable that will hold a pointer to the
current list entry on each iteration. It must be declared before calling
this macro.
\param field This is the name of the field (declared using AST_LIST_ENTRY())
used to link entries of this list together.
This macro is used to safely loop over (traverse) the entries in a list. It
uses a \a for loop, and supplies the enclosed code with a pointer to each list
entry as it loops. It is typically used as follows:
\code
static AST_LIST_HEAD(entry_list, list_entry) entries;
...
struct list_entry {
...
AST_LIST_ENTRY(list_entry) list;
}
...
struct list_entry *current;
...
AST_LIST_TRAVERSE_SAFE_BEGIN(&entries, current, list) {
(do something with current here)
}
AST_LIST_TRAVERSE_SAFE_END;
\endcode
It differs from AST_LIST_TRAVERSE() in that the code inside the loop can modify
(or even free, after calling AST_LIST_REMOVE_CURRENT()) the entry pointed to by
the \a current pointer without affecting the loop traversal.
*/
#define AST_LIST_TRAVERSE_SAFE_BEGIN(head, var, field) { \
typeof((head)->first) __list_next; \
typeof((head)->first) __list_prev = NULL; \
typeof((head)->first) __new_prev = NULL; \
for ((var) = (head)->first, __new_prev = (var), \
__list_next = (var) ? (var)->field.next : NULL; \
(var); \
__list_prev = __new_prev, (var) = __list_next, \
__new_prev = (var), \
__list_next = (var) ? (var)->field.next : NULL \
)
/*!
\brief Removes the \a current entry from a list during a traversal.
\param head This is a pointer to the list head structure
\param field This is the name of the field (declared using AST_LIST_ENTRY())
used to link entries of this list together.
\note This macro can \b only be used inside an AST_LIST_TRAVERSE_SAFE_BEGIN()
block; it is used to unlink the current entry from the list without affecting
the list traversal (and without having to re-traverse the list to modify the
previous entry, if any).
*/
#define AST_LIST_REMOVE_CURRENT(head, field) do { \
__new_prev->field.next = NULL; \
__new_prev = __list_prev; \
if (__list_prev) \
__list_prev->field.next = __list_next; \
else \
(head)->first = __list_next; \
if (!__list_next) \
(head)->last = __list_prev; \
} while (0)
/*!
\brief Inserts a list entry before the current entry during a traversal.
\param head This is a pointer to the list head structure
\param elm This is a pointer to the entry to be inserted.
\param field This is the name of the field (declared using AST_LIST_ENTRY())
used to link entries of this list together.
\note This macro can \b only be used inside an AST_LIST_TRAVERSE_SAFE_BEGIN()
block.
*/
#define AST_LIST_INSERT_BEFORE_CURRENT(head, elm, field) do { \
if (__list_prev) { \
(elm)->field.next = __list_prev->field.next; \
__list_prev->field.next = elm; \
} else { \
(elm)->field.next = (head)->first; \
(head)->first = (elm); \
} \
__new_prev = (elm); \
} while (0)
/*!
\brief Closes a safe loop traversal block.
*/
#define AST_LIST_TRAVERSE_SAFE_END }
/*!
\brief Initializes a list head structure.
\param head This is a pointer to the list head structure
This macro initializes a list head structure by setting the head
entry to \a NULL (empty list). There is no embedded lock handling
with this macro.
*/
#define AST_LIST_HEAD_INIT_NOLOCK(head) { \
(head)->first = NULL; \
(head)->last = NULL; \
}
/*!
\brief Inserts a list entry after a given entry.
\param head This is a pointer to the list head structure
\param listelm This is a pointer to the entry after which the new entry should
be inserted.
\param elm This is a pointer to the entry to be inserted.
\param field This is the name of the field (declared using AST_LIST_ENTRY())
used to link entries of this list together.
*/
#define AST_LIST_INSERT_AFTER(head, listelm, elm, field) do { \
(elm)->field.next = (listelm)->field.next; \
(listelm)->field.next = (elm); \
if ((head)->last == (listelm)) \
(head)->last = (elm); \
} while (0)
/*!
\brief Inserts a list entry at the head of a list.
\param head This is a pointer to the list head structure
\param elm This is a pointer to the entry to be inserted.
\param field This is the name of the field (declared using AST_LIST_ENTRY())
used to link entries of this list together.
*/
#define AST_LIST_INSERT_HEAD(head, elm, field) do { \
(elm)->field.next = (head)->first; \
(head)->first = (elm); \
if (!(head)->last) \
(head)->last = (elm); \
} while (0)
/*!
\brief Appends a list entry to the tail of a list.
\param head This is a pointer to the list head structure
\param elm This is a pointer to the entry to be appended.
\param field This is the name of the field (declared using AST_LIST_ENTRY())
used to link entries of this list together.
Note: The link field in the appended entry is \b not modified, so if it is
actually the head of a list itself, the entire list will be appended
temporarily (until the next AST_LIST_INSERT_TAIL is performed).
*/
#define AST_LIST_INSERT_TAIL(head, elm, field) do { \
if (!(head)->first) { \
(head)->first = (elm); \
(head)->last = (elm); \
} else { \
(head)->last->field.next = (elm); \
(head)->last = (elm); \
} \
} while (0)
/*!
\brief Removes and returns the head entry from a list.
\param head This is a pointer to the list head structure
\param field This is the name of the field (declared using AST_LIST_ENTRY())
used to link entries of this list together.
Removes the head entry from the list, and returns a pointer to it.
This macro is safe to call on an empty list.
*/
#define AST_LIST_REMOVE_HEAD(head, field) ({ \
typeof((head)->first) cur = (head)->first; \
if (cur) { \
(head)->first = cur->field.next; \
cur->field.next = NULL; \
if ((head)->last == cur) \
(head)->last = NULL; \
} \
cur; \
})
/*!
\brief Removes a specific entry from a list.
\param head This is a pointer to the list head structure
\param elm This is a pointer to the entry to be removed.
\param field This is the name of the field (declared using AST_LIST_ENTRY())
used to link entries of this list together.
\warning The removed entry is \b not freed nor modified in any way.
*/
#define AST_LIST_REMOVE(head, elm, field) do { \
if ((head)->first == (elm)) { \
(head)->first = (elm)->field.next; \
if ((head)->last == (elm)) \
(head)->last = NULL; \
} else { \
typeof(elm) curelm = (head)->first; \
while (curelm && (curelm->field.next != (elm))) \
curelm = curelm->field.next; \
if (curelm) { \
curelm->field.next = (elm)->field.next; \
if ((head)->last == (elm)) \
(head)->last = curelm; \
} \
} \
(elm)->field.next = NULL; \
} while (0)
#endif /* _ASTERISK_LINKEDLISTS_H */

View File

@ -1,56 +0,0 @@
#!/bin/sh
if [ -f ${1}/.version ]; then
cat ${1}.version
elif [ -f ${1}/.svnrevision ]; then
echo SVN-`cat ${1}/.svnbranch`-r`cat ${1}/.svnrevision`
elif [ -d .svn ]; then
PARTS=`LANG=C svn info ${1} | grep URL | awk '{print $2;}' | sed -e 's:^.*/svn/menuselect/::' | sed -e 's:/: :g'`
BRANCH=0
TEAM=0
REV=`svnversion -c ${1} | cut -d: -f2`
if [ "${PARTS}" = "trunk" ]
then
echo SVN-'trunk'-r${REV}
exit 0
fi
for PART in $PARTS
do
if [ ${BRANCH} != 0 ]
then
RESULT="${RESULT}-${PART}"
break
fi
if [ ${TEAM} != 0 ]
then
RESULT="${RESULT}-${PART}"
continue
fi
if [ "${PART}" = "branches" ]
then
BRANCH=1
RESULT="branch"
continue
fi
if [ "${PART}" = "tags" ]
then
BRANCH=1
RESULT="tag"
continue
fi
if [ "${PART}" = "team" ]
then
TEAM=1
continue
fi
done
echo SVN-${RESULT##-}-r${REV}
fi

View File

@ -1,22 +0,0 @@
# NOTE: Names of _INCLUDE and _LIB entries in this file must be
# the exact uppercase equivalents of the names used for
# dependencies in menuselect for the same package.
CC=@CC@
OSARCH=@HOST_OS@
MENUSELECT_DEBUG=@MENUSELECT_DEBUG@
# The frontend can use curses, ncurses, newt or gtk2
CURSES_INCLUDE=@CURSES_INCLUDE@
CURSES_LIB=@CURSES_LIB@
GTK2_INCLUDE=@GTK2_INCLUDE@
GTK2_LIB=@GTK2_LIB@
NCURSES_INCLUDE=@NCURSES_INCLUDE@
NCURSES_LIB=@NCURSES_LIB@
NEWT_INCLUDE=@NEWT_INCLUDE@
NEWT_LIB=@NEWT_LIB@

File diff suppressed because it is too large Load Diff

View File

@ -1,157 +0,0 @@
/*
* Asterisk -- An open source telephony toolkit.
*
* Copyright (C) 2005-2006, Russell Bryant
*
* Russell Bryant <russell@digium.com>
*
* See http://www.asterisk.org for more information about
* the Asterisk project. Please do not directly contact
* any of the maintainers of this project for assistance;
* the project provides a web site, mailing lists and IRC
* channels for your use.
*
* This program is free software, distributed under the terms of
* the GNU General Public License Version 2. See the LICENSE file
* at the top of the source tree.
*/
/*!
* \file
*
* \brief public data structures and defaults for menuselect
*
*/
#ifndef MENUSELECT_H
#define MENUSELECT_H
#include "linkedlists.h"
#define OUTPUT_MAKEOPTS_DEFAULT "menuselect.makeopts"
#define OUTPUT_MAKEDEPS_DEFAULT "menuselect.makedeps"
#define MENUSELECT_DEPS "build_tools/menuselect-deps"
struct member;
struct reference {
/*! the name of the dependency */
const char *name;
/*! the display name of the dependency */
const char *displayname;
/*! if this dependency is a member, not an external object */
struct member *member;
/*! if this package was found */
unsigned char met:1;
/*! for linking */
AST_LIST_ENTRY(reference) list;
};
enum failure_types {
NO_FAILURE = 0,
SOFT_FAILURE = 1,
HARD_FAILURE = 2,
};
struct member {
/*! What will be sent to the makeopts file */
const char *name;
/*! Display name if known */
const char *displayname;
/*! Default setting */
const char *defaultenabled;
/*! Delete these file(s) if this member changes */
const char *remove_on_change;
/*! Touch these file(s) if this member changes */
const char *touch_on_change;
const char *support_level;
const char *replacement;
/*! This module is currently selected */
unsigned int enabled:1;
/*! This module was enabled when the config was loaded */
unsigned int was_enabled:1;
/*! This module has failed dependencies */
unsigned int depsfailed:2;
/*! This module has failed conflicts */
unsigned int conflictsfailed:2;
/*! This module's 'enabled' flag was changed by a default only */
unsigned int was_defaulted:1;
/*! This module is a dependency, and if it is selected then
we have included it in the MENUSELECT_BUILD_DEPS line
in the output file */
unsigned int build_deps_output:1;
/*! This module should never be enabled automatically, but only
* when explicitly set. */
unsigned int explicitly_enabled_only:1;
/*! This isn't actually a module! It's a separator, and it should
* be passed over for many of the usual purposes associated with members. */
unsigned int is_separator:1;
/*! dependencies of this module */
AST_LIST_HEAD_NOLOCK(, reference) deps;
/*! conflicts of this module */
AST_LIST_HEAD_NOLOCK(, reference) conflicts;
/*! optional packages used by this module */
AST_LIST_HEAD_NOLOCK(, reference) uses;
/*! for making a list of modules */
AST_LIST_ENTRY(member) list;
};
enum support_level_values {
SUPPORT_CORE = 0,
SUPPORT_EXTENDED = 1,
SUPPORT_DEPRECATED = 2,
SUPPORT_UNSPECIFIED = 3,
SUPPORT_COUNT = 4, /* Keep this item at the end of the list. Tracks total number of support levels. */
};
struct category {
struct member *separators[SUPPORT_COUNT];
/*! the Makefile variable */
const char *name;
/*! the name displayed in the menu */
const char *displayname;
/*! Delete these file(s) if anything in this category changes */
const char *remove_on_change;
/*! Touch these file(s) if anything in this category changes */
const char *touch_on_change;
/*! Output what is selected, as opposed to not selected */
unsigned int positive_output:1;
/*! All choices in this category are mutually exclusive */
unsigned int exclusive:1;
/*! the list of possible values to be set in this variable */
AST_LIST_HEAD_NOLOCK(, member) members;
/*! for linking */
AST_LIST_ENTRY(category) list;
};
extern AST_LIST_HEAD_NOLOCK(categories, category) categories;
extern const char *menu_name;
/*! This is implemented by the frontend */
int run_menu(void);
int count_categories(void);
int count_members(struct category *cat);
/*! \brief Toggle a member of a category at the specified index to enabled/disabled */
void toggle_enabled_index(struct category *cat, int index);
void toggle_enabled(struct member *mem);
/*! \brief Set a member of a category at the specified index to enabled */
void set_enabled(struct category *cat, int index);
/*! \brief Set a member of a category at the specified index to not enabled */
void clear_enabled(struct category *cat, int index);
/*! \brief Enable/Disable all members of a category as long as dependencies have been met and no conflicts are found */
void set_all(struct category *cat, int val);
/*! \brief returns non-zero if the string is not defined, or has zero length */
static inline int strlen_zero(const char *s)
{
return (!s || (*s == '\0'));
}
#endif /* MENUSELECT_H */

File diff suppressed because it is too large Load Diff

View File

@ -1,358 +0,0 @@
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <gtk/gtk.h>
#include "menuselect.h"
enum {
/*! The row name */
COLUMN_NAME,
/*! Whether this row is enabled */
COLUMN_SELECTED,
/*! Dependencies */
COLUMN_DEPS,
/*! Optional dependencies */
COLUMN_USES,
/*! Conflicts */
COLUMN_CNFS,
/*! Number of columns, must be the last element in the enum */
NUM_COLUMNS,
};
static void handle_save(GtkWidget *w, gpointer data);
static void handle_about(GtkWidget *w, gpointer data);
static void handle_quit(GtkWidget *w, gpointer data);
static GtkItemFactoryEntry menu_items[] = {
{ "/_File", NULL, NULL, 0, "<Branch>" },
{ "/File/_Save And Quit", "<control>S", handle_save, 0, "<StockItem>", GTK_STOCK_SAVE },
{ "/File/sep1", NULL, NULL, 0, "<Separator>" },
{ "/File/_Quit", "<CTRL>Q", handle_quit, 0, "<StockItem>", GTK_STOCK_QUIT },
{ "/_Help", NULL, NULL, 0, "<LastBranch>" },
{ "/_Help/About", NULL, handle_about, 0, "<Item>" },
};
static gint nmenu_items = sizeof(menu_items) / sizeof(menu_items[0]);
static GtkTreeView *tree;
static GtkWidget *window;
/* 0, save ... non-zero, don't save */
static int main_res = 1;
static int change_made = 0;
static void handle_save(GtkWidget *w, gpointer data)
{
main_res = 0;
gtk_main_quit();
}
static void handle_about(GtkWidget *w, gpointer data)
{
GtkWidget *dialog;
dialog = gtk_message_dialog_new(GTK_WINDOW(window), GTK_DIALOG_MODAL,
GTK_MESSAGE_INFO, GTK_BUTTONS_OK,
"GMenuselect - http://www.asterisk.org/\n"
"Russell Bryant <russell@digium.com>\n"
"Copyright (C) 2007\n");
gtk_dialog_run(GTK_DIALOG(dialog));
gtk_widget_destroy(dialog);
}
static gboolean delete_event(GtkWidget *widget, GdkEvent *event, gpointer data)
{
return FALSE;
}
static void handle_quit(GtkWidget *widget, gpointer data)
{
gtk_main_quit();
}
static void destroy(GtkWidget *widget, gpointer data)
{
GtkWidget *dialog;
gint response;
if (!main_res || !change_made) {
gtk_main_quit();
return;
}
dialog = gtk_message_dialog_new(GTK_WINDOW(window), GTK_DIALOG_MODAL,
GTK_MESSAGE_QUESTION, GTK_BUTTONS_YES_NO, "Save before quit?");
response = gtk_dialog_run(GTK_DIALOG(dialog));
gtk_widget_destroy(dialog);
if (response == GTK_RESPONSE_YES)
main_res = 0;
gtk_main_quit();
}
static void toggled_handler(GtkCellRendererToggle *renderer, gchar *path, gpointer data)
{
gchar *cat_num_str, *mem_num_str;
int cat_num, mem_num;
int i = 0;
struct category *cat;
struct member *mem;
GtkTreeStore *store = data;
GtkTreeModel *model;
GtkTreeIter cat_iter, mem_iter;
mem_num_str = alloca(strlen(path)) + 1;
strcpy(mem_num_str, path);
cat_num_str = strsep(&mem_num_str, ":");
if (!mem_num_str || !*mem_num_str)
return;
cat_num = atoi(cat_num_str);
mem_num = atoi(mem_num_str);
AST_LIST_TRAVERSE(&categories, cat, list) {
if (i == cat_num)
break;
i++;
}
if (!cat)
return;
i = 0;
AST_LIST_TRAVERSE(&cat->members, mem, list) {
if (i == mem_num)
break;
i++;
}
if (!mem)
return;
toggle_enabled(mem);
model = gtk_tree_view_get_model(tree);
gtk_tree_model_get_iter_first(model, &cat_iter);
for (i = 0; i < cat_num; i++) {
if (!gtk_tree_model_iter_next(model, &cat_iter))
break;
}
if (i != cat_num)
return;
if (!gtk_tree_model_iter_children(model, &mem_iter, &cat_iter))
return;
for (i = 0; i < mem_num; i++) {
if (!gtk_tree_model_iter_next(model, &mem_iter))
break;
}
if (i != mem_num)
return;
gtk_tree_store_set(store, &mem_iter, COLUMN_SELECTED, mem->enabled, -1);
change_made = 1;
}
static void row_activated_handler(GtkTreeView *treeview, GtkTreePath *path,
GtkTreeViewColumn *col, gpointer data)
{
GtkTreeIter iter;
GtkTreeModel *model;
GtkTreeStore *store = data;
gchar *name;
struct category *cat;
struct member *mem;
model = gtk_tree_view_get_model(treeview);
if (!gtk_tree_model_get_iter(model, &iter, path))
return;
gtk_tree_model_get(model, &iter, COLUMN_NAME, &name, -1);
AST_LIST_TRAVERSE(&categories, cat, list) {
AST_LIST_TRAVERSE(&cat->members, mem, list) {
if (strcmp(name, mem->name))
continue;
toggle_enabled(mem);
gtk_tree_store_set(store, &iter, COLUMN_SELECTED, mem->enabled, -1);
change_made = 1;
break;
}
if (mem)
break;
}
g_free(name);
}
static GtkWidget *get_menubar_menu(GtkWidget *window)
{
GtkItemFactory *item_factory;
GtkAccelGroup *accel_group;
/* Make an accelerator group (shortcut keys) */
accel_group = gtk_accel_group_new();
/* Make an ItemFactory (that makes a menubar) */
item_factory = gtk_item_factory_new(GTK_TYPE_MENU_BAR, "<main>",
accel_group);
/* This function generates the menu items. Pass the item factory,
the number of items in the array, the array itself, and any
callback data for the the menu items. */
gtk_item_factory_create_items(item_factory, nmenu_items, menu_items, NULL);
/* Attach the new accelerator group to the window. */
gtk_window_add_accel_group(GTK_WINDOW(window), accel_group);
/* Finally, return the actual menu bar created by the item factory. */
return gtk_item_factory_get_widget(item_factory, "<main>");
}
int run_menu(void)
{
int argc = 0;
char **argv = NULL;
GtkWidget *s_window;
GtkCellRenderer *renderer;
GtkTreeViewColumn *column;
GtkTreeStore *store;
struct category *cat;
struct member *mem;
GtkWidget *main_vbox;
GtkWidget *menubar;
gtk_init(&argc, &argv);
window = gtk_window_new(GTK_WINDOW_TOPLEVEL);
gtk_widget_set_size_request(window, 640, 480);
gtk_window_set_title(GTK_WINDOW(window), "GMenuselect");
main_vbox = gtk_vbox_new(FALSE, 1);
gtk_container_set_border_width(GTK_CONTAINER(main_vbox), 1);
gtk_container_add(GTK_CONTAINER(window), main_vbox);
menubar = get_menubar_menu(window);
gtk_box_pack_start(GTK_BOX(main_vbox), menubar, FALSE, FALSE, 0);
s_window = gtk_scrolled_window_new(NULL, NULL);
g_signal_connect(G_OBJECT(window), "delete_event",
G_CALLBACK(delete_event), NULL);
g_signal_connect(G_OBJECT(window), "destroy",
G_CALLBACK(destroy), NULL);
store = gtk_tree_store_new(NUM_COLUMNS,
G_TYPE_STRING, /* COLUMN_NAME */
G_TYPE_BOOLEAN, /* COLUMN_SELECTED */
G_TYPE_STRING, /* COLUMN_DEPS */
G_TYPE_STRING, /* COLUMN_USES */
G_TYPE_STRING); /* COLUMN_CNFS */
AST_LIST_TRAVERSE(&categories, cat, list) {
GtkTreeIter iter, iter2;
gtk_tree_store_append(store, &iter, NULL);
gtk_tree_store_set(store, &iter,
COLUMN_NAME, cat->displayname,
COLUMN_SELECTED, TRUE,
-1);
AST_LIST_TRAVERSE(&cat->members, mem, list) {
char name_buf[64];
char dep_buf[64] = "";
char use_buf[64] = "";
char cnf_buf[64] = "";
struct reference *dep;
struct reference *use;
struct reference *cnf;
AST_LIST_TRAVERSE(&mem->deps, dep, list) {
strncat(dep_buf, dep->displayname, sizeof(dep_buf) - strlen(dep_buf) - 1);
strncat(dep_buf, dep->member ? "(M)" : "(E)", sizeof(dep_buf) - strlen(dep_buf) - 1);
if (AST_LIST_NEXT(dep, list))
strncat(dep_buf, ", ", sizeof(dep_buf) - strlen(dep_buf) - 1);
}
AST_LIST_TRAVERSE(&mem->uses, use, list) {
strncat(use_buf, use->displayname, sizeof(use_buf) - strlen(use_buf) - 1);
if (AST_LIST_NEXT(use, list))
strncat(use_buf, ", ", sizeof(use_buf) - strlen(use_buf) - 1);
}
AST_LIST_TRAVERSE(&mem->conflicts, cnf, list) {
strncat(cnf_buf, cnf->displayname, sizeof(cnf_buf) - strlen(cnf_buf) - 1);
strncat(cnf_buf, cnf->member ? "(M)" : "(E)", sizeof(cnf_buf) - strlen(cnf_buf) - 1);
if (AST_LIST_NEXT(cnf, list))
strncat(cnf_buf, ", ", sizeof(cnf_buf) - strlen(cnf_buf) - 1);
}
if (mem->is_separator) {
snprintf(name_buf, sizeof(name_buf), "--- %s ---", mem->name);
} else {
snprintf(name_buf, sizeof(name_buf), "%s", mem->name);
}
if (mem->depsfailed == HARD_FAILURE)
strncat(name_buf, " (Failed Deps.)", sizeof(name_buf) - strlen(name_buf) - 1);
if (mem->conflictsfailed == HARD_FAILURE)
strncat(name_buf, " (In Conflict)", sizeof(name_buf) - strlen(name_buf) - 1);
gtk_tree_store_append(store, &iter2, &iter);
gtk_tree_store_set(store, &iter2,
COLUMN_NAME, name_buf,
COLUMN_SELECTED, mem->enabled,
COLUMN_DEPS, dep_buf,
COLUMN_USES, use_buf,
COLUMN_CNFS, cnf_buf,
-1);
}
}
tree = (GtkTreeView *) gtk_tree_view_new_with_model(GTK_TREE_MODEL(store));
#if GTK_CHECK_VERSION(2,10,0)
gtk_tree_view_set_enable_tree_lines(tree, TRUE);
gtk_tree_view_set_grid_lines(tree, GTK_TREE_VIEW_GRID_LINES_BOTH);
#endif
renderer = gtk_cell_renderer_text_new();
column = gtk_tree_view_column_new_with_attributes("Name",
renderer, "text", COLUMN_NAME, NULL);
gtk_tree_view_append_column(GTK_TREE_VIEW(tree), column);
renderer = gtk_cell_renderer_toggle_new();
column = gtk_tree_view_column_new_with_attributes("Selected",
renderer, "active", COLUMN_SELECTED, NULL);
gtk_tree_view_append_column(GTK_TREE_VIEW(tree), column);
g_signal_connect(renderer, "toggled", (GCallback) toggled_handler, store);
renderer = gtk_cell_renderer_text_new();
column = gtk_tree_view_column_new_with_attributes("Depends On",
renderer, "text", COLUMN_DEPS, NULL);
gtk_tree_view_append_column(GTK_TREE_VIEW(tree), column);
renderer = gtk_cell_renderer_text_new();
column = gtk_tree_view_column_new_with_attributes("Can Use",
renderer, "text", COLUMN_USES, NULL);
gtk_tree_view_append_column(GTK_TREE_VIEW(tree), column);
renderer = gtk_cell_renderer_text_new();
column = gtk_tree_view_column_new_with_attributes("Conflicts With",
renderer, "text", COLUMN_CNFS, NULL);
gtk_tree_view_append_column(GTK_TREE_VIEW(tree), column);
g_signal_connect(tree, "row-activated", (GCallback) row_activated_handler, store);
gtk_container_add(GTK_CONTAINER(s_window), GTK_WIDGET(tree));
gtk_box_pack_end(GTK_BOX(main_vbox), s_window, TRUE, TRUE, 0);
gtk_widget_show_all(window);
gtk_main();
return main_res;
}

