Add a timeout option to control the amount of time
to wait if no early media is received before giving
up. This allows aborting early if the destination
is not being responsive.
Resolves: #588
UserNote: The timeout argument to Dial now allows
specifying the maximum amount of time to dial if
early media is not received.
Most app_voicemail unit tests were not properly cleaning up
after themselves after running. This led to test mailboxes
lingering around in the system. It also meant that if any
unit tests in app_voicemail that create mailboxes were executed
and the module was not unloaded/loaded again prior to running
the test_voicemail_vm_info unit test, Asterisk would segfault
due to an attempt to copy a NULL string.
The load_config test did actually have logic to reinitialize
the config after the test. However, this did not work in practice
since load_config() would not reload the config since voicemail.conf
had not changed during the test; thus, additional logic has been
added to ensure that voicemail.conf is truly reloaded, after any
unit tests which modify the users list.
This prevents the SEGV due to invalid mailboxes lingering around,
and also ensures that the system state is restored to what it was
prior to the tests running.
Resolves: #629
This adds an option to allow preventing callers from leaving
messages marked as 'urgent'.
Resolves: #619
UserNote: The leaveurgent mailbox option can now be used to
control whether callers may leave messages marked as 'Urgent'.
When started with a verbose level of 3, asterisk can emit over 1500
verbose message that serve no real purpose other than to fill up
logs. When asterisk shuts down, it emits another 1100 that are of
even less use. Since the testsuite runs asterisk with a verbose
level of 3, and asterisk starts and stops for every one of the 700+
tests, the number of log messages is staggering. Besides taking up
resources, it also makes it hard to debug failing tests.
This commit changes the log level for those verbose messages to 5
instead of 3 which reduces the number of log messages to only a
handful. Of course, NOTICE, WARNING and ERROR message are
unaffected.
There's also one other minor change...
ast_context_remove_extension_callerid2() logs a DEBUG message
instead of an ERROR if the extension you're deleting doesn't exist.
The pjsip_config_wizard calls that function to clean up the config
and has been triggering that annoying error message for years.
Resolves: #582
Adds 'p' option to SpeechBackground() application.
With this option, when the app timeout is reached,
whatever the backend speech engine collected will
be returned as if it were the final, full result.
(This works for engines that make partial results.)
Resolves: #572
UserNote: The SpeechBackground dialplan application now supports a 'p'
option that will return partial results from speech engines that
provide them when a timeout occurs.
Adds the 'D' option to app chanspy that causes the input and output
frames of the spied channel to be interleaved in the spy output frame.
This allows the input and output of the spied channel to be decoded
separately by the receiver.
If the 'o' option is also set, the 'D' option is ignored as the
audio being spied is inherently one direction.
Fixes: #569
UserNote: The ChanSpy application now accepts the 'D' option which
will interleave the spied audio within the outgoing frames. The
purpose of this is to allow the audio to be read as a Dual channel
stream with separate incoming and outgoing audio. Setting both the
'o' option and the 'D' option and results in the 'D' option being
ignored.
Commit fa3922a4d2 fixed
a branching issue but "overshoots" when calculating
the next priority. This fixes that; accompanying
test suite tests have also been extended.
Resolves: #560
The numeric bridge profile options `internal_sample_rate` and
`maximum_sample_rate` are documented to accept the special values
`auto` and `none`, respectively. While these values currently work,
they also emit warnings when used which could be confusing for users.
In passing, also ensure that we only accept the documented range of
sample rate values between 8000 and 192000.
Fixes#546
When app_macro was deprecated, the macrocontext column was removed from
the INSERT statement but the binds were not renumbered. This broke the
insert.
This change removes the macrocontext column via alembic and re-numbers
the existing columns in the INSERT.
Fixes: #527
UserNote: The fix requires removing the macrocontext column from the
voicemail_messages table in the voicemail database via alembic upgrade.
UpgradeNote: The fix requires that the voicemail database be upgraded via
alembic. Upgrading to the latest voicemail database via alembic will
remove the macrocontext column from the voicemail_messages table.
This fixes faulty branching logic for the
EndIf application. Instead of computing
the next priority, which should be done
for false conditionals or ExitIf, we should
simply advance to the next priority.
