dahdi-tools/dahdi.init

344 lines
8.3 KiB
Plaintext
Raw Permalink Normal View History

#!/bin/sh
#
# dahdi This shell script takes care of loading and unloading \
# DAHDI Telephony interfaces
# chkconfig: 2345 9 92
# description: The DAHDI drivers allow you to use your linux \
# computer to accept incoming data and voice interfaces
#
# config: /etc/dahdi/init.conf
### BEGIN INIT INFO
# Provides: dahdi
# Required-Start: $local_fs $remote_fs
# Required-Stop: $local_fs $remote_fs
# Should-Start: $network $syslog
# Should-Stop: $network $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: DAHDI kernel modules
# Description: dahdi - load and configure DAHDI modules
### END INIT INFO
initdir=/etc/init.d
# Don't edit the following values. Edit /etc/dahdi/init.conf instead.
DAHDI_CFG=/usr/sbin/dahdi_cfg
DAHDI_CFG_CMD=${DAHDI_CFG_CMD:-"$DAHDI_CFG"} # e.g: for a custom system.conf location
FXOTUNE=/usr/sbin/fxotune
# The default syncer Astribank. Usually set automatically to a sane
# value by xpp_sync(1) if you have an Astribank. You can set this to an
# explicit Astribank (e.g: 01).
XPP_SYNC=auto
# The maximal timeout (seconds) to wait for udevd to finish generating
# device nodes after the modules have loaded and before running dahdi_cfg.
DAHDI_DEV_TIMEOUT=20
# A list of modules to unload when stopping.
# All of their dependencies will be unloaded as well.
DAHDI_UNLOAD_MODULES="dahdi"
#
# Determine which kind of configuration we're using
#
system=redhat # assume redhat
if [ -f /etc/debian_version ]; then
system=debian
fi
if [ -f /etc/gentoo-release ]; then
system=debian
fi
if [ -f /etc/SuSE-release -o -f /etc/novell-release ]
then
system=debian
fi
# Source function library.
if [ $system = redhat ]; then
. $initdir/functions || exit 0
fi
DAHDI_MODULES_FILE="/etc/dahdi/modules"
[ -r /etc/dahdi/init.conf ] && . /etc/dahdi/init.conf
if [ $system = redhat ]; then
LOCKFILE=/var/lock/subsys/dahdi
fi
# recursively unload a module and its dependencies, if possible.
# where's modprobe -r when you need it?
# inputs: module to unload.
# returns: the result from
unload_module() {
module="$1"
line=`lsmod 2>/dev/null | grep "^$1 "`
if [ "$line" = '' ]; then return; fi # module was not loaded
set -- $line
# $1: the original module, $2: size, $3: refcount, $4: deps list
mods=`echo $4 | tr , ' '`
ec_modules=""
# xpp_usb keeps the xpds below busy if an xpp hardware is
# connected. Hence must be removed before them:
case "$module" in xpd_*) mods="xpp_usb $mods";; esac
for mod in $mods; do
case "$mod" in
dahdi_echocan_*)
ec_modules="$mod $ec_modules"
;;
*)
# run in a subshell, so it won't step over our vars:
(unload_module $mod)
;;
esac
done
# Now that all the other dependencies are unloaded, we can unload the
# dahdi_echocan modules. The drivers that register spans may keep
# references on the echocan modules before they are unloaded.
for mod in $ec_modules; do
(unload_module $mod)
done
rmmod $module
}
unload_modules() {
for module in $DAHDI_UNLOAD_MODULES; do
unload_module $module
done
}
# In (xpp) hotplug mode, the init script is also executed from the
# hotplug hook. In that case it should not attempt to loade modules.
#
# This function only retunrs false (1) if we're in hotplug mode and
# coming from the hotplug hook script.
hotplug_should_load_modules() {
if [ "$XPP_HOTPLUG_DAHDI" = yes -a "$CALLED_FROM_ATRIBANK_HOOK" != '' ]
then
return 1
fi
return 0
}
# In (xpp) hotplug mode: quit after we loaded modules.
#
# In hotplug mode, the main run should end here, whereas the rest of the
# script should be finished by the instance running from the hook.
# Note that we only get here if there are actually Astribanks on the
# system (otherwise noone will trigger the run of the hotplug hook
# script).
hotplug_exit_after_load() {
if [ "$XPP_HOTPLUG_DAHDI" = yes -a "$CALLED_FROM_ATRIBANK_HOOK" = '' ]
then
exit 0
fi
}
# Initialize the Xorcom Astribank (xpp/) using perl utiliites:
xpp_startup() {
if [ "$ASTERISK_SUPPORTS_DAHDI_HOTPLUG" = yes ]; then
aas_param='/sys/module/dahdi/parameters/auto_assign_spans'
aas=`cat "$aas_param" 2>/dev/null`
if [ "$aas" = 0 ]; then
echo 1>&2 "Don't wait for Astribanks (use Asterisk hotplug-support)"
return 0
fi
fi
# do nothing if there are no astribank devices:
if ! /usr/share/dahdi/waitfor_xpds; then return 0; fi
hotplug_exit_after_load
}
hpec_start() {
# HPEC license found
if ! echo /var/lib/digium/licenses/HPEC-*.lic | grep -v '\*' | grep -q .; then
return
fi
# dahdihpec_enable not installed in /usr/sbin
if [ ! -f /usr/sbin/dahdihpec_enable ]; then
echo -n "Running dahdihpec_enable: Failed"
echo -n "."