View File

@ -1,427 +0,0 @@
/*
* Asterisk -- An open source telephony toolkit.
*
* Copyright (C) 2008 Sean Bright
*
* Sean Bright <sean.bright@gmail.com>
*
* See http://www.asterisk.org for more information about
* the Asterisk project. Please do not directly contact
* any of the maintainers of this project for assistance;
* the project provides a web site, mailing lists and IRC
* channels for your use.
*
* This program is free software, distributed under the terms of
* the GNU General Public License Version 2. See the LICENSE file
* at the top of the source tree.
*/
/*
* \file
*
* \author Sean Bright <sean.bright@gmail.com>
*
* \brief newt frontend for selection maintenance
*/
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <newt.h>
#include "menuselect.h"
#define MIN_X 80
#define MIN_Y 21
#define MIN(a, b) ({ typeof(a) __a = (a); typeof(b) __b = (b); ((__a > __b) ? __b : __a);})
#define MAX(a, b) ({ typeof(a) __a = (a); typeof(b) __b = (b); ((__a < __b) ? __b : __a);})
extern int changes_made;
static newtComponent rootOptions;
static newtComponent subOptions;
static newtComponent memberNameTextbox;
static newtComponent dependsLabel;
static newtComponent usesLabel;
static newtComponent conflictsLabel;
static newtComponent supportLevelLabel;
static newtComponent dependsDataTextbox;
static newtComponent usesDataTextbox;
static newtComponent conflictsDataTextbox;
static newtComponent supportLevelDataTextbox;
static newtComponent exitButton;
static newtComponent saveAndExitButton;
static void build_members_menu(int overlay);
static void root_menu_callback(newtComponent component, void *data);
static void toggle_all_options(int select)
{
struct category *cat = newtListboxGetCurrent(rootOptions);
set_all(cat, select);
/* Redraw */
build_members_menu(1);
return;
}
static void toggle_selected_option()
{
int i;
struct member *mem = newtListboxGetCurrent(subOptions);
toggle_enabled(mem);
/* Redraw */
build_members_menu(1);
/* Select the next item in the list */
for (i = 0; i < newtListboxItemCount(subOptions); i++) {
struct member *cur;
newtListboxGetEntry(subOptions, i, NULL, (void **) &cur);
if (cur == mem) {
i = MIN(i + 1, newtListboxItemCount(subOptions) - 1);
break;
}
}
newtListboxSetCurrent(subOptions, i);
return;
}
static void reset_display()
{
newtTextboxSetText(memberNameTextbox, "");
newtTextboxSetText(dependsDataTextbox, "");
newtTextboxSetText(usesDataTextbox, "");
newtTextboxSetText(conflictsDataTextbox, "");
newtTextboxSetText(supportLevelDataTextbox, "");
newtRefresh();
}
static void display_member_info(struct member *mem)
{
char buffer[128] = { 0 };
struct reference *dep;
struct reference *con;
struct reference *uses;
reset_display();
if (mem->displayname) {
newtTextboxSetText(memberNameTextbox, mem->displayname);
}
if (AST_LIST_EMPTY(&mem->deps)) {
if (mem->is_separator) {
newtTextboxSetText(dependsDataTextbox, "");
} else {
newtTextboxSetText(dependsDataTextbox, "N/A");
}
} else {
strcpy(buffer, "");
AST_LIST_TRAVERSE(&mem->deps, dep, list) {
strncat(buffer, dep->displayname, sizeof(buffer) - strlen(buffer) - 1);
strncat(buffer, dep->member ? "(M)" : "(E)", sizeof(buffer) - strlen(buffer) - 1);
if (AST_LIST_NEXT(dep, list))
strncat(buffer, ", ", sizeof(buffer) - strlen(buffer) - 1);
}
newtTextboxSetText(dependsDataTextbox, buffer);
}
if (AST_LIST_EMPTY(&mem->uses)) {
if (mem->is_separator) {
newtTextboxSetText(usesDataTextbox, "");
} else {
newtTextboxSetText(usesDataTextbox, "N/A");
}
} else {
strcpy(buffer, "");
AST_LIST_TRAVERSE(&mem->uses, uses, list) {
strncat(buffer, uses->displayname, sizeof(buffer) - strlen(buffer) - 1);
strncat(buffer, uses->member ? "(M)" : "(E)", sizeof(buffer) - strlen(buffer) - 1);
if (AST_LIST_NEXT(uses, list))
strncat(buffer, ", ", sizeof(buffer) - strlen(buffer) - 1);
}
newtTextboxSetText(usesDataTextbox, buffer);
}
if (AST_LIST_EMPTY(&mem->conflicts)) {
if (!mem->is_separator) {
newtTextboxSetText(conflictsDataTextbox, "N/A");
} else {
newtTextboxSetText(conflictsDataTextbox, "");
}
} else {
strcpy(buffer, "");
AST_LIST_TRAVERSE(&mem->conflicts, con, list) {
strncat(buffer, con->displayname, sizeof(buffer) - strlen(buffer) - 1);
strncat(buffer, con->member ? "(M)" : "(E)", sizeof(buffer) - strlen(buffer) - 1);
if (AST_LIST_NEXT(con, list))
strncat(buffer, ", ", sizeof(buffer) - strlen(buffer) - 1);
}
newtTextboxSetText(conflictsDataTextbox, buffer);
}
{ /* Support Level */
snprintf(buffer, sizeof(buffer), "%s", mem->support_level);
if (mem->replacement && *mem->replacement) {
char buf2[64];
snprintf(buf2, sizeof(buf2), ", Replaced by: %s", mem->replacement);
strncat(buffer, buf2, sizeof(buffer) - strlen(buffer) - 1);
}
if (mem->is_separator) {
newtTextboxSetText(supportLevelDataTextbox, "");
} else {
newtTextboxSetText(supportLevelDataTextbox, buffer);
}
}
}
static void build_members_menu(int overlay)
{
struct category *cat;
struct member *mem;
char buf[64];
int i = 0;
if (!overlay) {
reset_display();
newtListboxClear(subOptions);
}
cat = newtListboxGetCurrent(rootOptions);
AST_LIST_TRAVERSE(&cat->members, mem, list) {
if ((mem->depsfailed == HARD_FAILURE) || (mem->conflictsfailed == HARD_FAILURE)) {
snprintf(buf, sizeof(buf), "XXX %s", mem->name);
} else if (mem->is_separator) {
snprintf(buf, sizeof(buf), " --- %s ---", mem->name);
} else if (mem->depsfailed == SOFT_FAILURE) {
snprintf(buf, sizeof(buf), "<%s> %s", mem->enabled ? "*" : " ", mem->name);
} else if (mem->conflictsfailed == SOFT_FAILURE) {
snprintf(buf, sizeof(buf), "(%s) %s", mem->enabled ? "*" : " ", mem->name);
} else {
snprintf(buf, sizeof(buf), "[%s] %s", mem->enabled ? "*" : " ", mem->name);
}
if (overlay) {
newtListboxSetEntry(subOptions, i, buf);
} else {
newtListboxAppendEntry(subOptions, buf, mem);
}
i++;
}
if (!overlay) {
display_member_info(AST_LIST_FIRST(&cat->members));
}
return;
}
static void build_main_menu()
{
struct category *cat;
char buf[64];
int i = 1;
newtListboxClear(rootOptions);
AST_LIST_TRAVERSE(&categories, cat, list) {
if (!strlen_zero(cat->displayname))
snprintf(buf, sizeof(buf), " %s ", cat->displayname);
else
snprintf(buf, sizeof(buf), " %s ", cat->name);
newtListboxAppendEntry(rootOptions, buf, cat);
i++;
}
}
static void category_menu_callback(newtComponent component, void *data)
{
display_member_info(newtListboxGetCurrent(subOptions));
}
static void root_menu_callback(newtComponent component, void *data)
{
build_members_menu(0);
}
int run_confirmation_dialog(int *result)
{
int res = newtWinTernary("Are You Sure?", "Discard changes & Exit", "Save & Exit", "Cancel",
"It appears you have made some changes, and you have opted to Quit "
"without saving these changes. Please choose \"Discard changes & Exit\" to exit "
"without saving; Choose \"Cancel\" to cancel your decision to quit, and keep "
"working in menuselect, or choose \"Save & Exit\" to save your changes, and exit.");
switch (res) {
case 1:
/* Discard and exit */
*result = -1;
return 1;
case 2:
/* Save and exit */
*result = 0;
return 1;
case 3:
/* They either chose "No" or they hit F12 */
default:
*result = -1;
return 0;
}
}
int run_menu(void)
{
struct newtExitStruct es;
newtComponent form;
int x = 0, y = 0, res = 0;
newtInit();
newtCls();
newtGetScreenSize(&x, &y);
if (x < MIN_X || y < MIN_Y) {
newtFinished();
fprintf(stderr, "Terminal must be at least %d x %d.\n", MIN_X, MIN_Y);
return -1;
}
newtPushHelpLine(" <ENTER> toggles selection | <F12> saves & exits | <ESC> exits without save");
newtRefresh();
newtCenteredWindow(x - 8, y - 7, menu_name);
form = newtForm(NULL, NULL, 0);
/* F8 for select all */
newtFormAddHotKey(form, NEWT_KEY_F8);
/* F7 for deselect all */
newtFormAddHotKey(form, NEWT_KEY_F7);
newtFormSetTimer(form, 200);
rootOptions = newtListbox(2, 1, y - 15, 0);
newtListboxSetWidth(rootOptions, 34);
newtFormAddComponent(form, rootOptions);
newtComponentAddCallback(rootOptions, root_menu_callback, NULL);
subOptions = newtListbox(38, 1, y - 15, NEWT_FLAG_SCROLL | NEWT_FLAG_RETURNEXIT);
newtListboxSetWidth(subOptions, x - 47);
newtFormAddComponent(form, subOptions);
newtComponentAddCallback(subOptions, category_menu_callback, NULL);
memberNameTextbox = newtTextbox(2, y - 13, x - 10, 1, 0);
dependsLabel = newtLabel(2, y - 11, " Depends on:");
usesLabel = newtLabel(2, y - 10, " Can use:");
conflictsLabel = newtLabel(2, y - 9, "Conflicts with:");
supportLevelLabel = newtLabel(2, y - 8, " Support Level:");
dependsDataTextbox = newtTextbox(18, y - 11, x - 27, 1, 0);
usesDataTextbox = newtTextbox(18, y - 10, x - 27, 1, 0);
conflictsDataTextbox = newtTextbox(18, y - 9, x - 27, 1, 0);
supportLevelDataTextbox = newtTextbox(18, y - 8, x - 27, 1, 0);
exitButton = newtButton(x - 23, y - 11, " Exit ");
saveAndExitButton = newtButton(x - 43, y - 11, " Save & Exit ");
newtFormAddComponents(
form,
memberNameTextbox,
dependsLabel,
dependsDataTextbox,
usesLabel,
usesDataTextbox,
conflictsLabel,
conflictsDataTextbox,
supportLevelLabel,
supportLevelDataTextbox,
saveAndExitButton,
exitButton,
NULL);
build_main_menu();
root_menu_callback(rootOptions, AST_LIST_FIRST(&categories));
for (;;) {
do {
newtFormRun(form, &es);
} while (es.reason == NEWT_EXIT_TIMER);
if (es.reason == NEWT_EXIT_HOTKEY) {
int done = 1;
switch (es.u.key) {
case NEWT_KEY_F12:
res = 0;
break;
case NEWT_KEY_F7:
toggle_all_options(0);
done = 0;
break;
case NEWT_KEY_F8:
toggle_all_options(1);
done = 0;
break;
case NEWT_KEY_ESCAPE:
if (changes_made) {
done = run_confirmation_dialog(&res);
} else {
res = -1;
}
break;
default:
done = 0;
break;
}
if (done) {
break;
}
} else if (es.reason == NEWT_EXIT_COMPONENT) {
if (es.u.co == saveAndExitButton) {
res = 0;
break;
} else if (es.u.co == exitButton) {
int done = 1;
if (changes_made) {
done = run_confirmation_dialog(&res);
} else {
res = -1;
}
if (done) {
break;
}
} else if (es.u.co == subOptions) {
toggle_selected_option();
}
}
}
/* Cleanup */
reset_display();
newtFormDestroy(form);
newtPopWindow();
newtPopHelpLine();
newtCls();
newtFinished();
return res;
}

View File

@ -1,39 +0,0 @@
/*
* Asterisk -- An open source telephony toolkit.
*
* Copyright (C) 2005 - 2006, Russell Bryant
*
* Russell Bryant <russell@digium.com>
*
* See http://www.asterisk.org for more information about
* the Asterisk project. Please do not directly contact
* any of the maintainers of this project for assistance;
* the project provides a web site, mailing lists and IRC
* channels for your use.
*
* This program is free software, distributed under the terms of
* the GNU General Public License Version 2. See the LICENSE file
* at the top of the source tree.
*/
/*
* \file
*
* \author Russell Bryant <russell@digium.com>
*
* \brief Menu stub
*/
#include <stdlib.h>
#include <stdio.h>
#include "menuselect.h"
int run_menu(void)
{
fprintf(stderr, "**************************************************\n");
fprintf(stderr, "*** Install ncurses to use the menu interface! ***\n");
fprintf(stderr, "**************************************************\n");
return -1;
}

View File

@ -1,360 +0,0 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
scriptversion=2005-06-08.21
# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
# 02110-1301, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
echo 1>&2 "Try \`$0 --help' for more information"
exit 1
fi
run=:
# In the cases where this matters, `missing' is being run in the
# srcdir already.
if test -f configure.ac; then
configure_ac=configure.ac
else
configure_ac=configure.in
fi
msg="missing on your system"
case "$1" in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
shift
"$@" && exit 0
# Exit code 63 means version mismatch. This often happens
# when the user try to use an ancient version of a tool on
# a file that requires a minimum version. In this case we
# we should proceed has if the program had been absent, or
# if --run hadn't been passed.
if test $? = 63; then
run=:
msg="probably too old"
fi
;;
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
error status if there is no known handling for PROGRAM.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
--run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
help2man touch the output file
lex create \`lex.yy.c', if possible, from existing .c
makeinfo touch the output file
tar try tar, gnutar, gtar, then tar without non-portable flags
yacc create \`y.tab.[ch]', if possible, from existing .[ch]
Send bug reports to <bug-automake@gnu.org>."
exit $?
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing $scriptversion (GNU Automake)"
exit $?
;;
-*)
echo 1>&2 "$0: Unknown \`$1' option"
echo 1>&2 "Try \`$0 --help' for more information"
exit 1
;;
esac
# Now exit if we have it, but it failed. Also exit now if we
# don't have it and --version was passed (most likely to detect
# the program).
case "$1" in
lex|yacc)
# Not GNU programs, they don't have --version.
;;
tar)
if test -n "$run"; then
echo 1>&2 "ERROR: \`tar' requires --run"
exit 1
elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
exit 1
fi
;;
*)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
# Could not run --version or --help. This is probably someone
# running `$TOOL --version' or `$TOOL --help' to check whether
# $TOOL exists and not knowing $TOOL uses missing.
exit 1
fi
;;
esac
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
case "$1" in
aclocal*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`acinclude.m4' or \`${configure_ac}'. You might want
to install the \`Automake' and \`Perl' packages. Grab them from
any GNU archive site."
touch aclocal.m4
;;
autoconf)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`${configure_ac}'. You might want to install the
\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
archive site."
touch configure
;;
autoheader)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
to install the \`Autoconf' and \`GNU m4' packages. Grab them
from any GNU archive site."
files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
case "$f" in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
esac
done
touch $touch_files
;;
automake*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
You might want to install the \`Automake' and \`Perl' packages.
Grab them from any GNU archive site."
find . -type f -name Makefile.am -print |
sed 's/\.am$/.in/' |
while read f; do touch "$f"; done
;;
autom4te)
echo 1>&2 "\
WARNING: \`$1' is needed, but is $msg.
You might have modified some files without having the
proper tools for further handling them.
You can get \`$1' as part of \`Autoconf' from any GNU
archive site."
file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
echo "#! /bin/sh"
echo "# Created by GNU Automake missing as a replacement of"
echo "# $ $@"
echo "exit 0"
chmod +x $file
exit 1
fi
;;
bison|yacc)
echo 1>&2 "\
WARNING: \`$1' $msg. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
case "$LASTARG" in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
if [ ! -f y.tab.h ]; then
echo >y.tab.h
fi
if [ ! -f y.tab.c ]; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
lex|flex)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
case "$LASTARG" in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
if [ ! -f lex.yy.c ]; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
help2man)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a dependency of a manual page. You may need the
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
fi
if [ -f "$file" ]; then
touch $file
else
test -z "$file" || exec >$file
echo ".ab help2man is required to generate this page"
exit 1
fi
;;
makeinfo)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy \`make' (AIX,
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
# The file to touch is that specified with -o ...
file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
# ... or it is the one specified with @setfilename ...
infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
# ... or it is derived from the source name (dir/f.texi becomes f.info)
test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
fi
# If the file does not exist, the user really needs makeinfo;
# let's fail without touching anything.
test -f $file || exit 1
touch $file
;;
tar)
shift
# We have already tried tar in the generic part.
# Look for gnutar/gtar before invocation to avoid ugly error
# messages.
if (gnutar --version > /dev/null 2>&1); then
gnutar "$@" && exit 0
fi
if (gtar --version > /dev/null 2>&1); then
gtar "$@" && exit 0
fi
firstarg="$1"
if shift; then
case "$firstarg" in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
case "$firstarg" in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
;;
esac
fi
echo 1>&2 "\
WARNING: I can't seem to be able to run \`tar' with the given arguments.
You may want to install GNU tar or Free paxutils, or check the
command line arguments."
exit 1
;;
*)
echo 1>&2 "\
WARNING: \`$1' is needed, and is $msg.
You might have modified some files without having the
proper tools for further handling them. Check the \`README' file,
it often tells you about the needed prerequisites for installing
this package. You may also peek at any GNU archive site, in case
some other package would contain this missing \`$1' program."
exit 1
;;
esac
exit 0
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:

View File

@ -1,5 +0,0 @@
Mini-XML 2.2.2 is now available for download from:
http://www.easysw.com/~mike/mxml/software.php
Mini-XML 2.2.2 fixes a bug in the reading of custom data nodes.

View File

@ -1,213 +0,0 @@
CHANGES - 05/19/2005
--------------------
CHANGES IN Mini-XML 2.2.2
- mxmlLoad*() did not treat custom data as opaque, so
whitespace characters would be lost.
CHANGES IN Mini-XML 2.2.1
- mxmlLoadFd(), mxmlLoadFile(), and mxmlLoadString() now
correctly return NULL on error (STR #21)
- mxmlNewInteger(), mxmlNewOpaque(), mxmlNewReal(),
mxmlNewText(), and mxmlNewTextf() incorrectly required
a parent node (STR #22)
- Fixed an XML output bug in mxmldoc.
- The "make install" target now uses the install command
to set the proper permissions on UNIX/Linux/OSX.
- Fixed a MingW/Cygwin compilation problem (STR #18)
CHANGES IN Mini-XML 2.2
- Added shared library support (STR #17)
- mxmlLoad*() now returns an error when an XML stream
contains illegal control characters (STR #10)
- mxmlLoad*() now returns an error when an element
contains two attributes with the same name in
conformance with the XML spec (STR #16)
- Added support for CDATA (STR #14, STR #15)
- Updated comment and processing instruction handling -
no entity support per XML specification.
- Added checking for invalid comment termination ("--->"
is not allowed)
CHANGES IN Mini-XML 2.1
- Added support for custom data nodes (STR #6)
- Now treat UTF-8 sequences which are longer than
necessary as an error (STR #4)
- Fixed entity number support (STR #8)
- Fixed mxmlLoadString() bug with UTF-8 (STR #7)
- Fixed entity lookup bug (STR #5)
- Added mxmlLoadFd() and mxmlSaveFd() functions.
- Fixed multi-word UTF-16 handling.
CHANGES IN Mini-XML 2.0
- New programmers manual.
- Added Visual C++ project files for Microsoft Windows
users.
- Added optimizations to mxmldoc, mxmlSaveFile(), and
mxmlIndexNew() (STR #2)
- mxmlEntityAddCallback() now returns an integer status
(STR #2)
- Added UTF-16 support (input only; all output is UTF-8)
- Added index functions to build a searchable index of
XML nodes.
- Added character entity callback interface to support
additional character entities beyond those defined in
the XHTML specification.
- Added support for XHTML character entities.
- The mxmldoc utility now produces XML output which
conforms to an updated XML schema, described in the file
"doc/mxmldoc.xsd".
- Changed the whitespace callback interface to return
strings instead of a single character, allowing for
greater control over the formatting of XML files
written using Mini-XML. THIS CHANGE WILL REQUIRE
CHANGES TO YOUR 1.x CODE IF YOU USE WHITESPACE
CALLBACKS.
- The mxmldoc utility is now capable of documenting C++
classes, functions, and structures, and correctly
handles C++ comments.
- Added new modular tests for mxmldoc.
- Updated the mxmldoc output to be more compatible with
embedding in manuals produced with HTMLDOC.
- The makefile incorrectly included a "/" separator
between the destination path and install path. This
caused problems when building and installing with
MingW.
CHANGES IN Mini-XML 1.3
- Fixes for mxmldoc.
- Added support for reading standard HTML entity names.
- mxmlLoadString/File() did not decode character
entities in element names, attribute names, or
attribute values.
- mxmlLoadString/File() would crash when loading non-
conformant XML data under an existing parent (top)
node.
- Fixed several bugs in the mxmldoc utility.
- Added new error callback function to catch a variety
of errors and log them to someplace other than stderr.
- The mxmlElementSetAttr() function now allows for NULL
attribute values.
- The load and save functions now properly handle quoted
element and attribute name strings properly, e.g. for
!DOCTYPE declarations.
CHANGES IN Mini-XML 1.2
- Added new "set" methods to set the value of a node.
- Added new formatted text methods mxmlNewTextf() and
mxmlSetTextf() to create/set a text node value using
printf-style formats.
- Added new standard callbacks for use with the mxmlLoad
functions.
- Updated the HTML documentation to include examples of
the walk and load function output.
- Added --with/without-ansi configure option to control
the strdup() function check.
- Added --with/without-snprintf configure option to
control the snprintf() and vsnprintf() function
checks.
CHANGES IN Mini-XML 1.1.2
- The mxml(3) man page wasn't updated for the string
functions.
- mxmlSaveString() returned the wrong number of
characters.
- mxml_add_char() updated the buffer pointer in the
wrong place.
CHANGES IN Mini-XML 1.1.1
- The private mxml_add_ch() function did not update the
start-of-buffer pointer which could cause a crash when
using mxmlSaveString().
- The private mxml_write_ws() function called putc()
instead of using the proper callback which could cause
a crash when using mxmlSaveString().
- Added a mxmlSaveAllocString() convenience function for
saving an XML node tree to an allocated string.
CHANGES IN Mini-XML 1.1
- The mxmlLoadFile() function now uses dynamically
allocated string buffers for element names, attribute
names, and attribute values. Previously they were
capped at 16383, 255, and 255 bytes, respectively.
- Added a new mxmlLoadString() function for loading an
XML node tree from a string.
- Added a new mxmlSaveString() function for saving an
XML node tree to a string.
- Add emulation of strdup() if the local platform does
not provide the function.
CHANGES IN Mini-XML 1.0
- The mxmldoc program now handles function arguments,
structures, unions, enumerations, classes, and
typedefs properly.
- Documentation provided via mxmldoc and more in-line
comments in the code.
- Added man pages and packaging files.
CHANGES IN Mini-XML 0.93
- New mxmldoc example program that is also used to
create and update code documentation using XML and
produce HTML reference pages.
- Added mxmlAdd() and mxmlRemove() functions to add and
remove nodes from a tree. This provides more
flexibility over where the nodes are inserted and
allows nodes to be moved within the tree as needed.
- mxmlLoadFile() now correctly handles comments.
- mxmlLoadFile() now supports the required "gt", "quot",
and "nbsp" character entities.
- mxmlSaveFile() now uses newlines as whitespace
when valid to do so.
- mxmlFindElement() now also takes attribute name and
attribute value string arguments to limit the search
to specific elements with attributes and/or values.
NULL pointers can be used as "wildcards".
- Added uninstall target to makefile, and auto-reconfig
if Makefile.in or configure.in are changed.
- mxmlFindElement(), mxmlWalkNext(), and mxmlWalkPrev()
now all provide "descend" arguments to control whether
they descend into child nodes in the tree.
- Fixed some whitespace issues in mxmlLoadFile().
- Fixed Unicode output and whitespace issues in
mxmlSaveFile().
- mxmlSaveFile() now supports a whitespace callback to
provide more human-readable XML output under program
control.
CHANGES IN Mini-XML 0.92
- mxmlSaveFile() didn't return a value on success.
CHANGES IN Mini-XML 0.91
- mxmlWalkNext() would go into an infinite loop.
CHANGES IN Mini-XML 0.9
- Initial public release.