Resolves: #341
This fixes a number of broken links throughout the
tree, mostly caused by wiki.asterisk.org being replaced
with docs.asterisk.org, which should eliminate the
need for sporadic fixes as in f28047db36.
Resolves: #430
Resolves: #462
UserNote: The option "j" is now available for the Dial application which
uses the initial stream topology of the caller to create the outgoing
channels.
Resequencing is a process that occurs when we open a voicemail folder
and discover that there are gaps between messages (e.g. `msg0000.txt`
is missing but `msg0001.txt` exists). Resequencing involves shifting
the existing messages down so we end up with a sequential list of
messages.
Currently, this process stops after reaching a threshold based on the
message limit (`maxmsg`) configured on the current folder. However, if
`maxmsg` is lowered when a voicemail folder contains more than
`maxmsg + 10` messages, resequencing will not run completely leaving
the mailbox in an inconsistent state.
We now resequence up to the maximum number of messages permitted by
`app_voicemail` (currently hard-coded at 9999 messages).
Fixes#86
Any function or application that accepts a `&`-separated list of
filenames can now include a literal `&` in a filename by wrapping the
entire filename in single quotes, e.g.:
```
exten = _X.,n,Playback('https://example.com/sound.cgi?a=b&c=d'&hello-world)
```
Fixes#172
UpgradeNote: Ampersands in URLs passed to the `Playback()`,
`Background()`, `SpeechBackground()`, `Read()`, `Authenticate()`, or
`Queue()` applications as filename arguments can now be escaped by
single quoting the filename. Additionally, this is also possible when
using the `CONFBRIDGE` dialplan function, or configuring various
features in `confbridge.conf` and `queues.conf`.
Fixes a crash due to a lack of proper reference on the nativeformats
object before passing it into ast_request(). Also found potentially
similar use case bugs in app_chanisavail.c, bridge.c, and bridge_basic.c
Fixes: #388
This adds optional ADSI support to the Directory
application, which allows callers with ADSI CPE
to navigate the Directory system significantly
faster than is possible using the audio prompts.
Callers can see the directory name (and optionally
extension) on their screenphone and confirm or
reject a match immediately rather than waiting
for it to be spelled out, enhancing usability.
Resolves: #356
This adds an AMI event that is emitted whenever a
mailbox password is successfully changed, allowing
AMI consumers to process these.
UserNote: The VoicemailPasswordChange event is
now emitted whenever a mailbox password is updated,
containing the mailbox information and the new
password.
Resolves: #398
If ADSI is available on a channel, app_voicemail will repeatedly
try to use ADSI, even if there is no CPE that supports it. This
leads to many unnecessary delays during the session. If ADSI is
available but ADSI setup fails, we now disable it to prevent
further attempts to use ADSI during the session.
Resolves: #354
This newly introduced periodic-announce-startdelay makes it possible to
configure the initial start delay of the first periodic announcement
after which periodic-announce-frequency takes over.
UserNote: Introduce a new queue configuration option called
'periodic-announce-startdelay' which will vary the normal (historic)
behavior of starting the periodic announcement cycle at
periodic-announce-frequency seconds after entering the queue to start
the periodic announcement cycle at period-announce-startdelay seconds
after joining the queue. The default behavior if this config option is
not set remains unchanged.
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
If the called party hangs up while digits are being
sent, -1 is returned to indicate so, but app_dial
was not checking the return value, resulting in
the hangup being lost and looping forever until
the caller manually hangs up the channel. We now
abort if digit sending fails.
ASTERISK-29428 #close
Resolves: #281
This reverts commit 617dad4cba.
apps/app_stack.c: Revert buggy gosub patch
This seems to break the case when a predial macro calls a gosub.
When the gosub calls return, the Return function outputs:
app_stack.c:423 return_exec: Return without Gosub: stack is empty
This returns -1 to the calling macro, which returns to app_dial
and causes the call to hangup instead of proceeding with the macro
that invoked the gosub.
Resolves: #253
The app_queue module provides both an AMI action and a CLI command
to change the priority of a caller in a queue. Up to now this change
of priority has only been reflected to new callers into the queue.
