The last time configure was run, it was run on a system that
did not enable -std=gnu11 by default, which meant that the
restrict qualifier would not be recognized on certain platforms.
This regenerates the configure files from running bootstrap.sh,
so that these should be recognized on all supported platforms.
Resolves: #586
The current STIR/SHAKEN implementation is not currently usable due
to encryption issues. Rather than trying to futz with OpenSSL and
the the current code, we can take advantage of the existing
capabilities of libjwt but we first need to add it to the
third-party infrastructure already in place for jansson and
pjproject.
A few tweaks were also made to the third-party infrastructure as
a whole. The jansson "dest" install directory was renamed "dist"
to better match convention, and the third-party Makefile was updated
to clean all product directories not just the ones currently in
use.
Resolves: #349
These were uncovered when trying to run `bootstrap.sh` with Autoconf
2.71:
* AC_CONFIG_HEADER() is deprecated in favor of AC_CONFIG_HEADERS().
* AC_HEADER_TIME is obsolete.
* $as_echo is deprecated in favor of AS_ECHO() which requires an update
to ax_pthread.m4.
Note that the generated artifacts in this commit are from Autoconf 2.69.
Resolves#139
* Remove .gitreview and switch to pulling the main asterisk branch
version from configure.ac instead.
* Replace references to JIRA with GitHub.
* Other minor cleanup found along the way.
Resolves: #39
Removed multiple patches.
Code chages in res_pjsip_pubsub due to changes in evsub.
Pjsip now calls on_evsub_state() before on_rx_refresh(),
so the sub tree deletion that used to take place in
on_evsub_state() now must take place in on_rx_refresh().
Additionally, pjsip now requires that you send the NOTIFY
from within on_rx_refresh(), otherwise it will assert
when going to send the 200 OK. The idea is that it will
look for this NOTIFY and cache it until after sending the
response in order to deal with the self-imposed message
mis-order. Asterisk previously dealt with this by pushing
the NOTIFY in on_rx_refresh(), but pjsip now forces us
to use it's method.
Changes were required to configure in order to detect
which way pjsip handles this as the two are not
compatible for the reasons mentioned above.
A corresponding change in testsuite is required in order
to deal with the small interal timing changes caused by
moving the NOTIFY send.
ASTERISK-30325
Change-Id: I50b00cac89d950d3511d7b250a1c641965d9fe7f
For most modules that interacted with app_macro, this change is limited
to no longer looking for the current context from the macrocontext when
set. Additionally, the following modules are impacted:
app_dial - no longer supports M^ connected/redirecting macro
app_minivm - samples written using macro will no longer work.
The sample needs a re-write
app_queue - can no longer a macro on the called party's channel.
Use gosub which is currently supported
ccss - no callback macro, gosub only
app_voicemail - no macro support
channel - remove macrocontext and priority, no connected line or
redirection macro options
options - stdexten is deprecated to gosub as the default and only
pbx - removed macrolock
pbx_dundi - no longer look for macro
snmp - removed macro context, exten, and priority
ASTERISK-30304
Change-Id: I830daab293117179b8d61bd4df0d971a1b3d07f6
This change adds support using the pjsip_tls_transport_restart
function for reloading the TLS certificate and key, if the filenames
remain unchanged. This is useful for Let's Encrypt and other
situations. Note that no restart of the transport will occur if
the certificate and key remain unchanged.
ASTERISK-30186
Change-Id: I9bc95a6bf791830a9491ad9fa43c17d4010028d0
A bug in menuselect can cause modules that are disabled
by default to be recompiled every time a recompilation
occurs. This occurs for module categories that are NOT
positive output, as for these categories, the modules
contained in the makeopts file indicate modules which
should NOT be selected. The existing procedure of iterating
through these modules to mark modules as present is thus
insufficient. This has led to modules with a default_enabled
tag of "no" to get deleted and recompiled every time, even
when they haven't changed.