View File

@ -1,482 +0,0 @@
GNU LIBRARY GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
[This is the first released version of the library GPL. It is
numbered 2 because it goes with version 2 of the ordinary GPL.]
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
Licenses are intended to guarantee your freedom to share and change
free software--to make sure the software is free for all its users.
This license, the Library General Public License, applies to some
specially designated Free Software Foundation software, and to any
other libraries whose authors decide to use it. You can use it for
your libraries, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if
you distribute copies of the library, or if you modify it.
For example, if you distribute copies of the library, whether gratis
or for a fee, you must give the recipients all the rights that we gave
you. You must make sure that they, too, receive or can get the source
code. If you link a program with the library, you must provide
complete object files to the recipients so that they can relink them
with the library, after making changes to the library and recompiling
it. And you must show them these terms so they know their rights.
Our method of protecting your rights has two steps: (1) copyright
the library, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the library.
Also, for each distributor's protection, we want to make certain
that everyone understands that there is no warranty for this free
library. If the library is modified by someone else and passed on, we
want its recipients to know that what they have is not the original
version, so that any problems introduced by others will not reflect on
the original authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that companies distributing free
software will individually obtain patent licenses, thus in effect
transforming the program into proprietary software. To prevent this,
we have made it clear that any patent must be licensed for everyone's
free use or not licensed at all.
Most GNU software, including some libraries, is covered by the ordinary
GNU General Public License, which was designed for utility programs. This
license, the GNU Library General Public License, applies to certain
designated libraries. This license is quite different from the ordinary
one; be sure to read it in full, and don't assume that anything in it is
the same as in the ordinary license.
The reason we have a separate public license for some libraries is that
they blur the distinction we usually make between modifying or adding to a
program and simply using it. Linking a program with a library, without
changing the library, is in some sense simply using the library, and is
analogous to running a utility program or application program. However, in
a textual and legal sense, the linked executable is a combined work, a
derivative of the original library, and the ordinary General Public License
treats it as such.
Because of this blurred distinction, using the ordinary General
Public License for libraries did not effectively promote software
sharing, because most developers did not use the libraries. We
concluded that weaker conditions might promote sharing better.
However, unrestricted linking of non-free programs would deprive the
users of those programs of all benefit from the free status of the
libraries themselves. This Library General Public License is intended to
permit developers of non-free programs to use free libraries, while
preserving your freedom as a user of such programs to change the free
libraries that are incorporated in them. (We have not seen how to achieve
this as regards changes in header files, but we have achieved it as regards
changes in the actual functions of the Library.) The hope is that this
will lead to faster development of free libraries.
The precise terms and conditions for copying, distribution and
modification follow. Pay close attention to the difference between a
"work based on the library" and a "work that uses the library". The
former contains code derived from the library, while the latter only
works together with the library.
Note that it is possible for a library to be covered by the ordinary
General Public License rather than by this special one.
GNU LIBRARY GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library which
contains a notice placed by the copyright holder or other authorized
party saying it may be distributed under the terms of this Library
General Public License (also called "this License"). Each licensee is
addressed as "you".
A "library" means a collection of software functions and/or data
prepared so as to be conveniently linked with application programs
(which use some of those functions and data) to form executables.
The "Library", below, refers to any such software library or work
which has been distributed under these terms. A "work based on the
Library" means either the Library or any derivative work under
copyright law: that is to say, a work containing the Library or a
portion of it, either verbatim or with modifications and/or translated
straightforwardly into another language. (Hereinafter, translation is
included without limitation in the term "modification".)
"Source code" for a work means the preferred form of the work for
making modifications to it. For a library, complete source code means
all the source code for all modules it contains, plus any associated
interface definition files, plus the scripts used to control compilation
and installation of the library.
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running a program using the Library is not restricted, and output from
such a program is covered only if its contents constitute a work based
on the Library (independent of the use of the Library in a tool for
writing it). Whether that is true depends on what the Library does
and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's
complete source code as you receive it, in any medium, provided that
you conspicuously and appropriately publish on each copy an
appropriate copyright notice and disclaimer of warranty; keep intact
all the notices that refer to this License and to the absence of any
warranty; and distribute a copy of this License along with the
Library.
You may charge a fee for the physical act of transferring a copy,
and you may at your option offer warranty protection in exchange for a
fee.
2. You may modify your copy or copies of the Library or any portion
of it, thus forming a work based on the Library, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices
stating that you changed the files and the date of any change.
c) You must cause the whole of the work to be licensed at no
charge to all third parties under the terms of this License.
d) If a facility in the modified Library refers to a function or a
table of data to be supplied by an application program that uses
the facility, other than as an argument passed when the facility
is invoked, then you must make a good faith effort to ensure that,
in the event an application does not supply such function or
table, the facility still operates, and performs whatever part of
its purpose remains meaningful.
(For example, a function in a library to compute square roots has
a purpose that is entirely well-defined independent of the
application. Therefore, Subsection 2d requires that any
application-supplied function or table used by this function must
be optional: if the application does not supply it, the square
root function must still compute square roots.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Library,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Library, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote
it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Library.
In addition, mere aggregation of another work not based on the Library
with the Library (or with a work based on the Library) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public
License instead of this License to a given copy of the Library. To do
this, you must alter all the notices that refer to this License, so
that they refer to the ordinary GNU General Public License, version 2,
instead of to this License. (If a newer version than version 2 of the
ordinary GNU General Public License has appeared, then you can specify
that version instead if you wish.) Do not make any other change in
these notices.
Once this change is made in a given copy, it is irreversible for
that copy, so the ordinary GNU General Public License applies to all
subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of
the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or
derivative of it, under Section 2) in object code or executable form
under the terms of Sections 1 and 2 above provided that you accompany
it with the complete corresponding machine-readable source code, which
must be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange.
If distribution of object code is made by offering access to copy
from a designated place, then offering equivalent access to copy the
source code from the same place satisfies the requirement to
distribute the source code, even though third parties are not
compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the
Library, but is designed to work with the Library by being compiled or
linked with it, is called a "work that uses the Library". Such a
work, in isolation, is not a derivative work of the Library, and
therefore falls outside the scope of this License.
However, linking a "work that uses the Library" with the Library
creates an executable that is a derivative of the Library (because it
contains portions of the Library), rather than a "work that uses the
library". The executable is therefore covered by this License.
Section 6 states terms for distribution of such executables.
When a "work that uses the Library" uses material from a header file
that is part of the Library, the object code for the work may be a
derivative work of the Library even though the source code is not.
Whether this is true is especially significant if the work can be
linked without the Library, or if the work is itself a library. The
threshold for this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data
structure layouts and accessors, and small macros and small inline
functions (ten lines or less in length), then the use of the object
file is unrestricted, regardless of whether it is legally a derivative
work. (Executables containing this object code plus portions of the
Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may
distribute the object code for the work under the terms of Section 6.
Any executables containing that work also fall under Section 6,
whether or not they are linked directly with the Library itself.
6. As an exception to the Sections above, you may also compile or
link a "work that uses the Library" with the Library to produce a
work containing portions of the Library, and distribute that work
under terms of your choice, provided that the terms permit
modification of the work for the customer's own use and reverse
engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the
Library is used in it and that the Library and its use are covered by
this License. You must supply a copy of this License. If the work
during execution displays copyright notices, you must include the
copyright notice for the Library among them, as well as a reference
directing the user to the copy of this License. Also, you must do one
of these things:
a) Accompany the work with the complete corresponding
machine-readable source code for the Library including whatever
changes were used in the work (which must be distributed under
Sections 1 and 2 above); and, if the work is an executable linked
with the Library, with the complete machine-readable "work that
uses the Library", as object code and/or source code, so that the
user can modify the Library and then relink to produce a modified
executable containing the modified Library. (It is understood
that the user who changes the contents of definitions files in the
Library will not necessarily be able to recompile the application
to use the modified definitions.)
b) Accompany the work with a written offer, valid for at
least three years, to give the same user the materials
specified in Subsection 6a, above, for a charge no more
than the cost of performing this distribution.
c) If distribution of the work is made by offering access to copy
from a designated place, offer equivalent access to copy the above
specified materials from the same place.
d) Verify that the user has already received a copy of these
materials or that you have already sent this user a copy.
For an executable, the required form of the "work that uses the
Library" must include any data and utility programs needed for
reproducing the executable from it. However, as a special exception,
the source code distributed need not include anything that is normally
distributed (in either source or binary form) with the major
components (compiler, kernel, and so on) of the operating system on
which the executable runs, unless that component itself accompanies
the executable.
It may happen that this requirement contradicts the license
restrictions of other proprietary libraries that do not normally
accompany the operating system. Such a contradiction means you cannot
use both them and the Library together in an executable that you
distribute.
7. You may place library facilities that are a work based on the
Library side-by-side in a single library together with other library
facilities not covered by this License, and distribute such a combined
library, provided that the separate distribution of the work based on
the Library and of the other library facilities is otherwise
permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work
based on the Library, uncombined with any other library
facilities. This must be distributed under the terms of the
Sections above.
b) Give prominent notice with the combined library of the fact
that part of it is a work based on the Library, and explaining
where to find the accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute
the Library except as expressly provided under this License. Any
attempt otherwise to copy, modify, sublicense, link with, or
distribute the Library is void, and will automatically terminate your
rights under this License. However, parties who have received copies,
or rights, from you under this License will not have their licenses
terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Library or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Library (or any work based on the
Library), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Library or works based on it.
10. Each time you redistribute the Library (or any work based on the
Library), the recipient automatically receives a license from the
original licensor to copy, distribute, link with or modify the Library
subject to these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.
11. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Library at all. For example, if a patent
license would not permit royalty-free redistribution of the Library by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any
particular circumstance, the balance of the section is intended to apply,
and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Library under this License may add
an explicit geographical distribution limitation excluding those countries,
so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if
written in the body of this License.
13. The Free Software Foundation may publish revised and/or new
versions of the Library General Public License from time to time.
Such new versions will be similar in spirit to the present version,
but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library
specifies a version number of this License which applies to it and
"any later version", you have the option of following the terms and
conditions either of that version or of any later version published by
the Free Software Foundation. If the Library does not specify a
license version number, you may choose any version ever published by
the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free
programs whose distribution conditions are incompatible with these,
write to the author to ask for permission. For software which is
copyrighted by the Free Software Foundation, write to the Free
Software Foundation; we sometimes make exceptions for this. Our
decision will be guided by the two goals of preserving the free status
of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
END OF TERMS AND CONDITIONS
Appendix: How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest
possible use to the public, we recommend making it free software that
everyone can redistribute and change. You can do so by permitting
redistribution under these terms (or, alternatively, under the terms of the
ordinary General Public License).
To apply these terms, attach the following notices to the library. It is
safest to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least the
"copyright" line and a pointer to where the full notice is found.
<one line to give the library's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Library General Public
License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Library General Public License for more details.
You should have received a copy of the GNU Library General Public
License along with this library; if not, write to the Free
Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the library, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the
library `Frob' (a library for tweaking knobs) written by James Random Hacker.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
That's all there is to it!

View File

@ -1,342 +0,0 @@
#
# "$Id: Makefile.in 23382 2006-04-29 15:44:02Z russell $"
#
# Makefile for Mini-XML, a small XML-like file parsing library.
#
# Copyright 2003-2005 by Michael Sweet.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU Library General Public
# License as published by the Free Software Foundation; either
# version 2, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
#
# Compiler tools definitions...
#
AR = @AR@
ARFLAGS = @ARFLAGS@
CC = @CC@
CFLAGS = $(OPTIM) @CFLAGS@ @CPPFLAGS@
CP = @CP@
DSO = @DSO@
DSOFLAGS = @DSOFLAGS@
LDFLAGS = $(OPTIM) @LDFLAGS@
INSTALL = @INSTALL@
LIBMXML = @LIBMXML@
LN = @LN@ -s
MKDIR = @MKDIR@
OPTIM = @OPTIM@
RANLIB = @RANLIB@
RM = @RM@ -f
SHELL = /bin/sh
#
# Configured directories...
#
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
includedir = @includedir@
libdir = @libdir@
mandir = @mandir@
docdir = @docdir@
datarootdir = @datarootdir@
BUILDROOT = $(DSTROOT)
#
# Install commands...
#
INSTALL_BIN = $(LIBTOOL) $(INSTALL) -m 755 -s
INSTALL_DATA = $(INSTALL) -m 644
INSTALL_DIR = $(INSTALL) -d
INSTALL_LIB = $(LIBTOOL) $(INSTALL) -m 755
INSTALL_MAN = $(INSTALL) -m 644
INSTALL_SCRIPT = $(INSTALL) -m 755
#
# Rules...
#
.SUFFIXES: .0 .1 .3 .c .man .o
.c.o:
$(CC) $(CFLAGS) -c $<
.man.0 .man.1 .man.3:
$(RM) $@
$(NROFF) -man $< >$@
#
# Targets...
#
DOCFILES = doc/mxml.html doc/mxmldoc.xsd \
README COPYING CHANGES
PUBLIBOBJS = mxml-attr.o mxml-entity.o mxml-file.o mxml-index.o \
mxml-node.o mxml-search.o mxml-set.o
LIBOBJS = $(PUBLIBOBJS) mxml-private.o mxml-string.o
OBJS = mxmldoc.o testmxml.o $(LIBOBJS)
TARGETS = $(LIBMXML) mxmldoc testmxml mxml.xml
#
# Make everything...
#
all: Makefile configure config.h $(TARGETS)
#
# Clean everything...
#
clean:
$(RM) $(OBJS) $(TARGETS)
$(RM) mxmldoc-static libmxml.a
$(RM) *.bck *.bak
$(RM) config.cache config.log config.status config.h
$(RM) -r autom4te*.cache
distclean: clean
$(RM) mxml.list Makefile
#
# Install everything...
#
install: $(TARGETS) install-$(LIBMXML) install-libmxml.a
$(INSTALL_DIR) $(BUILDROOT)$(bindir)
$(INSTALL_BIN) mxmldoc $(BUILDROOT)$(bindir)
$(INSTALL_DIR) $(BUILDROOT)$(docdir)
for file in $(DOCFILES); do \
$(INSTALL_MAN) $$file $(BUILDROOT)$(docdir); \
done
$(INSTALL_DIR) $(BUILDROOT)$(includedir)
$(INSTALL_DATA) mxml.h $(BUILDROOT)$(includedir)
$(INSTALL_DIR) $(BUILDROOT)$(libdir)/pkgconfig
$(INSTALL_DATA) mxml.pc $(BUILDROOT)$(libdir)/pkgconfig
$(INSTALL_DIR) $(BUILDROOT)$(mandir)/cat1
$(INSTALL_MAN) doc/mxmldoc.$(CAT1EXT) $(BUILDROOT)$(mandir)/cat1/mxmldoc.$(CAT1EXT)
$(INSTALL_DIR) $(BUILDROOT)$(mandir)/cat3
$(INSTALL_MAN) doc/mxml.$(CAT3EXT) $(BUILDROOT)$(mandir)/cat3/mxml.$(CAT3EXT)
$(INSTALL_DIR) $(BUILDROOT)$(mandir)/man1
$(INSTALL_MAN) doc/mxmldoc.man $(BUILDROOT)$(mandir)/man1/mxmldoc.$(MAN1EXT)
$(INSTALL_DIR) $(BUILDROOT)$(mandir)/man3
$(INSTALL_MAN) doc/mxml.man $(BUILDROOT)$(mandir)/man3/mxml.$(MAN3EXT)
install-libmxml.a:
$(INSTALL_DIR) $(BUILDROOT)$(libdir)
$(INSTALL_LIB) libmxml.a $(BUILDROOT)$(libdir)
install-libmxml.so.1.0:
$(INSTALL_DIR) $(BUILDROOT)$(libdir)
$(INSTALL_LIB) libmxml.so.1.0 $(BUILDROOT)$(libdir)
$(RM) $(BUILDROOT)$(libdir)/libmxml.so
$(LN) libmxml.so.1.0 $(BUILDROOT)$(libdir)/libmxml.so
$(RM) $(BUILDROOT)$(libdir)/libmxml.so.1
$(LN) libmxml.so.1.0 $(BUILDROOT)$(libdir)/libmxml.so.1
install-libmxml.sl.1:
$(INSTALL_DIR) $(BUILDROOT)$(libdir)
$(INSTALL_LIB) libmxml.sl.1 $(BUILDROOT)$(libdir)
$(RM) $(BUILDROOT)$(libdir)/libmxml.so
$(LN) libmxml.sl.1 $(BUILDROOT)$(libdir)/libmxml.sl
install-libmxml.1.dylib:
$(INSTALL_DIR) $(BUILDROOT)$(libdir)
$(INSTALL_LIB) libmxml.1.dylib $(BUILDROOT)$(libdir)
$(RM) $(BUILDROOT)$(libdir)/libmxml.dylib
$(LN) libmxml.1.dylib $(BUILDROOT)$(libdir)/libmxml.dylib
#
# Uninstall everything...
#
uninstall: uninstall-$(LIBMXML) uninstall-libmxml.a
$(RM) $(BUILDROOT)$(bindir)/mxmldoc
$(RM) -r $(BUILDROOT)$(docdir)
$(RM) $(BUILDROOT)$(includedir)/mxml.h
$(RM) $(BUILDROOT)$(libdir)/pkgconfig/mxml.pc
$(RM) $(BUILDROOT)$(mandir)/cat1/mxmldoc.$(CAT1EXT)
$(RM) $(BUILDROOT)$(mandir)/cat3/mxml.$(CAT3EXT)
$(RM) $(BUILDROOT)$(mandir)/man1/mxmldoc.$(MAN1EXT)
$(RM) $(BUILDROOT)$(mandir)/man3/mxml.$(MAN3EXT)
uninstall-libmxml.a:
$(RM) $(BUILDROOT)$(libdir)/libmxml.a
uninstall-libmxml.so.1.0:
$(RM) $(BUILDROOT)$(libdir)/libmxml.so
$(RM) $(BUILDROOT)$(libdir)/libmxml.so.1
$(RM) $(BUILDROOT)$(libdir)/libmxml.so.1.0
uninstall-libmxml.sl.1:
$(RM) $(BUILDROOT)$(libdir)/libmxml.sl
$(RM) $(BUILDROOT)$(libdir)/libmxml.sl.1
uninstall-libmxml.1.dylib:
$(RM) $(BUILDROOT)$(libdir)/libmxml.dylib
$(RM) $(BUILDROOT)$(libdir)/libmxml.1.dylib
#
# Make packages using EPM (http://www.easysw.com/epm/)
#
epm: all
epm --output-dir dist -v -f native mxml
epm --output-dir dist -v -f portable mxml
#
# autoconf stuff...
#
Makefile: Makefile.in
if test -f config.status; then \
./config.status --recheck; \
./config.status; \
else \
./configure; \
fi
touch config.h
config.h: configure config.h.in
if test -f config.status; then \
./config.status --recheck; \
./config.status; \
else \
./configure; \
fi
touch config.h
#
# libmxml.a
#
libmxml.a: $(LIBOBJS)
$(RM) $@
$(AR) $(ARFLAGS) $@ $(LIBOBJS)
$(RANLIB) $@
$(LIBOBJS): mxml.h
#
# libmxml.so.1.0
#
libmxml.so.1.0: $(LIBOBJS)
$(DSO) $(DSOFLAGS) -o libmxml.so.1.0 $(LIBOBJS)
$(RM) libmxml.so libmxml.so.1
$(LN) libmxml.so.1.0 libmxml.so
$(LN) libmxml.so.1.0 libmxml.so.1
#
# libmxml.sl.1
#
libmxml.sl.1: $(LIBOBJS)
$(DSO) $(DSOFLAGS) -o libmxml.sl.1 $(LIBOBJS)
$(RM) libmxml.sl libmxml.sl.1
$(LN) libmxml.sl.1 libmxml.sl
#
# libmxml.1.dylib
#
libmxml.1.dylib: $(LIBOBJS)
$(DSO) $(DSOFLAGS) -o libmxml.1.dylib \
-install_name $(libdir)/libmxml.dylib \
-current_version 1.0.0 \
-compatibility_version 1.0.0 \
$(LIBOBJS)
$(RM) libmxml.dylib libmxml.1.dylib
$(LN) libmxml.1.dylib libmxml.dylib
#
# mxmldoc
#
mxmldoc: $(LIBMXML) mxmldoc.o
$(CC) $(LDFLAGS) -o $@ mxmldoc.o -L. -lmxml
mxmldoc-static: libmxml.a mxmldoc.o
$(CC) $(LDFLAGS) -o $@ mxmldoc.o libmxml.a
mxmldoc.o: mxml.h
#
# testmxml
#
testmxml: libmxml.a testmxml.o
$(CC) $(LDFLAGS) -o $@ testmxml.o libmxml.a
@echo Testing library...
./testmxml test.xml >temp1.xml 2>temp1s.xml
./testmxml temp1.xml >temp2.xml 2>temp2s.xml
@if cmp temp1.xml temp2.xml; then \
echo Stdio file test passed!; \
$(RM) temp2.xml temp2s.xml; \
else \
echo Stdio file test failed!; \
fi
@if cmp temp1.xml temp1s.xml; then \
echo String test passed!; \
$(RM) temp1.xml temp1s.xml; \
else \
echo String test failed!; \
fi
@if cmp test.xml test.xmlfd; then \
echo File descriptor test passed!; \
$(RM) test.xmlfd; \
else \
echo File descriptor test failed!; \
fi
testmxml.o: mxml.h
#
# mxml.xml
#
mxml.xml: mxmldoc-static mxml.h $(PUBLIBOBJS:.o=.c)
$(RM) mxml.xml
./mxmldoc-static mxml.xml mxml.h $(PUBLIBOBJS:.o=.c) >doc/reference.html
valgrind: mxmldoc-static
$(RM) valgrind.xml
valgrind --tool=memcheck --leak-check=yes ./mxmldoc-static \
valgrind.xml mxml.h $(PUBLIBOBJS:.o=.c) \
>valgrind.html 2>valgrind.out
#
# All object files depend on the makefile...
#
$(OBJS): Makefile config.h
#
# End of "$Id: Makefile.in 23382 2006-04-29 15:44:02Z russell $".
#

View File

@ -1,204 +0,0 @@
README - 05/19/2005
-------------------
INTRODUCTION
This README file describes the Mini-XML library version
2.2.2.
Mini-XML is a small XML parsing library that you can use to
read XML and XML-like data files in your application without
requiring large non-standard libraries. Mini-XML only
requires an ANSI C compatible compiler (GCC works, as do
most vendors' ANSI C compilers) and a "make" program.
Mini-XML provides the following functionality:
- Reading of UTF-8 and UTF-16 and writing of UTF-8
encoded XML files and strings.
- Data is stored in a linked-list tree structure,
preserving the XML data hierarchy.
- Supports arbitrary element names, attributes, and
attribute values with no preset limits, just available
memory.
- Supports integer, real, opaque ("cdata"), and text
data types in "leaf" nodes.
- Functions for creating and managing trees of data.
- "Find" and "walk" functions for easily locating and
navigating trees of data.
Mini-XML doesn't do validation or other types of processing
on the data based upon schema files or other sources of
definition information.
BUILDING Mini-XML
Mini-XML comes with an autoconf-based configure script; just
type the following command to get things going:
./configure
The default install prefix is /usr/local, which can be
overridden using the --prefix option:
./configure --prefix=/foo
Other configure options can be found using the --help
option:
./configure --help
Once you have configured the software, type "make" to do the
build and run the test program to verify that things are
working, as follows:
make
If you are using Mini-XML under Microsoft Windows with
Visual C++, use the included project files in the "vcnet"
subdirectory to build the library instead.
INSTALLING Mini-XML
The "install" target will install Mini-XML in the lib and
include directories:
make install
Once you have installed it, use the "-lmxml" option to link
your application against it.
DOCUMENTATION
The documentation is available in the "doc" subdirectory in
the files "mxml.html" (HTML) and "mxml.pdf" (PDF). You can
also look at the "testmxml.c" and "mxmldoc.c" source files
for examples of using Mini-XML.
Mini-XML provides a single header file which you include:
#include <mxml.h>
Nodes are defined by the "mxml_node_t" structure; the "type"
member defines the node type (element, integer, opaque,
real, or text) which determines which value you want to look
at in the "value" union. New nodes can be created using the
"mxmlNewElement()", "mxmlNewInteger()", "mxmlNewOpaque()",
"mxmlNewReal()", and "mxmlNewText()" functions. Only
elements can have child nodes, and the top node must be an
element, usually "?xml".
You load an XML file using the "mxmlLoadFile()" function:
FILE *fp;
mxml_node_t *tree;
fp = fopen("filename.xml", "r");
tree = mxmlLoadFile(NULL, fp, MXML_NO_CALLBACK);
fclose(fp);
Similarly, you save an XML file using the "mxmlSaveFile()"
function:
FILE *fp;
mxml_node_t *tree;
fp = fopen("filename.xml", "w");
mxmlSaveFile(tree, fp, MXML_NO_CALLBACK);
fclose(fp);
The "mxmlLoadString()", "mxmlSaveAllocString()", and
"mxmlSaveString()" functions load XML node trees from and
save XML node trees to strings:
char buffer[8192];
char *ptr;
mxml_node_t *tree;
...
tree = mxmlLoadString(NULL, buffer, MXML_NO_CALLBACK);
...
mxmlSaveString(tree, buffer, sizeof(buffer), MXML_NO_CALLBACK);
...
ptr = mxmlSaveAllocString(tree, MXML_NO_CALLBACK);
You can find a named element/node using the
"mxmlFindElement()" function:
mxml_node_t *node = mxmlFindElement(tree, tree, "name", "attr",
"value", MXML_DESCEND);
The "name", "attr", and "value" arguments can be passed as
NULL to act as wildcards, e.g.:
/* Find the first "a" element */
node = mxmlFindElement(tree, tree, "a", NULL, NULL, MXML_DESCEND);
/* Find the first "a" element with "href" attribute */
node = mxmlFindElement(tree, tree, "a", "href", NULL, MXML_DESCEND);
/* Find the first "a" element with "href" to a URL */
node = mxmlFindElement(tree, tree, "a", "href",
"http://www.easysw.com/~mike/mxml/",
MXML_DESCEND);
/* Find the first element with a "src" attribute*/
node = mxmlFindElement(tree, tree, NULL, "src", NULL, MXML_DESCEND);
/* Find the first element with a "src" = "foo.jpg" */
node = mxmlFindElement(tree, tree, NULL, "src", "foo.jpg",
MXML_DESCEND);
You can also iterate with the same function:
mxml_node_t *node;
for (node = mxmlFindElement(tree, tree, "name", NULL, NULL,
MXML_DESCEND);
node != NULL;
node = mxmlFindElement(node, tree, "name", NULL, NULL,
MXML_DESCEND))
{
... do something ...
}
Finally, once you are done with the XML data, use the
"mxmlDelete()" function to recursively free the memory that
is used for a particular node or the entire tree:
mxmlDelete(tree);
GETTING HELP AND REPORTING PROBLEMS
You can email me at "mxml@easysw.com" to report problems
and/or ask for help. Just don't expect an instant response,
as I get a *lot* of email...
LEGAL STUFF
The Mini-XML library is Copyright 2003-2005 by Michael Sweet.
This library is free software; you can redistribute it
and/or modify it under the terms of the GNU Library General
Public License as published by the Free Software Foundation;
either version 2 of the License, or (at your option) any
later version.
This library is distributed in the hope that it will be
useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. See the GNU Library General Public License for
more details.
You should have received a copy of the GNU Library General
Public License along with this library; if not, write to the
Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
02139, USA.

View File

@ -1,69 +0,0 @@
/*
* "$Id: config.h.in 22267 2006-04-24 17:11:45Z kpfleming $"
*
* Configuration file for Mini-XML, a small XML-like file parsing library.
*
* Copyright 2003-2005 by Michael Sweet.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/*
* Include necessary headers...
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <stdarg.h>
#include <ctype.h>
/*
* Version number...
*/
#define MXML_VERSION ""
/*
* Do we have the vsnprintf() function?
*/
#undef HAVE_VSNPRINTF
/*
* Do we have the strXXX() functions?
*/
#undef HAVE_STRDUP
/*
* Define prototypes for string functions as needed...
*/
# ifndef HAVE_STRDUP
extern char *mxml_strdup(const char *);
# define strdup mxml_strdup
# endif /* !HAVE_STRDUP */
extern char *mxml_strdupf(const char *, va_list);
# ifndef HAVE_VSNPRINTF
extern int mxml_vsnprintf(char *, size_t, const char *, va_list);
# define vsnprintf mxml_vsnprintf
# endif /* !HAVE_VSNPRINTF */
/*
* End of "$Id: config.h.in 22267 2006-04-24 17:11:45Z kpfleming $".
*/