This change adds an "immediate" option to both the AMI action and
CLI command which immediately applies the priority change respective
to the other callers already in the queue. This can allow, for example,
a caller to be placed at the head of the queue immediately if their
priority is sufficient.
Resolves: #202
UserNote: The 'queue priority caller' CLI command and
'QueueChangePriorityCaller' AMI action now have an 'immediate'
argument which allows the caller priority change to be reflected
immediately, causing the position of a caller to move within the
queue depending on the priorities of the other callers.
in a particular mailbox folder. The forward command can be used
to copy a message within a mailbox or to another mailbox. Also adds
a VoicemailBoxSummarry, required to retrieve message ID's.
Resolves: #181
UserNote: The following manager actions have been added
VoicemailBoxSummary - Generate message list for a given mailbox
VoicemailRemove - Remove a message from a mailbox folder
VoicemailMove - Move a message from one folder to another within a mailbox
VoicemailForward - Copy a message from one folder in one mailbox
to another folder in another or the same mailbox.
Adds CLI commands to allow move/remove/forward individual messages
from a particular mailbox folder. The forward command can be used
to copy a message within a mailbox or to another mailbox. Also adds
a show mailbox, required to retrieve message ID's.
Resolves: #170
UserNote: The following CLI commands have been added to app_voicemail
voicemail show mailbox <mailbox> <context>
Show contents of mailbox <mailbox>@<context>
voicemail remove <mailbox> <context> <from_folder> <messageid>
Remove message <messageid> from <from_folder> in mailbox <mailbox>@<context>
voicemail move <mailbox> <context> <from_folder> <messageid> <to_folder>
Move message <messageid> in mailbox <mailbox>&<context> from <from_folder> to <to_folder>
voicemail forward <from_mailbox> <from_context> <from_folder> <messageid> <to_mailbox> <to_context> <to_folder>
Forward message <messageid> in mailbox <mailbox>@<context> <from_folder> to
mailbox <mailbox>@<context> <to_folder>
Fixes two compilation errors in app_voicemail_imap, one due to an unsed
variable and one due to a new variable added in the incorrect location
in _163.
Resolves: #174
Some callers of __messagecount did not correctly handle error return,
instead returning a -1 message count.
This caused a notification with "Messages-Waiting: yes" and
"Voice-Message: -1/0 (0/0)" if the IMAP server was unavailable.
Fixes: #64
This adds an option 'force_longest_waiting_caller' which changes the
global behavior of the queue engine to prevent queue callers from
'jumping ahead' when an agent is in multiple queues.
Resolves: #108
Also closes old asterisk issues:
- ASTERISK-17732
- ASTERISK-17570
Change-Id: I0f84e27903fefbe2018d0afa2d67b23aa0b321ce
* app_followme: fix issue with enable_callee_prompt=no
If the FollowMe option 'enable_callee_prompt' is set to 'no' then Asterisk
incorrectly sets a winner channel to the channel from which any control frame was read.
This fix sets the winner channel only to the answered channel.
Resolves: #87
ASTERISK-30326
When Asterisk is restarted it does not preserve paused reason for
members of realtime queues. This was fixed for non-realtime queues in
ASTERISK_25732
Resolves: #66
UpgradeNote: Add a new column to the queue_member table:
reason_paused VARCHAR(80) so the reason can be preserved.
UserNote: Make paused reason in realtime queues persist an
Asterisk restart. This was fixed for non-realtime
queues in ASTERISK_25732.
This removes the dependency of the SLAStation and SLATrunk
applications on app_meetme, in anticipation of the imminent
removal of the deprecated app_meetme module.
The user interface for the SLA applications is exactly the
same, and in theory, users should not notice a difference.
However, the SLA applications now use ConfBridge under the
hood, rather than MeetMe, and they are now contained within
their own module.
Resolves: #50
ASTERISK-30309
UpgradeNote: The SLAStation and SLATrunk applications have been moved
from app_meetme to app_sla. If you are using these applications and have
autoload=no, you will need to explicitly load this module in modules.conf.