To fix this, we now modify the mark as present behavior
for module categories that are not positive output. For
these, we start by iterating through the module tree
and marking all modules as present, then go back and
mark anything contained in the makeopts file as not
present. This ensures that makeopt selections are actually
used properly, regardless of whether a module category
uses positive output or not.
ASTERISK-29728 #close
Change-Id: Idf2974c4ed8d0ba3738a92f08a6082b234277b95
Removes some leftover build and config references to
modules that have since been removed from Asterisk.
ASTERISK-29935 #close
Change-Id: Iaefc73a23f4b2de3c6c14d928050135b6d0ef6af
Use pkg-config to detect libxml2, falling back to xml2-config if the
former is not available.
This patch ensures Asterisk continues to build on systems without
xml2-config installed.
The patch also updates the associated 'configure' files.
ASTERISK-29970 #close
Change-Id: I3c90dfe0b0590486cbb8e6d426a7c5c4199410c0
Correct typos of the following word families:
dependency
unless
random
dependencies
delimited
randomly
modules
ASTERISK-29714
Change-Id: I3920603a8dc7c0a1852d2f885e06b1144692d40e
test_voicemail_api: Use empty char* for empty_msg_ids.
chan_skinny: Fix size of calledParty to be maximum extension.
menuselect: Change Makefile to stop deprecated warnings. Added comments
test_linkedlist: 'bogus' variable was manually allocated from a macro
and the test fails if this happens but the compiler couldn't 'see' this
and returns a warning. memset to all 0's after allocation.
chan_ooh323: Fixed various indentation issues that triggered misleading
indentation warnings.
ASTERISK-29682
Reported by: George Joseph
Change-Id: If4fe42222c8444dc16828a42731ee53b4ce5cbbe
The "deprecated_in" and "removed_in" information can now be
set in MODULEINFO for a module and is then displayed in
menuselect so users can be aware of when a module is slated
to be deprecated and then removed.
ASTERISK-29337
Change-Id: I6952889cf08e0e9e99cf8b43f99b3cef4688087a
Given a scenario where a module has a dependency on both
an external library and a module if the external library was
available and the module was not an infinite loop would
occur. This happened due to the code changing the dependecy
status to no failure on each dependency checking loop
iteration, resulting in the code thinking that it had
gone from no failure to failure each time triggering another
dependency check.
This change makes it so that the old dependency status is
preserved throughout the dependency checking allowing it to
determine that after the first iteration the dependency
status does not transition from no failure to failure.
ASTERISK-28930
Change-Id: Iea06d45d9fd6d8bfd068882a0bb7e23a53ec3e84
When building check_expr2 with ASLR PIE hardening enabled the linker
fails. This is resolved by adding the regular compiler flags when
building the object files from ast_expr2f.c and ast_expr2.c.
Note: The STANDALONE define is removed because it is already defined in
_ASTCFLAGS. YY_NO_INPUT is defined so that the compile survives
'--enable-dev-mode'.
Also, a Makefile variable "CROSS_COMPILING" is added so that the
build system doesn't try to run check_expr2 when cross-compiling,
because that will fail the build as will.
ASTERISK-28685 #close
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Change-Id: If435b7db9f9ad8266245bda51c81c220f9658915
Because keypad() is exported by libtinfo, it needs to be explicitly
added to the linker options.
ASTERISK-28487 #close
Change-Id: I6c2ad5b95f422c263d078b5c0e84c111807dffc6
This change adds support for larger TLS certificates by allowing
OpenSSL to fragment the DTLS packets according to the configured
MTU. By default this is set to 1200.
This is accomplished by implementing our own BIO method that
supports MTU querying. The configured MTU is returned to OpenSSL
which fragments the packet accordingly. When a packet is to be
sent it is done directly out the RTP instance.
ASTERISK-28018
Change-Id: If2d5032019a28ffd48f43e9e93ed71dbdbf39c06
AttendedTransfer queues up attended transfer to the given extension.