File diff suppressed because it is too large Load Diff

View File

@ -1,343 +0,0 @@
dnl
dnl "$Id: configure.in 260 2010-04-27 19:11:06Z qwell $"
dnl
dnl Configuration script for Mini-XML, a small XML-like file parsing library.
dnl
dnl Copyright 2003-2009 by Michael Sweet.
dnl
dnl This program is free software; you can redistribute it and/or
dnl modify it under the terms of the GNU Library General Public
dnl License as published by the Free Software Foundation; either
dnl version 2, or (at your option) any later version.
dnl
dnl This program is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
dnl GNU General Public License for more details.
dnl
dnl Specify a source file from the distribution...
AC_INIT(mxml.h)
dnl Set the name of the config header file...
AC_CONFIG_HEADER(config.h)
dnl Version number...
VERSION=2.2.2
AC_SUBST(VERSION)
AC_DEFINE_UNQUOTED(MXML_VERSION, "Mini-XML v$VERSION")
dnl Clear default debugging options and set normal optimization by
dnl default unless the user asks for debugging specifically.
CFLAGS="${CFLAGS:=}"
CXXFLAGS="${CXXFLAGS:=}"
LDFLAGS="${LDFLAGS:=}"
AC_SUBST(LDFLAGS)
OPTIM=""
AC_SUBST(OPTIM)
AC_ARG_WITH(ansi, [ --with-ansi set full ANSI C mode, default=no],
use_ansi="$withval",
use_ansi="no")
AC_ARG_WITH(archflags, [ --with-archflags set additional architecture flags, default=none],
ARCHFLAGS="$withval",
ARCHFLAGS="")
AC_SUBST(ARCHFLAGS)
AC_ARG_ENABLE(debug, [ --enable-debug turn on debugging, default=no],
if eval "test x$enable_debug = xyes"; then
OPTIM="-g"
fi)
AC_ARG_WITH(docdir, [ --with-docdir set directory for documentation, default=${prefix}/share/doc/mxml],
docdir="$withval",
docdir="NONE")
AC_SUBST(docdir)
AC_ARG_WITH(vsnprintf, [ --with-vsnprintf use vsnprintf emulation functions, default=auto],
use_vsnprintf="$withval",
use_vsnprintf="no")
dnl Get the operating system and version number...
uname=`uname`
uversion=`uname -r | sed -e '1,$s/[[^0-9]]//g'`
if test x$uname = xIRIX64; then
uname="IRIX"
fi
dnl Checks for programs...
AC_PROG_CC
AC_PROG_CXX
AC_PROG_INSTALL
if test "$INSTALL" = "$ac_install_sh"; then
# Use full path to install-sh script...
INSTALL="`pwd`/install-sh -c"
fi
AC_PROG_RANLIB
AC_PATH_PROGS(AR,ar gar)
AC_PATH_PROG(CP,cp)
AC_PATH_PROG(LN,ln)
AC_PATH_PROG(MKDIR,mkdir)
AC_PATH_PROG(RM,rm)
if test -z $AR ; then
AC_MSG_ERROR('ar' binary is mandatory. Please either install the 'ar' binary or provide the path to configure with --with-ar=/path/to/ar)
fi
dnl Flags for "ar" command...
case "$uname" in
Darwin* | *BSD*)
ARFLAGS="-rcv"
;;
*)
ARFLAGS="crvs"
;;
esac
AC_SUBST(ARFLAGS)
dnl Inline functions...
AC_C_INLINE
dnl Checks for string functions.
if test "x$use_ansi" != xyes; then
AC_CHECK_FUNCS(strdup)
fi
if test "x$use_vsnprintf" != xyes; then
AC_CHECK_FUNCS(snprintf vsnprintf)
fi
dnl Check for "long long" support...
AC_CACHE_CHECK(for long long int, ac_cv_c_long_long,
[if test "$GCC" = yes; then
ac_cv_c_long_long=yes
else
AC_TRY_COMPILE(,[long long int i;],
ac_cv_c_long_long=yes,
ac_cv_c_long_long=no)
fi])
if test $ac_cv_c_long_long = yes; then
AC_DEFINE(HAVE_LONG_LONG)
fi
dnl Threading support
AC_ARG_ENABLE(threads, [ --enable-threads enable multi-threading support])
have_pthread=no
PTHREAD_FLAGS=""
PTHREAD_LIBS=""
if test "x$enable_threads" != xno; then
AC_CHECK_HEADER(pthread.h, AC_DEFINE(HAVE_PTHREAD_H))
if test x$ac_cv_header_pthread_h = xyes; then
dnl Check various threading options for the platforms we support
for flag in -lpthreads -lpthread -pthread; do
AC_MSG_CHECKING([for pthread_create using $flag])
SAVELIBS="$LIBS"
LIBS="$flag $LIBS"
AC_TRY_LINK([#include <pthread.h>],
[pthread_create(0, 0, 0, 0);],
have_pthread=yes)
AC_MSG_RESULT([$have_pthread])
LIBS="$SAVELIBS"
if test $have_pthread = yes; then
PTHREAD_FLAGS="-D_THREAD_SAFE -D_REENTRANT"
PTHREAD_LIBS="$flag"
# Solaris requires -D_POSIX_PTHREAD_SEMANTICS to
# be POSIX-compliant... :(
if test $uname = SunOS; then
PTHREAD_FLAGS="$PTHREAD_FLAGS -D_POSIX_PTHREAD_SEMANTICS"
fi
break
fi
done
fi
fi
AC_SUBST(PTHREAD_FLAGS)
AC_SUBST(PTHREAD_LIBS)
dnl Shared library support...
DSO="${DSO:=:}"
DSOFLAGS="${DSOFLAGS:=}"
AC_ARG_ENABLE(shared, [ --enable-shared turn on shared libraries, default=no])
if test x$enable_shared = xyes; then
AC_MSG_CHECKING(for shared library support)
PICFLAG=1
case "$uname" in
SunOS* | UNIX_S*)
AC_MSG_RESULT(yes)
LIBMXML="libmxml.so.1.4"
DSO="\$(CC)"
DSOFLAGS="$DSOFLAGS -Wl,-h,libmxml.so.1 -G -R\$(libdir) \$(OPTIM)"
LDFLAGS="$LDFLAGS -R\$(libdir)"
;;
HP-UX*)
AC_MSG_RESULT(yes)
LIBMXML="libmxml.sl.1"
DSO="ld"
DSOFLAGS="$DSOFLAGS -b -z +h libmxml.sl.1 +s +b \$(libdir)"
LDFLAGS="$LDFLAGS -Wl,+s,+b,\$(libdir)"
;;
IRIX)
AC_MSG_RESULT(yes)
LIBMXML="libmxml.so.1.4"
DSO="\$(CC)"
DSOFLAGS="$DSOFLAGS -Wl,-rpath,\$(libdir),-set_version,sgi1.0,-soname,libmxml.so.1 -shared \$(OPTIM)"
;;
OSF1* | Linux | GNU)
AC_MSG_RESULT(yes)
LIBMXML="libmxml.so.1.4"
DSO="\$(CC)"
DSOFLAGS="$DSOFLAGS -Wl,-soname,libmxml.so.1,-rpath,\$(libdir) -shared \$(OPTIM)"
LDFLAGS="$LDFLAGS -Wl,-rpath,\$(libdir)"
;;
*BSD*)
AC_MSG_RESULT(yes)
LIBMXML="libmxml.so.1.4"
DSO="\$(CC)"
DSOFLAGS="$DSOFLAGS -Wl,-soname,libmxml.so.1,-R\$(libdir) -shared \$(OPTIM)"
LDFLAGS="$LDFLAGS -Wl,-R\$(libdir)"
;;
Darwin*)
AC_MSG_RESULT(yes)
LIBMXML="libmxml.1.dylib"
DSO="\$(CC)"
DSOFLAGS="$DSOFLAGS \$(RC_CFLAGS) -dynamiclib -lc"
;;
*)
AC_MSG_RESULT(no)
AC_MSG_WARN(shared libraries not supported on this platform.)
PICFLAG=0
LIBMXML="libmxml.a"
;;
esac
else
PICFLAG=0
LIBMXML="libmxml.a"
fi
AC_SUBST(DSO)
AC_SUBST(DSOFLAGS)
AC_SUBST(LIBMXML)
AC_SUBST(PICFLAG)
dnl Add -Wall for GCC...
if test -n "$GCC"; then
CFLAGS="-Wall $CFLAGS"
if test "x$OPTIM" = x; then
OPTIM="-Os -g"
fi
if test "x$use_ansi" = xyes; then
CFLAGS="-ansi -pedantic $CFLAGS"
fi
if test $PICFLAG = 1 -a $uname != AIX; then
OPTIM="-fPIC $OPTIM"
fi
else
case $uname in
HP-UX*)
CFLAGS="-Ae $CFLAGS"
if test "x$OPTIM" = x; then
OPTIM="-O"
fi
OPTIM="+DAportable $OPTIM"
if test $PICFLAG = 1; then
OPTIM="+z $OPTIM"
fi
;;
UNIX_SVR* | SunOS*)
if test "x$OPTIM" = x; then
OPTIM="-O"
fi
if test $PICFLAG = 1; then
OPTIM="-KPIC $OPTIM"
fi
;;
*)
if test "x$OPTIM" = x; then
OPTIM="-O"
fi
;;
esac
fi
dnl Fix "prefix" variable if it hasn't been specified...
if test "$prefix" = "NONE"; then
prefix="/usr/local"
fi
dnl Fix "exec_prefix" variable if it hasn't been specified...
if test "$exec_prefix" = "NONE"; then
exec_prefix="$prefix"
fi
dnl Fix "docdir" variable if it hasn't been specified...
if test "$docdir" = "NONE"; then
docdir="$datadir/doc/mxml"
fi
dnl Fix "mandir" variable if it hasn't been specified...
if test "$mandir" = "\${prefix}/man" -a "$prefix" = "/usr"; then
case "$uname" in
*BSD* | Darwin* | Linux*)
# BSD, Darwin (MacOS X), and Linux
mandir="/usr/share/man"
;;
IRIX*)
# SGI IRIX
mandir="/usr/share/catman/u_man"
;;
*)
# All others
mandir="/usr/man"
;;
esac
fi
dnl pkg-config stuff...
if test "$includedir" != /usr/include; then
PC_CFLAGS="-I$includedir"
else
PC_CFLAGS=""
fi
if test "$libdir" != /usr/lib; then
PC_LIBS="-L$libdir -lmxml"
else
PC_LIBS="-lmxml"
fi
AC_SUBST(PC_CFLAGS)
AC_SUBST(PC_LIBS)
dnl Output the makefile, etc...
AC_OUTPUT(Makefile mxml.list mxml.pc)
dnl
dnl End of "$Id: configure.in 260 2010-04-27 19:11:06Z qwell $".
dnl

View File

@ -1,251 +0,0 @@
#!/bin/sh
#
# install - install a program, script, or datafile
# This comes from X11R5 (mit/util/scripts/install.sh).
#
# Copyright 1991 by the Massachusetts Institute of Technology
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of M.I.T. not be used in advertising or
# publicity pertaining to distribution of the software without specific,
# written prior permission. M.I.T. makes no representations about the
# suitability of this software for any purpose. It is provided "as is"
# without express or implied warranty.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""
while [ x"$1" != x ]; do
case $1 in
-c) instcmd="$cpprog"
shift
continue;;
-d) dir_arg=true
shift
continue;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
-s) stripcmd="$stripprog"
shift
continue;;
-t=*) transformarg=`echo $1 | sed 's/-t=//'`
shift
continue;;
-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
shift
continue;;
*) if [ x"$src" = x ]
then
src=$1
else
# this colon is to work around a 386BSD /bin/sh bug
:
dst=$1
fi
shift
continue;;
esac
done
if [ x"$src" = x ]
then
echo "install: no input file specified"
exit 1
else
:
fi
if [ x"$dir_arg" != x ]; then
dst=$src
src=""
if [ -d $dst ]; then
instcmd=:
chmodcmd=""
else
instcmd=$mkdirprog
fi
else
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if [ -f $src -o -d $src ]
then
:
else
echo "install: $src does not exist"
exit 1
fi
if [ x"$dst" = x ]
then
echo "install: no destination specified"
exit 1
else
:
fi
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
if [ -d $dst ]
then
dst="$dst"/`basename $src`
else
:
fi
fi
## this sed command emulates the dirname command
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# this part is taken from Noah Friedman's mkinstalldirs script
# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-${defaultIFS}}"
oIFS="${IFS}"
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS="${oIFS}"
pathcomp=''
while [ $# -ne 0 ] ; do
pathcomp="${pathcomp}${1}"
shift
if [ ! -d "${pathcomp}" ] ;
then
$mkdirprog "${pathcomp}"
else
:
fi
pathcomp="${pathcomp}/"
done
fi
if [ x"$dir_arg" != x ]
then
$doit $instcmd $dst &&
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi
else
# If we're going to rename the final executable, determine the name now.
if [ x"$transformarg" = x ]
then
dstfile=`basename $dst`
else
dstfile=`basename $dst $transformbasename |
sed $transformarg`$transformbasename
fi
# don't allow the sed command to completely eliminate the filename
if [ x"$dstfile" = x ]
then
dstfile=`basename $dst`
else
:
fi
# Make a temp file name in the proper directory.
dsttmp=$dstdir/#inst.$$#
# Move or copy the file name to the temp name
$doit $instcmd $src $dsttmp &&
trap "rm -f ${dsttmp}" 0 &&
# and set any options; do chmod last to preserve setuid bits
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi &&
# Now rename the file to the real destination.
$doit $rmcmd -f $dstdir/$dstfile &&
$doit $mvcmd $dsttmp $dstdir/$dstfile
fi &&
exit 0

View File

@ -1,181 +0,0 @@
/*
* "$Id: mxml-attr.c 22267 2006-04-24 17:11:45Z kpfleming $"
*
* Attribute support code for Mini-XML, a small XML-like file parsing library.
*
* Copyright 2003-2005 by Michael Sweet.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Contents:
*
* mxmlElementGetAttr() - Get an attribute.
* mxmlElementSetAttr() - Set an attribute.
*/
/*
* Include necessary headers...
*/
#include "config.h"
#include "mxml.h"
/*
* 'mxmlElementGetAttr()' - Get an attribute.
*
* This function returns NULL if the node is not an element or the
* named attribute does not exist.
*/
const char * /* O - Attribute value or NULL */
mxmlElementGetAttr(mxml_node_t *node, /* I - Element node */
const char *name) /* I - Name of attribute */
{
int i; /* Looping var */
mxml_attr_t *attr; /* Cirrent attribute */
#ifdef DEBUG
fprintf(stderr, "mxmlElementGetAttr(node=%p, name=\"%s\")\n",
node, name ? name : "(null)");
#endif /* DEBUG */
/*
* Range check input...
*/
if (!node || node->type != MXML_ELEMENT || !name)
return (NULL);
/*
* Look for the attribute...
*/
for (i = node->value.element.num_attrs, attr = node->value.element.attrs;
i > 0;
i --, attr ++)
if (!strcmp(attr->name, name))
return (attr->value);
/*
* Didn't find attribute, so return NULL...
*/
return (NULL);
}
/*
* 'mxmlElementSetAttr()' - Set an attribute.
*
* If the named attribute already exists, the value of the attribute
* is replaced by the new string value. The string value is copied
* into the element node. This function does nothing if the node is
* not an element.
*/
void
mxmlElementSetAttr(mxml_node_t *node, /* I - Element node */
const char *name, /* I - Name of attribute */
const char *value) /* I - Attribute value */
{
int i; /* Looping var */
mxml_attr_t *attr; /* New attribute */
#ifdef DEBUG
fprintf(stderr, "mxmlElementSetAttr(node=%p, name=\"%s\", value=\"%s\")\n",
node, name ? name : "(null)", value ? value : "(null)");
#endif /* DEBUG */
/*
* Range check input...
*/
if (!node || node->type != MXML_ELEMENT || !name)
return;
/*
* Look for the attribute...
*/
for (i = node->value.element.num_attrs, attr = node->value.element.attrs;
i > 0;
i --, attr ++)
if (!strcmp(attr->name, name))
{
/*
* Replace the attribute value and return...
*/
if (attr->value)
free(attr->value);
if (value)
{
if ((attr->value = strdup(value)) == NULL)
mxml_error("Unable to allocate memory for attribute '%s' in element %s!",
name, node->value.element.name);
}
else
attr->value = NULL;
return;
}
/*
* Attribute not found, so add a new one...
*/
if (node->value.element.num_attrs == 0)
attr = malloc(sizeof(mxml_attr_t));
else
attr = realloc(node->value.element.attrs,
(node->value.element.num_attrs + 1) * sizeof(mxml_attr_t));
if (!attr)
{
mxml_error("Unable to allocate memory for attribute '%s' in element %s!",
name, node->value.element.name);
return;
}
node->value.element.attrs = attr;
attr += node->value.element.num_attrs;
attr->name = strdup(name);
if (value)
attr->value = strdup(value);
else
attr->value = NULL;
if (!attr->name || (!attr->value && value))
{
if (attr->name)
free(attr->name);
if (attr->value)
free(attr->value);
mxml_error("Unable to allocate memory for attribute '%s' in element %s!",
name, node->value.element.name);
return;
}
node->value.element.num_attrs ++;
}
/*
* End of "$Id: mxml-attr.c 22267 2006-04-24 17:11:45Z kpfleming $".
*/

View File

@ -1,472 +0,0 @@
/*
* "$Id: mxml-entity.c 22267 2006-04-24 17:11:45Z kpfleming $"
*
* Character entity support code for Mini-XML, a small XML-like
* file parsing library.
*
* Copyright 2003-2005 by Michael Sweet.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Contents:
*
* mxmlEntityAddCallback() - Add a callback to convert entities to
* Unicode.
* mxmlEntityGetName() - Get the name that corresponds to the
* character value.
* mxmlEntityGetValue() - Get the character corresponding to a named
* entity.
* mxmlEntityRemoveCallback() - Remove a callback.
* default_callback() - Lookup standard (X)HTML entities.
*/
/*
* Include necessary headers...
*/
#include "config.h"
#include "mxml.h"
/*
* Local functions...
*/
static int default_callback(const char *name);
/*
* Callback array...
*/
static int num_callbacks = 1;
static int (*callbacks[100])(const char *name) =
{
default_callback
};
/*
* 'mxmlEntityAddCallback()' - Add a callback to convert entities to Unicode.
*/
int /* O - 0 on success, -1 on failure */
mxmlEntityAddCallback(int (*cb)(const char *name))
/* I - Callback function to add */
{
if (num_callbacks < (int)(sizeof(callbacks) / sizeof(callbacks[0])))
{
callbacks[num_callbacks] = cb;
num_callbacks ++;
return (0);
}
else
{
mxml_error("Unable to add entity callback!");
return (-1);
}
}
/*
* 'mxmlEntityGetName()' - Get the name that corresponds to the character value.
*
* If val does not need to be represented by a named entity, NULL is returned.
*/
const char * /* O - Entity name or NULL */
mxmlEntityGetName(int val) /* I - Character value */
{
switch (val)
{
case '&' :
return ("amp");
case '<' :
return ("lt");
case '>' :
return ("gt");
case '\"' :
return ("quot");
default :
return (NULL);
}
}
/*
* 'mxmlEntityGetValue()' - Get the character corresponding to a named entity.
*
* The entity name can also be a numeric constant. -1 is returned if the
* name is not known.
*/
int /* O - Character value or -1 on error */
mxmlEntityGetValue(const char *name) /* I - Entity name */
{
int i; /* Looping var */
int ch; /* Character value */
for (i = 0; i < num_callbacks; i ++)
if ((ch = (callbacks[i])(name)) >= 0)
return (ch);
return (-1);
}
/*
* 'mxmlEntityRemoveCallback()' - Remove a callback.
*/
void
mxmlEntityRemoveCallback(int (*cb)(const char *name))
/* I - Callback function to remove */
{
int i; /* Looping var */
for (i = 0; i < num_callbacks; i ++)
if (cb == callbacks[i])
{
/*
* Remove the callback...
*/
num_callbacks --;
if (i < num_callbacks)
memmove(callbacks + i, callbacks + i + 1,
(num_callbacks - i) * sizeof(callbacks[0]));
return;
}
}
/*
* 'default_callback()' - Lookup standard (X)HTML entities.
*/
static int /* O - Unicode value or -1 */
default_callback(const char *name) /* I - Entity name */
{
int diff, /* Difference between names */
current, /* Current entity in search */
first, /* First entity in search */
last; /* Last entity in search */
static const struct
{
const char *name; /* Entity name */
int val; /* Character value */
} entities[] =
{
{ "AElig", 198 },
{ "Aacute", 193 },
{ "Acirc", 194 },
{ "Agrave", 192 },
{ "Alpha", 913 },
{ "Aring", 197 },
{ "Atilde", 195 },
{ "Auml", 196 },
{ "Beta", 914 },
{ "Ccedil", 199 },
{ "Chi", 935 },
{ "Dagger", 8225 },
{ "Delta", 916 },
{ "Dstrok", 208 },
{ "ETH", 208 },
{ "Eacute", 201 },
{ "Ecirc", 202 },
{ "Egrave", 200 },
{ "Epsilon", 917 },
{ "Eta", 919 },
{ "Euml", 203 },
{ "Gamma", 915 },
{ "Iacute", 205 },
{ "Icirc", 206 },
{ "Igrave", 204 },
{ "Iota", 921 },
{ "Iuml", 207 },
{ "Kappa", 922 },
{ "Lambda", 923 },
{ "Mu", 924 },
{ "Ntilde", 209 },
{ "Nu", 925 },
{ "OElig", 338 },
{ "Oacute", 211 },
{ "Ocirc", 212 },
{ "Ograve", 210 },
{ "Omega", 937 },
{ "Omicron", 927 },
{ "Oslash", 216 },
{ "Otilde", 213 },
{ "Ouml", 214 },
{ "Phi", 934 },
{ "Pi", 928 },
{ "Prime", 8243 },
{ "Psi", 936 },
{ "Rho", 929 },
{ "Scaron", 352 },
{ "Sigma", 931 },
{ "THORN", 222 },
{ "Tau", 932 },
{ "Theta", 920 },
{ "Uacute", 218 },
{ "Ucirc", 219 },
{ "Ugrave", 217 },
{ "Upsilon", 933 },
{ "Uuml", 220 },
{ "Xi", 926 },
{ "Yacute", 221 },
{ "Yuml", 376 },
{ "Zeta", 918 },
{ "aacute", 225 },
{ "acirc", 226 },
{ "acute", 180 },
{ "aelig", 230 },
{ "agrave", 224 },
{ "alefsym", 8501 },
{ "alpha", 945 },
{ "amp", '&' },
{ "and", 8743 },
{ "ang", 8736 },
{ "aring", 229 },
{ "asymp", 8776 },
{ "atilde", 227 },
{ "auml", 228 },
{ "bdquo", 8222 },
{ "beta", 946 },
{ "brkbar", 166 },
{ "brvbar", 166 },
{ "bull", 8226 },
{ "cap", 8745 },
{ "ccedil", 231 },
{ "cedil", 184 },
{ "cent", 162 },
{ "chi", 967 },
{ "circ", 710 },
{ "clubs", 9827 },
{ "cong", 8773 },
{ "copy", 169 },
{ "crarr", 8629 },
{ "cup", 8746 },
{ "curren", 164 },
{ "dArr", 8659 },
{ "dagger", 8224 },
{ "darr", 8595 },
{ "deg", 176 },
{ "delta", 948 },
{ "diams", 9830 },
{ "die", 168 },
{ "divide", 247 },
{ "eacute", 233 },
{ "ecirc", 234 },
{ "egrave", 232 },
{ "empty", 8709 },
{ "emsp", 8195 },
{ "ensp", 8194 },
{ "epsilon", 949 },
{ "equiv", 8801 },
{ "eta", 951 },
{ "eth", 240 },
{ "euml", 235 },
{ "euro", 8364 },
{ "exist", 8707 },
{ "fnof", 402 },
{ "forall", 8704 },
{ "frac12", 189 },
{ "frac14", 188 },
{ "frac34", 190 },
{ "frasl", 8260 },
{ "gamma", 947 },
{ "ge", 8805 },
{ "gt", '>' },
{ "hArr", 8660 },
{ "harr", 8596 },
{ "hearts", 9829 },
{ "hellip", 8230 },
{ "hibar", 175 },
{ "iacute", 237 },
{ "icirc", 238 },
{ "iexcl", 161 },
{ "igrave", 236 },
{ "image", 8465 },
{ "infin", 8734 },
{ "int", 8747 },
{ "iota", 953 },
{ "iquest", 191 },
{ "isin", 8712 },
{ "iuml", 239 },
{ "kappa", 954 },
{ "lArr", 8656 },
{ "lambda", 955 },
{ "lang", 9001 },
{ "laquo", 171 },
{ "larr", 8592 },
{ "lceil", 8968 },
{ "ldquo", 8220 },
{ "le", 8804 },
{ "lfloor", 8970 },
{ "lowast", 8727 },
{ "loz", 9674 },
{ "lrm", 8206 },
{ "lsaquo", 8249 },
{ "lsquo", 8216 },
{ "lt", '<' },
{ "macr", 175 },
{ "mdash", 8212 },
{ "micro", 181 },
{ "middot", 183 },
{ "minus", 8722 },
{ "mu", 956 },
{ "nabla", 8711 },
{ "nbsp", 160 },
{ "ndash", 8211 },
{ "ne", 8800 },
{ "ni", 8715 },
{ "not", 172 },
{ "notin", 8713 },
{ "nsub", 8836 },
{ "ntilde", 241 },
{ "nu", 957 },
{ "oacute", 243 },
{ "ocirc", 244 },
{ "oelig", 339 },
{ "ograve", 242 },
{ "oline", 8254 },
{ "omega", 969 },
{ "omicron", 959 },
{ "oplus", 8853 },
{ "or", 8744 },
{ "ordf", 170 },
{ "ordm", 186 },
{ "oslash", 248 },
{ "otilde", 245 },
{ "otimes", 8855 },
{ "ouml", 246 },
{ "para", 182 },
{ "part", 8706 },
{ "permil", 8240 },
{ "perp", 8869 },
{ "phi", 966 },
{ "pi", 960 },
{ "piv", 982 },
{ "plusmn", 177 },
{ "pound", 163 },
{ "prime", 8242 },
{ "prod", 8719 },
{ "prop", 8733 },
{ "psi", 968 },
{ "quot", '\"' },
{ "rArr", 8658 },
{ "radic", 8730 },
{ "rang", 9002 },
{ "raquo", 187 },
{ "rarr", 8594 },
{ "rceil", 8969 },
{ "rdquo", 8221 },
{ "real", 8476 },
{ "reg", 174 },
{ "rfloor", 8971 },
{ "rho", 961 },
{ "rlm", 8207 },
{ "rsaquo", 8250 },
{ "rsquo", 8217 },
{ "sbquo", 8218 },
{ "scaron", 353 },
{ "sdot", 8901 },
{ "sect", 167 },
{ "shy", 173 },
{ "sigma", 963 },
{ "sigmaf", 962 },
{ "sim", 8764 },
{ "spades", 9824 },
{ "sub", 8834 },
{ "sube", 8838 },
{ "sum", 8721 },
{ "sup", 8835 },
{ "sup1", 185 },
{ "sup2", 178 },
{ "sup3", 179 },
{ "supe", 8839 },
{ "szlig", 223 },
{ "tau", 964 },
{ "there4", 8756 },
{ "theta", 952 },
{ "thetasym", 977 },
{ "thinsp", 8201 },
{ "thorn", 254 },
{ "tilde", 732 },
{ "times", 215 },
{ "trade", 8482 },
{ "uArr", 8657 },
{ "uacute", 250 },
{ "uarr", 8593 },
{ "ucirc", 251 },
{ "ugrave", 249 },
{ "uml", 168 },
{ "upsih", 978 },
{ "upsilon", 965 },
{ "uuml", 252 },
{ "weierp", 8472 },
{ "xi", 958 },
{ "yacute", 253 },
{ "yen", 165 },
{ "yuml", 255 },
{ "zeta", 950 },
{ "zwj", 8205 },
{ "zwnj", 8204 }
};
/*
* Do a binary search for the named entity...
*/
first = 0;
last = (int)(sizeof(entities) / sizeof(entities[0]) - 1);
while ((last - first) > 1)
{
current = (first + last) / 2;
if ((diff = strcmp(name, entities[current].name)) == 0)
return (entities[current].val);
else if (diff < 0)
last = current;
else
first = current;
}
/*
* If we get here, there is a small chance that there is still
* a match; check first and last...
*/
if (!strcmp(name, entities[first].name))
return (entities[first].val);
else if (!strcmp(name, entities[last].name))
return (entities[last].val);
else
return (-1);
}
/*
* End of "$Id: mxml-entity.c 22267 2006-04-24 17:11:45Z kpfleming $".
*/

