* CLR while idle is broken after 7031856cd7
Cancel Location Request arriving while UE is idle will not proceed to paging due to this check for S1 connection. Using new flag "isAnswer" to bypass this check to allow paging to occur when we are not doing a AIA/ULA related procedure.
* No Context Setup is required when sending the detach request. If the paging was due to wanting to send a Detach Request to the UE, then we fast track to sending the detach request.
* emm-sm.c:
In the case of MME initiated detach while UE is idle, there is no initial conext setup. We go right from the service request after paging into sending the detach request. TS23.401
mme-path.c:
Using nas_eps.type in the case of MME Initiated Detach while UE is idle does not work. nas_eps.type would represent the service request.
mme-s11-handler.c:
After S11 action, no action should be taken. We want to wait for the detach accept from the UE before proceeding with the S1 release (detach).
* InitialContextSetup should occur for detach.
- Added diameter dictionary definitions for Cancel Location
- Cancel Location will completely remove UE from MME, allow for a fresh IMSI attach to occur on next attempt.
- T3422 is used for detach request.
- Added new handling for s6a events in mme-sm, as not all s6a messages are at attach now. Maybe there's something in a state machine I should've been using here instead of a new flag?
- Testing was completed with UE in idle and connected. With CLR flags indicating re-attach required and without. Also sending CLR after UE detach. And then sending again when mme_ue is empty.
Found no support for HSS provided charging characteristics. Following TS32.251 A.4:
- Use PDN level CC, if one wasn't provided then use subscription level CC
- Don't send CC in S11 if it wasn't included
jmasterfunk84
Sukchan Lee
Spencer Sevilla