This application can be useful with Custom Dynamic Features.
For example to make attended transfer to a predefined number.
features.conf
;;;
[applicationmap]
my_atxfer => *7,self,GoSub,"my_atxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=my_atxfer
TRANSFER_CONTEXT=my_transfer
[my_atxfer]
exten => s,1,AttendedTransfer(1234567890)
same => n,Return()
[my_transfer]
include => default
;;;
This application also can be used to completly redefine Attended transfer
feature using dialplan. For example:
features.conf
;;;
[featuremap]
atxfer => *7
[applicationmap]
custom_atxfer => *2,self,GoSub,"custom_atxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=custom_atxfer
TRANSFER_CONTEXT=my_transfer
[custom_atxfer]
exten => s,1,
same => n,Playback(pbx-transfer)
same => n,Read(dest,dial,10,i,3,3)
same => n,AttendedTransfer(${dest})
same => n,Return()
[my_transfer]
include => default
;;;
Change-Id: Ie5cfa455d0813cffd5c85a6fb117f07d8f0b903b
BlindTransfer redirects all channels currently bridged to the
caller channel to the specified destination.
This application can be useful with Custom Dynamic Features.
For example to make blind transfer to a predefined number.
features.conf
;;;
[applicationmap]
my_blindxfer => *6,self,GoSub,"my_blindxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=my_blindxfer
[my_blindxfer]
exten => s,1,BlindTransfer(1234567890,default)
same => n,Return()
;;;
This application also can be used to completly redefine Blind transfer
feature using dialplan. For example:
features.conf
;;;
[featuremap]
blindxfer =>
[applicationmap]
custom_blindxfer => ##,self,GoSub,"custom_blindxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=custom_blindxfer
[custom_blindxfer]
exten => s,1,
same => n,Playback(pbx-transfer)
same => n,Read(dest,dial,10,i,3,3)
same => n,BlindTransfer(${dest},default)
same => n,Return()
;;;
Change-Id: I9d55e7f69ccfd4472dec00d62771d6de8803215a
This file was added to the Subversion repository on 2007-03-15 by
Russell Bryant, a Digium employee at the time.
ASTERISK-24173 #close
Change-Id: Ie866fa9d31d550467613d362b35b03c031ee594d
When writing an RTCP report to json the code attempts to pack the "ssrc" and
"source_ssrc" unsigned integer values as a signed int value type. This of course
means if the ssrc's unsigned value is greater than that which can fit into a
signed integer value it gets converted to a negative number. Subsequently, the
negative value goes out in the json report.
This patch now packs the value as a json_int_t, which is the widest integer type
available on a given system. This should make it so the value no longer
overflows.
Note, this was caught by two failing tests hep/rtcp-receiver/ and
hep/rtcp-sender.
Change-Id: I2af275286ee5e795b79f0c3d450d9e4b28e958b0
The check for the library ncurses should use not use the header <curses.h> but
<ncurses.h>, because on some platforms <curses.h> is not a drop-in replacement
for <ncurses.h>: For example in Solaris, the symbol initscr is a typedef in
<curses.h> to a symbol which does not exist in the library ncurses (initscr32).
Simply use <ncurses.h> when you link to ncurses.
Furthermore in Solaris, the header <ncurses.h> is in a subdirectory
/usr/include/ncurses and not available via pkg-config.
ASTERISK-15331
ASTERISK-14935
ASTERISK-12382
ASTERISK-9107
Change-Id: Ife367776b0ccf17d3fefed868245376bfb93745d
I have removed the STATIC_BUILD option immediately as it has not
been maintained in many years and is non-functional.
ASTERISK-27965
Change-Id: I64783d017b86dba9ee3c7bcfb97e59889a3f76d7
Acccording to the man page for sprintf, using the same buffer for
output as one used as an input yields undefined behavior.
This patch should work around this problem.