File diff suppressed because it is too large Load Diff

View File

@ -1,649 +0,0 @@
/*
* "$Id: mxml-index.c 22267 2006-04-24 17:11:45Z kpfleming $"
*
* Index support code for Mini-XML, a small XML-like file parsing library.
*
* Copyright 2003-2005 by Michael Sweet.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Contents:
*
* mxmlIndexDelete() - Delete an index.
* mxmlIndexEnum() - Return the next node in the index.
* mxmlIndexFind() - Find the next matching node.
* mxmlIndexNew() - Create a new index.
* mxmlIndexReset() - Reset the enumeration/find pointer in the index and
* return the first node in the index.
* index_compare() - Compare two nodes.
* index_find() - Compare a node with index values.
* index_sort() - Sort the nodes in the index...
*/
/*
* Include necessary headers...
*/
#include "config.h"
#include "mxml.h"
/*
* Sort functions...
*/
static int index_compare(mxml_index_t *ind, mxml_node_t *first,
mxml_node_t *second);
static int index_find(mxml_index_t *ind, const char *element,
const char *value, mxml_node_t *node);
static void index_sort(mxml_index_t *ind, int left, int right);
/*
* 'mxmlIndexDelete()' - Delete an index.
*/
void
mxmlIndexDelete(mxml_index_t *ind) /* I - Index to delete */
{
/*
* Range check input..
*/
if (!ind)
return;
/*
* Free memory...
*/
if (ind->attr)
free(ind->attr);
if (ind->alloc_nodes)
free(ind->nodes);
free(ind);
}
/*
* 'mxmlIndexEnum()' - Return the next node in the index.
*
* Nodes are returned in the sorted order of the index.
*/
mxml_node_t * /* O - Next node or NULL if there is none */
mxmlIndexEnum(mxml_index_t *ind) /* I - Index to enumerate */
{
/*
* Range check input...
*/
if (!ind)
return (NULL);
/*
* Return the next node...
*/
if (ind->cur_node < ind->num_nodes)
return (ind->nodes[ind->cur_node ++]);
else
return (NULL);
}
/*
* 'mxmlIndexFind()' - Find the next matching node.
*
* You should call mxmlIndexReset() prior to using this function for
* the first time with a particular set of "element" and "value"
* strings. Passing NULL for both "element" and "value" is equivalent
* to calling mxmlIndexEnum().
*/
mxml_node_t * /* O - Node or NULL if none found */
mxmlIndexFind(mxml_index_t *ind, /* I - Index to search */
const char *element, /* I - Element name to find, if any */
const char *value) /* I - Attribute value, if any */
{
int diff, /* Difference between names */
current, /* Current entity in search */
first, /* First entity in search */
last; /* Last entity in search */
#ifdef DEBUG
printf("mxmlIndexFind(ind=%p, element=\"%s\", value=\"%s\")\n",
ind, element ? element : "(null)", value ? value : "(null)");
#endif /* DEBUG */
/*
* Range check input...
*/
if (!ind || (!ind->attr && value))
{
#ifdef DEBUG
puts(" returning NULL...");
printf(" ind->attr=\"%s\"\n", ind->attr ? ind->attr : "(null)");
#endif /* DEBUG */
return (NULL);
}
/*
* If both element and value are NULL, just enumerate the nodes in the
* index...
*/
if (!element && !value)
return (mxmlIndexEnum(ind));
/*
* If there are no nodes in the index, return NULL...
*/
if (!ind->num_nodes)
{
#ifdef DEBUG
puts(" returning NULL...");
puts(" no nodes!");
#endif /* DEBUG */
return (NULL);
}
/*
* If cur_node == 0, then find the first matching node...
*/
if (ind->cur_node == 0)
{
/*
* Find the first node using a modified binary search algorithm...
*/
first = 0;
last = ind->num_nodes - 1;
#ifdef DEBUG
printf(" find first time, num_nodes=%d...\n", ind->num_nodes);
#endif /* DEBUG */
while ((last - first) > 1)
{
current = (first + last) / 2;
#ifdef DEBUG
printf(" first=%d, last=%d, current=%d\n", first, last, current);
#endif /* DEBUG */
if ((diff = index_find(ind, element, value, ind->nodes[current])) == 0)
{
/*
* Found a match, move back to find the first...
*/
#ifdef DEBUG
puts(" match!");
#endif /* DEBUG */
while (current > 0 &&
!index_find(ind, element, value, ind->nodes[current - 1]))
current --;
#ifdef DEBUG
printf(" returning first match=%d\n", current);
#endif /* DEBUG */
/*
* Return the first match and save the index to the next...
*/
ind->cur_node = current + 1;
return (ind->nodes[current]);
}
else if (diff < 0)
last = current;
else
first = current;
#ifdef DEBUG
printf(" diff=%d\n", diff);
#endif /* DEBUG */
}
/*
* If we get this far, then we found exactly 0 or 1 matches...
*/
for (current = first; current <= last; current ++)
if (!index_find(ind, element, value, ind->nodes[current]))
{
/*
* Found exactly one (or possibly two) match...
*/
#ifdef DEBUG
printf(" returning only match %d...\n", current);
#endif /* DEBUG */
ind->cur_node = current + 1;
return (ind->nodes[current]);
}
/*
* No matches...
*/
ind->cur_node = ind->num_nodes;
#ifdef DEBUG
puts(" returning NULL...");
#endif /* DEBUG */
return (NULL);
}
else if (ind->cur_node < ind->num_nodes &&
!index_find(ind, element, value, ind->nodes[ind->cur_node]))
{
/*
* Return the next matching node...
*/
#ifdef DEBUG
printf(" returning next match %d...\n", ind->cur_node);
#endif /* DEBUG */
return (ind->nodes[ind->cur_node ++]);
}
/*
* If we get this far, then we have no matches...
*/
ind->cur_node = ind->num_nodes;
#ifdef DEBUG
puts(" returning NULL...");
#endif /* DEBUG */
return (NULL);
}
/*
* 'mxmlIndexNew()' - Create a new index.
*
* The index will contain all nodes that contain the named element and/or
* attribute. If both "element" and "attr" are NULL, then the index will
* contain a sorted list of the elements in the node tree. Nodes are
* sorted by element name and optionally by attribute value if the "attr"
* argument is not NULL.
*/
mxml_index_t * /* O - New index */
mxmlIndexNew(mxml_node_t *node, /* I - XML node tree */
const char *element, /* I - Element to index or NULL for all */
const char *attr) /* I - Attribute to index or NULL for none */
{
mxml_index_t *ind; /* New index */
mxml_node_t *current, /* Current node in index */
**temp; /* Temporary node pointer array */
/*
* Range check input...
*/
#ifdef DEBUG
printf("mxmlIndexNew(node=%p, element=\"%s\", attr=\"%s\")\n",
node, element ? element : "(null)", attr ? attr : "(null)");
#endif /* DEBUG */
if (!node)
return (NULL);
/*
* Create a new index...
*/
if ((ind = calloc(1, sizeof(mxml_index_t))) == NULL)
{
mxml_error("Unable to allocate %d bytes for index - %s",
sizeof(mxml_index_t), strerror(errno));
return (NULL);
}
if (attr)
ind->attr = strdup(attr);
if (!element && !attr)
current = node;
else
current = mxmlFindElement(node, node, element, attr, NULL, MXML_DESCEND);
while (current)
{
if (ind->num_nodes >= ind->alloc_nodes)
{
if (!ind->alloc_nodes)
temp = malloc(64 * sizeof(mxml_node_t *));
else
temp = realloc(ind->nodes, (ind->alloc_nodes + 64) * sizeof(mxml_node_t *));
if (!temp)
{
/*
* Unable to allocate memory for the index, so abort...
*/
mxml_error("Unable to allocate %d bytes for index: %s",
(ind->alloc_nodes + 64) * sizeof(mxml_node_t *),
strerror(errno));
mxmlIndexDelete(ind);
return (NULL);
}
ind->nodes = temp;
ind->alloc_nodes += 64;
}
ind->nodes[ind->num_nodes ++] = current;
current = mxmlFindElement(current, node, element, attr, NULL, MXML_DESCEND);
}
/*
* Sort nodes based upon the search criteria...
*/
#ifdef DEBUG
{
int i; /* Looping var */
printf("%d node(s) in index.\n\n", ind->num_nodes);
if (attr)
{
printf("Node Address Element %s\n", attr);
puts("-------- -------- -------------- ------------------------------");
for (i = 0; i < ind->num_nodes; i ++)
printf("%8d %-8p %-14.14s %s\n", i, ind->nodes[i],
ind->nodes[i]->value.element.name,
mxmlElementGetAttr(ind->nodes[i], attr));
}
else
{
puts("Node Address Element");
puts("-------- -------- --------------");
for (i = 0; i < ind->num_nodes; i ++)
printf("%8d %-8p %s\n", i, ind->nodes[i],
ind->nodes[i]->value.element.name);
}
putchar('\n');
}
#endif /* DEBUG */
if (ind->num_nodes > 1)
index_sort(ind, 0, ind->num_nodes - 1);
#ifdef DEBUG
{
int i; /* Looping var */
puts("After sorting:\n");
if (attr)
{
printf("Node Address Element %s\n", attr);
puts("-------- -------- -------------- ------------------------------");
for (i = 0; i < ind->num_nodes; i ++)
printf("%8d %-8p %-14.14s %s\n", i, ind->nodes[i],
ind->nodes[i]->value.element.name,
mxmlElementGetAttr(ind->nodes[i], attr));
}
else
{
puts("Node Address Element");
puts("-------- -------- --------------");
for (i = 0; i < ind->num_nodes; i ++)
printf("%8d %-8p %s\n", i, ind->nodes[i],
ind->nodes[i]->value.element.name);
}
putchar('\n');
}
#endif /* DEBUG */
/*
* Return the new index...
*/
return (ind);
}
/*
* 'mxmlIndexReset()' - Reset the enumeration/find pointer in the index and
* return the first node in the index.
*
* This function should be called prior to using mxmlIndexEnum() or
* mxmlIndexFind() for the first time.
*/
mxml_node_t * /* O - First node or NULL if there is none */
mxmlIndexReset(mxml_index_t *ind) /* I - Index to reset */
{
#ifdef DEBUG
printf("mxmlIndexReset(ind=%p)\n", ind);
#endif /* DEBUG */
/*
* Range check input...
*/
if (!ind)
return (NULL);
/*
* Set the index to the first element...
*/
ind->cur_node = 0;
/*
* Return the first node...
*/
if (ind->num_nodes)
return (ind->nodes[0]);
else
return (NULL);
}
/*
* 'index_compare()' - Compare two nodes.
*/
static int /* O - Result of comparison */
index_compare(mxml_index_t *ind, /* I - Index */
mxml_node_t *first, /* I - First node */
mxml_node_t *second) /* I - Second node */
{
int diff; /* Difference */
/*
* Check the element name...
*/
if ((diff = strcmp(first->value.element.name,
second->value.element.name)) != 0)
return (diff);
/*
* Check the attribute value...
*/
if (ind->attr)
{
if ((diff = strcmp(mxmlElementGetAttr(first, ind->attr),
mxmlElementGetAttr(second, ind->attr))) != 0)
return (diff);
}
/*
* No difference, return 0...
*/
return (0);
}
/*
* 'index_find()' - Compare a node with index values.
*/
static int /* O - Result of comparison */
index_find(mxml_index_t *ind, /* I - Index */
const char *element, /* I - Element name or NULL */
const char *value, /* I - Attribute value or NULL */
mxml_node_t *node) /* I - Node */
{
int diff; /* Difference */
/*
* Check the element name...
*/
if (element)
{
if ((diff = strcmp(element, node->value.element.name)) != 0)
return (diff);
}
/*
* Check the attribute value...
*/
if (value)
{
if ((diff = strcmp(value, mxmlElementGetAttr(node, ind->attr))) != 0)
return (diff);
}
/*
* No difference, return 0...
*/
return (0);
}
/*
* 'index_sort()' - Sort the nodes in the index...
*
* This function implements the classic quicksort algorithm...
*/
static void
index_sort(mxml_index_t *ind, /* I - Index to sort */
int left, /* I - Left node in partition */
int right) /* I - Right node in partition */
{
mxml_node_t *pivot, /* Pivot node */
*temp; /* Swap node */
int templ, /* Temporary left node */
tempr; /* Temporary right node */
/*
* Loop until we have sorted all the way to the right...
*/
do
{
/*
* Sort the pivot in the current partition...
*/
pivot = ind->nodes[left];
for (templ = left, tempr = right; templ < tempr;)
{
/*
* Move left while left node <= pivot node...
*/
while ((templ < right) &&
index_compare(ind, ind->nodes[templ], pivot) <= 0)
templ ++;
/*
* Move right while right node > pivot node...
*/
while ((tempr > left) &&
index_compare(ind, ind->nodes[tempr], pivot) > 0)
tempr --;
/*
* Swap nodes if needed...
*/
if (templ < tempr)
{
temp = ind->nodes[templ];
ind->nodes[templ] = ind->nodes[tempr];
ind->nodes[tempr] = temp;
}
}
/*
* When we get here, the right (tempr) node is the new position for the
* pivot node...
*/
if (index_compare(ind, pivot, ind->nodes[tempr]) > 0)
{
ind->nodes[left] = ind->nodes[tempr];
ind->nodes[tempr] = pivot;
}
/*
* Recursively sort the left partition as needed...
*/
if (left < (tempr - 1))
index_sort(ind, left, tempr - 1);
}
while (right > (left = tempr + 1));
}
/*
* End of "$Id: mxml-index.c 22267 2006-04-24 17:11:45Z kpfleming $".
*/

View File

@ -1,664 +0,0 @@
/*
* "$Id: mxml-node.c 22267 2006-04-24 17:11:45Z kpfleming $"
*
* Node support code for Mini-XML, a small XML-like file parsing library.
*
* Copyright 2003-2005 by Michael Sweet.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Contents:
*
* mxmlAdd() - Add a node to a tree.
* mxmlDelete() - Delete a node and all of its children.
* mxmlNewElement() - Create a new element node.
* mxmlNewInteger() - Create a new integer node.
* mxmlNewOpaque() - Create a new opaque string.
* mxmlNewReal() - Create a new real number node.
* mxmlNewText() - Create a new text fragment node.
* mxmlNewTextf() - Create a new formatted text fragment node.
* mxmlRemove() - Remove a node from its parent.
* mxml_new() - Create a new node.
*/
/*
* Include necessary headers...
*/
#include "config.h"
#include "mxml.h"
/*
* Local functions...
*/
static mxml_node_t *mxml_new(mxml_node_t *parent, mxml_type_t type);
/*
* 'mxmlAdd()' - Add a node to a tree.
*
* Adds the specified node to the parent. If the child argument is not
* NULL, puts the new node before or after the specified child depending
* on the value of the where argument. If the child argument is NULL,
* puts the new node at the beginning of the child list (MXML_ADD_BEFORE)
* or at the end of the child list (MXML_ADD_AFTER). The constant
* MXML_ADD_TO_PARENT can be used to specify a NULL child pointer.
*/
void
mxmlAdd(mxml_node_t *parent, /* I - Parent node */
int where, /* I - Where to add, MXML_ADD_BEFORE or MXML_ADD_AFTER */
mxml_node_t *child, /* I - Child node for where or MXML_ADD_TO_PARENT */
mxml_node_t *node) /* I - Node to add */
{
#ifdef DEBUG
fprintf(stderr, "mxmlAdd(parent=%p, where=%d, child=%p, node=%p)\n", parent,
where, child, node);
#endif /* DEBUG */
/*
* Range check input...
*/
if (!parent || !node)
return;
#if DEBUG > 1
fprintf(stderr, " BEFORE: node->parent=%p\n", node->parent);
if (parent)
{
fprintf(stderr, " BEFORE: parent->child=%p\n", parent->child);
fprintf(stderr, " BEFORE: parent->last_child=%p\n", parent->last_child);
fprintf(stderr, " BEFORE: parent->prev=%p\n", parent->prev);
fprintf(stderr, " BEFORE: parent->next=%p\n", parent->next);
}
#endif /* DEBUG > 1 */
/*
* Remove the node from any existing parent...
*/
if (node->parent)
mxmlRemove(node);
/*
* Reset pointers...
*/
node->parent = parent;
switch (where)
{
case MXML_ADD_BEFORE :
if (!child || child == parent->child || child->parent != parent)
{
/*
* Insert as first node under parent...
*/
node->next = parent->child;
if (parent->child)
parent->child->prev = node;
else
parent->last_child = node;
parent->child = node;
}
else
{
/*
* Insert node before this child...
*/
node->next = child;
node->prev = child->prev;
if (child->prev)
child->prev->next = node;
else
parent->child = node;
child->prev = node;
}
break;
case MXML_ADD_AFTER :
if (!child || child == parent->last_child || child->parent != parent)
{
/*
* Insert as last node under parent...
*/
node->parent = parent;
node->prev = parent->last_child;
if (parent->last_child)
parent->last_child->next = node;
else
parent->child = node;
parent->last_child = node;
}
else
{
/*
* Insert node after this child...
*/
node->prev = child;
node->next = child->next;
if (child->next)
child->next->prev = node;
else
parent->last_child = node;
child->next = node;
}
break;
}
#if DEBUG > 1
fprintf(stderr, " AFTER: node->parent=%p\n", node->parent);
if (parent)
{
fprintf(stderr, " AFTER: parent->child=%p\n", parent->child);
fprintf(stderr, " AFTER: parent->last_child=%p\n", parent->last_child);
fprintf(stderr, " AFTER: parent->prev=%p\n", parent->prev);
fprintf(stderr, " AFTER: parent->next=%p\n", parent->next);
}
#endif /* DEBUG > 1 */
}
/*
* 'mxmlDelete()' - Delete a node and all of its children.
*
* If the specified node has a parent, this function first removes the
* node from its parent using the mxmlRemove() function.
*/
void
mxmlDelete(mxml_node_t *node) /* I - Node to delete */
{
int i; /* Looping var */
#ifdef DEBUG
fprintf(stderr, "mxmlDelete(node=%p)\n", node);
#endif /* DEBUG */
/*
* Range check input...
*/
if (!node)
return;
/*
* Remove the node from its parent, if any...
*/
mxmlRemove(node);
/*
* Delete children...
*/
while (node->child)
mxmlDelete(node->child);
/*
* Now delete any node data...
*/
switch (node->type)
{
case MXML_ELEMENT :
if (node->value.element.name)
free(node->value.element.name);
if (node->value.element.num_attrs)
{
for (i = 0; i < node->value.element.num_attrs; i ++)
{
if (node->value.element.attrs[i].name)
free(node->value.element.attrs[i].name);
if (node->value.element.attrs[i].value)
free(node->value.element.attrs[i].value);
}
free(node->value.element.attrs);
}
break;
case MXML_INTEGER :
/* Nothing to do */
break;
case MXML_OPAQUE :
if (node->value.opaque)
free(node->value.opaque);
break;
case MXML_REAL :
/* Nothing to do */
break;
case MXML_TEXT :
if (node->value.text.string)
free(node->value.text.string);
break;
case MXML_CUSTOM :
if (node->value.custom.data &&
node->value.custom.destroy)
(*(node->value.custom.destroy))(node->value.custom.data);
break;
}
/*
* Free this node...
*/
free(node);
}
/*
* 'mxmlNewCustom()' - Create a new custom data node.
*
* The new custom node is added to the end of the specified parent's child
* list. The constant MXML_NO_PARENT can be used to specify that the new
* element node has no parent. NULL can be passed when the data in the
* node is not dynamically allocated or is separately managed.
*/
mxml_node_t * /* O - New node */
mxmlNewCustom(mxml_node_t *parent, /* I - Parent node or MXML_NO_PARENT */
void *data, /* I - Pointer to data */
void (*destroy)(void *))
/* I - Function to destroy data */
{
mxml_node_t *node; /* New node */
#ifdef DEBUG
fprintf(stderr, "mxmlNewCustom(parent=%p, data=%p, destroy=%p)\n", parent,
data, destroy);
#endif /* DEBUG */
/*
* Create the node and set the value...
*/
if ((node = mxml_new(parent, MXML_CUSTOM)) != NULL)
{
node->value.custom.data = data;
node->value.custom.destroy = destroy;
}
return (node);
}
/*
* 'mxmlNewElement()' - Create a new element node.
*
* The new element node is added to the end of the specified parent's child
* list. The constant MXML_NO_PARENT can be used to specify that the new
* element node has no parent.
*/
mxml_node_t * /* O - New node */
mxmlNewElement(mxml_node_t *parent, /* I - Parent node or MXML_NO_PARENT */
const char *name) /* I - Name of element */
{
mxml_node_t *node; /* New node */
#ifdef DEBUG
fprintf(stderr, "mxmlNewElement(parent=%p, name=\"%s\")\n", parent,
name ? name : "(null)");
#endif /* DEBUG */
/*
* Range check input...
*/
if (!name)
return (NULL);
/*
* Create the node and set the element name...
*/
if ((node = mxml_new(parent, MXML_ELEMENT)) != NULL)
node->value.element.name = strdup(name);
return (node);
}
/*
* 'mxmlNewInteger()' - Create a new integer node.
*
* The new integer node is added to the end of the specified parent's child
* list. The constant MXML_NO_PARENT can be used to specify that the new
* integer node has no parent.
*/
mxml_node_t * /* O - New node */
mxmlNewInteger(mxml_node_t *parent, /* I - Parent node or MXML_NO_PARENT */
int integer) /* I - Integer value */
{
mxml_node_t *node; /* New node */
#ifdef DEBUG
fprintf(stderr, "mxmlNewInteger(parent=%p, integer=%d)\n", parent, integer);
#endif /* DEBUG */
/*
* Create the node and set the element name...
*/
if ((node = mxml_new(parent, MXML_INTEGER)) != NULL)
node->value.integer = integer;
return (node);
}
/*
* 'mxmlNewOpaque()' - Create a new opaque string.
*
* The new opaque node is added to the end of the specified parent's child
* list. The constant MXML_NO_PARENT can be used to specify that the new
* opaque node has no parent. The opaque string must be nul-terminated and
* is copied into the new node.
*/
mxml_node_t * /* O - New node */
mxmlNewOpaque(mxml_node_t *parent, /* I - Parent node or MXML_NO_PARENT */
const char *opaque) /* I - Opaque string */
{
mxml_node_t *node; /* New node */
#ifdef DEBUG
fprintf(stderr, "mxmlNewOpaque(parent=%p, opaque=\"%s\")\n", parent,
opaque ? opaque : "(null)");
#endif /* DEBUG */
/*
* Range check input...
*/
if (!opaque)
return (NULL);
/*
* Create the node and set the element name...
*/
if ((node = mxml_new(parent, MXML_OPAQUE)) != NULL)
node->value.opaque = strdup(opaque);
return (node);
}
/*
* 'mxmlNewReal()' - Create a new real number node.
*
* The new real number node is added to the end of the specified parent's
* child list. The constant MXML_NO_PARENT can be used to specify that
* the new real number node has no parent.
*/
mxml_node_t * /* O - New node */
mxmlNewReal(mxml_node_t *parent, /* I - Parent node or MXML_NO_PARENT */
double real) /* I - Real number value */
{
mxml_node_t *node; /* New node */
#ifdef DEBUG
fprintf(stderr, "mxmlNewReal(parent=%p, real=%g)\n", parent, real);
#endif /* DEBUG */
/*
* Create the node and set the element name...
*/
if ((node = mxml_new(parent, MXML_REAL)) != NULL)
node->value.real = real;
return (node);
}
/*
* 'mxmlNewText()' - Create a new text fragment node.
*
* The new text node is added to the end of the specified parent's child
* list. The constant MXML_NO_PARENT can be used to specify that the new
* text node has no parent. The whitespace parameter is used to specify
* whether leading whitespace is present before the node. The text
* string must be nul-terminated and is copied into the new node.
*/
mxml_node_t * /* O - New node */
mxmlNewText(mxml_node_t *parent, /* I - Parent node or MXML_NO_PARENT */
int whitespace, /* I - 1 = leading whitespace, 0 = no whitespace */
const char *string) /* I - String */
{
mxml_node_t *node; /* New node */
#ifdef DEBUG
fprintf(stderr, "mxmlNewText(parent=%p, whitespace=%d, string=\"%s\")\n",
parent, whitespace, string ? string : "(null)");
#endif /* DEBUG */
/*
* Range check input...
*/
if (!string)
return (NULL);
/*
* Create the node and set the text value...
*/
if ((node = mxml_new(parent, MXML_TEXT)) != NULL)
{
node->value.text.whitespace = whitespace;
node->value.text.string = strdup(string);
}
return (node);
}
/*
* 'mxmlNewTextf()' - Create a new formatted text fragment node.
*
* The new text node is added to the end of the specified parent's child
* list. The constant MXML_NO_PARENT can be used to specify that the new
* text node has no parent. The whitespace parameter is used to specify
* whether leading whitespace is present before the node. The format
* string must be nul-terminated and is formatted into the new node.
*/
mxml_node_t * /* O - New node */
mxmlNewTextf(mxml_node_t *parent, /* I - Parent node or MXML_NO_PARENT */
int whitespace, /* I - 1 = leading whitespace, 0 = no whitespace */
const char *format, /* I - Printf-style frmat string */
...) /* I - Additional args as needed */
{
mxml_node_t *node; /* New node */
va_list ap; /* Pointer to arguments */
#ifdef DEBUG
fprintf(stderr, "mxmlNewTextf(parent=%p, whitespace=%d, format=\"%s\", ...)\n",
parent, whitespace, format ? format : "(null)");
#endif /* DEBUG */
/*
* Range check input...
*/
if (!format)
return (NULL);
/*
* Create the node and set the text value...
*/
if ((node = mxml_new(parent, MXML_TEXT)) != NULL)
{
va_start(ap, format);
node->value.text.whitespace = whitespace;
node->value.text.string = mxml_strdupf(format, ap);
va_end(ap);
}
return (node);
}
/*
* 'mxmlRemove()' - Remove a node from its parent.
*
* Does not free memory used by the node - use mxmlDelete() for that.
* This function does nothing if the node has no parent.
*/
void
mxmlRemove(mxml_node_t *node) /* I - Node to remove */
{
#ifdef DEBUG
fprintf(stderr, "mxmlRemove(node=%p)\n", node);
#endif /* DEBUG */
/*
* Range check input...
*/
if (!node || !node->parent)
return;
/*
* Remove from parent...
*/
#if DEBUG > 1
fprintf(stderr, " BEFORE: node->parent=%p\n", node->parent);
if (node->parent)
{
fprintf(stderr, " BEFORE: node->parent->child=%p\n", node->parent->child);
fprintf(stderr, " BEFORE: node->parent->last_child=%p\n", node->parent->last_child);
}
fprintf(stderr, " BEFORE: node->child=%p\n", node->child);
fprintf(stderr, " BEFORE: node->last_child=%p\n", node->last_child);
fprintf(stderr, " BEFORE: node->prev=%p\n", node->prev);
fprintf(stderr, " BEFORE: node->next=%p\n", node->next);
#endif /* DEBUG > 1 */
if (node->prev)
node->prev->next = node->next;
else
node->parent->child = node->next;
if (node->next)
node->next->prev = node->prev;
else
node->parent->last_child = node->prev;
node->parent = NULL;
node->prev = NULL;
node->next = NULL;
#if DEBUG > 1
fprintf(stderr, " AFTER: node->parent=%p\n", node->parent);
if (node->parent)
{
fprintf(stderr, " AFTER: node->parent->child=%p\n", node->parent->child);
fprintf(stderr, " AFTER: node->parent->last_child=%p\n", node->parent->last_child);
}
fprintf(stderr, " AFTER: node->child=%p\n", node->child);
fprintf(stderr, " AFTER: node->last_child=%p\n", node->last_child);
fprintf(stderr, " AFTER: node->prev=%p\n", node->prev);
fprintf(stderr, " AFTER: node->next=%p\n", node->next);
#endif /* DEBUG > 1 */
}
/*
* 'mxml_new()' - Create a new node.
*/
static mxml_node_t * /* O - New node */
mxml_new(mxml_node_t *parent, /* I - Parent node */
mxml_type_t type) /* I - Node type */
{
mxml_node_t *node; /* New node */
#if DEBUG > 1
fprintf(stderr, "mxml_new(parent=%p, type=%d)\n", parent, type);
#endif /* DEBUG > 1 */
/*
* Allocate memory for the node...
*/
if ((node = calloc(1, sizeof(mxml_node_t))) == NULL)
{
#if DEBUG > 1
fputs(" returning NULL\n", stderr);
#endif /* DEBUG > 1 */
return (NULL);
}
#if DEBUG > 1
fprintf(stderr, " returning %p\n", node);
#endif /* DEBUG > 1 */
/*
* Set the node type...
*/
node->type = type;
/*
* Add to the parent if present...
*/
if (parent)
mxmlAdd(parent, MXML_ADD_AFTER, MXML_ADD_TO_PARENT, node);
/*
* Return the new node...
*/
return (node);
}
/*
* End of "$Id: mxml-node.c 22267 2006-04-24 17:11:45Z kpfleming $".
*/

