dahdi-tools/doc/span_types.8

147 lines
3.9 KiB
Groff
Raw Normal View History

.TH "SPAN_TYPES" "8" "13 Oct 2013" "" ""
.SH NAME
span_types \- set DAHDI spans properties before registration (E1/T1)
.SH SYNOPSIS
.B span_types <list|dumpconfig|set> [\fIdevpath \fB[\fIdevpath \fB...]]
.SH DESCRIPTION
The span type (E1/T1/J1) must be set to a span before registering it
with DAHDI, as E1 spans use more channels. \fBspan_types\fR applies the
span type configuration to an unregistered span.
Using it only makes sense when the kernel module parameter
\fBdahdi.auto_assign_span\fR is unset, otherwise the DAHDI spans register
automatically.
.SH OPTIONS
.B span_types
takes a command and an optional list of devices. If no device is given,
the command is applied to all devices.
The device is marked as a path in the SysFS tree.
.B set
.RS
Reads settings from \fBspan-types.conf\fR and applies them to the
device(s) specified in the command line (or all devices, if none
specified).
.RE
.B list
.RS
List types for all spans in the system which may be set with span_types
(E1/T1/J1 spans).
.RE
.B dumpconfig
.RS
List types for the spans in a format fit to be used in
\fBspan-types.conf\fR. Use this to generate a configuration file after
you have (perhaps manually) set all existing spans.
.B dahdi_genconf spantypes
uses this command internally.
.RE
.SH CONFIGURATION
.B span-types.conf
is a file with lines specifying registration of spans.
Empty lines or lines beginning with '#' are ignored.
Each line is in the format of:
.I ID spanspec ...
The \fIID\fR field specifies the DAHDI device and the \fIspanspecs\fR
define how to register its spans. A line may have multiple
\fIspanspecs\fR in a single line (though dumpconfig generates a
configuration with one per line).
.SS Span Identifier
A DAHDI device may be specified either by a hardware identifier (a
software readable serial number or whatever) or the location in which
it is installed on the system. The former makes it simpler to change
connector / slot whereas the latter makes it simpler to replace a unit.
The value in this field is matched (when the commands \fBadd\fR and
\fBremove\fR) are used) to the following values:
\fIhwid\fR
\fB@\fIlocation\fR
\fIdevpath\fR
See above for their descriptions. The value may include shell wildcards:
*, ? and [], which are used in the match. The values to be matched are
first cleaned up: '!' is replaced with '/' and any character beyond
"a-zA-Z0-9/:.-" is removed.
.SS Span Specification
Each line should have one or more span specifications: this is the value
used to register a span with DAHDI in the SysFS interface. A
specification has three colon-separated numbers:
.I rel_span_no:span_type
for instance, the following are four span specifications specify ports 1 and 2 as E1 and ports 3 and 4 as T1: [12]:E1 [34]:T1 .
.B rel_span_no
.RS
The relative number of the span in the device. E.g.: port number.
.RE
.B span_type
.RS
E1/T1/J1
.RE
.SH ENVIRONMENT
.B DAHDICONFDIR
.RS
The directory in which span-types.conf resides. /etc/dahdi if not
overridden from the environment.
.RE
.B span_types_conf
.RS
The path to span-types.conf resides. /etc/dahdi/span-types.conf if
not overridden from the environment.
.RE
.SH FILES
.B /etc/dahdi/span-types.conf
.RS
The default location for the configuration file.
.RE
.B /sys/bus/dahdi_devices/devices/\fIdevice\fR
.RS
SysFS node for the device. In this directory reside the following
files, among others:
.B spantype
.RS
read/write file. Reading from it returns current configuration for spans
of the device. Span-specifications can be written to it to change types
(but only for a span that is not registered).
.RE
.SH SEE ALSO
span_assignments(8), dahdi_genconf(8), dahdi_cfg(8)
.SH AUTHOR
span_types was written by Oron Peled. This manual page was
written by Tzafrir Cohen. Permission is granted to copy, distribute
and/or modify this document under the terms of the GNU General Public
License, Version 2 any later version published by the Free Software
Foundation.