The F option in the xmldocs for the Queue application
was erroneously duplicated, causing it to display
twice on the wiki. The two sections are now merged into one.
Additionally, the description for the d option was quite
vague. Some more details are added to provide context
as to what this actually does.
ASTERISK-30486 #close
Change-Id: I6706cea708b5cc781f59f8652c2cb377e55aed7e
While it is possible to create multiple mixmonitor instances
on a channel, it was not previously possible to mute individual
instances.
This change includes the ability to specify the MixMonitorID
when calling the manager action: MixMonitorMute. This will
allow an individual MixMonitor instance to be muted via id.
This id can be stored as a channel variable using the 'i'
MixMonitor option.
As part of this change, if no MixMonitorID is specified in
the manager action MixMonitorMute, Asterisk will set the mute
flag on all MixMonitor spy-type audiohooks on the channel.
This is done via the new audiohook function:
ast_audiohook_set_mute_all.
ASTERISK-30464
Change-Id: Ibba8c7e750577aa1595a24b23316ef445245be98
This newly introduced periodic-announce-startdelay makes it possible to
configure the initial start delay of the first periodic announcement
after which periodic-announce-frequency takes over.
ASTERISK-30437 #close
Change-Id: Ia79984b6377ef78f167ad9ea2ac084bec29955d0
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
DTMF frames are not handled in app_dial when sent towards the
caller. This means that if DTMF is sent to the calling party
and the call has not yet been answered, the DTMF is not audible.
This is now fixed by relaying DTMF frames if only a single
destination is being dialed.
ASTERISK-29516 #close
Change-Id: Iafd7430ac2915126d42dc48f0b73b262452ee027
Adds 'e' option to allow Read() to return the terminator as the
dialed digits in the case where only the terminator is entered.
ie; if "#" is entered, return "#" if the 'e' option is set and ""
if it is not.
ASTERISK-30411
Change-Id: I49f3221824330a193a20c660f99da0f1fc2cbbc5
Adds 's' option to skip calling the extension and instead set the
extension as DIRECTORY_EXTEN channel variable.
ASTERISK-30405
Change-Id: Ib9d9db1ba5b7524594c640461b4aa8f752db8299
Adds a new option to SendDTMF() which will answer the specified
channel if it is not already up. If no channel is specified, the
current channel will be answered instead.
ASTERISK-30422
Change-Id: Iddcbd501fcdf9fef0f453b7a8115a90b11f1d085
Several queue fields were not being set to their default value during
a reload.
Additionally added some sample configuration options that were missing
from queues.conf.sample.
Change-Id: I3a88c7877af91752b1b46a0c087384f7eb9c47e4
Adds the Signal and WaitForSignal
applications, which can be used for inter-channel
signaling in the dialplan.
Signal supports sending a signal to other channels
listening for a signal of the same name, with an
optional data payload. The signal is received by
all channels waiting for that named signal.
ASTERISK-29810 #close
Change-Id: Ic34439de3d60f8609357666a465c354d81f5fef3
Adds option to app_directory to specify a filename from which to
read configuration instead of voicemail.conf ie;
same => n,Directory(,,c(directory.conf))
This configuration should contain a list of extensions using the
voicemail.conf format, ie;
2020=2020,Dog Dog,,,,attach=no|saycid=no|envelope=no|delete=no
ASTERISK-30404
Change-Id: Id58ccb1344ad1e563fa10db12f172fbd104a9d13
In Asterisk 11, if a channel was redirected away during Playback(),
the PLAYBACKSTATUS variable would be set to SUCCESS. In Asterisk 12
(specifically commit 7d9871b394) that
behavior was inadvertently changed and the same operation would result
in the PLAYBACKSTATUS variable being set to FAILED. The Asterisk 11
behavior has been restored.
Partial fix for ASTERISK~25661.
Change-Id: I53f54e56b59b61c99403a481b6cb8d88b5a559ff
Naveen Albert
Shaaah
George Joseph
cmaj
Mike Bradeen
Sean Bright
Maximilian Fridrich
Matthew Fredrickson
Jaco Kroon
zhengsh
Joshua C. Colp
Olaf Titz
Nathan Bruning
alex2grad
Niklas Larsson