View File

@ -1,128 +0,0 @@
/*
* "$Id: mxml-private.c 22267 2006-04-24 17:11:45Z kpfleming $"
*
* Private functions for Mini-XML, a small XML-like file parsing library.
*
* Copyright 2003-2005 by Michael Sweet.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Contents:
*
* mxml_error() - Display an error message.
* mxml_integer_cb() - Default callback for integer values.
* mxml_opaque_cb() - Default callback for opaque values.
* mxml_real_cb() - Default callback for real number values.
*/
/*
* Include necessary headers...
*/
#include "config.h"
#include "mxml.h"
/*
* Error callback function...
*/
void (*mxml_error_cb)(const char *) = NULL;
/*
* 'mxml_error()' - Display an error message.
*/
void
mxml_error(const char *format, /* I - Printf-style format string */
...) /* I - Additional arguments as needed */
{
va_list ap; /* Pointer to arguments */
char *s; /* Message string */
/*
* Range check input...
*/
if (!format)
return;
/*
* Format the error message string...
*/
va_start(ap, format);
s = mxml_strdupf(format, ap);
va_end(ap);
/*
* And then display the error message...
*/
if (mxml_error_cb)
(*mxml_error_cb)(s);
else
fprintf(stderr, "mxml: %s\n", s);
/*
* Free the string...
*/
free(s);
}
/*
* 'mxml_integer_cb()' - Default callback for integer values.
*/
mxml_type_t /* O - Node type */
mxml_integer_cb(mxml_node_t *node) /* I - Current node */
{
(void)node;
return (MXML_INTEGER);
}
/*
* 'mxml_opaque_cb()' - Default callback for opaque values.
*/
mxml_type_t /* O - Node type */
mxml_opaque_cb(mxml_node_t *node) /* I - Current node */
{
(void)node;
return (MXML_OPAQUE);
}
/*
* 'mxml_real_cb()' - Default callback for real number values.
*/
mxml_type_t /* O - Node type */
mxml_real_cb(mxml_node_t *node) /* I - Current node */
{
(void)node;
return (MXML_REAL);
}
/*
* End of "$Id: mxml-private.c 22267 2006-04-24 17:11:45Z kpfleming $".
*/

View File

@ -1,199 +0,0 @@
/*
* "$Id: mxml-search.c 22267 2006-04-24 17:11:45Z kpfleming $"
*
* Search/navigation functions for Mini-XML, a small XML-like file
* parsing library.
*
* Copyright 2003-2005 by Michael Sweet.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Contents:
*
* mxmlFindElement() - Find the named element.
* mxmlWalkNext() - Walk to the next logical node in the tree.
* mxmlWalkPrev() - Walk to the previous logical node in the tree.
*/
/*
* Include necessary headers...
*/
#include "config.h"
#include "mxml.h"
/*
* 'mxmlFindElement()' - Find the named element.
*
* The search is constrained by the name, attribute name, and value; any
* NULL names or values are treated as wildcards, so different kinds of
* searches can be implemented by looking for all elements of a given name
* or all elements with a specific attribute. The descend argument determines
* whether the search descends into child nodes; normally you will use
* MXML_DESCEND_FIRST for the initial search and MXML_NO_DESCEND to find
* additional direct descendents of the node. The top node argument
* constrains the search to a particular node's children.
*/
mxml_node_t * /* O - Element node or NULL */
mxmlFindElement(mxml_node_t *node, /* I - Current node */
mxml_node_t *top, /* I - Top node */
const char *name, /* I - Element name or NULL for any */
const char *attr, /* I - Attribute name, or NULL for none */
const char *value, /* I - Attribute value, or NULL for any */
int descend) /* I - Descend into tree - MXML_DESCEND, MXML_NO_DESCEND, or MXML_DESCEND_FIRST */
{
const char *temp; /* Current attribute value */
/*
* Range check input...
*/
if (!node || !top || (!attr && value))
return (NULL);
/*
* Start with the next node...
*/
node = mxmlWalkNext(node, top, descend);
/*
* Loop until we find a matching element...
*/
while (node != NULL)
{
/*
* See if this node matches...
*/
if (node->type == MXML_ELEMENT &&
node->value.element.name &&
(!name || !strcmp(node->value.element.name, name)))
{
/*
* See if we need to check for an attribute...
*/
if (!attr)
return (node); /* No attribute search, return it... */
/*
* Check for the attribute...
*/
if ((temp = mxmlElementGetAttr(node, attr)) != NULL)
{
/*
* OK, we have the attribute, does it match?
*/
if (!value || !strcmp(value, temp))
return (node); /* Yes, return it... */
}
}
/*
* No match, move on to the next node...
*/
if (descend == MXML_DESCEND)
node = mxmlWalkNext(node, top, MXML_DESCEND);
else
node = node->next;
}
return (NULL);
}
/*
* 'mxmlWalkNext()' - Walk to the next logical node in the tree.
*
* The descend argument controls whether the first child is considered
* to be the next node. The top node argument constrains the walk to
* the node's children.
*/
mxml_node_t * /* O - Next node or NULL */
mxmlWalkNext(mxml_node_t *node, /* I - Current node */
mxml_node_t *top, /* I - Top node */
int descend) /* I - Descend into tree - MXML_DESCEND, MXML_NO_DESCEND, or MXML_DESCEND_FIRST */
{
if (!node)
return (NULL);
else if (node->child && descend)
return (node->child);
else if (node->next)
return (node->next);
else if (node->parent && node->parent != top)
{
node = node->parent;
while (!node->next)
if (node->parent == top || !node->parent)
return (NULL);
else
node = node->parent;
return (node->next);
}
else
return (NULL);
}
/*
* 'mxmlWalkPrev()' - Walk to the previous logical node in the tree.
*
* The descend argument controls whether the previous node's last child
* is considered to be the previous node. The top node argument constrains
* the walk to the node's children.
*/
mxml_node_t * /* O - Previous node or NULL */
mxmlWalkPrev(mxml_node_t *node, /* I - Current node */
mxml_node_t *top, /* I - Top node */
int descend) /* I - Descend into tree - MXML_DESCEND, MXML_NO_DESCEND, or MXML_DESCEND_FIRST */
{
if (!node)
return (NULL);
else if (node->prev)
{
if (node->prev->last_child && descend)
{
/*
* Find the last child under the previous node...
*/
node = node->prev->last_child;
while (node->last_child)
node = node->last_child;
return (node);
}
else
return (node->prev);
}
else if (node->parent != top)
return (node->parent);
else
return (NULL);
}
/*
* End of "$Id: mxml-search.c 22267 2006-04-24 17:11:45Z kpfleming $".
*/

View File

@ -1,257 +0,0 @@
/*
* "$Id: mxml-set.c 22267 2006-04-24 17:11:45Z kpfleming $"
*
* Node set functions for Mini-XML, a small XML-like file parsing library.
*
* Copyright 2003-2005 by Michael Sweet.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Contents:
*
* mxmlSetElement() - Set the name of an element node.
* mxmlSetInteger() - Set the value of an integer node.
* mxmlSetOpaque() - Set the value of an opaque node.
* mxmlSetReal() - Set the value of a real number node.
* mxmlSetText() - Set the value of a text node.
* mxmlSetTextf() - Set the value of a text node to a formatted string.
*/
/*
* Include necessary headers...
*/
#include "config.h"
#include "mxml.h"
/*
* 'mxmlSetCustom()' - Set the data and destructor of a custom data node.
*
* The node is not changed if it is not a custom node.
*/
int /* O - 0 on success, -1 on failure */
mxmlSetCustom(mxml_node_t *node, /* I - Node to set */
void *data, /* I - New data pointer */
void (*destroy)(void *))
/* I - New destructor function */
{
/*
* Range check input...
*/
if (!node || node->type != MXML_CUSTOM)
return (-1);
/*
* Free any old element value and set the new value...
*/
if (node->value.custom.data && node->value.custom.destroy)
(*(node->value.custom.destroy))(node->value.custom.data);
node->value.custom.data = data;
node->value.custom.destroy = destroy;
return (0);
}
/*
* 'mxmlSetElement()' - Set the name of an element node.
*
* The node is not changed if it is not an element node.
*/
int /* O - 0 on success, -1 on failure */
mxmlSetElement(mxml_node_t *node, /* I - Node to set */
const char *name) /* I - New name string */
{
/*
* Range check input...
*/
if (!node || node->type != MXML_ELEMENT || !name)
return (-1);
/*
* Free any old element value and set the new value...
*/
if (node->value.element.name)
free(node->value.element.name);
node->value.element.name = strdup(name);
return (0);
}
/*
* 'mxmlSetInteger()' - Set the value of an integer node.
*
* The node is not changed if it is not an integer node.
*/
int /* O - 0 on success, -1 on failure */
mxmlSetInteger(mxml_node_t *node, /* I - Node to set */
int integer) /* I - Integer value */
{
/*
* Range check input...
*/
if (!node || node->type != MXML_INTEGER)
return (-1);
/*
* Set the new value and return...
*/
node->value.integer = integer;
return (0);
}
/*
* 'mxmlSetOpaque()' - Set the value of an opaque node.
*
* The node is not changed if it is not an opaque node.
*/
int /* O - 0 on success, -1 on failure */
mxmlSetOpaque(mxml_node_t *node, /* I - Node to set */
const char *opaque) /* I - Opaque string */
{
/*
* Range check input...
*/
if (!node || node->type != MXML_OPAQUE || !opaque)
return (-1);
/*
* Free any old opaque value and set the new value...
*/
if (node->value.opaque)
free(node->value.opaque);
node->value.opaque = strdup(opaque);
return (0);
}
/*
* 'mxmlSetReal()' - Set the value of a real number node.
*
* The node is not changed if it is not a real number node.
*/
int /* O - 0 on success, -1 on failure */
mxmlSetReal(mxml_node_t *node, /* I - Node to set */
double real) /* I - Real number value */
{
/*
* Range check input...
*/
if (!node || node->type != MXML_REAL)
return (-1);
/*
* Set the new value and return...
*/
node->value.real = real;
return (0);
}
/*
* 'mxmlSetText()' - Set the value of a text node.
*
* The node is not changed if it is not a text node.
*/
int /* O - 0 on success, -1 on failure */
mxmlSetText(mxml_node_t *node, /* I - Node to set */
int whitespace, /* I - 1 = leading whitespace, 0 = no whitespace */
const char *string) /* I - String */
{
/*
* Range check input...
*/
if (!node || node->type != MXML_TEXT || !string)
return (-1);
/*
* Free any old string value and set the new value...
*/
if (node->value.text.string)
free(node->value.text.string);
node->value.text.whitespace = whitespace;
node->value.text.string = strdup(string);
return (0);
}
/*
* 'mxmlSetTextf()' - Set the value of a text node to a formatted string.
*
* The node is not changed if it is not a text node.
*/
int /* O - 0 on success, -1 on failure */
mxmlSetTextf(mxml_node_t *node, /* I - Node to set */
int whitespace, /* I - 1 = leading whitespace, 0 = no whitespace */
const char *format, /* I - Printf-style format string */
...) /* I - Additional arguments as needed */
{
va_list ap; /* Pointer to arguments */
/*
* Range check input...
*/
if (!node || node->type != MXML_TEXT || !format)
return (-1);
/*
* Free any old string value and set the new value...
*/
if (node->value.text.string)
free(node->value.text.string);
va_start(ap, format);
node->value.text.whitespace = whitespace;
node->value.text.string = mxml_strdupf(format, ap);
va_end(ap);
return (0);
}
/*
* End of "$Id: mxml-set.c 22267 2006-04-24 17:11:45Z kpfleming $".
*/

View File

@ -1,377 +0,0 @@
/*
* "$Id: mxml-string.c 22267 2006-04-24 17:11:45Z kpfleming $"
*
* String functions for Mini-XML, a small XML-like file parsing library.
*
* Copyright 2003-2005 by Michael Sweet.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Contents:
*
* mxml_strdup() - Duplicate a string.
* mxml_strdupf() - Format and duplicate a string.
* mxml_vsnprintf() - Format a string into a fixed size buffer.
*/
/*
* Include necessary headers...
*/
#include "config.h"
/*
* 'mxml_strdup()' - Duplicate a string.
*/
#ifndef HAVE_STRDUP
char * /* O - New string pointer */
mxml_strdup(const char *s) /* I - String to duplicate */
{
char *t; /* New string pointer */
if (s == NULL)
return (NULL);
if ((t = malloc(strlen(s) + 1)) == NULL)
return (NULL);
return (strcpy(t, s));
}
#endif /* !HAVE_STRDUP */
/*
* 'mxml_strdupf()' - Format and duplicate a string.
*/
char * /* O - New string pointer */
mxml_strdupf(const char *format, /* I - Printf-style format string */
va_list ap) /* I - Pointer to additional arguments */
{
int bytes; /* Number of bytes required */
char *buffer, /* String buffer */
temp[256]; /* Small buffer for first vsnprintf */
/*
* First format with a tiny buffer; this will tell us how many bytes are
* needed...
*/
bytes = vsnprintf(temp, sizeof(temp), format, ap);
if (bytes < sizeof(temp))
{
/*
* Hey, the formatted string fits in the tiny buffer, so just dup that...
*/
return (strdup(temp));
}
/*
* Allocate memory for the whole thing and reformat to the new, larger
* buffer...
*/
if ((buffer = calloc(1, bytes + 1)) != NULL)
vsnprintf(buffer, bytes + 1, format, ap);
/*
* Return the new string...
*/
return (buffer);
}
#ifndef HAVE_VSNPRINTF
/*
* 'mxml_vsnprintf()' - Format a string into a fixed size buffer.
*/
int /* O - Number of bytes formatted */
mxml_vsnprintf(char *buffer, /* O - Output buffer */
size_t bufsize, /* O - Size of output buffer */
const char *format, /* I - Printf-style format string */
va_list ap) /* I - Pointer to additional arguments */
{
char *bufptr, /* Pointer to position in buffer */
*bufend, /* Pointer to end of buffer */
sign, /* Sign of format width */
size, /* Size character (h, l, L) */
type; /* Format type character */
const char *bufformat; /* Start of format */
int width, /* Width of field */
prec; /* Number of characters of precision */
char tformat[100], /* Temporary format string for sprintf() */
temp[1024]; /* Buffer for formatted numbers */
char *s; /* Pointer to string */
int slen; /* Length of string */
int bytes; /* Total number of bytes needed */
/*
* Loop through the format string, formatting as needed...
*/
bufptr = buffer;
bufend = buffer + bufsize - 1;
bytes = 0;
while (*format)
{
if (*format == '%')
{
bufformat = format;
format ++;
if (*format == '%')
{
*bufptr++ = *format++;
continue;
}
else if (strchr(" -+#\'", *format))
sign = *format++;
else
sign = 0;
width = 0;
while (isdigit(*format))
width = width * 10 + *format++ - '0';
if (*format == '.')
{
format ++;
prec = 0;
while (isdigit(*format))
prec = prec * 10 + *format++ - '0';
}
else
prec = -1;
if (*format == 'l' && format[1] == 'l')
{
size = 'L';
format += 2;
}
else if (*format == 'h' || *format == 'l' || *format == 'L')
size = *format++;
if (!*format)
break;
type = *format++;
switch (type)
{
case 'E' : /* Floating point formats */
case 'G' :
case 'e' :
case 'f' :
case 'g' :
if ((format - bufformat + 1) > sizeof(tformat) ||
(width + 2) > sizeof(temp))
break;
strncpy(tformat, bufformat, format - bufformat);
tformat[format - bufformat] = '\0';
sprintf(temp, tformat, va_arg(ap, double));
bytes += strlen(temp);
if (bufptr)
{
if ((bufptr + strlen(temp)) > bufend)
{
strncpy(bufptr, temp, bufend - bufptr);
bufptr = bufend;
break;
}
else
{
strcpy(bufptr, temp);
bufptr += strlen(temp);
}
}
break;
case 'B' : /* Integer formats */
case 'X' :
case 'b' :
case 'd' :
case 'i' :
case 'o' :
case 'u' :
case 'x' :
if ((format - bufformat + 1) > sizeof(tformat) ||
(width + 2) > sizeof(temp))
break;
strncpy(tformat, bufformat, format - bufformat);
tformat[format - bufformat] = '\0';
sprintf(temp, tformat, va_arg(ap, int));
bytes += strlen(temp);
if (bufptr)
{
if ((bufptr + strlen(temp)) > bufend)
{
strncpy(bufptr, temp, bufend - bufptr);
bufptr = bufend;
break;
}
else
{
strcpy(bufptr, temp);
bufptr += strlen(temp);
}
}
break;
case 'p' : /* Pointer value */
if ((format - bufformat + 1) > sizeof(tformat) ||
(width + 2) > sizeof(temp))
break;
strncpy(tformat, bufformat, format - bufformat);
tformat[format - bufformat] = '\0';
sprintf(temp, tformat, va_arg(ap, void *));
bytes += strlen(temp);
if (bufptr)
{
if ((bufptr + strlen(temp)) > bufend)
{
strncpy(bufptr, temp, bufend - bufptr);
bufptr = bufend;
break;
}
else
{
strcpy(bufptr, temp);
bufptr += strlen(temp);
}
}
break;
case 'c' : /* Character or character array */
bytes += width;
if (bufptr)
{
if (width <= 1)
*bufptr++ = va_arg(ap, int);
else
{
if ((bufptr + width) > bufend)
width = bufend - bufptr;
memcpy(bufptr, va_arg(ap, char *), width);
bufptr += width;
}
}
break;
case 's' : /* String */
if ((s = va_arg(ap, char *)) == NULL)
s = "(null)";
slen = strlen(s);
if (slen > width && prec != width)
width = slen;
bytes += width;
if (bufptr)
{
if ((bufptr + width) > bufend)
width = bufend - bufptr;
if (slen > width)
slen = width;
if (sign == '-')
{
strncpy(bufptr, s, slen);
memset(bufptr + slen, ' ', width - slen);
}
else
{
memset(bufptr, ' ', width - slen);
strncpy(bufptr + width - slen, s, slen);
}
bufptr += width;
}
break;
case 'n' : /* Output number of chars so far */
if ((format - bufformat + 1) > sizeof(tformat) ||
(width + 2) > sizeof(temp))
break;
strncpy(tformat, bufformat, format - bufformat);
tformat[format - bufformat] = '\0';
sprintf(temp, tformat, va_arg(ap, int));
bytes += strlen(temp);
if (bufptr)
{
if ((bufptr + strlen(temp)) > bufend)
{
strncpy(bufptr, temp, bufend - bufptr);
bufptr = bufend;
break;
}
else
{
strcpy(bufptr, temp);
bufptr += strlen(temp);
}
}
break;
}
}
else
{
bytes ++;
if (bufptr && bufptr < bufend)
*bufptr++ = *format++;
}
}
/*
* Nul-terminate the string and return the number of characters needed.
*/
*bufptr = '\0';
return (bytes);
}
#endif /* !HAVE_VSNPRINTF */
/*
* End of "$Id: mxml-string.c 22267 2006-04-24 17:11:45Z kpfleming $".
*/

View File

@ -1,254 +0,0 @@
/*
* "$Id: mxml.h 22267 2006-04-24 17:11:45Z kpfleming $"
*
* Header file for Mini-XML, a small XML-like file parsing library.
*
* Copyright 2003-2005 by Michael Sweet.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/*
* Prevent multiple inclusion...
*/
#ifndef _mxml_h_
# define _mxml_h_
/*
* Include necessary headers...
*/
# include <stdio.h>
# include <stdlib.h>
# include <string.h>
# include <ctype.h>
# include <errno.h>
/*
* Constants...
*/
# define MXML_WRAP 72 /* Wrap XML output at this column position */
# define MXML_TAB 8 /* Tabs every N columns */
# define MXML_NO_CALLBACK 0 /* Don't use a type callback */
# define MXML_INTEGER_CALLBACK mxml_integer_cb
/* Treat all data as integers */
# define MXML_OPAQUE_CALLBACK mxml_opaque_cb
/* Treat all data as opaque */
# define MXML_REAL_CALLBACK mxml_real_cb
/* Treat all data as real numbers */
# define MXML_TEXT_CALLBACK 0 /* Treat all data as text */
# define MXML_NO_PARENT 0 /* No parent for the node */
# define MXML_DESCEND 1 /* Descend when finding/walking */
# define MXML_NO_DESCEND 0 /* Don't descend when finding/walking */
# define MXML_DESCEND_FIRST -1 /* Descend for first find */
# define MXML_WS_BEFORE_OPEN 0 /* Callback for before open tag */
# define MXML_WS_AFTER_OPEN 1 /* Callback for after open tag */
# define MXML_WS_BEFORE_CLOSE 2 /* Callback for before close tag */
# define MXML_WS_AFTER_CLOSE 3 /* Callback for after close tag */
# define MXML_ADD_BEFORE 0 /* Add node before specified node */
# define MXML_ADD_AFTER 1 /* Add node after specified node */
# define MXML_ADD_TO_PARENT NULL /* Add node relative to parent */
/*
* Data types...
*/
typedef enum mxml_type_e /**** The XML node type. ****/
{
MXML_ELEMENT, /* XML element with attributes */
MXML_INTEGER, /* Integer value */
MXML_OPAQUE, /* Opaque string */
MXML_REAL, /* Real value */
MXML_TEXT, /* Text fragment */
MXML_CUSTOM /* Custom data */
} mxml_type_t;
typedef struct mxml_attr_s /**** An XML element attribute value. ****/
{
char *name; /* Attribute name */
char *value; /* Attribute value */
} mxml_attr_t;
typedef struct mxml_value_s /**** An XML element value. ****/
{
char *name; /* Name of element */
int num_attrs; /* Number of attributes */
mxml_attr_t *attrs; /* Attributes */
} mxml_element_t;
typedef struct mxml_text_s /**** An XML text value. ****/
{
int whitespace; /* Leading whitespace? */
char *string; /* Fragment string */
} mxml_text_t;
typedef struct mxml_custom_s /**** An XML custom value. ****/
{
void *data; /* Pointer to (allocated) custom data */
void (*destroy)(void *);
/* Pointer to destructor function */
} mxml_custom_t;
typedef union mxml_value_u /**** An XML node value. ****/
{
mxml_element_t element; /* Element */
int integer; /* Integer number */
char *opaque; /* Opaque string */
double real; /* Real number */
mxml_text_t text; /* Text fragment */
mxml_custom_t custom; /* Custom data */
} mxml_value_t;
typedef struct mxml_node_s /**** An XML node. ****/
{
mxml_type_t type; /* Node type */
struct mxml_node_s *next; /* Next node under same parent */
struct mxml_node_s *prev; /* Previous node under same parent */
struct mxml_node_s *parent; /* Parent node */
struct mxml_node_s *child; /* First child node */
struct mxml_node_s *last_child; /* Last child node */
mxml_value_t value; /* Node value */
} mxml_node_t;
typedef struct mxml_index_s /**** An XML node index. ****/
{
char *attr; /* Attribute used for indexing or NULL */
int num_nodes; /* Number of nodes in index */
int alloc_nodes; /* Allocated nodes in index */
int cur_node; /* Current node */
mxml_node_t **nodes; /* Node array */
} mxml_index_t;
typedef int (*mxml_custom_load_cb_t)(mxml_node_t *, const char *);
/**** Custom data load callback function ****/
typedef char *(*mxml_custom_save_cb_t)(mxml_node_t *);
/**** Custom data save callback function ****/
/*
* C++ support...
*/
# ifdef __cplusplus
extern "C" {
# endif /* __cplusplus */
/*
* Prototypes...
*/
extern void mxmlAdd(mxml_node_t *parent, int where,
mxml_node_t *child, mxml_node_t *node);
extern void mxmlDelete(mxml_node_t *node);
extern const char *mxmlElementGetAttr(mxml_node_t *node, const char *name);
extern void mxmlElementSetAttr(mxml_node_t *node, const char *name,
const char *value);
extern int mxmlEntityAddCallback(int (*cb)(const char *name));
extern const char *mxmlEntityGetName(int val);
extern int mxmlEntityGetValue(const char *name);
extern void mxmlEntityRemoveCallback(int (*cb)(const char *name));
extern mxml_node_t *mxmlFindElement(mxml_node_t *node, mxml_node_t *top,
const char *name, const char *attr,
const char *value, int descend);
extern void mxmlIndexDelete(mxml_index_t *ind);
extern mxml_node_t *mxmlIndexEnum(mxml_index_t *ind);
extern mxml_node_t *mxmlIndexFind(mxml_index_t *ind,
const char *element,
const char *value);
extern mxml_index_t *mxmlIndexNew(mxml_node_t *node, const char *element,
const char *attr);
extern mxml_node_t *mxmlIndexReset(mxml_index_t *ind);
extern mxml_node_t *mxmlLoadFd(mxml_node_t *top, int fd,
mxml_type_t (*cb)(mxml_node_t *));
extern mxml_node_t *mxmlLoadFile(mxml_node_t *top, FILE *fp,
mxml_type_t (*cb)(mxml_node_t *));
extern mxml_node_t *mxmlLoadString(mxml_node_t *top, const char *s,
mxml_type_t (*cb)(mxml_node_t *));
extern mxml_node_t *mxmlNewCustom(mxml_node_t *parent, void *data,
void (*destroy)(void *));
extern mxml_node_t *mxmlNewElement(mxml_node_t *parent, const char *name);
extern mxml_node_t *mxmlNewInteger(mxml_node_t *parent, int integer);
extern mxml_node_t *mxmlNewOpaque(mxml_node_t *parent, const char *opaque);
extern mxml_node_t *mxmlNewReal(mxml_node_t *parent, double real);
extern mxml_node_t *mxmlNewText(mxml_node_t *parent, int whitespace,
const char *string);
extern mxml_node_t *mxmlNewTextf(mxml_node_t *parent, int whitespace,
const char *format, ...)
# ifdef __GNUC__
__attribute__ ((__format__ (__printf__, 3, 4)))
# endif /* __GNUC__ */
;
extern void mxmlRemove(mxml_node_t *node);
extern char *mxmlSaveAllocString(mxml_node_t *node,
const char *(*cb)(mxml_node_t *, int));
extern int mxmlSaveFd(mxml_node_t *node, int fd,
const char *(*cb)(mxml_node_t *, int));
extern int mxmlSaveFile(mxml_node_t *node, FILE *fp,
const char *(*cb)(mxml_node_t *, int));
extern int mxmlSaveString(mxml_node_t *node, char *buffer,
int bufsize,
const char *(*cb)(mxml_node_t *, int));
extern int mxmlSetCustom(mxml_node_t *node, void *data,
void (*destroy)(void *));
extern void mxmlSetCustomHandlers(mxml_custom_load_cb_t load,
mxml_custom_save_cb_t save);
extern int mxmlSetElement(mxml_node_t *node, const char *name);
extern void mxmlSetErrorCallback(void (*cb)(const char *));
extern int mxmlSetInteger(mxml_node_t *node, int integer);
extern int mxmlSetOpaque(mxml_node_t *node, const char *opaque);
extern int mxmlSetReal(mxml_node_t *node, double real);
extern int mxmlSetText(mxml_node_t *node, int whitespace,
const char *string);
extern int mxmlSetTextf(mxml_node_t *node, int whitespace,
const char *format, ...)
# ifdef __GNUC__
__attribute__ ((__format__ (__printf__, 3, 4)))
# endif /* __GNUC__ */
;
extern mxml_node_t *mxmlWalkNext(mxml_node_t *node, mxml_node_t *top,
int descend);
extern mxml_node_t *mxmlWalkPrev(mxml_node_t *node, mxml_node_t *top,
int descend);
/*
* Private functions...
*/
extern void mxml_error(const char *format, ...);
extern mxml_type_t mxml_integer_cb(mxml_node_t *node);
extern mxml_type_t mxml_opaque_cb(mxml_node_t *node);
extern mxml_type_t mxml_real_cb(mxml_node_t *node);
/*
* C++ support...
*/
# ifdef __cplusplus
}
# endif /* __cplusplus */
#endif /* !_mxml_h_ */
/*
* End of "$Id: mxml.h 22267 2006-04-24 17:11:45Z kpfleming $".
*/