echo " The dahdihpec_enable binary is not installed in /usr/sbin."
return
fi
# dahdihpec_enable not set executable
if [ ! -x /usr/sbin/dahdihpec_enable ]; then
echo -n "Running dahdihpec_enable: Failed"
echo -n "."
echo " /usr/sbin/dahdihpec_enable is not set as executable."
return
fi
# dahdihpec_enable properly installed
if [ $system = debian ]; then
echo -n "Running dahdihpec_enable: "
/usr/sbin/dahdihpec_enable 2> /dev/null
elif [ $system = redhat ]; then
action "Running dahdihpec_enable: " /usr/sbin/dahdihpec_enable
fi
if [ $? = 0 ]; then
echo -n "done"
echo "."
else
echo -n "Failed"
echo -n "."
echo " This can be caused if you had already run dahdihpec_enable, or if your HPEC license is no longer valid."
fi
}
shutdown_dynamic() {
if ! grep -q ' DYN/' /proc/dahdi/* 2>/dev/null; then return; fi
# we should only get here if we have dynamic spans. Right?
$DAHDI_CFG_CMD -s
}
load_modules() {
# Some systems, e.g. Debian Lenny, add here -b, which will break
# loading of modules blacklisted in modprobe.d/*
unset MODPROBE_OPTIONS
modules=`sed -e 's/#.*$//' $DAHDI_MODULES_FILE 2>/dev/null`
#if [ "$modules" = '' ]; then
# what?
#fi
echo "Loading DAHDI hardware modules:"
modprobe dahdi
for line in $modules; do
if [ $system = debian ]; then
echo -n " ${line}: "
if modprobe $line 2> /dev/null; then
echo -n "done"
else
echo -n "error"
fi
elif [ $system = redhat ]; then
action " ${line}: " modprobe $line
fi
done
echo ""
}
# Make sure that either dahdi is loaded or modprobe-able
dahdi_modules_loadable() {
modinfo dahdi >/dev/null 2>&1 || lsmod | grep -q -w ^dahdi
}
if [ ! -x "$DAHDI_CFG" ]; then
echo "dahdi_cfg not executable"
exit 0
fi
RETVAL=0
# See how we were called.
case "$1" in
start)
if ! dahdi_modules_loadable; then
echo "No DAHDI modules on the system. Not starting"
exit 0
fi
if hotplug_should_load_modules; then
load_modules
fi
TMOUT=$DAHDI_DEV_TIMEOUT # max secs to wait
while [ ! -d /dev/dahdi ] ; do
sleep 1
TMOUT=`expr $TMOUT - 1`
if [ $TMOUT -eq 0 ] ; then
echo "Error: missing /dev/dahdi!"
exit 1
fi
done
xpp_startup
# Assign all spans that weren't handled via udev + /etc/dahdi/assigned-spans.conf
/usr/share/dahdi/dahdi_auto_assign_compat
if [ $system = debian ]; then
echo -n "Running dahdi_cfg: "
$DAHDI_CFG_CMD 2> /dev/null && echo -n "done"
echo "."
elif [ $system = redhat ]; then
action "Running dahdi_cfg: " $DAHDI_CFG_CMD
fi
RETVAL=$?
if [ "$LOCKFILE" != '' ]; then
[ $RETVAL -eq 0 ] && touch $LOCKFILE
fi
if [ -x "$FXOTUNE" ] && [ -r /etc/fxotune.conf ]; then
# Allowed to fail if e.g. Asterisk already uses channels:
$FXOTUNE -s || :
fi
# Do not try to call xpp_sync if there are no Astribank devices
# installed.
if test -e /sys/bus/astribanks; then
# Set the right Astribanks ticker:
LC_ALL=C xpp_sync "$XPP_SYNC"
fi
hpec_start
;;
stop)
# Unload drivers
#shutdown_dynamic # FIXME: needs test from someone with dynamic spans
echo -n "Unloading DAHDI hardware modules: "
if unload_modules; then
echo "done"
else
echo "error"
fi
if [ "$LOCKFILE" != '' ]; then
[ $RETVAL -eq 0 ] && rm -f $LOCKFILE
fi
;;
unload)
unload_modules
;;
restart|force-reload)
$0 stop
$0 start
;;
reload)
if [ $system = debian ]; then
echo -n "Rerunning dahdi_cfg: "
$DAHDI_CFG_CMD 2> /dev/null && echo -n "done"
echo "."
elif [ $system = redhat ]; then
action "Rerunning dahdi_cfg: " $DAHDI_CFG_CMD
fi
RETVAL=$?
;;
status)
if [ -d /proc/dahdi ]; then
/usr/sbin/lsdahdi
RETVAL=0
else
RETVAL=3
fi
;;
*)
echo "Usage: dahdi {start|stop|restart|status|reload|unload}"
exit 1
esac
exit $RETVAL