* CLR while idle is broken after 7031856cd7
Cancel Location Request arriving while UE is idle will not proceed to paging due to this check for S1 connection. Using new flag "isAnswer" to bypass this check to allow paging to occur when we are not doing a AIA/ULA related procedure.
* No Context Setup is required when sending the detach request. If the paging was due to wanting to send a Detach Request to the UE, then we fast track to sending the detach request.
* emm-sm.c:
In the case of MME initiated detach while UE is idle, there is no initial conext setup. We go right from the service request after paging into sending the detach request. TS23.401
mme-path.c:
Using nas_eps.type in the case of MME Initiated Detach while UE is idle does not work. nas_eps.type would represent the service request.
mme-s11-handler.c:
After S11 action, no action should be taken. We want to wait for the detach accept from the UE before proceeding with the S1 release (detach).
* InitialContextSetup should occur for detach.
- Added diameter dictionary definitions for Cancel Location
- Cancel Location will completely remove UE from MME, allow for a fresh IMSI attach to occur on next attempt.
- T3422 is used for detach request.
- Added new handling for s6a events in mme-sm, as not all s6a messages are at attach now. Maybe there's something in a state machine I should've been using here instead of a new flag?
- Testing was completed with UE in idle and connected. With CLR flags indicating re-attach required and without. Also sending CLR after UE detach. And then sending again when mme_ue is empty.
When a UE that requests slices tries to connect and there are no slices configured, the reject message is:
5GMM cause = 0x7 (5GS Services not allowed)
however it should be:
5GMM cause = 0x3e (No network slices available)
All 5GMM cause value in reject message is reviewed in this commit
In the past only GTPv2C was supported, and had the "gtp" generic prefix.
Later on, GTPv1C support was added, and "gtp1" prefix was used.
Let's move GTPv2C specific bits to have "gtp2" prefix too, and leave
"gtp" prefix for generic stuff among different GTP versions.
All process will be forcely exited if it failed to encode the S1AP/NGAP/GTP/PFCP message. It is to make sure there was no problem with the encoding of open5gs.
The AMF shall assign a new 5G-GUTI for a particular UE:
a) during a successful initial registration procedure;
b) during a successful registration procedure
for mobility registration update; and
c) after a successful service request procedure invoked as a response
to a paging request from the network and before the release
of the N1 NAS signalling connection as specified in subclause 5.4.4.1.
The AMF should assign a new 5G-GUTI for a particular UE
during a successful registration procedure
for periodic registration update. The AMF may assign a new 5G-GUTI
at any time for a particular UE by performing
the generic UE configuration update procedure.
If both Delete-Session-Request/Response and
UEContextReleaseCommand/UEContextReleaseComplete are failed at the same time,
UE cannot attach to the EPC infinitely.
So, I've add the protection code
if timer expires when MME does not receive Delete-Session-Response.
In TS24.501 Ch 5.5.1.3.8 Abnormal cases on the network side
d) REGISTRATION REQUEST with 5GS registration type IE set to
"mobility registration updating" or "periodic registration updating"
received after the REGISTRATION ACCEPT message has been sent and
before the REGISTRATION COMPLETE message is received.
Since, we have to do this special case, it is desirable
to handle it directly inside the state(gmm-sm.c).
If Initial UE Message with Service Request is received and
There is no Session Context
(e.g due to UEContextReleaseRequest or InitialContextSetupFailure)
MME will sends Service Reject NAS message.
* HACK: Don't retransmit InitialContextSetupReq
Related: #256
* HACK: Don't use buggy sa1p_copy() in eNBConfigTransfer
Related: #257
* mme: don't reject with 'IMSI is unknown in HLR' (permanent reject)
* MME: Implement S6a result -> EMM cause code mapping
Closes: #263
* Spencer: modification to Haralds fix because macros are now renamed
* MME: don't assert on MAC failures of uplink NAS frames
Closes: #267
* MME: Avoid ogs_assert() in many situations
We don't want to crash the entire program just because a message
received from an external entity didn't match some of our expectations.
* compiles fine, checked DIFFs and only difference is the ogs_assert -> ogs_expect
Sukchan Lee
jmasterfunk84
Pau Espin
Spencer Sevilla