View File

@ -1,115 +0,0 @@
#
# "$Id: mxml.list.in 22267 2006-04-24 17:11:45Z kpfleming $"
#
# EPM software list file for Mini-XML, a small XML library.
#
# Copyright 2003-2005 by Michael Sweet.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU Library General Public
# License as published by the Free Software Foundation; either
# version 2, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# Directories...
$prefix=@prefix@
$exec_prefix=@exec_prefix@
$bindir=@bindir@
$docdir=@docdir@
$includedir=@includedir@
$libdir=@libdir@
$mandir=@mandir@
$srcdir=@srcdir@
$datarootdir=@datarootdir@
$PICFLAG=@PICFLAG@
# Product information
%product mxml
%copyright 2003-2005 by Michael Sweet
%vendor Michael Sweet
%license ${srcdir}/COPYING
%readme ${srcdir}/README
%version @VERSION@
%description <<EOF
Mini-XML is a small XML parsing library that you can use to read
XML and XML-like data files in your application without
requiring large non-standard libraries. Mini-XML provides the
following functionality:
- Reading of UTF-8 and UTF-16 and writing of UTF-8 encoded
XML files and strings.
- Data is stored in a linked-list tree structure, preserving
the XML data hierarchy.
- Supports arbitrary element names, attributes, and
attribute values with no preset limits, just available
memory.
- Supports integer, real, opaque ("cdata"), and text data
types in "leaf" nodes.
- Functions for creating and managing trees of data.
- "Find" and "walk" functions for easily locating and
navigating trees of data.
Mini-XML doesn't do validation or other types of processing on
the data based upon schema files or other sources of definition
information, nor does it support character entities other than
those required by the XML specification.
EOF
# Manpage extensions...
$CAT1EXT=@CAT1EXT@
$CAT3EXT=@CAT3EXT@
$MAN1EXT=@MAN1EXT@
$MAN3EXT=@MAN3EXT@
# Executables
f 0555 root sys ${bindir}/mxmldoc mxmldoc
# Header files
f 0444 root sys ${includedir}/mxml.h mxml.h
# Libraries
%if $PICFLAG
%system hpux
f 0555 root sys ${libdir}/libmxml.sl.1 libmxml.sl.1
l 0555 root sys ${libdir}/libmxml.sl libmxml.sl.1
%system dylib
f 0555 root sys ${libdir}/libmxml.1.dylib libmxml.1.dylib
l 0555 root sys ${libdir}/libmxml.dylib libmxml.1.dylib
%system freebsd irix linux netbsd openbsd solaris tru64
f 0555 root sys ${libdir}/libmxml.so.1.0 libmxml.so.1.0
l 0555 root sys ${libdir}/libmxml.sl.1 libmxml.sl.1.0
l 0555 root sys ${libdir}/libmxml.sl libmxml.sl.1.0
%system all
%endif
f 0444 root sys ${libdir}/libmxml.a libmxml.a
# pkg-config info
f 0444 root sys $(libdir)/pkgconfig/mxml.pc mxml.pc
# Documentation
f 0444 root sys ${docdir}/README $srcdir/README
f 0444 root sys ${docdir}/COPYING $srcdir/COPYING
f 0444 root sys ${docdir}/CHANGES $srcdir/CHANGES
f 0444 root sys ${docdir}/mxml.html $srcdir/doc/mxml.html
f 0444 root sys ${docdir}/mxml.pdf $srcdir/doc/mxml.pdf
# Man pages
f 0444 root sys ${mandir}/cat1/mxmldoc.$CAT1EXT $srcdir/mxmldoc.$CAT1EXT
f 0444 root sys ${mandir}/man1/mxmldoc.$MAN1EXT $srcdir/mxmldoc.man
f 0444 root sys ${mandir}/cat3/mxml.$CAT3EXT $srcdir/mxml.$CAT3EXT
f 0444 root sys ${mandir}/man3/mxml.$MAN3EXT $srcdir/mxml.man
#
# End of "$Id: mxml.list.in 22267 2006-04-24 17:11:45Z kpfleming $".
#

View File

@ -1,10 +0,0 @@
prefix=@prefix@
exec_prefix=@exec_prefix@
libdir=@libdir@
includedir=@includedir@
Name: Mini-XML
Description: Lightweight XML support library
Version: @VERSION@
Libs: @PC_LIBS@
Cflags: @PC_CFLAGS@

View File

@ -1,243 +0,0 @@
/*
* Asterisk -- An open source telephony toolkit.
*
* Copyright (C) 1999 - 2006, Digium, Inc.
*
* See http://www.asterisk.org for more information about
* the Asterisk project. Please do not directly contact
* any of the maintainers of this project for assistance;
* the project provides a web site, mailing lists and IRC
* channels for your use.
*
* This program is free software, distributed under the terms of
* the GNU General Public License Version 2. See the LICENSE file
* at the top of the source tree.
*/
/*! \file
*
* \brief Compatibility functions for strsep and strtoq missing on Solaris
*/
#include "autoconfig.h"
#include <sys/types.h>
#include <ctype.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <stdarg.h>
#ifdef HAVE_ALLOCA_H
#include <alloca.h>
#endif
#ifndef HAVE_STRSEP
char *strsep(char **str, const char *delims)
{
char *token;
if (!*str) {
/* No more tokens */
return NULL;
}
token = *str;
while (**str != '\0') {
if (strchr(delims, **str)) {
**str = '\0';
(*str)++;
return token;
}
(*str)++;
}
/* There is no other token */
*str = NULL;
return token;
}
#endif
#ifndef HAVE_SETENV
int setenv(const char *name, const char *value, int overwrite)
{
unsigned char *buf;
int buflen;
buflen = strlen(name) + strlen(value) + 2;
buf = alloca(buflen);
if (!overwrite && getenv(name))
return 0;
snprintf(buf, buflen, "%s=%s", name, value);
return putenv(buf);
}
#endif
#ifndef HAVE_UNSETENV
int unsetenv(const char *name)
{
return setenv(name, "", 0);
}
#endif
#ifndef HAVE_STRCASESTR
static char *upper(const char *orig, char *buf, int bufsize)
{
int i = 0;
while (i < (bufsize - 1) && orig[i]) {
buf[i] = toupper(orig[i]);
i++;
}
buf[i] = '\0';
return buf;
}
char *strcasestr(const char *haystack, const char *needle)
{
char *u1, *u2;
int u1len = strlen(haystack) + 1, u2len = strlen(needle) + 1;
u1 = alloca(u1len);
u2 = alloca(u2len);
if (u1 && u2) {
char *offset;
if (u2len > u1len) {
/* Needle bigger than haystack */
return NULL;
}
offset = strstr(upper(haystack, u1, u1len), upper(needle, u2, u2len));
if (offset) {
/* Return the offset into the original string */
return ((char *)((unsigned long)haystack + (unsigned long)(offset - u1)));
} else {
return NULL;
}
} else {
return NULL;
}
}
#endif /* !HAVE_STRCASESTR */
#ifndef HAVE_STRNLEN
size_t strnlen(const char *s, size_t n)
{
size_t len;
for (len = 0; len < n; len++)
if (s[len] == '\0')
break;
return len;
}
#endif /* !HAVE_STRNLEN */
#if !defined(HAVE_STRNDUP) && !defined(__AST_DEBUG_MALLOC)
char *strndup(const char *s, size_t n)
{
size_t len = strnlen(s, n);
char *new = malloc(len + 1);
if (!new)
return NULL;
new[len] = '\0';
return memcpy(new, s, len);
}
#endif /* !defined(HAVE_STRNDUP) && !defined(__AST_DEBUG_MALLOC) */
#if !defined(HAVE_VASPRINTF) && !defined(__AST_DEBUG_MALLOC)
int vasprintf(char **strp, const char *fmt, va_list ap)
{
int size;
va_list ap2;
char s;
*strp = NULL;
va_copy(ap2, ap);
size = vsnprintf(&s, 1, fmt, ap2);
va_end(ap2);
*strp = malloc(size + 1);
if (!*strp)
return -1;
vsnprintf(*strp, size + 1, fmt, ap);
return size;
}
#endif /* !defined(HAVE_VASPRINTF) && !defined(__AST_DEBUG_MALLOC) */
/*
* Based on Code from bsd-asprintf from OpenSSH
* Copyright (c) 2004 Darren Tucker.
*
* Based originally on asprintf.c from OpenBSD:
* Copyright (c) 1997 Todd C. Miller <Todd.Miller@courtesan.com>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#if !defined(HAVE_ASPRINTF) && !defined(__AST_DEBUG_MALLOC)
int asprintf(char **str, const char *fmt, ...)
{
va_list ap;
int ret;
*str = NULL;
va_start(ap, fmt);
ret = vasprintf(str, fmt, ap);
va_end(ap);
return ret;
}
#endif /* !defined(HAVE_ASPRINTF) && !defined(__AST_DEBUG_MALLOC) */
#ifndef HAVE_GETLOADAVG
#ifdef linux
/*! \brief Alternative method of getting load avg on Linux only */
int getloadavg(double *list, int nelem)
{
FILE *LOADAVG;
double avg[3] = { 0.0, 0.0, 0.0 };
int i, res = -1;
if ((LOADAVG = fopen("/proc/loadavg", "r"))) {
fscanf(LOADAVG, "%lf %lf %lf", &avg[0], &avg[1], &avg[2]);
res = 0;
fclose(LOADAVG);
}
for (i = 0; (i < nelem) && (i < 3); i++) {
list[i] = avg[i];
}
return res;
}
#else /* !linux */
/*! \brief Return something that won't cancel the call, but still return -1, in case
* we correct the implementation to check return value */
int getloadavg(double *list, int nelem)
{
int i;
for (i = 0; i < nelem; i++) {
list[i] = 0.1;
}
return -1;
}
#endif /* linux */
#endif /* !HAVE_GETLOADAVG */

View File

@ -1,52 +0,0 @@
ASOUND=1
CRYPTO=1
CURL=1
DAHDI=1
FREETDS=1
GMIME=1
GNU_LD=1
GSM=1
GTK2=1
GTK=0
H323=0
HOARD=0
ICONV=1
IKSEMEL=1
IMAP_TK=1
ISDNNET=0
IXJUSER=1
JACK=1
LDAP=1
LTDL=1
LUA=0
MISDN=0
NBS=0
NETSNMP=0
NEWT=1
OGG=1
OPENH323=0
OSPTK=1
OSSAUDIO=1
PGSQL=1
POPT=1
PORTAUDIO=1
PRI=0
RESAMPLE=0
AIS=0
RADIUS=1
SPANDSP=0
SPEEX=1
SPEEXDSP=1
SPEEX_PREPROCESS=1
SQLITE3=1
SQLITE=1
SS7=0
SSL=1
SUPPSERV=0
TONEZONE=1
UNIXODBC=1
USB=1
VORBIS=1
VPBAPI=0
WINARCH=0
ZLIB=1