ASTERISK-27903
Reported-by: Alexander Traud
Change-Id: I2213dcb454aff26457e2e4cc9c6821276463ae3a
In DragonFly BSD, added libraries from ports are placed into /usr/local.
Therefore, this directory must be added for the preprocessor, compiler, and
linker.
Beside that, the script ./configure was updated:
* OSARCH list was outdated and not used, removed.
* AC_CANONICAL_BUILD was not used.
* _REENTRANT, this feature test macro is obsolete.
ASTERISK-27820
Change-Id: I186d88d99cfa4de6569888e12ac97bd2f441c422
Asterisk requires GNU C extensions. On some systems certain libraries
may incorrectly push -std=c99 into CFLAGS, thus breaking the build.
This change causes that flag to be stripped so the Asterisk build is not
broken by those libraries. This change is made for both pkgconfig and
tool based libraries.
ASTERISK-27629 #close
Change-Id: I13389613b194abbac77becf90cd950dc168704db
This allows asterisk to be compiled with MALLOC_DEBUG to load modules
built without MALLOC_DEBUG. Now pre-compiled third-party modules will
still work regardless of MALLOC_DEBUG being enabled or not.
Change-Id: Ic07ad80b2c2df894db984cf27b16a69383ce0e10
This causes the root bootstrap.sh script to generate configure scripts
for both Asterisk and menuselect. This ensures that both configure
scripts are generated with the same version of autotools and avoids
situations where shared autoconf macros get modified without
regenerating the menuselect script.
Change-Id: I2bfd8537bbb63b3d46b11efabbb15eaaf9ef731a
menuselect/Makefile checks that autoconfig.h and makeopts were newer
than the '.in' files. Unfortunately running ./configure does not touch
autoconfig.h unless the contents will change.
Instead of looking at autoconfig.h we just need to ensure that makeopts
is newer than configure.
Also make change to configure.ac so bootstrap.sh doesn't re-add the
extra trailing line-feed.
Change-Id: Ief1f831d6717007f9cebb668c14e92782cd2b794
Fix instances of:
* Retreive
* Recieve
* other then
* different then
* Repeated words ("the the", "an an", "and and", etc).
* othterwise, teh
ASTERISK-24198 #close
Change-Id: I3809a9c113b92fd9d0d9f9bac98e9c66dc8b2d31
Recently menuselect has randomly produced an error stating that
configure was just run and make had to be restarted. I believe this is
due to an incorrect menuselect/Makefile rule. The original rule
produced an error if makeopts or autoconfig.h were older than
makeopts.in or autoconfig.h.in. I believe this can create an issue if
makeopts is older than autoconfig.h.in or if autoconfig.h is older than
makeopts.in. The new rules compare files independently.
Change-Id: Ibca155035fa1392c95e33cbf25f257902abba17b
menuselect detects compiler support for multiple styles of weak
functions. This is a remnant from 2013 when OPTIONAL_API required weak
functions. It is no longer correct for menuselect to switch
dependencies from optional to required based on lack of weak function
support.
Note an issue remains - dependencies should switch from optional to
required based on OPTIONAL_API being enabled or disabled. I don't think
this is possible. menuselect needs to know at startup if OPTIONAL_API
is enabled or disabled, so the only way to fix this is to remove
OPTIONAL_API from menuselect and create a configure option. I've left
the code that switches in place but it's preprocessed out.
Additionally removed:
- WEAKREF variable from Asterisk makeopts.in.
- Related disabled code from test_utils.
- Pointless AC_REVISION call from menuselect/configure.ac.
Change-Id: Ifa702e5f98eb45f338b2f131a93354632a8fb389
Naveen Albert
George Joseph
Sean Bright
Sean Bright
Mike Bradeen
Joshua C. Colp
Hugh McMaster
Alexander Traud
Josh Soref
Jaco Kroon
Sebastian Kemper
Sean Bright
Joshua Colp
George Joseph
Alexei Gradinari
Kevin Harwell
Matthew Fredrickson
Corey Farrell
Richard Mudgett