View File

@ -1,716 +0,0 @@
<?xml version="1.0"?>
<menu name="Asterisk Module and Build Option Selection">
<category name="MENUSELECT_APPS" displayname="Applications" remove_on_change="apps/modules.link">
<member name="app_adsiprog" displayname="Asterisk ADSI Programming Application" remove_on_change="apps/app_adsiprog.o apps/app_adsiprog.so">
<depend>res_adsi</depend>
</member>
<member name="app_alarmreceiver" displayname="Alarm Receiver for Asterisk" remove_on_change="apps/app_alarmreceiver.o apps/app_alarmreceiver.so">
</member>
<member name="app_amd" displayname="Answering Machine Detection Application" remove_on_change="apps/app_amd.o apps/app_amd.so">
</member>
<member name="app_authenticate" displayname="Authentication Application" remove_on_change="apps/app_authenticate.o apps/app_authenticate.so">
</member>
<member name="app_cdr" displayname="Tell Asterisk to not maintain a CDR for the current call" remove_on_change="apps/app_cdr.o apps/app_cdr.so">
</member>
<member name="app_chanisavail" displayname="Check channel availability" remove_on_change="apps/app_chanisavail.o apps/app_chanisavail.so">
</member>
<member name="app_channelredirect" displayname="Redirects a given channel to a dialplan target" remove_on_change="apps/app_channelredirect.o apps/app_channelredirect.so">
</member>
<member name="app_chanspy" displayname="Listen to the audio of an active channel" remove_on_change="apps/app_chanspy.o apps/app_chanspy.so">
</member>
<member name="app_controlplayback" displayname="Control Playback Application" remove_on_change="apps/app_controlplayback.o apps/app_controlplayback.so">
</member>
<member name="app_dahdibarge" displayname="Barge in on DAHDI channel application" remove_on_change="apps/app_dahdibarge.o apps/app_dahdibarge.so">
<depend name="dahdi">DAHDI</depend>
</member>
<member name="app_dahdiras" displayname="DAHDI ISDN Remote Access Server" remove_on_change="apps/app_dahdiras.o apps/app_dahdiras.so">
<depend name="dahdi">DAHDI</depend>
</member>
<member name="app_dahdiscan" displayname="Scan DAHDI channels application" remove_on_change="apps/app_dahdiscan.o apps/app_dahdiscan.so">
<depend name="dahdi">DAHDI</depend>
</member>
<member name="app_db" displayname="Database Access Functions" remove_on_change="apps/app_db.o apps/app_db.so">
</member>
<member name="app_dial" displayname="Dialing Application" remove_on_change="apps/app_dial.o apps/app_dial.so">
<depend>chan_local</depend>
</member>
<member name="app_dictate" displayname="Virtual Dictation Machine" remove_on_change="apps/app_dictate.o apps/app_dictate.so">
</member>
<member name="app_directed_pickup" displayname="Directed Call Pickup Application" remove_on_change="apps/app_directed_pickup.o apps/app_directed_pickup.so">
</member>
<member name="app_directory" displayname="Extension Directory" remove_on_change="apps/app_directory.o apps/app_directory.so">
<depend>app_voicemail</depend>
</member>
<member name="app_disa" displayname="DISA (Direct Inward System Access) Application" remove_on_change="apps/app_disa.o apps/app_disa.so">
</member>
<member name="app_dumpchan" displayname="Dump Info About The Calling Channel" remove_on_change="apps/app_dumpchan.o apps/app_dumpchan.so">
</member>
<member name="app_echo" displayname="Simple Echo Application" remove_on_change="apps/app_echo.o apps/app_echo.so">
</member>
<member name="app_exec" displayname="Executes dialplan applications" remove_on_change="apps/app_exec.o apps/app_exec.so">
</member>
<member name="app_externalivr" displayname="External IVR Interface Application" remove_on_change="apps/app_externalivr.o apps/app_externalivr.so">
</member>
<member name="app_fax" displayname="Simple FAX Application" remove_on_change="apps/app_fax.o apps/app_fax.so">
<depend>spandsp</depend>
</member>
<member name="app_festival" displayname="Simple Festival Interface" remove_on_change="apps/app_festival.o apps/app_festival.so">
</member>
<member name="app_flash" displayname="Flash channel application" remove_on_change="apps/app_flash.o apps/app_flash.so">
<depend name="dahdi">DAHDI</depend>
</member>
<member name="app_followme" displayname="Find-Me/Follow-Me Application" remove_on_change="apps/app_followme.o apps/app_followme.so">
<depend>chan_local</depend>
</member>
<member name="app_forkcdr" displayname="Fork The CDR into 2 separate entities" remove_on_change="apps/app_forkcdr.o apps/app_forkcdr.so">
</member>
<member name="app_getcpeid" displayname="Get ADSI CPE ID" remove_on_change="apps/app_getcpeid.o apps/app_getcpeid.so">
</member>
<member name="app_ices" displayname="Encode and Stream via icecast and ices" remove_on_change="apps/app_ices.o apps/app_ices.so">
</member>
<member name="app_image" displayname="Image Transmission Application" remove_on_change="apps/app_image.o apps/app_image.so">
</member>
<member name="app_ivrdemo" displayname="IVR Demo Application" remove_on_change="apps/app_ivrdemo.o apps/app_ivrdemo.so">
<defaultenabled>no</defaultenabled>
</member>
<member name="app_jack" displayname="JACK Interface" remove_on_change="apps/app_jack.o apps/app_jack.so">
<depend>jack</depend>
<depend name="resample">libresample</depend>
</member>
<member name="app_macro" displayname="Extension Macros" remove_on_change="apps/app_macro.o apps/app_macro.so">
</member>
<member name="app_meetme" displayname="MeetMe conference bridge" remove_on_change="apps/app_meetme.o apps/app_meetme.so">
<depend>dahdi</depend>
</member>
<member name="app_milliwatt" displayname="Digital Milliwatt (mu-law) Test Application" remove_on_change="apps/app_milliwatt.o apps/app_milliwatt.so">
<depend>res_indications</depend>
</member>
<member name="app_minivm" displayname="Mini VoiceMail (A minimal Voicemail e-mail System)" remove_on_change="apps/app_minivm.o apps/app_minivm.so">
</member>
<member name="app_mixmonitor" displayname="Mixed Audio Monitoring Application" remove_on_change="apps/app_mixmonitor.o apps/app_mixmonitor.so">
</member>
<member name="app_morsecode" displayname="Morse code" remove_on_change="apps/app_morsecode.o apps/app_morsecode.so">
</member>
<member name="app_mp3" displayname="Silly MP3 Application" remove_on_change="apps/app_mp3.o apps/app_mp3.so">
</member>
<member name="app_nbscat" displayname="Silly NBS Stream Application" remove_on_change="apps/app_nbscat.o apps/app_nbscat.so">
</member>
<member name="app_osplookup" displayname="Open Settlement Protocol Applications" remove_on_change="apps/app_osplookup.o apps/app_osplookup.so">
<depend>osptk</depend>
<depend>ssl</depend>
</member>
<member name="app_page" displayname="Page Multiple Phones" remove_on_change="apps/app_page.o apps/app_page.so">
<depend name="dahdi">DAHDI</depend>
<depend>app_meetme</depend>
</member>
<member name="app_parkandannounce" displayname="Call Parking and Announce Application" remove_on_change="apps/app_parkandannounce.o apps/app_parkandannounce.so">
</member>
<member name="app_playback" displayname="Sound File Playback Application" remove_on_change="apps/app_playback.o apps/app_playback.so">
</member>
<member name="app_privacy" displayname="Require phone number to be entered, if no CallerID sent" remove_on_change="apps/app_privacy.o apps/app_privacy.so">
</member>
<member name="app_queue" displayname="True Call Queueing" remove_on_change="apps/app_queue.o apps/app_queue.so">
<depend>res_monitor</depend>
</member>
<member name="app_read" displayname="Read Variable Application" remove_on_change="apps/app_read.o apps/app_read.so">
</member>
<member name="app_readexten" displayname="Read and evaluate extension validity" remove_on_change="apps/app_readexten.o apps/app_readexten.so">
</member>
<member name="app_readfile" displayname="Stores output of file into a variable" remove_on_change="apps/app_readfile.o apps/app_readfile.so">
</member>
<member name="app_record" displayname="Trivial Record Application" remove_on_change="apps/app_record.o apps/app_record.so">
</member>
<member name="app_rpt" displayname="Radio Repeater/Remote Base Application" remove_on_change="apps/app_rpt.o apps/app_rpt.so">
<depend name="dahdi">DAHDI</depend>
<depend>tonezone</depend>
<defaultenabled>no</defaultenabled>
</member>
<member name="app_sayunixtime" displayname="Say time" remove_on_change="apps/app_sayunixtime.o apps/app_sayunixtime.so">
</member>
<member name="app_senddtmf" displayname="Send DTMF digits Application" remove_on_change="apps/app_senddtmf.o apps/app_senddtmf.so">
</member>
<member name="app_sendtext" displayname="Send Text Applications" remove_on_change="apps/app_sendtext.o apps/app_sendtext.so">
</member>
<member name="app_setcallerid" displayname="Set CallerID Presentation Application" remove_on_change="apps/app_setcallerid.o apps/app_setcallerid.so">
</member>
<member name="app_skel" displayname="Skeleton (sample) Application" remove_on_change="apps/app_skel.o apps/app_skel.so">
<defaultenabled>no</defaultenabled>
</member>
<member name="app_sms" displayname="SMS/PSTN handler" remove_on_change="apps/app_sms.o apps/app_sms.so">
</member>
<member name="app_softhangup" displayname="Hangs up the requested channel" remove_on_change="apps/app_softhangup.o apps/app_softhangup.so">
</member>
<member name="app_speech_utils" displayname="Dialplan Speech Applications" remove_on_change="apps/app_speech_utils.o apps/app_speech_utils.so">
</member>
<member name="app_stack" displayname="Dialplan subroutines (Gosub, Return, etc)" remove_on_change="apps/app_stack.o apps/app_stack.so">
</member>
<member name="app_system" displayname="Generic System() application" remove_on_change="apps/app_system.o apps/app_system.so">
</member>
<member name="app_talkdetect" displayname="Playback with Talk Detection" remove_on_change="apps/app_talkdetect.o apps/app_talkdetect.so">
</member>
<member name="app_test" displayname="Interface Test Application" remove_on_change="apps/app_test.o apps/app_test.so">
</member>
<member name="app_transfer" displayname="Transfers a caller to another extension" remove_on_change="apps/app_transfer.o apps/app_transfer.so">
</member>
<member name="app_url" displayname="Send URL Applications" remove_on_change="apps/app_url.o apps/app_url.so">
</member>
<member name="app_userevent" displayname="Custom User Event Application" remove_on_change="apps/app_userevent.o apps/app_userevent.so">
</member>
<member name="app_verbose" displayname="Send verbose output" remove_on_change="apps/app_verbose.o apps/app_verbose.so">
</member>
<member name="app_voicemail" displayname="Comedian Mail (Voicemail System)" remove_on_change="apps/app_voicemail.o apps/app_voicemail.so">
<depend>res_smdi</depend>
</member>
<member name="app_waitforring" displayname="Waits until first ring after time" remove_on_change="apps/app_waitforring.o apps/app_waitforring.so">
</member>
<member name="app_waitforsilence" displayname="Wait For Silence" remove_on_change="apps/app_waitforsilence.o apps/app_waitforsilence.so">
</member>
<member name="app_waituntil" displayname="Wait until specified time" remove_on_change="apps/app_waituntil.o apps/app_waituntil.so">
</member>
<member name="app_while" displayname="While Loops and Conditional Execution" remove_on_change="apps/app_while.o apps/app_while.so">
</member>
<member name="app_zapateller" displayname="Block Telemarketers with Special Information Tone" remove_on_change="apps/app_zapateller.o apps/app_zapateller.so">
</member>
</category>
<category name="MENUSELECT_CDR" displayname="Call Detail Recording" remove_on_change="cdr/modules.link">
<member name="cdr_adaptive_odbc" displayname="Adaptive ODBC CDR backend" remove_on_change="cdr/cdr_adaptive_odbc.o cdr/cdr_adaptive_odbc.so">
<depend name="unixODBC">unixodbc</depend>
</member>
<member name="cdr_csv" displayname="Comma Separated Values CDR Backend" remove_on_change="cdr/cdr_csv.o cdr/cdr_csv.so">
</member>
<member name="cdr_custom" displayname="Customizable Comma Separated Values CDR Backend" remove_on_change="cdr/cdr_custom.o cdr/cdr_custom.so">
</member>
<member name="cdr_manager" displayname="Asterisk Manager Interface CDR Backend" remove_on_change="cdr/cdr_manager.o cdr/cdr_manager.so">
</member>
<member name="cdr_odbc" displayname="ODBC CDR Backend" remove_on_change="cdr/cdr_odbc.o cdr/cdr_odbc.so">
<depend name="unixodbc">unixODBC</depend>
<depend name="ltdl">libtool-ltdl</depend>
</member>
<member name="cdr_pgsql" displayname="PostgreSQL CDR Backend" remove_on_change="cdr/cdr_pgsql.o cdr/cdr_pgsql.so">
<depend name="pgsql">PostgreSQL</depend>
</member>
<member name="cdr_radius" displayname="RADIUS CDR Backend" remove_on_change="cdr/cdr_radius.o cdr/cdr_radius.so">
<depend>radius</depend>
</member>
<member name="cdr_sqlite3_custom" displayname="SQLite3 Custom CDR Module" remove_on_change="cdr/cdr_sqlite3_custom.o cdr/cdr_sqlite3_custom.so">
<depend>sqlite3</depend>
</member>
<member name="cdr_sqlite" displayname="SQLite CDR Backend" remove_on_change="cdr/cdr_sqlite.o cdr/cdr_sqlite.so">
<depend>sqlite</depend>
</member>
<member name="cdr_tds" displayname="FreeTDS CDR Backend" remove_on_change="cdr/cdr_tds.o cdr/cdr_tds.so">
<depend name="freetds">FreeTDS</depend>
</member>
</category>
<category name="MENUSELECT_CHANNELS" displayname="Channel Drivers" remove_on_change="channels/modules.link">
<member name="chan_agent" displayname="Agent Proxy Channel" remove_on_change="channels/chan_agent.o channels/chan_agent.so">
<depend>chan_local</depend>
</member>
<member name="chan_alsa" displayname="ALSA Console Channel Driver" remove_on_change="channels/chan_alsa.o channels/chan_alsa.so">
<depend>asound</depend>
</member>
<member name="chan_console" displayname="Console Channel Driver" remove_on_change="channels/chan_console.o channels/chan_console.so">
<depend>portaudio</depend>
</member>
<member name="chan_dahdi" displayname="DAHDI Telephony" remove_on_change="channels/chan_dahdi.o channels/chan_dahdi.so">
<depend>res_smdi</depend>
<depend name="dahdi">DAHDI</depend>
<depend>tonezone</depend>
<use>pri</use>
<use>ss7</use>
</member>
<member name="chan_features" displayname="Feature Proxy Channel" remove_on_change="channels/chan_features.o channels/chan_features.so">
<defaultenabled>no</defaultenabled>
</member>
<member name="chan_gtalk" displayname="Gtalk Channel Driver" remove_on_change="channels/chan_gtalk.o channels/chan_gtalk.so">
<depend>iksemel</depend>
<depend>res_jabber</depend>
<use>openssl</use>
</member>
<member name="chan_h323" displayname="The NuFone Network's OpenH323 Channel Driver" remove_on_change="channels/chan_h323.o channels/chan_h323.so">
<depend>openh323</depend>
<defaultenabled>yes</defaultenabled>
</member>
<member name="chan_iax2" displayname="Inter Asterisk eXchange (Ver 2)" remove_on_change="channels/chan_iax2.o channels/chan_iax2.so">
<use>crypto</use>
</member>
<member name="chan_jingle" displayname="Jingle Channel Driver" remove_on_change="channels/chan_jingle.o channels/chan_jingle.so">
<depend>iksemel</depend>
<depend>res_jabber</depend>
<use>openssl</use>
</member>
<member name="chan_local" displayname="Local Proxy Channel (Note: used internally by other modules)" remove_on_change="channels/chan_local.o channels/chan_local.so">
</member>
<member name="chan_mgcp" displayname="Media Gateway Control Protocol (MGCP)" remove_on_change="channels/chan_mgcp.o channels/chan_mgcp.so">
</member>
<member name="chan_misdn" displayname="Channel driver for mISDN Support (BRI/PRI)" remove_on_change="channels/chan_misdn.o channels/chan_misdn.so">
<depend>isdnnet</depend>
<depend>misdn</depend>
<depend>suppserv</depend>
</member>
<member name="chan_nbs" displayname="Network Broadcast Sound Support" remove_on_change="channels/chan_nbs.o channels/chan_nbs.so">
<depend>nbs</depend>
</member>
<member name="chan_oss" displayname="OSS Console Channel Driver" remove_on_change="channels/chan_oss.o channels/chan_oss.so">
<depend>ossaudio</depend>
</member>
<member name="chan_phone" displayname="Linux Telephony API Support" remove_on_change="channels/chan_phone.o channels/chan_phone.so">
<depend>ixjuser</depend>
</member>
<member name="chan_sip" displayname="Session Initiation Protocol (SIP)" remove_on_change="channels/chan_sip.o channels/chan_sip.so">
<depend>chan_local</depend>
</member>
<member name="chan_skinny" displayname="Skinny Client Control Protocol (Skinny)" remove_on_change="channels/chan_skinny.o channels/chan_skinny.so">
</member>
<member name="chan_unistim" displayname="UNISTIM Protocol (USTM)" remove_on_change="channels/chan_unistim.o channels/chan_unistim.so">
</member>
<member name="chan_usbradio" displayname="usb Console Channel Driver" remove_on_change="channels/chan_usbradio.o channels/chan_usbradio.so">
<depend>ossaudio</depend>
<depend>usb</depend>
<defaultenabled>no</defaultenabled>
</member>
<member name="chan_vpb" displayname="Voicetronix API driver" remove_on_change="channels/chan_vpb.oo channels/chan_vpb.so">
<depend>vpbapi</depend>
</member>
</category>
<category name="MENUSELECT_CODECS" displayname="Codec Translators" remove_on_change="codecs/modules.link">
<member name="codec_adpcm" displayname="Adaptive Differential PCM Coder/Decoder" remove_on_change="codecs/codec_adpcm.o codecs/codec_adpcm.so">
</member>
<member name="codec_alaw" displayname="A-law Coder/Decoder" remove_on_change="codecs/codec_alaw.o codecs/codec_alaw.so">
</member>
<member name="codec_a_mu" displayname="A-law and Mulaw direct Coder/Decoder" remove_on_change="codecs/codec_a_mu.o codecs/codec_a_mu.so">
</member>
<member name="codec_dahdi" displayname="Generic DAHDI Transcoder Codec Translator" remove_on_change="codecs/codec_dahdi.o codecs/codec_dahdi.so">
<depend name="dahdi">DAHDI</depend>
</member>
<member name="codec_g722" displayname="ITU G.722-64kbps G722 Transcoder" remove_on_change="codecs/codec_g722.o codecs/codec_g722.so">
</member>
<member name="codec_g726" displayname="ITU G.726-32kbps G726 Transcoder" remove_on_change="codecs/codec_g726.o codecs/codec_g726.so">
</member>
<member name="codec_gsm" displayname="GSM Coder/Decoder" remove_on_change="codecs/codec_gsm.o codecs/codec_gsm.so">
<depend>gsm</depend>
</member>
<member name="codec_ilbc" displayname="iLBC Coder/Decoder" remove_on_change="codecs/codec_ilbc.o codecs/codec_ilbc.so">
<defaultenabled>no</defaultenabled>
</member>
<member name="codec_lpc10" displayname="LPC10 2.4kbps Coder/Decoder" remove_on_change="codecs/codec_lpc10.o codecs/codec_lpc10.so">
</member>
<member name="codec_resample" displayname="SLIN Resampling Codec" remove_on_change="codecs/codec_resample.o codecs/codec_resample.so">
<depend>resample</depend>
</member>
<member name="codec_speex" displayname="Speex Coder/Decoder" remove_on_change="codecs/codec_speex.o codecs/codec_speex.so">
<depend>speex</depend>
<depend>speex_preprocess</depend>
<use>speexdsp</use>
</member>
<member name="codec_ulaw" displayname="mu-Law Coder/Decoder" remove_on_change="codecs/codec_ulaw.o codecs/codec_ulaw.so">
</member>
</category>
<category name="MENUSELECT_FORMATS" displayname="Format Interpreters" remove_on_change="formats/modules.link">
<member name="format_g723" displayname="G.723.1 Simple Timestamp File Format" remove_on_change="formats/format_g723.o formats/format_g723.so">
</member>
<member name="format_g726" displayname="Raw G.726 (16/24/32/40kbps) data" remove_on_change="formats/format_g726.o formats/format_g726.so">
</member>
<member name="format_g729" displayname="Raw G729 data" remove_on_change="formats/format_g729.o formats/format_g729.so">
</member>
<member name="format_gsm" displayname="Raw GSM data" remove_on_change="formats/format_gsm.o formats/format_gsm.so">
</member>
<member name="format_h263" displayname="Raw H.263 data" remove_on_change="formats/format_h263.o formats/format_h263.so">
</member>
<member name="format_h264" displayname="Raw H.264 data" remove_on_change="formats/format_h264.o formats/format_h264.so">
</member>
<member name="format_ilbc" displayname="Raw iLBC data" remove_on_change="formats/format_ilbc.o formats/format_ilbc.so">
</member>
<member name="format_jpeg" displayname="JPEG (Joint Picture Experts Group) Image Format" remove_on_change="formats/format_jpeg.o formats/format_jpeg.so">
</member>
<member name="format_ogg_vorbis" displayname="OGG/Vorbis audio" remove_on_change="formats/format_ogg_vorbis.o formats/format_ogg_vorbis.so">
<depend>vorbis</depend>
<depend>ogg</depend>
</member>
<member name="format_pcm" displayname="Raw/Sun uLaw/ALaw 8KHz (PCM,PCMA,AU), G.722 16Khz" remove_on_change="formats/format_pcm.o formats/format_pcm.so">
</member>
<member name="format_sln16" displayname="Raw Signed Linear 16KHz Audio support (SLN16)" remove_on_change="formats/format_sln16.o formats/format_sln16.so">
</member>
<member name="format_sln" displayname="Raw Signed Linear Audio support (SLN)" remove_on_change="formats/format_sln.o formats/format_sln.so">
</member>
<member name="format_vox" displayname="Dialogic VOX (ADPCM) File Format" remove_on_change="formats/format_vox.o formats/format_vox.so">
</member>
<member name="format_wav" displayname="Microsoft WAV format (8000Hz Signed Linear)" remove_on_change="formats/format_wav.o formats/format_wav.so">
</member>
<member name="format_wav_gsm" displayname="Microsoft WAV format (Proprietary GSM)" remove_on_change="formats/format_wav_gsm.o formats/format_wav_gsm.so">
</member>
</category>
<category name="MENUSELECT_FUNCS" displayname="Dialplan Functions" remove_on_change="funcs/modules.link">
<member name="func_base64" displayname="base64 encode/decode dialplan functions" remove_on_change="funcs/func_base64.o funcs/func_base64.so">
</member>
<member name="func_blacklist" displayname="Look up Caller*ID name/number from blacklist database" remove_on_change="funcs/func_blacklist.o funcs/func_blacklist.so">
</member>
<member name="func_callerid" displayname="Caller ID related dialplan functions" remove_on_change="funcs/func_callerid.o funcs/func_callerid.so">
</member>
<member name="func_cdr" displayname="Call Detail Record (CDR) dialplan function" remove_on_change="funcs/func_cdr.o funcs/func_cdr.so">
</member>
<member name="func_channel" displayname="Channel information dialplan functions" remove_on_change="funcs/func_channel.o funcs/func_channel.so">
</member>
<member name="func_config" displayname="Asterisk configuration file variable access" remove_on_change="funcs/func_config.o funcs/func_config.so">
</member>
<member name="func_curl" displayname="Load external URL" remove_on_change="funcs/func_curl.o funcs/func_curl.so">
<depend>curl</depend>
</member>
<member name="func_cut" displayname="Cut out information from a string" remove_on_change="funcs/func_cut.o funcs/func_cut.so">
</member>
<member name="func_db" displayname="Database (astdb) related dialplan functions" remove_on_change="funcs/func_db.o funcs/func_db.so">
</member>
<member name="func_devstate" displayname="Gets or sets a device state in the dialplan" remove_on_change="funcs/func_devstate.o funcs/func_devstate.so">
</member>
<member name="func_dialgroup" displayname="Dialgroup dialplan function" remove_on_change="funcs/func_dialgroup.o funcs/func_dialgroup.so">
</member>
<member name="func_dialplan" displayname="Dialplan Context/Extension/Priority Checking Functions" remove_on_change="funcs/func_dialplan.o funcs/func_dialplan.so">
</member>
<member name="func_enum" displayname="ENUM related dialplan functions" remove_on_change="funcs/func_enum.o funcs/func_enum.so">
</member>
<member name="func_env" displayname="Environment/filesystem dialplan functions" remove_on_change="funcs/func_env.o funcs/func_env.so">
</member>
<member name="func_extstate" displayname="Gets an extension's state in the dialplan" remove_on_change="funcs/func_extstate.o funcs/func_extstate.so">
</member>
<member name="func_global" displayname="Variable dialplan functions" remove_on_change="funcs/func_global.o funcs/func_global.so">
</member>
<member name="func_groupcount" displayname="Channel group dialplan functions" remove_on_change="funcs/func_groupcount.o funcs/func_groupcount.so">
</member>
<member name="func_iconv" displayname="Charset conversions" remove_on_change="funcs/func_iconv.o funcs/func_iconv.so">
<depend>iconv</depend>
</member>
<member name="func_lock" displayname="Dialplan mutexes" remove_on_change="funcs/func_lock.o funcs/func_lock.so">
</member>
<member name="func_logic" displayname="Logical dialplan functions" remove_on_change="funcs/func_logic.o funcs/func_logic.so">
</member>
<member name="func_math" displayname="Mathematical dialplan function" remove_on_change="funcs/func_math.o funcs/func_math.so">
</member>
<member name="func_md5" displayname="MD5 digest dialplan functions" remove_on_change="funcs/func_md5.o funcs/func_md5.so">
</member>
<member name="func_module" displayname="Checks if Asterisk module is loaded in memory" remove_on_change="funcs/func_module.o funcs/func_module.so">
</member>
<member name="func_odbc" displayname="ODBC lookups" remove_on_change="funcs/func_odbc.o funcs/func_odbc.so">
<depend>unixodbc</depend>
<depend>ltdl</depend>
<depend>res_odbc</depend>
</member>
<member name="func_rand" displayname="Random number dialplan function" remove_on_change="funcs/func_rand.o funcs/func_rand.so">
</member>
<member name="func_realtime" displayname="Read/Write/Store/Destroy values from a RealTime repository" remove_on_change="funcs/func_realtime.o funcs/func_realtime.so">
</member>
<member name="func_sha1" displayname="SHA-1 computation dialplan function" remove_on_change="funcs/func_sha1.o funcs/func_sha1.so">
</member>
<member name="func_shell" displayname="Returns the output of a shell command" remove_on_change="funcs/func_shell.o funcs/func_shell.so">
</member>
<member name="func_speex" displayname="Noise reduction and Automatic Gain Control (AGC)" remove_on_change="funcs/func_speex.o funcs/func_speex.so">
<depend>speex</depend>
<depend>speex_preprocess</depend>
<use>speexdsp</use>
</member>
<member name="func_strings" displayname="String handling dialplan functions" remove_on_change="funcs/func_strings.o funcs/func_strings.so">
</member>
<member name="func_sysinfo" displayname="System information related functions" remove_on_change="funcs/func_sysinfo.o funcs/func_sysinfo.so">
</member>
<member name="func_timeout" displayname="Channel timeout dialplan functions" remove_on_change="funcs/func_timeout.o funcs/func_timeout.so">
</member>
<member name="func_uri" displayname="URI encode/decode dialplan functions" remove_on_change="funcs/func_uri.o funcs/func_uri.so">
</member>
<member name="func_version" displayname="Get Asterisk Version/Build Info" remove_on_change="funcs/func_version.o funcs/func_version.so">
</member>
<member name="func_vmcount" displayname="Indicator for whether a voice mailbox has messages in a given folder." remove_on_change="funcs/func_vmcount.o funcs/func_vmcount.so">
</member>
<member name="func_volume" displayname="Technology independent volume control" remove_on_change="funcs/func_volume.o funcs/func_volume.so">
</member>
</category>
<category name="MENUSELECT_PBX" displayname="PBX Modules" remove_on_change="pbx/modules.link">
<member name="pbx_ael" displayname="Asterisk Extension Language Compiler" remove_on_change="pbx/pbx_ael.o pbx/pbx_ael.so">
<depend>res_ael_share</depend>
</member>
<member name="pbx_config" displayname="Text Extension Configuration" remove_on_change="pbx/pbx_config.o pbx/pbx_config.so">
</member>
<member name="pbx_dundi" displayname="Distributed Universal Number Discovery (DUNDi)" remove_on_change="pbx/pbx_dundi.o pbx/pbx_dundi.so">
<depend>zlib</depend>
<use>crypto</use>
</member>
<member name="pbx_gtkconsole" displayname="GTK Console" remove_on_change="pbx/pbx_gtkconsole.o pbx/pbx_gtkconsole.so">
<depend>gtk</depend>
<defaultenabled>no</defaultenabled>
</member>
<member name="pbx_loopback" displayname="Loopback Switch" remove_on_change="pbx/pbx_loopback.o pbx/pbx_loopback.so">
</member>
<member name="pbx_lua" displayname="Lua PBX Switch" remove_on_change="pbx/pbx_lua.o pbx/pbx_lua.so">
<depend>lua</depend>
</member>
<member name="pbx_realtime" displayname="Realtime Switch" remove_on_change="pbx/pbx_realtime.o pbx/pbx_realtime.so">
</member>
<member name="pbx_spool" displayname="Outgoing Spool Support" remove_on_change="pbx/pbx_spool.o pbx/pbx_spool.so">
</member>
</category>
<category name="MENUSELECT_RES" displayname="Resource Modules" remove_on_change="res/modules.link">
<member name="res_adsi" displayname="ADSI Resource" remove_on_change="res/res_adsi.o res/res_adsi.so">
</member>
<member name="res_ael_share" displayname="share-able code for AEL" remove_on_change="res/res_ael_share.o res/res_ael_share.so">
</member>
<member name="res_agi" displayname="Asterisk Gateway Interface (AGI)" remove_on_change="res/res_agi.o res/res_agi.so">
</member>
<member name="res_ais" displayname="SAForum AIS" remove_on_change="res/res_ais.o res/res_ais.so">
<depend>ais</depend>
</member>
<member name="res_clioriginate" displayname="Call origination from the CLI" remove_on_change="res/res_clioriginate.o res/res_clioriginate.so">
</member>
<member name="res_config_curl" displayname="Realtime Curl configuration" remove_on_change="res/res_config_curl.o res/res_config_curl.so">
<depend>curl</depend>
</member>
<member name="res_config_ldap" displayname="LDAP realtime interface" remove_on_change="res/res_config_ldap.o res/res_config_ldap.so">
<depend>ldap</depend>
</member>
<member name="res_config_odbc" displayname="Realtime ODBC configuration" remove_on_change="res/res_config_odbc.o res/res_config_odbc.so">
<depend>unixodbc</depend>
<depend>ltdl</depend>
<depend>res_odbc</depend>
</member>
<member name="res_config_pgsql" displayname="PostgreSQL RealTime Configuration Driver" remove_on_change="res/res_config_pgsql.o res/res_config_pgsql.so">
<depend>pgsql</depend>
</member>
<member name="res_config_sqlite" displayname="Realtime SQLite configuration" remove_on_change="res/res_config_sqlite.o res/res_config_sqlite.so">
<depend>sqlite</depend>
</member>
<member name="res_convert" displayname="File format conversion CLI command" remove_on_change="res/res_convert.o res/res_convert.so">
</member>
<member name="res_crypto" displayname="Cryptographic Digital Signatures" remove_on_change="res/res_crypto.o res/res_crypto.so">
<depend>ssl</depend>
</member>
<member name="res_curl" displayname="cURL Resource Module" remove_on_change="res/res_curl.o res/res_curl.so">
<depend>curl</depend>
</member>
<member name="res_http_post" displayname="HTTP POST support" remove_on_change="res/res_http_post.o res/res_http_post.so">
<depend>gmime</depend>
</member>
<member name="res_indications" displayname="Region-specific tones" remove_on_change="res/res_indications.o res/res_indications.so">
</member>
<member name="res_jabber" displayname="AJI - Asterisk Jabber Interface" remove_on_change="res/res_jabber.o res/res_jabber.so">
<depend>iksemel</depend>
<use>openssl</use>
</member>
<member name="res_limit" displayname="Resource limits" remove_on_change="res/res_limit.o res/res_limit.so">
</member>
<member name="res_monitor" displayname="Call Monitoring Resource" remove_on_change="res/res_monitor.o res/res_monitor.so">
</member>
<member name="res_musiconhold" displayname="Music On Hold Resource" remove_on_change="res/res_musiconhold.o res/res_musiconhold.so">
<conflict>win32</conflict>
<use>dahdi</use>
</member>
<member name="res_odbc" displayname="ODBC resource" remove_on_change="res/res_odbc.o res/res_odbc.so">
<depend>unixodbc</depend>
<depend>ltdl</depend>
</member>
<member name="res_phoneprov" displayname="HTTP Phone Provisioning" remove_on_change="res/res_phoneprov.o res/res_phoneprov.so">
</member>
<member name="res_realtime" displayname="Realtime Data Lookup/Rewrite" remove_on_change="res/res_realtime.o res/res_realtime.so">
</member>
<member name="res_smdi" displayname="Simplified Message Desk Interface (SMDI) Resource" remove_on_change="res/res_smdi.o res/res_smdi.so">
</member>
<member name="res_snmp" displayname="SNMP [Sub]Agent for Asterisk" remove_on_change="res/res_snmp.o res/res_snmp.so">
<depend>netsnmp</depend>
</member>
<member name="res_speech" displayname="Generic Speech Recognition API" remove_on_change="res/res_speech.o res/res_speech.so">
</member>
<member name="res_timing_dahdi" displayname="DAHDI Timing Interface" remove_on_change="res/res_timing_dahdi.o res/res_timing_dahdi.so">
<depend name="dahdi">DAHDI</depend>
</member>
<member name="res_timing_pthread" displayname="pthread Timing Interface" remove_on_change="res/res_timing_pthread.o res/res_timing_pthread.so">
</member>
</category>
<category name="MENUSELECT_TEST" displayname="Test Modules" remove_on_change="tests/modules.link">
<member name="test_dlinklists" displayname="Test Doubly-Linked Lists" remove_on_change="tests/test_dlinklists.o tests/test_dlinklists.so">
<defaultenabled>no</defaultenabled>
</member>
<member name="test_skel" displayname="Skeleton (sample) Test" remove_on_change="tests/test_skel.o tests/test_skel.so">
<defaultenabled>no</defaultenabled>
</member>
</category>
<category name="MENUSELECT_CFLAGS" displayname="Compiler Flags" positive_output="yes" remove_on_change=".lastclean">
<member name="DONT_OPTIMIZE" displayname="Disable Optimizations by the Compiler">
</member>
<member name="DEBUG_THREADS" displayname="Enable Thread Debugging">
</member>
<member name="STATIC_BUILD" displayname="Build static binaries">
</member>
<member name="LOADABLE_MODULES" displayname="Runtime module loading">
<defaultenabled>yes</defaultenabled>
</member>
<member name="LOW_MEMORY" displayname="Optimize for Low Memory Usage">
</member>
<member name="USE_HOARD_ALLOCATOR" displayname="Use the Hoard Memory Allocator instead of the default system one">
<defaultenabled>no</defaultenabled>
<depend>hoard</depend>
</member>
<member name="LOTS_OF_SPANS" displayname="More than 32 DAHDI spans">
</member>
<member name="RADIO_RELAX" displayname="Relax DTMF for Radio Applications">
</member>
<member name="G711_NEW_ALGORITHM" displayname="Use the NEW ulaw/alaw codecs (slower, but cleaner)">
<defaultenabled>no</defaultenabled>
</member>
<member name="G711_REDUCED_BRANCHING" displayname="New ulaw/alaw codec, reduced branching (might help it run faster in some architectures)">
<defaultenabled>yes</defaultenabled>
<depend>G711_NEW_ALGORITHM</depend>
</member>
<member name="TEST_CODING_TABLES" displayname="New ulaw/alaw codec, turn on table tests on init">
<depend>G711_NEW_ALGORITHM</depend>
</member>
<member name="TEST_TANDEM_TRANSCODING" displayname="New ulaw/alaw codec, turn on transcoding tests on init">
<depend>G711_NEW_ALGORITHM</depend>
</member>
<member name="DEBUG_CHANNEL_LOCKS" displayname="Debug Channel Locking">
</member>
<member name="MALLOC_DEBUG" displayname="Keep Track of Memory Allocations">
</member>
<member name="BUSYDETECT_TONEONLY" displayname="Enable additional comparision of only the tone duration not the silence part">
<conflict>BUSYDETECT_COMPARE_TONE_AND_SILENCE</conflict>
<defaultenabled>no</defaultenabled>
</member>
<member name="BUSYDETECT_COMPARE_TONE_AND_SILENCE" displayname="Assume that tone and silence have the same duration">
<conflict>BUSYDETECT_TONEONLY</conflict>
<defaultenabled>no</defaultenabled>
</member>
<member name="BUSYDETECT_DEBUG" displayname="Enable additional busy detection debugging">
<defaultenabled>no</defaultenabled>
</member>
<member name="IAX_OLD_FIND" displayname="Use the old, slow method of searching for IAX callnos">
</member>
<member name="INTEGER_CALLERID" displayname="Use the (less accurate) integer-based method for decoding FSK tones (for embedded systems)">
</member>
</category>
<category name="MENUSELECT_OPTS_app_voicemail" displayname="Voicemail Build Options" positive_output="yes" remove_on_change="apps/app_voicemail.o apps/app_directory.o">
<member name="ODBC_STORAGE" displayname="Storage of Voicemail using ODBC">
<depend>unixodbc</depend>
<depend>ltdl</depend>
<conflict>IMAP_STORAGE</conflict>
<defaultenabled>no</defaultenabled>
</member>
<member name="IMAP_STORAGE" displayname="Storage of Voicemail using IMAP4">
<depend>imap_tk</depend>
<conflict>ODBC_STORAGE</conflict>
<use>ssl</use>
<defaultenabled>no</defaultenabled>
</member>
</category>
<category name="MENUSELECT_CFLAGS" displayname="Compiler Flags" positive_output="yes" remove_on_change=".lastclean">
<member name="RADIO_RTX" displayname="Build RTX/DTX Radio Programming">
<defaultenabled>no</defaultenabled>
<depend>chan_usbradio</depend>
</member>
<member name="RADIO_XPMRX" displayname="Build Experimental Radio Protocols">
<defaultenabled>no</defaultenabled>
<depend>chan_usbradio</depend>
</member>
</category>
<category name="MENUSELECT_CFLAGS" displayname="Compiler Flags - Development">
<member name="MTX_PROFILE" displayname="Enable Code Profiling Using TSC Counters">
</member>
<member name="DEBUG_SCHEDULER" displayname="Enable Scheduler Debugging Output">
</member>
<member name="DEBUG_THREADLOCALS" displayname="Enable Thread-Local-Storage Debugging">
</member>
<member name="DETECT_DEADLOCKS" displayname="Detect Deadlocks">
<depend>DEBUG_THREADS</depend>
</member>
<member name="DUMP_SCHEDULER" displayname="Dump Scheduler Contents for Debugging">
</member>
<member name="TRACE_FRAMES" displayname="Trace Frame Allocations">
</member>
<member name="DO_CRASH" displayname="Crash on fatal errors">
</member>
<member name="THREAD_CRASH" displayname="Crash on mutex errors">
</member>
<member name="CHANNEL_TRACE" displayname="Enable CHANNEL(trace) function">
</member>
</category>
<category name="MENUSELECT_EMBED" displayname="Module Embedding" positive_output="yes" remove_on_change="main/asterisk">
<member name="APPS" displayname="Applications" remove_on_change="apps/*.o">
<depend>gnu_ld</depend>
</member>
<member name="CDR" displayname="Call Detail Recording" remove_on_change="cdr/*.o">
<depend>gnu_ld</depend>
</member>
<member name="CHANNELS" displayname="Channels" remove_on_change="channels/*.o channels/misdn/*.o">
<depend>gnu_ld</depend>
</member>
<member name="CODECS" displayname="Coders/Decoders" remove_on_change="codecs/*.o codecs/gsm/src/*.o codecs/ilbc/*.o codecs/lpc10/*.o codecs/gsm/lib/libgsm.a codecs/lpc10/liblpc10.a codecs/ilbc/libilbc.a codecs/g722/libg722.a">
<depend>gnu_ld</depend>
</member>
<member name="FORMATS" displayname="File Formats" remove_on_change="formats/*.o">
<depend>gnu_ld</depend>
</member>
<member name="FUNCS" displayname="Dialplan Functions" remove_on_change="funcs/*.o">
<depend>gnu_ld</depend>
</member>
<member name="PBX" displayname="PBX Functionality" remove_on_change="pbx/*.o pbx/ael/*.o">
<depend>gnu_ld</depend>
</member>
<member name="RES" displayname="Resource Modules" remove_on_change="res/*.o res/snmp/*.o">
<depend>gnu_ld</depend>
</member>
</category>
<category name="MENUSELECT_CORE_SOUNDS" displayname="Core Sound Packages" positive_output="yes">
<member name="CORE-SOUNDS-EN-WAV" displayname="English, WAV format">
</member>
<member name="CORE-SOUNDS-EN-ULAW" displayname="English, mu-Law format">
</member>
<member name="CORE-SOUNDS-EN-ALAW" displayname="English, a-Law format">
</member>
<member name="CORE-SOUNDS-EN-GSM" displayname="English, GSM format" >
<defaultenabled>yes</defaultenabled>
</member>
<member name="CORE-SOUNDS-EN-G729" displayname="English, G.729 format">
</member>
<member name="CORE-SOUNDS-EN-G722" displayname="English, G.722 format">
</member>
<member name="CORE-SOUNDS-EN-SLN16" displayname="English, Signed-linear 16kHz format">
</member>
<member name="CORE-SOUNDS-ES-WAV" displayname="Spanish, WAV format">
</member>
<member name="CORE-SOUNDS-ES-ULAW" displayname="Spanish, mu-Law format">
</member>
<member name="CORE-SOUNDS-ES-ALAW" displayname="Spanish, a-Law format">
</member>
<member name="CORE-SOUNDS-ES-GSM" displayname="Spanish, GSM format">
</member>
<member name="CORE-SOUNDS-ES-G729" displayname="Spanish, G.729 format">
</member>
<member name="CORE-SOUNDS-ES-G722" displayname="Spanish, G.722 format">
</member>
<member name="CORE-SOUNDS-ES-SLN16" displayname="Spanish, Signed-linear 16kHz format">
</member>
<member name="CORE-SOUNDS-FR-WAV" displayname="French, WAV format">
</member>
<member name="CORE-SOUNDS-FR-ULAW" displayname="French, mu-Law format">
</member>
<member name="CORE-SOUNDS-FR-ALAW" displayname="French, a-Law format">
</member>
<member name="CORE-SOUNDS-FR-GSM" displayname="French, GSM format">
</member>
<member name="CORE-SOUNDS-FR-G729" displayname="French, G.729 format">
</member>
<member name="CORE-SOUNDS-FR-G722" displayname="French, G.722 format">
</member>
<member name="CORE-SOUNDS-FR-SLN16" displayname="French, Signed-linear 16kHz format">
</member>
</category>
<category name="MENUSELECT_EXTRA_SOUNDS" displayname="Extras Sound Packages" positive_output="yes">
<member name="EXTRA-SOUNDS-EN-WAV" displayname="English, WAV format">
</member>
<member name="EXTRA-SOUNDS-EN-ULAW" displayname="English, mu-Law format">
</member>
<member name="EXTRA-SOUNDS-EN-ALAW" displayname="English, a-Law format">
</member>
<member name="EXTRA-SOUNDS-EN-GSM" displayname="English, GSM format" >
</member>
<member name="EXTRA-SOUNDS-EN-G729" displayname="English, G.729 format">
</member>
<member name="EXTRA-SOUNDS-EN-G722" displayname="English, G.722 format">
</member>
</category>
</menu>